PM Standards definition

PM Standards means and refer to the activities of preventative maintenance that Landlord performs with regard to the equipment that serves the Premises. Landlord’s current list of PM Standards is available on the Internet at the following URL: “POP Room” shall mean and refer to the POP Room described in Item 16 of the Basic Lease Information.
Sample 1Sample 2Sample 3
PM Standards means and refer to the activities of preventative maintenance that Landlord performs with regard to the equipment that serves the Premises. Landlord’s current list of PM Standards is available on the Internet at the following URL:
Sample 1Sample 2
PM Standards means and refer to the activities of preventative maintenance that Landlord performs with regard to the equipment that serves the Premises which will be performed in accordance with original equipment manufacturers’ recommendations and industry standard practices.
Sample 1Sample 2

Examples of PM Standards in a sentence

  • Tenant acknowledges that Landlord’s PM Standards shall be updated on at least an annual basis.

  • These include: • Measures to Implement Ozone and Particulate Matter (PM) Standards: EPA Base Case 2004 predates and so does not include the provisions of CAIR, the primary federal regulatory measure for achieving the National Ambient Air Quality Standards (NAAQS) for ozone (8-hour standard of 0.08 ppm) and fine particles (24-hour average of 65 ug/m3 or less and annual mean of 15 ug/m3 for particles of diameter 2.5 micrometers or less, i.e., PM2.5).

  • So there is some personal opinion and best judgement allowed We want to include CARB PM Standards and Testing Requirements included in the regulation.

  • The California Air Resources Board (CARB) is responsible for developing a plan for meeting State PM Standards.

  • It is more protective of human health than the corresponding national standard.Additional California and federal standards were established for PM2.5 to further protect public health (Table II-1).Table II-1: State and National PM Standards California StandardNational Standard Particulate matter levels in most areas of California exceed one or more of current State PM standards.

  • CO and PM Standards EPA will propose combined standards for nonmethane hydrocarbons (NMHC) and NOX, and separate standards for carbon monoxide (CO) and PM.

  • If new PM Standards and/or Templates are require, create as applicable.

  • Public Policy: Clean Air—Economic…ed U.S. EPA Ozone and PM Standards This article discussed the U.S. Environmental Protection Agency’s efforts to tighten the reins on air quality standards and the restriction of federal highway funding if states are found to be non compliant with these stringent standards.

  • The sub-hypotheses create are: Sub-hypothesis for Category 1: H1a: Developing and Maintaining PM Standards and Methods has a positive impact on Project Efficiency.

  • Rationale for Decision on the Secondary PM, subscripts are used to denote welfare effects is consistent with the last PM Standards particle size.

Related to PM Standards

  • Minimum Standards means standards of practice that interpret the legal definition of nursing as well as provide criteria against which violations of the law can be determined.

  • Quality Standards means the quality standards published by BSI British Standards, the National Standards Body of the United Kingdom, the International Organisation for Standardisation or other reputable or equivalent body, (and their successor bodies) that a skilled and experienced operator in the same type of industry or business sector as the Contractor would reasonably and ordinarily be expected to comply with, and as may be further detailed in the Specification.

  • Safety Standards means all laws, union rules and trade or industry custom or codes of any kind whatsoever, in effect from the date of this Agreement through Final Acceptance of the construction work, pertaining to worker safety and accident prevention applicable to the Project and/or the construction work (including, but not limited to, rules, regulations and standards adopted pursuant to the Occupational Safety and Health Act of 1970, as amended from time to time).

  • Technical Standards means the technical standards set out in paragraph 2.4 of the Order Form;

  • NERC Reliability Standards means the most recent version of those reliability standards applicable to the Generating Facility, or to the Generator Owner or the Generator Operator with respect to the Generating Facility, that are adopted by the NERC and approved by the applicable regulatory authorities, which are available at xxxx://xxx.xxxx.xxx/files/Reliability_Standards_Complete_Set.pdf, or any successor thereto.

  • Reliability Standards means the criteria, standards, rules and requirements relating to reliability established by a Standards Authority.

  • Design Standards means the standards developed as a requirement of the Programmatic Agreement

  • State minimum standards means minimum requirements

  • Applicable Standards means the requirements and guidelines of NERC, the Applicable Regional Entity, and the Control Area in which the Customer Facility is electrically located; the PJM Manuals; and Applicable Technical Requirements and Standards.

  • Accessibility Standards means accessibility standards and specifications for Texas agency and institution of higher education websites and EIR set forth in 1 TAC Chapter 206 and/or Chapter 213.

  • Service Level Standards has the meaning ascribed thereto in Section 2.1 hereof.

  • Codes and Standards means all the applicable codes and standards as indicated in the Technical Specification.

  • Uniform standard means a standard adopted by the commission for a product line, pursuant to article VII of this compact, and shall include all of the product requirements in aggregate; provided, that each uniform standard shall be construed, whether express or implied, to prohibit the use of any inconsistent, misleading, or ambiguous provisions in a product and the form of the product made available to the public shall not be unfair, inequitable, or against public policy as determined by the commission.

  • National Standards means the document entitled “National Standards for the Volatile Organic Compound Content of Canadian Commercial/Industrial Surface Coating Products Automotive Refinishing, October 1998, PN 1288" and published by the Canadian Council of Ministers of the Environment;

  • Standards means the British or international standards, Authority's internal policies and procedures, Government codes of practice and guidance referred to in Framework Schedule 13 (Standards) together with any other specified policies or procedures identified in Framework Schedule 13 (Standards);

  • auditing standards means auditing standards as defined in National Instrument 52-107 Acceptable Accounting Principles and Auditing Standards;

  • Privacy Standards means the standards of the privacy of individually identifiable health information, as pursuant to HIPAA.

  • Water quality standards means provisions of state or federal law which consist of a designated use or uses for the waters of the Commonwealth and water quality criteria for such waters based upon such uses. Water quality standards are to protect the public health or welfare, enhance the quality of water and serve the purposes of the State Water Control Law (§ 62.1-44.2 et seq. of the Code of Virginia) and the federal Clean Water Act (33 USC § 1251 et seq.).

  • Environmental and Social Standards or “ESSs” means, collectively: (i) “Environmental and Social Standard 1: Assessment and Management of Environmental and Social Risks and Impacts”; (ii) “Environmental and Social Standard 2: Labor and Working Conditions”; (iii) “Environmental and Social Standard 3: Resource Efficiency and Pollution Prevention and Management”;

  • Environmental Standards means regulations or certification specifications governing the certification of designs with regard to noise characteristics and exhaust emissions of civil aeronautical products and appliances.

  • Security Standards means the final rule implementing HIPAA’s Security Standards for the Protection of Electronic PHI, as amended.

  • Specifications and Standards means the specifications and standards relating to the quality, quantity, capacity and other requirements for the Project Highway, as set forth in Schedule-D, and any modifications thereof, or additions thereto, as included in the design and engineering for the Project Highway submitted by the Contractor to, and expressly approved by, the Authority;

  • Pretreatment standards means all applicable Federal rules and regulations implementing Section 307 of the Act, as well as any nonconflicting State or local standards. In cases of conflicting standards or regulations, the more stringent thereof shall be applied.

  • Applicable water quality standards means all water quality standards to which a discharge is subject under the federal Clean Water Act and which has been (a) approved or permitted to remain in effect by the Administrator following submission to the Administrator pursuant to Section 303(a) of the Act, or (b) promulgated by the Director pursuant to Section 303(b) or 303(c) of the Act, and standards promulgated under (APCEC) Regulation No. 2, as amended.

  • Standards Board means the Professional Standards Board established pursuant to 14 Del.C. §1201.

  • Technical standard means a document that specifies design, predicted performance and operation and maintenance specifications for a material, device or method.