Port Requirements definition

Port Requirements means any notice or notices or other directions or notice issued by the Port Operator or any other notices, directions or regulations issued by the Harbour Master or any Governmental Authority having jurisdiction over the Port or the Port Facilities.
Sample 1Sample 2Sample 3
Port Requirements means the requirements of the Port Authority;
Sample 1Sample 2Sample 3
Port Requirements means any requirements established by the Port for the use of Port Areas, including but not limited to requirements included in port instructions regulations, guidelines or any similar rules or instructions in force at a given time.
Sample 1Sample 2Sample 3

Examples of Port Requirements in a sentence

  • You can use cockpit.sh --info ports to list ports currently in use (by any application or server).Table 2: Network Port Requirements for SAP ASE CockpitPort NameDefault Port NumberRequired?DescriptionRMI4992YesServer port used for RMI protocol access.HTTP4282YesServer port used for HTTP Web access to the server.

  • Analog Telephone Port Requirements for Packet-based Terminal Adapters (ANSI/TIA-1063 when published) Current Status: The half day TR41.1.1 meeting was not able to review all the contributions.

  • If the assembly must be installed inside of the building a floor drain must be provided and sized in accordance with the Drain Port Requirements Table or the recommended manufactures specifications.

  • Cloud RealmEdge RealmNodesNodesKubeEdgeK8s ClusterCloudCoreEdgeMeshEdgeCoreManagementOpenFaaS Gatewayfaas-netesOpenFaaSFaaS Workloads Figure 4.1.: Overall Architecture.4.2. Infrastructure Setup Table 4.1.: Hardware specifications.VM Name & Alias VM flavorvCPUcountRAM Disk OSsize Cloud Node 1(Main)lrz.large418 GB Table 4.2.: Port Requirements for inter-node communication.

  • Pre-Design focuses on gathering information prior to designing to apprise the tenant and their design team about Port Requirements and existing conditions.

  • Will contact TIA on this.Target Completion Date: Published April 2006• PN-3-0191, Analog Telephone Port Requirements for Packet-Based Terminal Adapters (to be published as ANSI/TIA-1063)Current Status: Ballot comments have been resolved; document will be re-balloted.

  • System Requirements To use the CCT+, your computer must meet the following minimum requirements:■ Windows XP / Vista / Windows 7■ Pentium II 233 MHz■ 128 MB RAM■ 32 MB free disk space Frame Grabber Serial Port Requirements The CCT+ software resides in your host PC and communicates with the camera via a serial interface that will be a Camera Link serial port or a Windows Com port.

  • General Port Requirements – Marine Perspective Deadmen/Bollards –Ideally 3 deadmen although 2 may be acceptable depending on location, current flow, etc., sufficient mooring/anchorages to securely tie off the vessel. River cruise vessels have bow stages (gangways) like those the steamboats of years past.

  • Steve Whitesell is the editor.Target Completion Date: 02/2013 ANSI/TIA-PN-1063-A, Analog Telephone Port Requirements for Packet-based User Premises Terminal Equipment (to become ANSI/TIA-1063-A)Current Status: An action item is pending to open this project.

  • In each case, the intent of the assessments was not to produce a definitive conclusion but, to provide an output that would either support or challenge the potential for OSW staging activities at Sheet Harbor.7.1. Port Requirements for OSW StagingOne of the ambitions of the offshore wind industry has always been, and continues to be, to minimize the effective cost of the power generated.


More Definitions of Port Requirements

Port Requirements means the requirements of the Loading Port to apply to all collections effected under this Agreement, as attached at Schedule 4; Price means the price of Biomass, as specified in section 9, delivered on FOB terms in accordance with this Agreement;
Sample 1
Port Requirements means the requirements of the Port of Quebec; “Shipments” means each shipment of Product to be delivered to RTK’s customer at the Loading Port as specified in the relevant Delivery Schedule;
Sample 1

Related to Port Requirements

  • Relevant Requirements means all applicable Law relating to bribery, corruption and fraud, including the Bribery Act 2010 and any guidance issued by the Secretary of State for Justice pursuant to section 9 of the Bribery Act 2010;

  • Project Requirements means the statement included in the Request for Proposal detailing the technical and other requirements of Canada which are to be met by the successful Bidder, and which are to be addressed in the Bid;

  • OHS Requirements means all Laws applicable to the Supply and related to occupational health or safety, and all of the City Policies that relate to occupational health or safety, and includes without limitation the WCA;

  • Pretreatment requirements means any substantive or procedural requirement related to pretreatment, other than a pretreatment standard, imposed on an industrial user.

  • Minimum Requirements means the minimum requirements for available commercial structures. The minimum requirements may be found at this link: https://portlandgeneral.com/energy- choices/renewable-power/green-future-impact The minimum requirements may be updated from time to time to reflect PGE’s criteria from its latest Commission accepted renewable request for proposals.

  • Program Requirements means certain minimum program entry requirements as well as ongoing program requirements, to be fulfilled by Partner, some of which are general PartnerEdge requirements, some of which are specific for the “Sell Engagement” and some of which are specific for the different “Cloud” Product Families, including, without limitation payment of the Program Fee(s), meeting certain minimum annual revenue requirements, upholding a Sell Authorization for at least one “Cloud” Product Family and other requirements as set out in detail in the PartnerEdge Program Guide and the RSPI.

  • End Client Requirements means the specific requirements of the End Client, as notified to the Supplier in writing;

  • Design requirements means the written description of the infrastructure facility to be procured pursuant to this article, including:

  • Maintenance Requirements shall have the meaning set forth in Clause 14.2;

  • MREL Requirements means the laws, regulations, requirements, guidelines, rules, standards and policies relating to minimum requirements for own funds and eligible liabilities applicable to the Issuer and/or the Group, from time to time, (including any applicable transitional or grandfathering provisions), including, without limitation to the generality of the foregoing, any delegated or implementing acts (such as regulatory technical standards) adopted by the European Commission and any regulations, requirements, guidelines, rules, standards and policies relating to minimum requirements for own funds and eligible liabilities adopted by the Federal Republic of Germany or the Republic of Italy, a relevant resolution authority or the European Banking Authority from time to time (whether or not such requirements, guidelines or policies are applied generally or specifically to the Issuer and/or the Group), as any of the preceding laws, regulations, requirements, guidelines, rules, standards, policies or interpretations may be amended, supplemented, superseded or replaced from time to time.

  • Service Requirements means the specification that the Flexibility Services must be capable of meeting, as defined in Schedule 1;

  • Minimum Balance Requirements The minimum balance to open the account is $5.00. If the balance falls below $5 at any time, the account may be closed. See Balance Computation Method above. Fees and Charges; Other Requirements: See our Schedule of Fees at xxxxxxx.xxx/xxxx. Dividends: See Disclosures Concerning Dividends above. Current rates are disclosed on the Credit Union’s website.

  • Applicable Technical Requirements and Standards means those certain technical requirements and standards applicable to interconnections of generation and/or transmission facilities with the facilities of an Interconnected Transmission Owner or, as the case may be and to the extent applicable, of an Electric Distributor, as published by Transmission Provider in a PJM Manual provided, however, that, with respect to any generation facilities with maximum generating capacity of 2 MW or less (synchronous) or 5 MW or less (inverter-based) for which the Interconnection Customer executes a Construction Service Agreement or Interconnection Service Agreement on or after March 19, 2005, “Applicable Technical Requirements and Standards” shall refer to the “PJM Small Generator Interconnection Applicable Technical Requirements and Standards.” All Applicable Technical Requirements and Standards shall be publicly available through postings on Transmission Provider’s internet website.

  • Listing Requirements means the Main Market Listing Requirements of Bursa Securities.

  • Reporting Requirements As defined in Section 11.15.

  • Insurance Requirements means, collectively, all provisions of the Insurance Policies, all requirements of the issuer of any of the Insurance Policies and all orders, rules, regulations and any other requirements of the National Board of Fire Underwriters (or any other body exercising similar functions) binding upon each Loan Party which is an owner of Mortgaged Property and applicable to the Mortgaged Property or any use or condition thereof.

  • Payment Requirement means the amount specified as being applicable to the Reference Entity in the Standard or its equivalent in the relevant Obligation Currency (or, if no such amount is specified, USD 1,000,000 or its equivalent in the relevant Obligation Currency) in either case as of the occurrence of the relevant Failure to Pay or Potential Failure to Pay, as applicable.

  • Operational requirements means the need to ensure that the Agency is to be operated as effectively, efficiently and economically as possible.

  • Performance Requirements The ordering entity reserves the right to inspect and verify that all deliveries are in accordance with specifications, both at the point of delivery and at the point of use. For orders that specify an “authorized party” to receive and inspect deliveries and/or installations, acceptance and inspection procedures must be performed by the” authorized party” to be considered and accepted by the ordering entity. Products inspected at the time of use are subject to refusal and return requirements for issues of quality such as defects in manufacturing and/or workmanship. Products will not be considered accepted by the ordering entity until the installation is complete for the applicable products.

  • Default Requirement means the amount specified as being applicable to the Reference Entity in the Standard, or its equivalent in the relevant Obligation Currency (or, if no such amount is specified, U.S.$ 10,000,000 or its equivalent in the relevant Obligation Currency) in either case, as of the occurrence of the relevant Credit Event.

  • Safety Requirements means Prudent Electrical Practices, CPUC General Order No. 167, Contractor Safety Program Requirements, and all applicable requirements of Law, PG&E, the Utility Distribution Company, the Transmission Provider, Governmental Approvals, the CAISO, CARB, NERC and WECC.

  • Technical Requirements means the Technical Requirements in Section VII of the tendering documents.

  • Credit Requirements means a long-term credit rating (corporate or long-term senior unsecured debt) of (1) “Baa3” or greater by Xxxxx’x, or (2) “BBB-” or greater by S&P, or such other indicia of creditworthiness acceptable to PacifiCorp in its reasonable judgment.

  • REIT Requirements has the meaning set forth in Section 5.2.

  • JSE Listings Requirements means the Listings Requirements of the JSE applicable from time to time;

  • Monitoring and reporting requirements means one or more of