Minimum Pressure definition

Minimum Pressure means the minimum pressure at which MDL will operate the Maui Pipeline, being 31 bar absolute.
Sample 1Sample 2Sample 3
Minimum Pressure means the minimum pressure as detailed in the Price and Service Plan.
Sample 1Sample 2Sample 3
Minimum Pressure means for each calendar year, the minimum pressure for delivery of Water at the Point of Delivery for that year determined according to the provisions of the attached Schedule “D”;
Sample 1Sample 2

Examples of Minimum Pressure in a sentence

  • In normal operational circumstances Minimum Pressure at a hydrant or nodal point on the system shall be 15 mH or 1.5 Bar Maximum Design Pressure (MDP) which is equal to Design Pressure plus allowance for surge, shall not exceed Pressure Nominal (PN) which is the pressure rating of the lowest rated component in the system.

  • In all cases, any infractions will be penalised by the Stewards.28.10 Camber and PressureValues for the Maximum Camber and Minimum Pressure of tyres may be issued during any Event and monitored at any time.

  • SDR9, Minimum Pressure Class 160, Pressure Pipe and Tubing, ½ In. Through 3 In, for Water Service.

  • Any data obtained by the Commissioner under this subsection is proprietary and confidential and is not a public record under G.S. 132-1 or G.S. 58-2-100.Commissioner.

  • The goals included: Maximum Pressure: 110 psi Minimum Pressure (measured at main): 65 psi Design velocity range: 2 - 5 fps Minimum main diameter: 2-in. Pumps sized for peak hour demands. One standby pump. Minimum pump efficiency of 75%. Industrial users will provide storage for the user’s maximum day demand. Establish optimum phasing of infrastructure expansions to meet projected demands.

  • Optimization of Venturimeter Geometry for Minimum Pressure Drop using CFD Analysis.

  • We will use our best endeavours to ensure that the water we supply to your property is at a Minimum Pressure at the Connection Point.

  • Peak Values of Minimum Pressure Coefficients (Cp) with and without Solar Panels (Iverson 2016) Wind Angle Table 2-6.

  • We will use our best endeavours to ensure that the Water we supply to your property is at a Minimum Pressure at the Connection Point.

  • Lessee shall pay to Lessor as supplemental rent, without notice, demand, set off or counterclaim, in advance in advance the annual sum set forth on Schedule 1 attached hereto under the heading “Supplemental Rent” for the Nittany Valley Lease (the “Supplemental Rent”), payable in advance in equal, consecutive monthly installments, beginning on the Effective Date, and continuing on the first day of each calendar month thereafter until April 12, 2011.


More Definitions of Minimum Pressure

Minimum Pressure has the meaning given to it at Schedule D hereto;
Sample 1Sample 2
Minimum Pressure means the minimum pressure at which gas is supplied to a customer.
Sample 1Sample 2
Minimum Pressure means the minimum pressure of as detailed in the Price and Service Plan. Minister means the Minister for Primary Industries and Water.
Sample 1
Minimum Pressure means 375 psig. (nn) MMBtu" means one million (1,000,000) Btu.
Sample 1
Minimum Pressure means the minimum pressure specified in the Instrument of Agreement.
Sample 1
Minimum Pressure means a pressure sufficient to allow Gas delivered at a Gas Delivery Point to be transported through the applicable Gas Receipt Facilities and to enter the Combustion Turbine(s) assuming that the applicable Gas Receipt Facilities and Combustion Turbine(s) are in good condition and proper working order and are being operated according to good industry practices and Prudent Generator Practices.
Sample 1

Related to Minimum Pressure

  • Working pressure means the settled pressure of a compressed gas at a reference temperature of 15 °C in a full pressure receptacle;

  • design pressure means the maximum pressure that a pressure vessel or plant is designed to withstand safety when operating normally;

  • Operating pressure means the pressure at which the parts of an irrigation system are designed by the manufacturer to operate.

  • Pressure means relative pressure versus atmospheric pressure, unless otherwise stated.

  • Minimum Price shall have the meaning specified in Section 7.1(d).

  • Reid vapor pressure means the vapor pressure of crude oil or other volatile petroleum products at 100 degrees Fahrenheit as determined by the latest edition of ASTM D6377 (RVPE): Standard Test Method for Determination of Vapor Pressure of Crude Oil.

  • tons means the gross tonnage calculated in accordance with the tonnage measurement regulations contained in Annex I of the International Convention on Tonnage Measurement of Ships, 1969; the word “tonnage” shall be construed accordingly.

  • Pressure vessel means a vessel that may be used for containing, storing, distributing, transferring, distilling, processing or otherwise handling any gas, vapour or liquid under pressure greater than the atmospheric pressure and includes any pipeline fitting or other equipment attached thereto or used in connection therewith; and

  • Blend means seed consisting of more than one variety of a kind, each in excess of five percent by weight of the whole.

  • Low water pressure means water pressure below the regulatory reference level which is the minimum pressure when demand on the system is not abnormal.

  • Positive pressure respirator means a respirator in which the pressure inside the respiratory inlet covering exceeds the ambient air pressure outside the respirator.

  • True vapor pressure means the equilibrium partial pressure exerted by a petroleum liquid as determined in accordance with methods described in American Petroleum Institute (API) Bulletin 2517, Evaporation Loss from External Floating Roof Tanks, 1980. The API procedure may not be applicable to some high viscosity or high pour crudes. Available estimates of true vapor pressure may be used in special cases such as these.

  • Vapor pressure as herein used means Vapor Pressure at 100° Fahrenheit as determined by ASTM Method D-323-90, "Standard Method of Test for Vapor Pressure of Petroleum Products (Reid Method)."

  • Load means energy consumed by Customers together with allocated losses and unaccounted for energy;

  • Minimum Order Quantity means the minimum number of batches of a Product to be produced during the same cycle of manufacturing as set forth in a Product Agreement on Schedule B;

  • Minimum Hourly Work Requirement means the work hours over a given time period that are required of you by your Employer in order to be eligible for coverage. Your Minimum Hourly Work Requirement is specified in the Schedule of Benefits.

  • Process weight means the total weight of all materials introduced into any source operation. Solid fuels charged will be considered as part of the process weight, but liquid and gaseous fuels and combustion air will not.

  • Tare Weight means the weight of an empty shipping container, excluding all materials used for wrapping, cushioning, banding, waterproofing, packaging, blocking and bracing articles within the exterior container.

  • Slash means all debris created on the Work area by the precommercial thinning operation.

  • Water quality volume means the volume equal to the first one-half inch of runoff multiplied by the impervious surface of the land development project.

  • Small quantity generator means a generator who generates less than 1000 kg of hazardous waste in a calendar month.

  • Finished water means the water that is introduced into the distribution system of a public water system and is intended for distribution and consumption without further treatment, except as treatment necessary to maintain water quality in the distribution system (e.g., booster disinfection, addition of corrosion control chemicals).

  • Sewage sludge weight means the weight of sewage sludge, in dry U.S. tons, including admixtures such as liming materials or bulking agents. Monitoring frequencies for sewage sludge parameters are based on the reported sludge weight generated in a calendar year (use the most recent calendar year data when the NPDES permit is up for renewal).

  • Biodiesel means a fuel composed of mono-alkyl esters of long chain fatty acids derived from vegetable oils or animal fats, and, in accordance with standards specified by the American society for testing and materials, designated B100, and meeting the requirements of D-6751, as approved by the department of agriculture.

  • height means the vertical distance between grade and the highest point of the building or structure;

  • Diatomaceous earth filtration means a process resulting in substantial particulate removal in which (1) a precoat cake of diatomaceous earth filter media is deposited on a support membrane (septum), and (2) while the water is filtered by passing through the cake on the septum, additional filter media known as body feed is continuously added to the feed water to maintain the permeability of the filter cake.