Precautionary Sample definition

Precautionary Sample is defined in Section 9.2(a) below.

Examples of Precautionary Sample in a sentence

  • The Precautionary Sample shall be drawn after the arrival of the vessel in Hawaii state waters, but prior to the commencement of the Marine Delivery, and shall be tested by Refinery’s laboratory.

  • In the event of an unresolvable difference between Seller and Hawaiian Electric, the sealed part of the Precautionary Sample in the possession of the Independent Inspector shall be provided to an independent testing laboratory for an official determination, which shall be final and binding upon both Parties.

  • Seller agrees to provide HECO and the Independent Inspector with the results of its determinations (a Certificate of Quality) representing the quality of the Precautionary Sample no later than seventy two (72) hours after the completion of the loading of Seller’s Transport Container(s).

  • Attachment C lists the testing to be performed on Precautionary Sample.

  • Chevron agrees to provide HECO and the Independent Inspector with the results of its determinations representing the quality of the Precautionary Sample.

  • The Precautionary Sample shall be drawn under the supervision of the Independent Inspector from Seller’s vessel’s tanks at the completion of loading in such a manner as to be representative of the relevant cargo after the arrival of the vessel at the designated Oahu Harbor, but prior to commencement of the cargo at the Discharge Pier.

  • Seller agrees to provide Hawaiian Electric and the Independent Inspector with the results of its determinations representing the quality of the Precautionary Sample no later than seventy-two (72) hours after the completion of the loading of Seller’s vessel.

  • Seller agrees that should a pre-discharge computer blend simulation representing the quality of a volumetric weighted average mixture of the Precautionary Sample, components of the Marine Delivery in questions previously shipped to Hawaiian Electric’s receiving tanks and other Fuel, Fuel blendstock or components available to be shipped from the Refinery reasonably indicate the Marine Delivery in question will not conform to the quality specified in Exhibit A.

  • In the event of an unresolvable difference between Seller and the Companies, the sealed part of the Precautionary Sample in the possession of the Independent Inspector shall be provided to an independent testing laboratory for an official determination, which shall be final and binding upon both Parties.

  • The Precautionary Sample shall be drawn under the supervision of the Independent Inspector from Seller’s tanks in such a manner as to be representative of the relevant cargo after the arrival at HECO’s Facility, but prior to commencement of loading the Transport Container or tanker truck.

Related to Precautionary Sample

  • Grab sample means an individual sample collected in less than 15 minutes in conjunction with an instantaneous flow measurement.

  • DNA sample means any material that has come from a human body and consists of or includes human cells;

  • Yearly (1/Year) sampling frequency means the sampling shall be done in the month of September, unless specifically identified otherwise in the effluent limitations and monitoring requirements table.

  • Yearly (1/Year) sampling frequency means the sampling shall be done in the month of September, unless specifically identified otherwise in the effluent limitations and monitoring requirements table.

  • Disinfection profile means a summary of daily Giardia lamblia inactivation through the treatment plant. The procedure for developing a disinfection profile is contained in s. NR 810.34.

  • Dielectric material means a material that does not conduct direct electrical current. Dielectric coatings are used to electrically isolate UST systems from the surrounding soils. Dielectric bushings are used to electrically isolate portions of the UST system (e.g., tank from piping).

  • Indicator means a quantitative or qualitative factor or variable that contributes to better understanding progress in implementing;

  • Recalibration means the adjustment of all DRG weights to reflect changes in relative resource consumption.

  • Biological Samples means any physical samples obtained from Study Participants in accordance with the Protocol for the purposes of the Study.

  • frequency ride through as used herein shall mean the ability of a Small Generating Facility to stay connected to and synchronized with the system or equipment of the Transmission Owner and any Affected Systems during system disturbances within a range of under-frequency and over- frequency conditions, in accordance with Good Utility Practice and consistent with any standards and guidelines that are applied to other generating facilities in the Balancing Authority Area on a comparable basis. The term “voltage ride through” as used herein shall mean the ability of a Small Generating Facility to stay connected to and synchronized with the system or equipment of the Transmission Owner and any Affected Systems during system disturbances within a range of under-voltage and over-voltage conditions, in accordance with Good Utility Practice and consistent with any standards and guidelines that are applied to other generating facilities in the Balancing Authority Area on a comparable basis.

  • Sample means urine, blood, breath, saliva, or hair.

  • Target Population means persons with low incomes who have one or more disabilities, including mental illness, HIV or AIDS, substance abuse, or other chronic health condition, or individuals eligible for services provided pursuant to the Lanterman Developmental Disabilities Services Act (Division 4.5 (commencing with Section 4500) of the Welfare and Institutions Code) and may include, among other populations, adults, emancipated minors, families with children, elderly persons, young adults aging out of the foster care system, individuals exiting from institutional settings, veterans, and homeless people.

  • Predictive emissions monitoring system or "PEMS" means all of the equipment necessary to monitor process and control device operational parameters (for example, control device secondary voltages and electric currents) and other information (for example, gas flow rate, O2 or CO2 concentrations), and calculate and record the mass emissions rate (for example, pounds per hour) on a continuous basis.

  • MSAA Indicator Technical Specifications document means, as the context requires, either or both of the document entitled “Multi-Sector Service Accountability Agreement (MSAA) 2019-20 Indicator Technical Specifications November 5, 2018 Version 1.3” and the document entitled “Multi-Sector Service Accountability Agreement (MSAA) 2019-20 Target and Corridor-Setting Guidelines” as they may be amended or replaced from time to time;

  • medium voltage means the set of nominal voltage levels that lie above low voltage and below high voltage in the range of 1 kV < Un 44 kV. [SANS 1019]

  • Smart Meter means a meter which tells us how much Energy you are using without us having to visit your home and which enables you to see how much Energy you are using;

  • Bid sample means a sample to be furnished by a bidder to show the characteristics of the item offered in the bid.

  • Category 4 Data is data that is confidential and requires special handling due to statutes or regulations that require especially strict protection of the data and from which especially serious consequences may arise in the event of any compromise of such data. Data classified as Category 4 includes but is not limited to data protected by: the Health Insurance Portability and Accountability Act (HIPAA), Pub. L. 104-191 as amended by the Health Information Technology for Economic and Clinical Health Act of 2009 (HITECH), 45 CFR Parts 160 and 164; the Family Educational Rights and Privacy Act (FERPA), 20 U.S.C. §1232g; 34 CFR Part 99; Internal Revenue Service Publication 1075 (xxxxx://xxx.xxx.xxx/pub/irs-pdf/p1075.pdf); Substance Abuse and Mental Health Services Administration regulations on Confidentiality of Alcohol and Drug Abuse Patient Records, 42 CFR Part 2; and/or Criminal Justice Information Services, 28 CFR Part 20.

  • regulatory action level RBC means the product of 1.5 and its authorized control level RBC;

  • Direction-indicator lamp means the lamp used to indicate to other road-users that the driver intends to change direction to the right or to the left;

  • Product Specification means a product specification for a Medical Device set out in Schedule 2;

  • Polystyrene foam adhesive means an aerosol adhesive designed to bond polystyrene foam to substrates.

  • Batch means a specific quantity of Product that is intended to be of uniform character and quality, within specified limits, and is produced during the same cycle of Manufacture as defined by the applicable Batch Record.

  • Compression ignition engine means an internal combustion engine with operating characteristics significantly similar to the theoretical diesel combustion cycle. The regulation of power by controlling fuel supply in lieu of a throttle is indicative of a compression ignition engine.

  • Process weight means the total weight of all materials introduced into any source operation. Solid fuels charged will be considered as part of the process weight, but liquid and gaseous fuels and combustion air will not.

  • Feed ingredient means each of the constituent materials making up a commercial feed.