Runway End definition

Runway End means existing physical end of the hard-surfaced asphalt runway, having a defined coordinate and elevation.

Examples of Runway End in a sentence

  • Electrical and Communications System locations, lines and grades including but not limited to duct runs, connections, fixtures, signs, lights, Visual Approach Slope Indicators (VASIs), Precision Approach Path Indicators (PAPIs), Runway End Identifier Lighting (REIL), Wind Cones, Distance Markers (signs), pull boxes and manholes.

  • Runway 16/34 will be closed between: The threshold of Runway 16 to a point 77.5m north of Runway 09/27 centerline. 77.5m south of Runway 09/27 centerline to 51 meters north of Taxiway Echo centreline 51m south of Taxiway Echo centreline to the Runway End of Runway 16.

  • Relocate the visual glide slope indicator (VGSI), such as VASI and PAPI; other airport lights, such as Runway End Identifier Lights (REIL); and approach lights to identify the temporary threshold.

  • Place any Precision Approach Path Indicators (PAPIs), Visual Approach Slope Indicators (VASIs), Runway End Identification Lights (REILs), or approach lights systems for the relocated runway threshold end out of service.

  • ActivityD1Buildings for permitted, controlled and restricted discretionary activities in Rules 16.6.1 and 16.6.6.1 within the area defined on the Industrial Park Zone (Memorial Avenue) Outline Development Plan (Appendix 16.8.15) as “Airport Runway End Protection Area”, other than enclosed walkways which:a.

  • Nomination by Governance Committee.–The governance committee shall prepare a slate of candidates to serve as outside Directors who meet the qualifications set forth in Article III, Section 3 of these bylaws and shall submit its candidates to the Board for approval no later than the May regular Board meeting.

  • To avoid any buildings or activities in the Runway End Protection Area which result in the mass assembly of people.

  • Replacement of existing airport-owned Runway 16 Runway End Identifier Lights (REILs).5.

  • The width of the Runway End Subzone shall narrow as the distance from the end of the Runway Subzone increases.

  • Municipalities shall, when developing land use ordinances to conform with the provisions of this chapter, adopt general land use provisions within the ordinance to minimize unwarranted concentrations of persons within Airport Safety Zones, especially along the extended runway centerlines within Runway End Subzones.

Related to Runway End

  • Runway means a defined rectangular area on a land aerodrome prepared for the landing and take-off of aircraft;

  • Diameter at breast height (dbh) means the diameter of a tree at 4 1/2 feet above the ground measured from the uphill side.

  • Peak tube potential means the maximum value of the potential difference across the x-ray tube during an exposure.

  • Cold Weather Alert means the notice that PJM provides to PJM Members, Transmission Owners, resource owners and operators, customers, and regulators to prepare personnel and facilities for expected extreme cold weather conditions.

  • X-ray high-voltage generator means a device which transforms electrical energy from the potential supplied by the x-ray control to the tube operating potential. The device may also include means for transforming alternating current to direct current, filament transformers for the x-ray tube(s), high-voltage switches, electrical protective devices, and other appropriate elements.

  • Runoff coefficient means the fraction of total rainfall that will appear at the conveyance as runoff.

  • Material support and resources means currency or monetary instruments or financial securities, financial services, lodging, training, expert advice or assistance, safehouses, false documentation or identification, communications equipment, facilities, weapons, lethal substances, explosives, personnel, transportation, and other physical assets, except medicine or religious materials.”

  • Diameter means the diameter of the stem of a tree measured outside the bark at a specified point of measurement.

  • Lockdown means the period between 23H59 on 26 March 2020, until 23H59 on 30 April 2020;

  • Fixed wing turbine powered aircraft means an aircraft that:

  • Submerged fill pipe means any fill pipe with the discharge opening entirely submerged when the liquid level is six inches above the bottom of the tank; or when applied to a tank which is loaded from the side, shall mean any fill pipe with the discharge opening entirely submerged when the liquid level is eighteen inches above the bottom of the tank.

  • JetBrains or “We” means JetBrains s.r.o., having its principal place of business at Xx Xxxxxxxxx XX 0000/00, Xxxxxx, 00000, Xxxxx Xxxxxxxx, registered in the Commercial Register maintained by the Xxxxxxxxx Xxxxx xx Xxxxxx, Xxxxxxx X, Xxxx 00000, ID. No.: 265 02 275.

  • Model 1 seller means a seller registered under the agreement that has selected a certified service provider as the seller's agent to perform all of the seller's sales and use tax functions for agreement sales and use taxes other than the seller's obligation under Section 59-12-124 to remit a tax on the seller's own purchases.

  • Pump spray means a packaging system in which the product ingredients within the container are not under pressure and in which the product is expelled only while a pumping action is applied to a button, trigger or other actuator.

  • Non-Methane Hydrocarbons (NMHC means the sum of all hydrocarbon air pollutants except methane.

  • Curb Stop means the City-owned valve on a service pipe located on a City street or lane or right-of-way or within an easement at or near the consumer’s property line, or easement line.

  • Bulkhead means an airtight structure separating the working chamber from free air or from another chamber under a lower pressure than the working pressure;

  • Torso line means the centreline of the probe of the 3-D H machine with the probe in the fully rearward position;

  • Model 2 seller means a seller registered under the agreement that:

  • GAC10 means granular activated carbon filter beds with an empty-bed contact time of 10 minutes based on average daily flow and a carbon reactivation frequency of every 180 days, except that the reactivation frequency for GAC10 used as a best available technology for compliance with MCLs under subsection 9.2.1.2 shall be 120 days.

  • Combustion turbine means an enclosed fossil or other fuel-fired device that is comprised of a compressor, a combustor, and a turbine, and in which the flue gas resulting from the combustion of fuel in the combustor passes through the turbine, rotating the turbine.

  • Fire alarm system means a system designed to detect and annunciate the presence of fire, or by-products of fire. Fire alarm system includes smoke detectors.

  • Sewage sludge fee weight means the weight of sewage sludge, in dry U.S. tons, excluding admixtures such as liming materials or bulking agents. Annual sewage sludge fees, as per section 3745.11(Y) of the Ohio Revised Code, are based on the reported sludge fee weight for the most recent calendar year.

  • Carpet and upholstery cleaner means a cleaning product designed for the purpose of eliminating dirt and stains on rugs, carpeting, and the interior of motor vehicles and/or on household furniture or objects upholstered or covered with fabrics such as wool, cotton, nylon or other synthetic fabrics. “Carpet and Upholstery Cleaner” includes, but is not limited to, products that make fabric protectant claims. “Carpet and Upholstery Cleaner” does not include “General Purpose Cleaners”, “Spot Removers”, vinyl or leather cleaners, dry cleaning fluids, or products designed exclusively for use at industrial facilities engaged in furniture or carpet manufacturing.

  • Uppermost aquifer means the geologic formation nearest the natural ground surface that is an aquifer, as well as lower aquifers that are hydraulically interconnected with this aquifer within the facility's property boundary.

  • Single Phase Aerosol Air Freshener means an aerosol air freshener with the liquid contents in a single homogeneous phase and which does not require that the product container be shaken before use.