Scenario A definition

Scenario A means that Seller assumes the load obligation(s) at the CL&P Metering Domains and will assume all associated LMP costs.
Sample 1Sample 2Sample 3
Scenario A. The consumer receives the requested data as agreed but raise a genuine complaint about the latency in providing the hashes to the network. The cost SC will evaluate this claim by checking the dates of appended hash values on the chain, using the block’s timestamp. As the consumer’s claim is genuine, the agreement will then be revoked, triggering the calculation of costs as follows: ActPayment = Dp × (RvcDate − StartDate) PrdReimbursement = ActPayment (1) CnsRefund = (CnsPayment − ActPayment) + Eprd + Ecns Scenario B: The consumer falsely claims the data is corrupted or incomplete, or that the hash values are not appended to the chain in a timely fashion. In this case, the cost SC will evaluate both cases to validate the claim. The former is evaluated by requesting the received data which is signed using the provider’s private key that verifies the data source, and then the SC will perform a hashing process to the data, enabling it to be compared with the hashed value that is stored on-chain. The latency in appending hash values will be validated as mentioned before in scenario A. In this scenario, the consumer’s claim will be found to be false by the SC, and as a result the agreement will be revoked and the cost will be calculated as follows: ActPayment = Dp × (RvcDate − StartDate) PrdReimbursement = ActPayment + Eprd + Ecns (2) CnsRefund = CnsPayment − ActPayment Scenario C: The consumer revokes the agreement without raising any claim. In this case the agreement will be revoked and the cost will be calculated as follows: ActPayment = Dp × (RvcDate − StartDate) PrdReimbursement = ActPayment + Eprd (3) CnsRefund = CnsPayment − ActPayment + Ecns A similar process will be triggered when the agreement reaches the expiry date without any revocation or complaints from the consumer’s side: ActPayment = Dp × (ExpDate − StartDate) PrdReimbursement = ActPayment + Eprd (4) CnsRefund = CnsPayment − ActPayment + Ecns Scenario D: The provider sends falsified data to the consumer. In this case, the consumer raises a claim providing the received data to the SC, which compares it to the hash value stored on the chain. As a result of the provider’s actions, the agreement will be revoked, triggering the calculation of costs according to equation (1).
Sample 1Sample 2Sample 3
Scenario A means the situation where a Tenderer does not own the Aircraft on the date of its Tender.
Sample 1

Examples of Scenario A in a sentence

  • As illustrated under Scenario A in the tables above, such purchase of Shares will have the effect of reducing the working capital and net tangible assets of the Company and of the Group by the dollar value of the Shares purchased.

  • As illustrated under Scenario A in the tables above, such purchase of Shares will have the effect of reducing the working capital and NAV of the Company and of the Group by the dollar value of the Shares purchased.

  • RTD Scenario A GEO, transparent 541.46ms Scenario C LEO, transparent 25.77ms (600km) 41.77ms (1200km) The following contributions in RAN2-111e proposed an extension of RLC t-Reassembly Timer: R2-2006640, R2-2006703, R2-2006782 and R2-2007785.

  • Their observations for this case are in line with their observations for Indoor Scenario A.

  • The various possible scenarios are set out below: — Scenario A: The AP contacts all infrastructure managers involved directly (case A) or via the One Stop Shop (case B) to organise the paths for the complete journey.

  • As illustrated under Scenario A in the tables above, such purchase of Shares will have the effect of reducing the working capital and NTA of the Company and of the Group by the US$ value of the Shares purchased.

  • For example: Scenario A: All providers and locations associated with the Group bill for Medicaid services under ONE Medicaid number.Group Volume: All encounters across all locations and among all providers would be included.

  • If your proposed research involves the use of human data and/or biological specimens, you must provide a justification for your claim that no human subjects are involved in the Protection of Human Subjects section of the Research Plan.See the instructions for Scenario A.

  • This is illustrated below: Scenario A AdvisesManagesInvestsFundRetail InvestorsA/I LFMCFund Manager Scenario B – An A/I LFMC may also be the investment manager, sub-manager or adviser to a fund which another pension fund or fund-of-funds invests in.

  • This is illustrated below: Scenario A A/I LFMC may act as sub-manager and adviser to a fund offered to retail investors in Singapore in the following circumstances: Advises Manages InvestsSingapore Retail InvestorsFundOverseas Retail InvestorsRetail LFMC (Company Y)A/I LFMC (Company X) Scenario B – An A/I LFMC may also be the investment manager, sub-manager or adviser to a fund which another pension fund or fund-of-funds invests in.


More Definitions of Scenario A

Scenario A. The Post-Term Restriction Period Applies
Sample 1
Scenario A. All initial values are 0 and the processes in R are inactive. The messages sent from P Q to P Q are delivered in time 1. By t-resiliency, processes in P reach a decision (0 by validity) within a certain time, noted TA. To take this decision, every node i of P followed a path
Sample 1

Related to Scenario A

  • Sound level meter means an instrument which includes a microphone, amplifier, RMS detector, integrator or time averager, output meter, and weighting networks used to measure sound pressure levels.

  • True vapor pressure means the equilibrium partial pressure exerted by a petroleum liquid as determined in accordance with methods described in American Petroleum Institute (API) Bulletin 2517, Evaporation Loss from External Floating Roof Tanks, 1980. The API procedure may not be applicable to some high viscosity or high pour crudes. Available estimates of true vapor pressure may be used in special cases such as these.

  • Instantaneous flow measurement means the flow measured during the minimum time required for the flow-measuring device or method to produce a result in that instance. To the extent practical, instantaneous flow measurements coincide with the collection of any grab samples required for the same sampling period so that together the samples and flow are representative of the discharge during that sampling period.

  • Broadband level means all positions sufficiently similar in knowledge, skills, and abilities, and sufficiently similar as to kind or subject matter of work, level of difficulty or responsibilities, and qualification requirements of the work, to warrant the same treatment as to title, pay band, and other personnel transactions.

  • Potential electrical output capacity means, with regard to a unit, 33 per- cent of the maximum design heat input of the unit.

  • Network Termination Point (NTP) means the physical point at which a subscriber is provided with access to a public communications network; in the case of networks involving switching or routing, the NTP is identified by means of a specific network address, which may be linked to a subscriber number or name;

  • Service Switching Point (SSP) is a telephone central office switch equipped with a Signaling System 7 (SS7) interface.

  • Vehicle measuring attitude means the position of the vehicle as defined by the co-ordinates of fiducial marks in the three-dimensional reference system.

  • high voltage means the classification of an electric component or circuit, if its working voltage is > 60 V and ≤ 1500 V DC or > 30 V and ≤ 1000 V AC root mean square (rms).

  • High voltage bus means the electrical circuit, including the coupling system for charging the REESS, that operates on a high voltage.

  • Service Switching Point (SSP) means the telephone Central Office Switch equipped with a Signaling System 7 (SS7) interface.

  • Parameter means a measurable factor of a liquid, gas, or solid such as temperature, pH, length, or elevation, and includes constituents of the liquid, gas, or solid.

  • Qualifying Energy Efficiency Measures (EEMs) means either (i) standard gas or electric EEMs (i.e., measures found on any of the Standard Initiative applications); or (ii) measures eligible under the Custom Initiative approved by Ameren Illinois; or (iii) measures found in the Streetlighting or Retro-commissioning Initiative as identified in official program materials found on the Ameren Illinois Energy Efficiency website. The following technologies are not Qualifying EEMs: (i) technologies that do not demonstrate measurable and verifiable energy savings, including power conditioning; (ii) technologies that displace electrical energy use or natural gas to another fuel (i.e. fuel switching); or (iii) renewable energy projects (solar, wind power, etc.). Eligible gas measures do not include propane or butane measures.

  • low voltage means the set of nominal voltage levels that are used for the distribution of electricity and whose upper limit is generally accepted to be an a.c. voltage of 1000V ( or a d.c. voltage of 1500 V). [SANS 1019]

  • Routine use means the disclosure of a record without the consent of the subject or subjects, for a purpose which is compatible with the purpose for which the record was collected. It includes disclosures required to be made by statute other than the public records law, Iowa Code chapter 22.

  • Natural attenuation means a variety of physical, chemical or biological processes that, under favorable conditions, act without human intervention to reduce the mass, toxicity, mobility, volume, or concentration of hazardous substances in the environment. These in situ processes include: Natural biodegradation; dispersion; dilution; sorption; volatilization; and chemical or biological stabilization, transformation, or destruction of hazardous substances. See WAC 173- 340-370(7) for a description of the expected role of natural attenuation in site cleanup. A cleanup action that includes natural attenuation and conforms to the expectation in WAC 173- 340-370(7) can be considered an active remedial measure.

  • Enrollee point-of-service cost-sharing or "cost-sharing" means amounts paid to health carriers directly providing services, health care providers, or health care facilities by enrollees and may include copayments, coinsurance, or deductibles.

  • Access Compensation is the compensation paid by one Party to the other Party for the origination/termination of intraLATA toll calls to/from its End User. Access compensation is in accordance with the LEC’s tariffed access rates.

  • voltage ride through as used herein shall mean the ability of a Small Generating Facility to stay connected to and synchronized with the system or equipment of the Transmission Owner and any Affected Systems during system disturbances within a range of under-voltage and over-voltage conditions, in accordance with Good Utility Practice and consistent with any standards and guidelines that are applied to other generating facilities in the Balancing Authority Area on a comparable basis.

  • Barrier Level means the Barrier Level as specified in § 1 of the Product and Underlying Data.

  • INTER-CONNECTION POINT/ DELIVERY/ METERING POINT means a single point at 220kV or above, where the power from the Project(s) is injected into the identified ISTS Substation (including the dedicated transmission line connecting the Projects with the substation system) as specified in the RfS document. Metering shall be done at this interconnection point where the power is injected into. For interconnection with grid and metering, the WPDs shall abide by the relevant CERC/ SERC Regulations, Grid Code and Central Electricity Authority (Installation and Operation of Meters) Regulations, 2006 as amended and revised from time to time.

  • Business Continuity and Disaster Recovery Plan means the Schedule containing plans and provisions for business continuity and disaster recovery.

  • service well means a well drilled or completed for the purpose of supporting production in an existing field. Wells in this class are drilled for the following specific purposes: gas injection (natural gas, propane, butane or flue gas), water injection, steam injection, air injection, salt water disposal, water supply for injection, observation or injection for combustion.

  • General purpose radiographic x-ray system means any radiographic x-ray system which, by design, is not limited to radiographic examination of specific anatomical regions.

  • Predictive emissions monitoring system or "PEMS" means all of the equipment necessary to monitor process and control device operational parameters (for example, control device secondary voltages and electric currents) and other information (for example, gas flow rate, O2 or CO2 concentrations), and calculate and record the mass emissions rate (for example, pounds per hour) on a continuous basis.

  • medium voltage means the set of nominal voltage levels that lie above low voltage and below high voltage in the range of 1 kV < Un 44 kV. [SANS 1019]