Measured depth definition

Measured depth means the total length of the well bore.
Sample 1Sample 2Sample 3
Measured depth means, in respect of a well event, the longest distance, in metres, along the bore of the well from the kelly bushing of the well to
Sample 1Sample 2
Measured depth. True Vertical Depth: Max Inclination: Max Dog Leg Severity: Borehole Fluid Type: BHP psi (hydrostatic): Borehole Fluid Wt (ppg): Max Well Head Press: BHT degrees F: Max Flow Rate:
Sample 1

Examples of Measured depth in a sentence

  • Measured depth, on the other hand, reports the estimated distance of the vertical section of the well.

  • Measured depth to fill level in these sensors was found approximately to correlate to reported depth to fill level.

  • Measured depth of top soil and marlites were suitable, quality of marlite embedding into original dump surface was a little problem sometimes.Forestry and other reclamation prevails on the Radovesice dump, agricultural recultivation is less implemented, and hydrologic reclamation is minimum used.

  • Measured depth of elements of foundation in relations to finish first floor datum.

  • Measured depth profiles for the four different flow regimes are plotted on Figures 15 to 18.

  • Measured depth and pay depth of manholes and inlets shall conform to the following: Table 604-1MEASURED DEPTH AND PAY DEPTH OF MANHOLES AND INLETSMeasured DepthPay Depth0.0 to 5.0 feet5 feet5.1 to 10.0 feet10 feet10.1 to 15.0 feet15 feet(Continued thus) Meter vaults will be measured by the complete unit including ring and cover.

  • Table 3-4: Pre/Post Sampling Groundwater Depth to Water Location NameTotal Depth of Boring (ft)Measured DTW* (ft) Location NameTotal Depth of Boring (ft)Measured DTW* (ft) *Measured depth to water (DTW) prior to sampling collected from the ground surface**Final DTW collected after sampling from the ground surfaceSoil cores generated from the installation of the temporary wells were visually observed and documented for discoloration and screened for VOCs using a PID.

  • Measured depth was then corrected for measured tides in Seattle and compared with the similarly tide-corrected water depth reported by the SPI survey navigator (C.

  • Measured depth (MD) is the distance, expressed in metres, measured from the Kelly Bushing of the drilling rig to the bottom or end of the wellbore.

  • Measured depth and pay depth of manholes and inlets shall conform to the following.


More Definitions of Measured depth

Measured depth. , in relation to a well, means the measured length of the well-bore of the well;
Sample 1
Measured depth means, for each well event, the longest distance in metres according to the records of the Board, measured along the bore of the well from the kelly bushing of the well to the base of the deepest producing interval that
Sample 1
Measured depth means the total length measured in feet of the entire wellbore.
Sample 1

Related to Measured depth

  • Measurement Point means the emission source for which continuous emission measurement systems (CEMS) are used for emission measurement, or the cross-section of a pipeline system for which the CO2 flow is determined using continuous measurement systems;

  • Applicable Measurement Period means the most recently completed four consecutive fiscal quarters of the Issuer immediately preceding the Applicable Calculation Date for which internal financial statements are available.

  • Measurement means metered volumes at a custody transfer meter through a turbine, Coriolis, or such other meter.

  • Performance Measurement Period has the meaning set forth in Section 3.1(e)(ii).

  • Measurement Period shall have the meaning specified in Section 14.01(b)(i).

  • Latest Level means, in respect of an Inflation Index, the latest level of such Inflation Index (excluding any "flash" estimates) published or announced by the relevant Inflation Index Sponsor prior to the month in respect of which the Substitute Index Level is being determined.

  • Elevated blood lead level means a level of lead in blood that is any of the following:

  • DBRS Equivalent Rating means, with respect to any date and any Person with respect to whom DBRS does not maintain a public Relevant DBRS Rating as of such date,

  • Adjusted Total turnover means the turnover in a State or a Union territory, as defined under sub-section (112) of section 2, excluding the value of exempt supplies other than zero-rated supplies, during the relevant period;

  • Measurement Time means 12:01 a.m. Eastern Time on the Closing Date.

  • Mean Sea Level means the average height of the sea for all stages of the tide. It is used as a reference for establishing various elevations within the floodplain. For the purposes of this Ordinance, the term is synonymous with the National Geodetic Vertical Datum (NGVD) of 1929, the North American Vertical Datum (NAVD) of 1988, or other datum, to which Base Flood Elevations shown on a community's Flood Insurance Rate Map are referenced.

  • Sound level meter means an instrument which includes a microphone, amplifier, RMS detector, integrator or time averager, output meter, and weighting networks used to measure sound pressure levels.

  • Metering Point means, for meters that do not use instrument transformers, the point at which the billing meter is connected. For meters that use instrument transformers, the point at which the instrument transformers are connected.

  • Daily Measurement Value means the Specified Dollar Amount (if any), divided by 40.

  • Top-Heavy Ratio means the following:

  • Relevant Test Period With respect to any Loan, the relevant test period for the calculation of Net Senior Leverage Ratio, Interest Coverage Ratio, Total Net Leverage Ratio or EBITDA as applicable, for such Loan in accordance with the related Underlying Instruments or, if no such period is provided for therein, (i) for Obligors delivering monthly financial statements, each period of the last twelve (12) consecutive reported calendar months, and (ii) for Obligors delivering quarterly financial statements, each period of the last four (4) consecutive reported fiscal quarters of the principal Obligor on such Loan; provided that with respect to any Loan for which the relevant test period is not provided for in the related Underlying Instruments, if an Obligor is a newly-formed entity as to which twelve (12) consecutive calendar months have not yet elapsed, “Relevant Test Period” shall initially include the period from the date of formation of such Obligor to the end of the twelfth (12th) calendar month or fourth (4th) fiscal quarter (as the case may be) from the date of formation, and shall subsequently include each period of the last twelve (12) consecutive reported calendar months or four (4) consecutive reported fiscal quarters (as the case may be) of such Obligor.

  • Calibration gas means a gas mixture used to calibrate gas analysers.

  • HICP Daily Inflation Reference Index means (A) in relation to the first day of any given month, the HICP Monthly Reference Index of the third month preceding such month, and (B) in relation to a day (D) (other than the first day) in any given month (M), the linear interpolation of the HICP Monthly Reference Index pertaining respectively to the third month preceding such month (M - 3) and the second month preceding such month (M - 2) calculated in accordance with the following formula:

  • Net weight means the weight of a commodity excluding any materials, substances, or items not considered to be part of the commodity. Materials, substances, or items not considered to be part of the commodity include containers, conveyances, bags, wrappers, packaging materials, labels, individual piece coverings, decorative accompaniments, prizes, coupons, and, in the case of edible commodities, anything that is nonedible.

  • Operating parameter value means a minimum or maximum value established for a control device or process parameter that, if achieved by itself or in combination with one (1) or more other operating parameter values, determines that an owner or operator has complied with an applicable emission limit.

  • Aggregate Industry Equivalent Unit Score is then calculated for each S&P Industry Classification, shown on Schedule 2, and is equal to the sum of the Equivalent Unit Scores for each issuer in such industry classification group.

  • Annual summative evaluation rating means an annual evaluation rating that is based on appraisals of educator practice and student performance, and includes all measures captured in a teacher’s evaluation rubric. The four summative performance categories are ineffective, partially effective, effective, and highly effective.

  • Performance Period means the one or more periods of time, which may be of varying and overlapping durations, as the Committee may select, over which the attainment of one or more Performance Goals will be measured for the purpose of determining a Participant’s right to, and the payment of, a Performance-Based Award.

  • Net metering period means the 12-month period following the date of final interconnection of the

  • Maximum residual disinfectant level or “MRDL” means a level of a disinfectant added for water treatment that may not be exceeded at the consumer’s tap without an unacceptable possibility of adverse health effects.

  • Floor Area Ratio (FAR) means the quotient obtained by dividing the total covered area (plinth area) on all floors by the area of plot.