Safety Boots definition

Safety Boots means enclosed steel capped boots, which are compliant with the workplace health and safety legislation applicable at the production operation sites of MediHerb.
Sample 1
Safety Boots. The contractor will provide all field employees with steel-toe safety boots and steel toe rubber boots.
Sample 1

Examples of Safety Boots in a sentence

  • All personnel at site should be provided with Helmets and Safety Boots with some Identification Mark.

  • Eligible employees will be provided with boots in compliance with the County of Monterey Safety Boots Program.

  • The members shall provide the Safety Boots and Hats at their own expense unless the Contractor demands a Safety Hat of a particular colour or style, in which case, the Contractor shall supply it at the Contractor's expense.

  • Safety Boots - A safety boot allowance of $250.00 shall be provided annually by the end of July of each year for positions shown on Exhibit B.

  • The above employees will be eligible to receive a pair of either Safety Shoes or Safety Boots once every calendar year.

  • However, any employee who works greater than 30 days in a three (3) consecutive month period will be entitled to benefit reinstatement as follows This will confirm our agreement that laid off workers who perform short term work assignments as per Article 15.01 of this Collective Agreement will receive the following (Paid Holidays, consistent with the usual qualifiers ; Bereavement Leave and pay ; Safety Boots ; Social Justice Fund contribution; Pension Credits ; Vacation pay accumulation).

  • Long Sleeve Shirt Overalls Machinist Coat Short Sleeve Shirt White Overalls Cloth Parka Work Pants White Coat Nylon Parka Coveralls White Pants Blue Jeans Tee Shirt Xxxxx Lined Winter Safety Boots Women have the ability to select from women’s clothing.

  • The members shall provide the Safety Boots, Safety Harness and Safety Hats at their own expense unless the Contractor demands a Safety Hat of a particular colour or style, in which case, the Contractor shall supply it at the Contractor's expense.

  • The wearing of Safety Boots will be compulsory in those classifications.

  • All employees must supply their own CSA Green Tag Safety Boots and NIOSH safety hat.

Related to Safety Boots

  • Safety Plan means a written document that has procedures, requirements, or standards related to safety which the pool staff shall follow. The safety plan shall include training and emergency response procedures.

  • Safety zone means the area officially set apart within a roadway for the exclusive use of

  • Safety Management System means a systematic approach to managing safety, including the necessary organisational structures, accountabilities, policies and procedures;

  • health and safety file means a file, or other record containing the information in writing required by these Regulations "health and safety plan" means a site, activity or project specific documented plan in accordance with the client's health and safety specification;

  • Dynamic driving task means the same as that term is defined in Section 41-26-102.1.

  • Safety Consultant shall have the meaning set forth in Clause 10.1;

  • Imminent danger to the health and safety of the public means the existence of any condition or practice, or any violation of a permit or other requirement of this article, in a surface coal mining and reclamation operation which could reasonably be expected to cause substantial physical harm to persons outside the permit area before such condition, practice, or violation can be abated. A reasonable expectation of death or serious injury before abatement exists if a rational person, subjected to the same conditions, or practices giving rise to the peril, would not expose himself to the danger during the time necessary for abatement.

  • Imminent safety hazard means an imminent and unreasonable risk of death or severe personal injury.

  • Health and Safety Plan means a documented plan which addresses hazards identified and includes safe work procedures to mitigate, reduce or control the hazards identified;

  • health and safety specification means a site, activity or project specific document prepared by the client pertaining to all health and safety requirements related to construction work;

  • Safety Data Sheet means a safety data sheet within the meaning of regulation 5 of the CHIP Regulations;

  • Quality Assurance Plan or “QAP” shall have the meaning set forth in Clause 11.2;

  • Environmental Management System means an environmental management system or plan of management to address all environmental risks and to ensure compliance with all Environmental Laws and licences;

  • Safety Convention means the International Convention for the Safety of Life at Sea, 1974 (a copy of the English text of the articles of which, and of part of the annex to which, is set forth in Schedule 4), as affected by any amendment, other than an amendment objected to by Australia, made under Article VIII of that Convention and, after the date on which the Protocol of 1978 relating to the Safety Convention enters into force for Australia, as also affected by that Protocol;

  • Environmental, Health and Safety Laws means the Comprehensive Environmental Response, Compensation and Liability Act of 1980, the Resource Conservation and Recovery Act of 1976, and the Occupational Safety and Health Act of 1970, each as amended, together with all other laws (including rules, regulations, codes, plans, injunctions, judgments, orders, decrees, rulings, and charges thereunder) of federal, state, local, and foreign governments (and all agencies thereof) concerning pollution or protection of the environment, public health and safety, or employee health and safety, including laws relating to emissions, discharges, releases, or threatened releases of pollutants, contaminants, or chemical, industrial, hazardous, or toxic materials or wastes into ambient air, surface water, ground water, or lands or otherwise relating to the manufacture, processing, distribution, use, treatment, storage, disposal, transport, or handling of pollutants, contaminants, or chemical, industrial, hazardous, or toxic materials or wastes.

  • Material safety data sheet or "MSDS" means the chemical, physical, technical, and safety information document supplied by the manufacturer of the coating, solvent, or other chemical product, usually through the distribution network or retailers.

  • Quality Assurance Program means the overall quality program and associated activities including the Department’s Quality Assurance, Design-Builder Quality Control, the Contract’s quality requirements for design and construction to assure compliance with Department Specifications and procedures.

  • Safety means any product which, under normal or reasonably foreseeable conditions of use including duration and, where applicable, putting into service, installation and maintenance requirements, does not present any risk or only the minimum risks compatible with the product's use, considered to be acceptable and consistent with a high level of protection for the safety and health of persons.

  • Safety-sensitive function means all time from the time a driver begins to work or is required to be in readiness to work until the time he/she is relieved from work and all responsibility for performing work.

  • New Jersey Stormwater Best Management Practices (BMP) Manual or “BMP Manual” means the manual maintained by the Department providing, in part, design specifications, removal rates, calculation methods, and soil testing procedures approved by the Department as being capable of contributing to the achievement of the stormwater management standards specified in this chapter. The BMP Manual is periodically amended by the Department as necessary to provide design specifications on additional best management practices and new information on already included practices reflecting the best available current information regarding the particular practice and the Department’s determination as to the ability of that best management practice to contribute to compliance with the standards contained in this chapter. Alternative stormwater management measures, removal rates, or calculation methods may be utilized, subject to any limitations specified in this chapter, provided the design engineer demonstrates to the municipality, in accordance with Section IV.F. of this ordinance and N.J.A.C. 7:8-5.2(g), that the proposed measure and its design will contribute to achievement of the design and performance standards established by this chapter.

  • FOIPPA means the Freedom of Information and Protection of Privacy Act;

  • Environmental, Health and Safety Liabilities means any cost, damages, expense, liability, obligation or other responsibility arising from or under any Environmental Law.

  • Environmental Management Plan or “EMP” means the environmental management plan for the Project, including any update thereto, incorporated in the IEE;

  • Workplace safety means those conditions related to physical health and safety of employees enforceable under federal or state law, or District rule related to: safety of the physical work environment, the safe operation of workplace equipment and tools, provision of protective equipment, training and warning requirements, workplace violence and accident risk.

  • Safety Standards means all laws, union rules and trade or industry custom or codes of any kind whatsoever, in effect from the date of this Agreement through Final Acceptance of the construction work, pertaining to worker safety and accident prevention applicable to the Project and/or the construction work (including, but not limited to, rules, regulations and standards adopted pursuant to the Occupational Safety and Health Act of 1970, as amended from time to time).

  • Environmental, Health, and Safety Requirements means all federal, state, local and foreign statutes, regulations, and ordinances concerning public health and safety, worker health and safety, and pollution or protection of the environment, including without limitation all those relating to the presence, use, production, generation, handling, transportation, treatment, storage, disposal, distribution, labeling, testing, processing, discharge, release, threatened release, control, or cleanup of any hazardous materials, substances or wastes, as such requirements are enacted and in effect on or prior to the Closing Date.