Program Capacity definition

Program Capacity means eighty-five (85) percent of the maximum number of students that a program or school can contain as determined solely by considerations of physical space and class size for each grade level, as identified in 14 Del.C. §405(c).
Sample 1Sample 2Sample 3
Program Capacity means the number of beds licensed for residential treatment in a location;
Sample 1Sample 2Sample 3
Program Capacity means the maximum number of children with disabilities that can be enrolled in a school, class or program as specified in Ed 1100.
Sample 1Sample 2

Examples of Program Capacity in a sentence

  • Subject to Program Capacity Limitations, as set-forth below, the Electric Company will accept applications to participate in the Pilot Program and administer the Pilot Program’s queue for the duration of the Pilot Program.

  • The Current Capacity of the school building is then calculated by subtracting the Program Capacity from the school year enrollment.

  • For that purpose, an annual review of educational programs within each school will be completed in following plan updates that may adjust the Program Capacity of the building in any given year.

  • Funding and Program Capacity DSAMH will enter into a Fee for Service contract with the successful proposer(s) to provide the range of services stipulated in this RFP and will provide payment only for uninsured individuals.

  • The number of portable teaching stations, with its related capacity, is shown for informational purposes only and not included in the Program Capacity calculation.

  • Program Capacity Made Available Annually (MW)Vintage Acceptance of a CSEGS into the Small/Brownfield/Other, Low and Moderate Income (LMI), or Open categories will be in accordance with definitions and procedures set-forth in COMAR Section20.62.

  • Program Capacity Allocation is determined by the CPUC in Resolution E-4999 (Table 1, pg.

  • PG&E will hold at least two DAC solicitations per year, and any remaining available capacity for a given solicitation will be rolled over to the next solicitation until the Program Capacity Allocation has been met.

  • Program Capacity Made Available Annually (MW) Year 1Year 2Year 3Year 4Year 5Year 6Year 7 Acceptance of a CSEGS into the Small/Brownfield/Other, Low and Moderate Income (LMI), or Open categories will be in accordance with definitions and procedures set-forth in COMAR Section20.62.

  • Based upon the common model that provides a planning period for each teaching station during a six period day, this plan assumes a Utilization Factor of 83% (5/6) that is factored into the Program Capacity at the junior high and high school level.


More Definitions of Program Capacity

Program Capacity means the maximum number of Offenders authorized to be placed in a program.
Sample 1
Program Capacity. A FDOE regulated space within a school used to meet the needs of special programs, including exceptional education and English for Speakers of Other Languages (ESOL) classes, which contribute to a school’s capacity.
Sample 1
Program Capacity means the amount of classroom space needed to addre s
Sample 1
Program Capacity. The capacity of a school once the space needs for programs including, but not limited to, English as a Second Language (ESOL), special programs for the emotionally handicapped, autistic and varying exceptionalities have been addressed.
Sample 1

Related to Program Capacity

  • Project Capacity means the AC capacity of the project at the generating terminal(s) and to be contracted with MSEDCL for supply from the Solar Power Project.

  • Contract Capacity has the meaning set forth in Section 3.1(f).

  • RA Capacity means the maximum megawatt amount that the CAISO recognizes from a Project that qualifies for Buyer’s Resource Adequacy Requirements and is associated with the Project’s Capacity Attributes.

  • System Capacity means the operational capacity of the System at any applicable point in time.

  • Licensed capacity means the number of children the Department has determined the day care home can care for at any one time in addition to any children living in the home who are under the age of 12 years. Children age 12 and over on the premises are not considered in determining licensed capacity.

  • New Capacity means a new Generator, a substantial addition to the capacity of an existing Generator, or the reactivation of all or a portion of a Generator that has been out of service for five years or more that commences commercial service after the effective date of this definition. For purposes of Section 23.4.5 of this Attachment H, “Offer Floor” for a Mitigated Capacity Zone Installed Capacity Supplier that is not a Special Case Resource shall mean the lesser of (i) a numerical value equal to 75% of the Mitigation Net CONE translated into a seasonally adjusted monthly UCAP value (“Mitigation Net CONE Offer Floor”), or (ii) the numerical value that is the first year value of the Unit Net CONE determined as specified in Section 23.4.5.7, translated into a seasonally adjusted monthly UCAP value using an appropriate class outage rate, (“Unit Net CONE Offer Floor”). The Offer Floor for a Mitigated Capacity Zone Installed Capacity Supplier that is a Special Case Resource shall mean a numerical value determined as specified in Section 23.4.5.7.5. The Offer Floor for Additional CRIS MW shall mean a numerical value determined as specified in Section 23.4.5.7.6. For the purposes of Section 23.4.5 of this Attachment H, “Non-Qualifying Entry Sponsors” shall mean a Transmission Owner, Public Power Entity, or any other entity with a Transmission District in the NYCA, or an agency or instrumentality of New York State or a political subdivision thereof.

  • Idle capacity means the unused capacity of partially used facilities. It is the difference between: (a) that which a facility could achieve under 100 percent operating time on a one-shift basis less operating interruptions resulting from time lost for repairs, setups, unsatisfactory materials, and other normal delays; and (b) the extent to which the facility was actually used to meet demands during the accounting period. A multi-shift basis should be used if it can be shown that this amount of usage would normally be expected for the type of facility involved.

  • Excess Capacity means volume or capacity in a duct, conduit, or support structure other than a utility pole or anchor which can be used, pursuant to the orders and regulations of the Commission, for a pole attachment.

  • Design capacity means the volume of a containment feature at a discharging facility that accommodates all permitted flows and meets all Aquifer Protection Permit conditions, including allowances for appropriate peaking and safety factors to ensure sustained, reliable operation.

  • Technical Capacity means the maximum firm capacity that the transmission system operator can offer to the network users, taking account of system integrity and the operational requirements of the transmission network;

  • Bid Capacity meanss capacity offered by the bidder in his Bid under invitation.

  • Contracted Capacity means the capacity (in MW AC) contracted with MSEDCL for supply by the successful bidder at the Delivery Point from the Solar Power Project.

  • Nameplate capacity means the maximum electrical generating output (in MWe) that a generator can sustain over a specified period of time when not restricted by seasonal or other deratings as measured in accordance with the United States Department of Energy standards.

  • Potential electrical output capacity means, with regard to a unit, 33 per- cent of the maximum design heat input of the unit.

  • Storage Capacity means any combination of space, injectability and deliverability.

  • Nominal Capacity means the volume indicated by the manufacturer that represents the maximum recommended filling level.

  • Committed Capacity means that portion of the Capacity that is required to meet the Capacity Entitlements of Access Holders;

  • Maximum Capacity or ‘Pmax’ means the maximum continuous active power which a power-generating module can produce, less any demand associated solely with facilitating the operation of that power-generating module and not fed into the network as specified in the connection agreement or as agreed between the relevant system operator and the power-generating facility owner;

  • Reserved Capacity means the maximum amount of capacity and energy that the Transmission Provider agrees to transmit for the Transmission Customer over the Transmission Provider’s Transmission System between the Point(s) of Receipt and the Point(s) of Delivery under Tariff, Part II. Reserved Capacity shall be expressed in terms of whole megawatts on a sixty (60) minute interval (commencing on the clock hour) basis.

  • Additional Capacity means, in relation to the Network, the capability of the Network to carry additional task by an enhancement or improvement of the infrastructure forming part of the Network or Associated Facilities;

  • Rated Capacity means the Average Daily Flow for which the Works are approved to handle;

  • Available Capacity means the capacity from the Project, expressed in whole megawatts, that is available to generate Product. [For As-Available Product facilities only]

  • Unforced Capacity shall have the meaning specified in the Reliability Assurance Agreement.

  • Generation Capacity Resource shall have the meaning specified in the Reliability Assurance Agreement. Generation Interconnection Customer:

  • Local Capacity Area has the meaning set forth in the CAISO Tariff.

  • Base Capacity Resource means a Capacity Resource as described in Tariff, Attachment DD, section 5.5A(b).