Simple Assembly definition

Simple Assembly means a gathering of persons at a park, plaza or paseo that does not include any of the following:
Sample 1Sample 2Sample 3
Simple Assembly means an assembly of persons on an unreserved area of the Plaza, if the assembly does not include equipment, temporary structures, sales or distribution of commercial merchandise, food or beverages, or any of the other characteristics of a City Hall Plaza Event as described in Chapter 13.23 of the SJMC, with the exception of a hand carried microphone/loudspeaker and further provided that the assembly remains within the capacity limits of the applicable area of the Plaza.
Sample 1Sample 2Sample 3
Simple Assembly means an operation of assembling parts of articles without special skills, machines, apparatus or equipment especially produced or installed for carrying it out. Such operation does not include testing or inspection.
Sample 1Sample 2Sample 3

Examples of Simple Assembly in a sentence

  • Besides public reason there is social reason, concerned with associations in society, and there is domestic reason, concerned with families as small groups in society.

  • Once the objective function is to minimize Effort, the optimization results in an evenly balanced implementation workload between the transitions.In this paper, for simplicity, the balancing equations are modeled for a Simple Assembly Line Balancing Problem (SALBP).

  • Some Complexity Results for the Simple Assembly Line Balancing Problem, Proceedings of the 3rd International Conference Optimization and Applications (OPTIMA’2012), Costa da Caparica, Portugal, September 23-30, Edited by V.I. Zubov, Moscow, Russian Academy of Sciences, 2012, ISBN 978–5–91601–051–0, p.

  • Byrne, Hugo Águas, Ricardo Franco, Design and Simple Assembly of Gold Nanostar Bioconjugates for Surface-Enhanced Raman Spectroscopy Immunoassays, Nanomaterials, Vol.

  • A set of simplification hypothesis is often applied to balancing problems, resulting in the Simple Assembly Line Balancing Problem (SALBP).

  • SALBP-1, SALBP-2, SALBP-E, and SALBP-F are in the Simple Assembly Line Balancing Problems (SALBPs) whereas the U-shaped Assembly Line Balancing Problem (UALBP), Mixed-model Assembly Line Balancing Problem (MALBP) and so on are in the General Assembly Line Balancing Problems (GALBPs).

  • After importing a profile from the profile optimization algorithm, switching the profile of an existing corridor to the new profile may result in errors if custom cross-section assemblies without retaining walls are used in the existing corridor.If Profile Offsets are used, the algorithm uses a Simple Assembly as described in Section 5.1. The optimizer looks for the intersection of the daylight side slope with the ground surface.

  • Some Complexity Results for the Simple Assembly Line Balancing Problem, Proceedings of the 3rd International Conference Optimization and Applications (OPTIMA’2012), Costa da Caparica, Portugal, September 23-30, Edited by V.I. Zubov, Moscow, Russian Academy of Sciences, 2012, ISBN 978–5–91601–051– 0, p.

  • This problem is NP-hard, since it generalizes the NP-hard Simple Assembly Assembly Line Balancing Problem, and researches have focused mainly on heuristic methods for solving it (see for example Miralles et al.

  • One important class of ALBPs is called Simple Assembly Line Balancing Problems (SALBP), where the assembly line is producing a single type of product.


More Definitions of Simple Assembly

Simple Assembly means bringing together of components or the mixing of products which does not result in a substantial transformation of the final product.
Sample 1Sample 2Sample 3
Simple Assembly means the fitting together of five or fewer parts all of which are non-originating (excluding fasteners such as screws, bolts, etc.) by bolting, gluing, soldering, or sewing or by other means without more than minor processing.
Sample 1Sample 2Sample 3

Related to Simple Assembly

  • Backflow Prevention Assembly means any mechanical assembly installed at a water service line or at a plumbing fixture to prevent a backflow contamination event, provided that the mechanical assembly is appropriate for the identified contaminant at the cross connection and is an in-line field-testable assembly.

  • Tube housing assembly means the tube housing with tube installed. It includes high-voltage and/or filament transformers and other appropriate elements when such are contained within the tube housing.

  • Double check valve assembly means an assembly composed of two single, independently acting, check valves including tightly closing shutoff valves located at each end of the assembly and suitable connections for testing the water tightness of each check valve.

  • Certified Remanufacture System or Verified Engine Upgrade means engine upgrades certified or verified by EPA or CARB to achieve a reduction in emissions.

  • Fluoroscopic imaging assembly means a subsystem in which X-ray photons produce a visual image. It includes the image receptor(s) such as the image intensifier and spot-film device, electrical interlocks, if any, and structural material providing linkage between the image receptor and diagnostic source assembly.

  • Digital audio-visual work means a series of related images which, when shown in succession, imparts an impression of motion, together with accompanying sounds, if any.

  • Digital audio-visual works which means a series of related images which, when shown in succession, impart an impression of motion, together with accompanying sounds, if any;

  • Certified cabinet x-ray system means an x-ray system that has been certified in accordance with 21 CFR 1010.2 as being manufactured and assembled pursuant to the provisions of 21 CFR 1020.40.

  • Initial Environmental Examination or “IEE” means the initial environmental examination for the Project, including any update thereto, prepared and submitted by the Borrower and cleared by ADB;

  • Generation Interconnection Feasibility Study means a study conducted by the Transmission Provider (in coordination with the affected Transmission Owner(s)) in accordance with Tariff, Part IV, section 36.2.

  • Non-Participating Certified Clinical Nurse Specialist means a Certified Clinical Nurse Specialist who does not have a written agreement with the Claim Administrator or another Blue Cross and/or Blue Shield Plan to provide services to you at the time services are rendered.

  • Backflow prevention device means a safety device used to prevent pollution or contamination of the water supply due to the reverse flow of water from the irrigation system.

  • Interconnection Feasibility Study means either a Generation Interconnection Feasibility Study or Transmission Interconnection Feasibility Study.

  • Participating Certified Clinical Nurse Specialist means a Certified Clinical Nurse Specialist who has a written agreement with the Claim Administrator or another Blue Cross and/or Blue Shield Plan to provide services to you at the time services are rendered.

  • Pivotal Clinical Trial means a pivotal human clinical trial of a Licensed Product with a defined dose or a set of defined doses of such Licensed Product designed to ascertain efficacy and safety of such Licensed Product for the purpose of enabling the preparation and submission of an MAA to the competent Regulatory Authorities in a country of the Territory, as further defined in 21 C.F.R. § 312.21(c) for the U.S., as amended from time to time, or the corresponding foreign regulations.

  • Cardiopulmonary resuscitation or "CPR" means artificial ventilation or external

  • Systems Engineering means preparing specifications, identifying and resolving interface problems, developing test requirements, evaluating test data, and supervising design.

  • Permanent radiographic installation means an enclosed shielded room, cell, or vault, not located at a temporary jobsite, in which radiography is performed.

  • Three-dimensional reference system means a system as described in Appendix 2 to this annex;

  • Stationary beam radiation therapy means radiation therapy without displacement of one or more mechanical axes relative to the patient during irradiation.

  • Study means the investigation to be conducted in accordance with the Protocol.

  • Clinical means having a significant relationship, whether real or potential, direct or indirect, to the actual rendering or outcome of dental care, the practice of dentistry, or the quality of dental care being rendered to a patient;

  • Phase I Clinical Study means, as to a particular Licensed Product, an initial clinical study in humans with the purpose of assessing the Licensed Product’s safety, tolerability, toxicity, pharmacokinetics or other pharmacological properties.

  • Cannabis testing facility means an entity registered by

  • Clinical experience means providing direct services to individuals with mental illness or the provision of direct geriatric services or special education services. Experience may include supervised internships, practicums, and field experience.

  • Treatability study means a study in which a hazardous waste is subjected to a treatment process to determine: (1) Whether the waste is amenable to the treatment process, (2) what pretreatment (if any) is required, (3) the optimal process conditions needed to achieve the desired treatment, (4) the efficiency of a treatment process for a specific waste or wastes, or (5) the characteristics and volumes of residuals from a particular treatment process. Also included in this definition for the purpose of the § 261.4 (e) and (f) exemptions are liner compatibility, corrosion, and other material compatibility studies and toxicological and health effects studies. A “treatability study” is not a means to commercially treat or dispose of hazardous waste.