Examples of Procedure B in a sentence
The cement shall have a minimum 80 percent relative dynamic modulus of elasticity; and shall not have a weight (mass) gain in excess of 0.15 percent or a weight (mass) loss in excess of 1.0 percent, after 100 cycles, according to AASHTO T 161, Procedure B.
The cement shall have a minimum 80 percent relative dynamic modulus of elasticity; and shall not have a weight (mass) gain in excess of 0.15 percent or a weight (mass) loss in excess of 1.0 percent, after 100 cycles, according to Illinois Modified AASHTO T 161, Procedure B.
For freeze-thaw testing, the Department will perform the test according to AASHTO T 161, Procedure B.
Manufacturer must certify that the elastomeric compound passes Grade 3 Low-Temperature Brittleness as determined by ASTM D746 – Brittleness Temperature of Plastics and Elastomers by Impact, Procedure B.
Acceptance shall be in accordance with ASTM D 4759 based on testing of either conformance samples obtained using Procedure A of ASTM D 4354, or based on manufacturer’s certifications and testing of quality control samples obtained using Procedure B of ASTM D 4354.
Procedure B: in a standing crop of a given variety of hemp, the upper third of each plant selected shall be taken.
An adjunct faculty member scheduled for a Procedure B review may change to a Procedure A review upon request within one (1) week following notification of the procedure to be used.
Procedure A may be used in lieu of Procedure B 3.1.2 Construction Requirements.
If the Procedure A review was “satisfactory,” then the next performance review of the tenured faculty member will utilize Procedure B, the less rigorous procedure.
Procedure B: the sample shall comprise parts of 200 plants per field.Each sample shall be placed in a fabric or paper bag, without crushing it, and be sent to the laboratory for analysis.