Physical Tests definition

Physical Tests means the following physical actions undertaken by the consultant: opening and shutting of doors, windows and draws; operation of taps; water testing of shower recesses; and the tapping of tiles and wall plaster.
Physical Tests means the following physical actions undertaken by the consultant: opening and shutting of doors, windows and draws; operation of taps; water testing of shower recesses; and the tapping of tiles and wall plaster. Purpose, Scope and Acceptance Criteria The Property Report (“the Report”) is to be carried out by a Building Consultant (“the Consultant”). PURPOSE OF INSPECTION The purpose of the inspection is to provide advice to the Client regarding the condition of the Building & Site at the time of inspection. SCOPE OF INSPECTION The Report only covers or deals with any evidence of: Structural Damage; Conditions Conducive to Structural Damage; any Major Defect in the condition of Secondary Elements and Finishing Elements; collective (but not individual) Minor Defects; and any Serious Safety Hazard discernible at the time of inspection. The inspection is limited to the Readily Accessible Areas of the Building & Site (see Note below) and is based on a visual examination of surface work (excluding furniture and stored items), and the carrying out of Tests.
Physical Tests means the following physical actions undertaken by the consultant: opening and shutting of doors, windows and draws; operation of taps; water testing of shower recesses; and the tapping of tiles and wall plaster. SPECIAL CONDITIONS The Timber Pest Detection Consultant and/or SCBPR reserves the right to reject any request for inspection at the consultant’s absolute discretion. In this event, any fees, deposit or other monies paid by the client will be refunded. The Timber Pest Detection Consultant and/or SCBPR shall not be liable for failure to perform any duty or obligation that the consultant may have under this agreement, where such failure has been caused by inclement weather, industrial disturbance, inevitable accident, inability to obtain labour or transportation, or any cause outside the reasonable control of the consultant.

Examples of Physical Tests in a sentence

  • Pharmacists should keep in mind that the preparation instructions below are considered medium risk per USP 38 General Chapter Physical Tests / <797> Pharmaceutical Compounding - Sterile, and should follow the requirements of their country, their institution, and their pharmacy regulatory authority regarding these procedures.

  • Instrument testing using electronic moisture detecting meter of those areas and other visible accessible elements of construction showing evidence of dampness was performed.b. Physical Tests - the following physical actions undertaken by the consultant: opening and shutting of doors, windows and drawers; operation of taps; water testing of shower recesses; and the tapping of tiles and wall plaster.

  • Bell centered (visual) — one every two hours, each line2.0 Testing Requirements 2.1 Physical Tests and Frequencies A.

  • Officers deemed unfit for duty due to intoxication shall be tested in accordance with the provisions of 5:2.2. 4:2.2 Physical Tests for Drugs and Alcohol All physical tests for drugs and alcohol will be conducted in accordance with the provisions of the policies of the New Jersey Attorney General, the Camden County Prosecutor, and the Office of the Sheriff.

  • J Am Chem Soc 60: 309–319.2. USP 34 / NF 29 Specific Surface Area / Physical Tests.

  • M.W., Calibration of DEM models for Granular Materials Using Bulk Physical Tests, PhD Thesis, University of Edinburgh, 2010.

  • Negative differential swell test, crumb test, double hydrometer test, and pinAssessment of Dispersion Characteristics of Red Mud Waste from the Physical Tests hole test are commonly employed tests to assess the dispersive behavior of a material (Volk 1937; Sherard et al.

  • Examples of specialErrata to First Supplement to USP 40–NF 35 Physical Tests / á800ñ Hazardous Drugs 9 exposure-reducing strategies include small-bore connectors (such as Luer Lock) and syringes, syringe caps, CSTDs, the capping of container ports, sealed impervious plastic bags, impact-resistant and/or water-tight containers, and cautionary labeling.

  • Parts of the high mast tower work will also be inspected by the Physical Tests Section of the Materials and Research Division.Members of the Physical Tests Section will visit the project site to observe the Contractor's methodology of anchor bolt installation and anchor bolt tensioning and will randomly test nuts on the tower for proper tightness.

  • Chemical and Physical Tests provide information on the total concentration of specific chemical compounds in the ecosystem and information on pH, temperature, moisture, and other measures.


More Definitions of Physical Tests

Physical Tests means the following physical actions:
Physical Tests means the following physical actions undertaken by the consultant: opening and shutting of doors, windows and draws; operation of taps; water testing of shower recesses; and the tapping of tiles and wall plaster. Terms on which this report was prepared Service‌ As requested by the Client, the inspection carried out by the Building Consultant (“the Consultant”) was a “Pre-Purchase Standard Property Report”. Purpose of inspection‌ The purpose of this inspection is to provide advice to the Client regarding the condition of the Building & Site at the time of inspection. Scope of inspection‌ This Report only covers or deals with any evidence of Structural Damage; Conditions Conducive to Structural Damage; any Major Defect in the condition of Secondary Elements and Finishing Elements; collective (but not individual) Minor Defects; and any Serious Safety Hazard discernible at the time of inspection. The inspection is limited to the Readily Accessible Areas of the Building & Site and is based on a visual examination of surface work (excluding furniture and stored items), and the carrying out of Tests. Acceptance criteria‌ The building was compared with a building that was constructed per the generally accepted practice at the time of construction and which has been maintained such that there has been no significant loss of strength and serviceability.Unless noted in “Special Conditions or Instructions”, the Report assumes that the existing use of the building will continue.This Report only records the observations and conclusions of the Consultant about the readily observable state of the property at the time of inspection. The Report therefore cannot deal with:(a) possible concealment of defects, including but not limited to, defects concealed by lack of accessibility, obstructions such as furniture, wall linings and floor coverings, or by applied finishes such as to render and paint; and(b) undetectable or latent defects, including but not limited to, defects that may not be apparent at the time of inspection due to seasonal changes, recent or prevailing weather conditions, and whether or not services have been used sometime before the inspection being carried out.These matters outlined above in (a) & (b) are excluded from consideration in this Report.If the Client has any doubt about the purpose, scope and acceptance criteria on which the Report was based please discuss your concerns with the Consultant on receipt of the Report.The Client acknowledges that, unl...

Related to Physical Tests

  • Physical therapy aide means a person who has

  • Physical therapy means services provided by a qualified physical therapist.

  • Physical abuse means any physical injury, mental injury, or threatened injury, inflicted by a person responsible for the child’s care other than by accidental means; or any physical or mental injury that cannot reasonably be explained by the child’s history of injuries or any aversive or deprivation procedures, or regulated interventions, that have not been authorized by Minn. Stat. § 125A.0942 or § 245.825.

  • Physical therapist means an individual who is licensed by a state to practice physical therapy.

  • Commissioning Tests means all of the procedures and tests which, in accordance with the Reasonable and Prudent Standard, and in compliance with industry guidelines, practices and standards, are:

  • Physical Escort means the temporary touching or holding the hand, wrist, arm, shoulder, or back of a student who is acting out for the purpose of inducing the student to walk to a safe location.

  • Physical examination means the assessment of an individual’s health by a professional licensed to practice medicine or osteopathy, or by an advanced practice nurse or physician assistant.

  • Acceptance Tests means those tests performed during the Performance Period which are intended to determine compliance of Equipment and Software with the specifications and all other Attachments incorporated herein by reference and to determine the reliability of the Equipment.

  • Tests means and include such test or tests to be carried out on the part of the contractor as are prescribed in the contract or considered necessary by BHEL, in order to ascertain the quality, workmanship, performance and efficiency of the contractor or part thereof.

  • Testing means that element of inspection that determines the properties or elements, including functional operation of materials, equipment, or their components, by the application of established scientific principles and procedures.

  • Physical presence means a place of business that is maintained by a Foreign Bank and is located at a fixed address, other than solely a post office box or an electronic address, in a country in which the Foreign Bank is authorized to conduct banking activities, at which location the Foreign Bank (i) employs one or more individuals on a full-time basis, (ii) maintains operating records related to its banking activities, and (iii) is subject to inspection by the banking authority that licensed the Foreign Bank to conduct banking activities.

  • Commissioning test means tests applied to a distributed generation facility by the applicant after construction is completed to verify that the facility does not create adverse system impacts and performs to the submitted specifications. At a minimum, the scope of the commissioning tests performed shall include the commissioning test specified in Institute of Electrical and Electronics Engineers, Inc. (IEEE) Standard 1547 Section 5.4 "Commissioning tests".

  • Test means such test as is prescribed by the particulars or considered necessary by the Inspecting Officer whether performed or made by the Inspecting Officer or any agency acting under the direction of the Inspecting Officer;

  • Penetration Testing means security testing in which assessors mimic real-world attacks to identify methods for circumventing the security features of an application, system, or network. (NIST SP 800-115)

  • Physical Safeguards are physical measures, policies, and procedures to protect CONTRACTOR’s electronic information systems and related buildings and equipment, from natural and environmental hazards, and unauthorized intrusion.

  • Physical Conditions Report means, with respect to the Property, a report prepared by a company satisfactory to Lender regarding the physical condition of the Property, satisfactory in form and substance to Lender in its sole discretion, which report shall, among other things, (a) confirm that the Property and its use complies, in all material respects, with all applicable Legal Requirements (including, without limitation, zoning, subdivision and building laws) and (b) include a copy of a final certificate of occupancy with respect to all Improvements on the Property.

  • Physical dependence means a state of adaptation that is manifested by a drug-specific withdrawal syndrome that can be produced by abrupt cessation, rapid dose reduction, decreasing blood level of the drug, administration of an antagonist, or a combination of these.

  • Acceptance Testing mean the tests, reviews and other activities that are performed by or on behalf of Agency to determine whether the Deliverables meet the Acceptance Criteria or otherwise satisfy the Agency, as determined by the Agency in its sole discretion.

  • Independent testing laboratory means an independent organization, accepted by the Contracting Officer, engaged to perform specific inspections or tests of the work, either at the site or elsewhere, and report the results of these inspections or tests.

  • Subsurface Borings and Testing means borings, probings and subsurface explorations, laboratory tests and inspections of samples, materials and equipment; appropriate professional interpretations of all the foregoing.

  • Performance Tests means the tests to be conducted on the equipment at site for checking the performance parameters of the equipment as defined in Technical Specification.

  • Physical Property has the meaning assigned to such term in the definition of “Delivery” above.

  • Structural component means a component that supports non-variable forces or weights (dead loads) and variable forces or weights (live loads).

  • Physical hazard means a chemical for which there is scientifically valid evidence that it is a combustible liquid, a compressed gas, explosive, flammable, an organic peroxide, an oxidizer, pyrophoric, unstable (reactive) or water-reactive.

  • Percolation test means a subsurface soil test at the depth of a proposed absorption system or similar component of an OWTS to determine the water absorption capability of the soil, the results of which are normally expressed as the rate at which one inch of water is absorbed. The rate is expressed in minutes per inch.

  • Critical Test Concentration or "(CTC)" means the specified effluent dilution at which the Permittee is to conduct a single-concentration Aquatic Toxicity Test.