Permitted Number of Devices definition

Permitted Number of Devices means the maximum number of Devices associated to the License.

Examples of Permitted Number of Devices in a sentence

  • Mirrakoi hereby grants Licensee a non-assignable, non-exclusive, non-sublicensable, non-transferable, limited license to install and use the Software on a Permitted Number of Devices during the Term, provided Licensee complies with the restrictions set forth in Section 2.3 below.

  • The building insurance requirements have been provided within this RFP.

  • The XirusCAD Educational Lab License grants schools, universities and other educational institutions the right to install and use the Software for free for an unlimited period of time on the Permitted Number of Devices indicated on the License Certificate.

  • The XirusCAD Student License grants students the right to install and use the Software for free for a limited period of time (i.e., 6 months) as from activation on the Permitted Number of Devices indicated on the License Certificate.

  • The XirusCAD RE Commercial Perpetual License grants Licensee the right to install and use the Software for an unlimited period of time on the Permitted Number of Devices indicated on the License Certificate against payment of a specific fee.

  • The XirusCAD Commercial Perpetual License grants Licensee the right to install and use the Software for an unlimited period of time on the Permitted Number of Devices indicated on the License Certificate against payment of a specific fee.

  • The XirusCAD RE Commercial Subscription License grants Licensee the right to install and use the Software for a limited time period as from activation on the Permitted Number of Devices indicated on the License Certificate against payment of a specific fee.

  • The Rhino3DMedical NFR License grants Licensee the right to install and use the Software for free for an unlimited period of time on the Permitted Number of Devices indicated on the License Certificate.

  • You may install and use one copy of the Software on up to the Permitted Number of Devices to interact with Equipment at one Location as long as, when required by the Software, you present a valid serial number for each copy.

  • The XirusCAD Commercial Subscription License grants Licensee the right to install and use the Software for a limited time period as from activation on the Permitted Number of Devices indicated on the License Certificate against payment of a specific fee.

Related to Permitted Number of Devices

  • Permitted Number means one (1) unless otherwise indicated under a valid license (e.g. volume license) granted by Investintech or agreed to in writing by Investintech.

  • Total Floor Area means, the sum total of the total areas of all floors in a building or structure whether at above or below grade measured between the exterior faces of the exterior walls of the building or structure or from the centre line of a common wall separating two uses or from the outside edge of a floor where the outside edge of the floor does not meet an exterior or common wall, and;

  • Usable marijuana means the dried leaves and flowers of marijuana, and any mixture or preparation thereof, and does not include the seeds, stalks, and roots of the plant.

  • Specified Number means the number of Public Sources specified in the applicable Final Terms (or, if a number is not so specified, two).

  • Cubic foot of gas means the amount of gas required to fill a cubic foot of space when the gas is at an absolute pressure of fourteen and seventy-three hundredths (14.73) pounds per square inch at a temperature of sixty (60) degrees Fahrenheit.

  • Permitted Amount means, on any date, an amount equal to 3.5 times Adjusted EBITDA as of the most recent fiscal quarter for which financial statements of the Company are internally available immediately preceding such date.

  • Built-Up Area and/or “Covered Area” in relation to a Flat shall mean the floor area of that Flat including the area of balconies and terraces, if any attached thereto, and also the thickness of the walls (external or internal) and the columns and pillars therein Provided That if any wall, column or pillar be common between two Flats, then one-half of the area under such wall column or pillar shall be included in the built-up area of each such Flat.

  • Dilution Volatility Component means, at any time, the product (expressed as a percentage) of (i) the difference between (a) the highest three-month rolling average Dilution Ratio over the 12-month period then most recently ended and (b) the Adjusted Dilution Ratio, and (ii) a fraction, the numerator of which is equal to the amount calculated in (i)(a) of this definition and the denominator of which is equal to the amount calculated in (i)(b) of this definition.

  • Rentable Square Feet as used in the Lease will be deemed to include: (a) with respect to the Premises, the usable area of the Premises determined in accordance with the Method for Measuring Floor Area in Office Buildings, ANSI Z65.1-1996 (the "BOMA Standard"), plus a pro rata portion of the main lobby area on the ground floor and all elevator machine rooms, electrical and telephone equipment rooms and mail delivery facilities and other areas used by all tenants of the Building, if any, plus (i) for single tenancy floors, all the area covered by the elevator lobbies, corridors, special stairways, restrooms, mechanical rooms, electrical rooms and telephone closets on such floors, or (ii) for multiple tenancy floors, a pro-rata portion of all of the area covered by the elevator lobbies, corridors, special stairways, restrooms, mechanical rooms, electrical rooms and telephone closets on such floor; and (b) with respect to the Building, the total rentable area for all floors in the Building computed in accordance with the provisions of Subparagraph 1(a) above. In calculating the "Rentable Square Feet" of the Premises or the Building, the area contained within the exterior walls of the Building stairs, fire towers, vertical ducts, elevator shafts, flues, vents, stacks and major pipe shafts will be excluded.

  • Limited Index Ratio means (a) in respect of any month or date, as the case may be, prior to the relevant Issue Date, the Index Ratio for that month or date, as the case may be, (b) in respect of any Limited Indexation Date after the relevant Issue Date, the product of the Limited Indexation Factor for that month or date, as the case may be, and the Limited Index Ratio as previously calculated in respect of the month or date, as the case may be, twelve months prior thereto; and (c) in respect of any other month, the Limited Index Ratio as previously calculated in respect of the most recent Limited Indexation Month;

  • PJM Region Installed Reserve Margin means the percent installed reserve margin for the PJM Region required pursuant to RAA, Schedule 4.1, as approved by the PJM Board.

  • Maximum contaminant level means the maximum permissible level of a contaminant in water which is delivered to any user of a public water system.

  • Floor Area Ratio (FAR) means the quotient obtained by dividing the total covered area (plinth area) on all floors by the area of plot.

  • Conversion Value means, with respect to Convertible Capital Appreciation Bonds, the Accreted Value as of the Conversion Date.

  • Signaling Transfer Point (“STP”) means a signaling point that performs message routing functions and provides information for the routing of messages between signaling points within or between CCIS networks. A STP transmits, receives and processes CCIS messages.

  • Floor Area Ratio means the sum of the area of all floors of

  • Race or sex stereotyping means ascribing character traits, values, moral and ethical codes, privileges, status, or beliefs to a race or sex, or to an individual because of his or her race or sex.

  • Digital Signal Level 3 (DS-3 means the 44.736 Mbps third level signal in the time division multiplex hierarchy.

  • Additional Facilities has the meaning assigned to that term in Section 2.9(a).

  • Day-ahead Congestion Price means the Congestion Price resulting from the Day-ahead Energy Market.

  • Usable Area (as applicable) determined in accordance with the Standard Method For Measuring Floor Area in Office Buildings ANSI/BOMA Z65.1-1996 ("BOMA STANDARD"); provided, however, that for all purposes under this Lease the calculation of the Usable Area shall in no event include the area comprising the elevator lobbies, telephone rooms, electrical rooms, mechanical rooms, freight vestibule areas or restrooms. Landlord shall have the right, within ninety (90) days after the Commencement Date, to verify the Net Rentable Area and/or Usable Area of the Premises in accordance with the BOMA Standard (as modified pursuant to the immediately preceding sentence). Tenant shall have the right, at its sole cost and expense, within sixty (60) days after the Commencement Date, to have a qualified architect or space planner reasonably approved by Landlord verify the Net Rentable Area and/or Usable Area of the Premises and the Building in accordance with the BOMA Standard (as modified pursuant to the immediately preceding sentence); provided, however, that such determination shall be subject to the reasonable review and approval of Landlord and its designated consultants, surveyors, or engineers. If, as a result of such verification (and approval by Landlord), it is determined that the Net Rentable Area and/or Usable Area of the Premises are different than the amounts set forth in Section 1.1 above, all corresponding amounts set forth this Lease (including, without limitation, Tenant's Share, the amount of monthly Base Rent, the amount of the Security Deposit and the Allowance) shall be retroactively adjusted and appropriate payments, if applicable, shall be made by Landlord to Tenant or Tenant to Landlord (as applicable) within ten (10) days after such determination and approval by Landlord. Both parties agree to execute a commercially reasonable instrument in order to document such revised amounts. From time to time throughout the Term of this Lease, Landlord shall have the right, at its sole cost and expense, to verify the Net Rentable Area and/or Usable Area of the Premises, the Building and the Project in accordance with the BOMA Standard and this subparagraph (f) (pertaining to adjustment of certain Lease provisions and appropriate payments (if applicable)).

  • Building level or district level leader means an individual employed by the District whose job assignment is that of a building level or district level administrator or an equivalent role, including an administrator licensed by the State Board of Education, an unlicensed administrator, or an individual on an Administrator Licensure Completion Plan. Building level or district level leader does not include the superintendent, deputy superintendents, associate superintendents, and assistant superintendents.

  • explosive actuated fastening device means a tool that is activated by an explosive charge and that is used for driving bolts, nails and similar objects for the purpose of providing fixing;

  • Permitted Dividend has the meaning provided in Section 6.1(d).

  • Residential Floor Area means all of the square footage of living area within the perimeter of a residential structure, not including any carport, walkway, garage, overhang, patio, enclosed patio, or similar area. The determination of Residential Floor Area shall be made by reference to the building permit(s) issued for such Assessor’s Parcel.

  • Maximum contaminant level goal or “MCLG” means the maximum level of a contaminant in drinking water at which no known or anticipated adverse effect on the health of persons would occur, and which allows an adequate margin of safety. MCLGs are nonenforceable health goals.