Pipe work definition

Pipe work means pipes, conduits, hoses, tubing, cables and wires;
View Source
Pipe work. This term embraces metal pipe, fittings, valves, appurtenances, and coverings therefore, also metal pipe hangers and supports, but does not include sanitary toilet facilities.
View Source

Examples of Pipe work in a sentence

  • TS-774 Pipe work materials shall be as stated in the Particular Conditions or on the Drawings.

  • Such agreements must be in writing and may only be concluded with a shop ▇▇▇▇▇▇▇ who has been elected within the scope of the Collective Agreement for Sheet Metal, Plumbing and Pipe work or, if a shop ▇▇▇▇▇▇▇ has not been elected, with the local branch of the union.

  • Pipe work shall be adequately supported depending upon the size and class to prevent pipe sag.

  • TS-288 Pipe work materials shall be as stated in the Particular Conditions or on the Drawings.

  • This will include but not be limited to: • Volume control dampers, pipeline valves, motorized valves • Pipe work, strainers, ductwork • Remote controls and controllers associated with plant and equipment • Controls and controller’s integral with plant and equipment, including entire BMS systems and components.

  • All kitchen surfaces are to be thoroughly washed down, degreased and all stickers and marks removed, including: Worktops; Units (inside and out); Drawers; Plinths; Kick boards; Build in cupboards (inside and out); Tiling; Cooker hoods; Boiler cases (old labels are to be removed); Pipe work (both visible and inside cupboards); Sink and taps (chemical clean).

  • BS 4278:1984 Specification for eye bolts for lifting purposes BSEN 806-4:2010 Specification for Design, Installation, Testing and Maintenance of Services supplying Water for Domestic use within buildings BSEN 12056-2:2000 Code of Practice for Sanitary Pipe work Installations The Water Supply Byelaws IEE Wiring Regulations 17th Edition All timber and wood-derived products must be from independently verifiable legal and sustainable sources.

  • Pipe work and fittings shall comply with appropriate local requirements and be complying of the local (PER) and SANS 347, Installer of the equipment shall provide the relevant design code used to conform to the requirement.

  • Pipe work is to be connected to the sump within Cell 2 as per the construction drawings.

  • Pipe work or radiators, in areas where people could become trapped, which could become hotter than 43°C need to be guarded or limited to 43°C using a thermostatic radiator valve.

Related to Pipe work

  • piece-work means any work the pay for which is estimated by the amount of work performed irrespective of the time occupied in its performance;

  • drainage work means any watercourse and includes any land which provides or is expected to provide flood storage capacity for any watercourse and any bank, wall, embankment or other structure, or any appliance, constructed or used for land drainage, flood defence or tidal monitoring;

  • Project Work means the work required to complete the Project.