Open trench definition

Open trench means a partially or totally excavated trench, including a trench in which a pipe, conduit or cable has been laid but not fully backfilled to the level of the adjoining ground and finally compacted.
View Source

Examples of Open trench in a sentence

  • If not, contact for locates Name Phone Utilities other than railroad located on railroad property Open trench across rails – agreement required – timing to remove/replace rails for sewer crossing, etc.

  • If not, contact for locates Name Phone Utilities other than railroad located on railroad property Open trench across rails - agreement required - timing to remove/replace rails for sewer crossing, etc.

  • Open trench lengths greater than 100 feet must be approved by the OWNER.

  • Install (1) 24’x36”x18” pull box off set by ±10’ from proposed riser pole #2833/353/2162 o Open trench and excavate ±10’ from pull box to proposed riser pole.

  • Open trench limitations and trench backfilling and/or plating requirements will also be enforced.

  • Install (1) 24’x36”x18” pull box off set by ±10’ from proposed riser pole #2833/354/7364 o Open trench and excavate ±10’ from pull box to proposed riser pole.

Related to Open trench

  • Sludge dryer means any enclosed thermal treatment device that is used to dehydrate sludge and that has a maximum total thermal input, excluding the heating value of the sludge itself, of 2,500 Btu/lb of sludge treated on a wet-weight basis.

  • Land treatment facility means a facility or part of a facility at which hazardous waste is applied onto or incorporated into the soil surface; such facilities are disposal facilities if the waste will remain after closure.

  • Open dump means a site on which any solid waste is placed, discharged, deposited, injected,

  • Open type traction battery means a type of battery requiring filling with liquid and generating hydrogen gas that is released to the atmosphere.

  • Electrostatic spray means a method of applying a spray coating in which opposite electric charges are applied to the substrate and the coating. The coating is attracted to the substrate by the electrostatic potential between them.