Nominal Design Capacity definition

Nominal Design Capacity means, with respect to a FGRS, the sum of the capacities, in mscf per Day, of the installed flare gas recovery Compressors,
Sample 1Sample 2Sample 3
Nominal Design Capacity shall have the meaning ascribed to such term in Section 5.A(2).
Sample 1Sample 2
Nominal Design Capacity means a demonstrated capability to gather (at the pressures required under Section 6.A below) and Process, as applicable, the volume of Gas described for such Sub Phase, regardless of whether a volume of Gas equaling such volume is available or was in fact so gathered or processed. Such gathering and processing capabilities shall be deemed to have been demonstrated when the following procedures have been completed:
Sample 1Sample 2

Examples of Nominal Design Capacity in a sentence

  • A particular listed Sub Phase of the Phase V Expansion shall be deemed to be complete when the below described testing, modeling and calculations are performed and demonstrate that the East Side portion of the Gathering System and the Plant have the respective Nominal Design Capacity listed above for that Sub Phase.

  • This FGRS consists of a single staged liquid ring reciprocating compressor with a Nominal Design Capacity to recover a total flow of Potentially Recoverable Gas of 693 actual cubic feet per minute (or approximately 41.6 kscfh (1 MMscfd).


More Definitions of Nominal Design Capacity

Nominal Design Capacity means, with respect to the FGRS, the capacity, in mmscf per Day, of the installed Flare gas recovery Compressor, excluding the capacity of any installed duplicate spare Compressor or warehouse spare Compressor.
Sample 1Sample 2

Related to Nominal Design Capacity

  • Design capacity means the volume of a containment feature at a discharging facility that accommodates all permitted flows and meets all Aquifer Protection Permit conditions, including allowances for appropriate peaking and safety factors to ensure sustained, reliable operation.

  • Licensed capacity means the number of children the Department has determined the day care home can care for at any one time in addition to any children living in the home who are under the age of 12 years. Children age 12 and over on the premises are not considered in determining licensed capacity.

  • Nameplate Capacity means the maximum electrical generating output (in MWe) that a generator can sustain over a specified period of time when not restricted by seasonal or other deratings as measured in accordance with the United States Department of Energy standards.

  • Project Capacity means the AC capacity of the project at the generating terminal(s) and to be contracted with MSEDCL for supply from the Solar Power Project.

  • System Capacity means the operational capacity of the System at any applicable point in time.

  • Nominal Rated Capability means the nominal maximum rated capability in megawatts of a Transmission Interconnection Customer’s Customer Facility or the nominal increase in transmission capability in megawatts of the Transmission System resulting from the interconnection or addition of a Transmission Interconnection Customer’s Customer Facility, as determined in accordance with pertinent Applicable Standards and specified in the Interconnection Service Agreement.

  • Technical Capacity means the maximum firm capacity that the transmission system operator can offer to the network users, taking account of system integrity and the operational requirements of the transmission network;

  • Nominal Capacity means the volume indicated by the manufacturer that represents the maximum recommended filling level.

  • Bid Capacity meanss capacity offered by the bidder in his Bid under invitation.

  • Reserved Capacity means the maximum amount of capacity and energy that the Transmission Provider agrees to transmit for the Transmission Customer over the Transmission Provider’s Transmission System between the Point(s) of Receipt and the Point(s) of Delivery under Tariff, Part II. Reserved Capacity shall be expressed in terms of whole megawatts on a sixty (60) minute interval (commencing on the clock hour) basis.

  • Contract Capacity has the meaning set forth in Section 3.1(f).

  • New Capacity means a new Generator, a substantial addition to the capacity of an existing Generator, or the reactivation of all or a portion of a Generator that has been out of service for five years or more that commences commercial service after the effective date of this definition. For purposes of Section 23.4.5 of this Attachment H, “Offer Floor” for a Mitigated Capacity Zone Installed Capacity Supplier that is not a Special Case Resource shall mean the lesser of (i) a numerical value equal to 75% of the Mitigation Net CONE translated into a seasonally adjusted monthly UCAP value (“Mitigation Net CONE Offer Floor”), or (ii) the numerical value that is the first year value of the Unit Net CONE determined as specified in Section 23.4.5.7, translated into a seasonally adjusted monthly UCAP value using an appropriate class outage rate, (“Unit Net CONE Offer Floor”). The Offer Floor for a Mitigated Capacity Zone Installed Capacity Supplier that is a Special Case Resource shall mean a numerical value determined as specified in Section 23.4.5.7.5. The Offer Floor for Additional CRIS MW shall mean a numerical value determined as specified in Section 23.4.5.7.6. For the purposes of Section 23.4.5 of this Attachment H, “Non-Qualifying Entry Sponsors” shall mean a Transmission Owner, Public Power Entity, or any other entity with a Transmission District in the NYCA, or an agency or instrumentality of New York State or a political subdivision thereof.

  • Installed Capacity or 'IC’ means the summation of the name plate capacities of all the units of the generating station or the capacity of the generating station (reckoned at the generator terminals), approved by the Commission from time to time;

  • Potential electrical output capacity means, with regard to a unit, 33 per- cent of the maximum design heat input of the unit.

  • Generation Capacity Resource shall have the meaning specified in the Reliability Assurance Agreement.

  • Idle capacity means the unused capacity of partially used facilities. It is the difference between: (a) that which a facility could achieve under 100 percent operating time on a one-shift basis less operating interruptions resulting from time lost for repairs, setups, unsatisfactory materials, and other normal delays; and (b) the extent to which the facility was actually used to meet demands during the accounting period. A multi-shift basis should be used if it can be shown that this amount of usage would normally be expected for the type of facility involved.

  • Electrical Interconnection Facilities means the equipment and facilities required to safely and reliably interconnect a Facility to the transmission system of the Transmitting Utility, including the collection system between each Bloom System, transformers and all switching, metering, communications, control and safety equipment, including the facilities described in any applicable Interconnection Agreement.

  • Maximum Capacity or ‘Pmax’ means the maximum continuous active power which a power-generating module can produce, less any demand associated solely with facilitating the operation of that power-generating module and not fed into the network as specified in the connection agreement or as agreed between the relevant system operator and the power-generating facility owner;

  • Local Capacity Area has the meaning set forth in the CAISO Tariff.

  • Modular building manufacturer means a person or corporation who owns or operates a

  • Rated Capacity means the Average Daily Flow for which the Works are approved to handle;

  • Access Tandem Switch is a Switch used to connect End Office Switches to interexchange Carrier Switches. Qwest's Access Tandem Switches are also used to connect and switch traffic between and among Central Office Switches within the same LATA and may be used for the exchange of local traffic.

  • Design-build means a project delivery method in which the detailed design and subsequent construction is provided through a single contract with a Design-Build firm; a team, partnership, or legal entity that includes design professionals and a builder. The Design-Build Project delivery shall be implemented in accordance with Tex. Gov’t Code § 2166.2531.2

  • Riser means a watertight vertical cylinder and lid allowing access to an OWTS component for inspection, cleaning, maintenance, or sampling.

  • Storage Capacity means any combination of space, injectability and deliverability.

  • Generator Planned Outage means the scheduled removal from service, in whole or in part, of a generating unit for inspection, maintenance or repair with the approval of the Office of the Interconnection in accordance with the PJM Manuals.