Sampling schedule definition

Sampling schedule means the frequency required for submitting drinking water samples to a certified laboratory for examination.
Sample 1Sample 2Sample 3

Examples of Sampling schedule in a sentence

  • Each individual shall be thoroughly trained in sampling protocols, handling and chain of custody procedures, and laboratory requirements.• List of all laboratory tests required by the disposal/treatment facility;• Describe the sample collection and handling procedures to be used; and• Sampling schedule or a description of the sampling frequency to be used to facilitate prompt disposal of stored soil.

  • Summary Data< Annual arithmetic mean, and< Sampling schedule used as once every 6-day schedule.

  • Sampling schedule and conditions may require that upstream reaches are sampled before a downstream reach.

  • Usual experimental conditions are e.g.: Apparatus: paddle or basket Volume of dissolution medium: 900 ml or less Temperature of the dissolution medium: 37±1 °C Agitation: paddle apparatus - usually 50 or 75 rpmbasket apparatus - usually 100 rpm Sampling schedule: e.g. 10, 15, 20, 30 and 45 min Buffer: pH 1.0 – 1.2 (usually 0.1 N HCl or SGF without enzymes), pH 4.5, and pH 6.8 (or SIF without enzymes); (pH should be ensured throughout the experiment; Ph.Eur.

  • Sampling schedule Sampling will take place only during cycle 1 of therapy.

  • Sampling schedule will be proposed by the Sponsor and discussed with the site.

  • Figure 6.2 Sampling schedule based on ratio to the 24-hour PM10 NAAQS Manual PM10–2.5 samplers at NCore stations must operate on at least a 1-in-3 day schedule at sites without a collocated continuously operating federal equivalent PM10–2.5 method that has been designated in accordance with 40 CFR Part 53.

  • WHAT DOES THIS DATA REPRESENT?The water quality information presented in the table(s) is from the most recent round of testing done in accordance with our DEP Sampling schedule.

  • Sampling schedule for cows challengedwith Streptococcus uberis 444.

  • Conclusion 81APPENDIX 94REFERENCES 106BIOGRAPHICAL SKETCH 113 LIST OF TABLES‌ Table 3.1. Experimental set-up of dissolution-rate experiments I and II 26Table 3.2. Sampling schedule for dissolution-rate experiment I 27Table 3.3. Sampling schedule for dissolution-rate experiment II.

Related to Sampling schedule

  • Monitoring Schedule means the Schedule containing details of the monitoring arrangements.

  • Pricing Schedule means the Schedule attached hereto identified as such.

  • Delivery Schedule means the schedule for the delivery of Services as set forth in attached Annex 3.

  • Yearly (1/Year) sampling frequency means the sampling shall be done in the month of September, unless specifically identified otherwise in the effluent limitations and monitoring requirements table.

  • Yearly (1/Year) sampling frequency means the sampling shall be done in the month of September, unless specifically identified otherwise in the effluent limitations and monitoring requirements table.

  • Baseline Schedule means the initial time schedule prepared by Contractor for Owner’s information and acceptance that conveys Contractor’s and Subcontractors’ activities (including coordination and review activities required in the Contract Documents to be performed by A/E and ODR), durations, and sequence of work related to the entire Project to the extent required by the Contract Documents. The schedule clearly demonstrates the critical path of activities, durations and necessary predecessor conditions that drive the end date of the schedule. The Baseline Schedule shall not exceed the time limit current under the Contract Documents.

  • Work Schedule means the approved order and timeline for how the requirements of this contract, including Work on individual Units or groups of Units, will be fulfilled by the Contractor.

  • Service Specification means and include detailed description, statements to technical data, performance characteristics, and standards (Indian as well as) as applicable and as specified in the Contract as well as those specifications relating to Industry standards and codes applicable to the performance of the work, work performance quality and the specifications affecting the works or any additional specification required to be produced by the DCO to meet the design criteria.

  • The Specification means the Specification annexed to or issued with G.T.C.C. and shall include the schedules & drawings attached thereto as well as all samples and pattern, if any.

  • technical specification means, with respect to any Software, the document setting forth the technical specifications for such Software and included in the Statement of Work.

  • Service Specifications means the following documents, as applicable to the Services under Your order:

  • Technical Specifications means the detailed requirements for the Work furnished by the Architect and set forth in Book 3 of the Contract Documents.

  • Product Schedule means PTC’s standard order form entitled “PTC Product Schedule” (including all schedules, attachments and other document(s) specifically referenced therein) or such alternative order form as may be submitted by Customer and accepted by PTC, in each case that specifies (i) the Licensed Products and/or Services ordered; and (ii) for Licensed Products, the installation address (including the Designated Country) and the Licence Term.

  • Contract Specifications means the principal trading terms in CFD (for example Spread, Swaps, Lot Size, Initial Margin, Necessary Margin, Hedged Margin, the minimum level for placing Stop Loss, Take Profit and Limit Orders, financing charges, charges etc) for each type of CFD as determined by the Company from time to time.

  • Optional Extended Local Calling Scope Arrangement Traffic is traffic that under an optional Extended Local Calling Scope Arrangement chosen by the Customer terminates outside of the Customer’s basic exchange serving area.

  • Sampling means the distribution of samples to members of the general public in a public place.

  • MSAA Indicator Technical Specifications document means, as the context requires, either or both of the document entitled “Multi-Sector Service Accountability Agreement (MSAA) 2019-20 Indicator Technical Specifications November 5, 2018 Version 1.3” and the document entitled “Multi-Sector Service Accountability Agreement (MSAA) 2019-20 Target and Corridor-Setting Guidelines” as they may be amended or replaced from time to time;

  • Service Specific Terms has the meaning given in the G Suite Agreement or Complementary Product Agreement, as applicable, or, if Customer’s G Suite Agreement does not define “Service Specific Terms”, means the then-current terms specific to one or more Core Services for G Suite set out at xxxxx://xxxxxx.xxxxxx.xxx/terms/service-terms/.

  • INTER-CONNECTION POINT/ DELIVERY/ METERING POINT means a single point at 220kV or above, where the power from the Project(s) is injected into the identified ISTS Substation (including the dedicated transmission line connecting the Projects with the substation system) as specified in the RfS document. Metering shall be done at this interconnection point where the power is injected into. For interconnection with grid and metering, the WPDs shall abide by the relevant CERC/ SERC Regulations, Grid Code and Central Electricity Authority (Installation and Operation of Meters) Regulations, 2006 as amended and revised from time to time.

  • Contract Schedule means a schedule to this Contract;

  • Milestone Schedule means Seller’s milestone schedule, the form of which is attached to this Agreement as Exhibit Q.

  • Swap Specification means, with respect to any Swap, the Rules or other trading protocols containing specifications for such Swap, as adopted, amended, supplemented or otherwise modified from time to time by BSEF.

  • Data matrix means a two-dimensional matrix symbology, which is made up of square or, in some cases, round modules arranged within a perimeter finder pattern and uses the Error Checking and Correction 200 (ECC200) specification found within International Standards Organization (ISO)/International Electrotechnical Commission (IEC) 16022.

  • Recalibration means the adjustment of all DRG weights to reflect changes in relative resource consumption.

  • Semi-annual (2/Year) sampling frequency means the sampling shall be done during the months of June and December, unless specifically identified otherwise.

  • Specification Schedule means the Schedule containing details of the Specification.