Slag tap definition

Slag tap means the pouring hole through which slag is removed from a kettle or furnace.

Examples of Slag tap in a sentence

  • Slag tap firing systems have somewhat higher NOX emission factors, in keeping with the nature of their combustion technology.

  • These cases are explained in the section3.1.3. Table 3.2 shows the physical properties of the matte and slag.Table 3.1. Settler dimensionsSettler Dimensions/ Radius (m)Position on x,y,z coordinates (m)Length (along z axis) 18 Width (along x axis) 6 Height (along y axis)Centre line0.87 In Sides0.70 Slag tap hole 0.0450.55, 0.35, 18Matte tap hole 0.0450.55, -0.1, 0Slag/matte Inlet 2.250, 0, 3.75 Table3.

Related to Slag tap

  • MSAA Indicator Technical Specifications document means, as the context requires, either or both of the document entitled “Multi-Sector Service Accountability Agreement (MSAA) 2019-20 Indicator Technical Specifications November 5, 2018 Version 1.3” and the document entitled “Multi-Sector Service Accountability Agreement (MSAA) 2019-20 Target and Corridor-Setting Guidelines” as they may be amended or replaced from time to time;

  • Dynamic driving task means the same as that term is defined in Section 41-26-102.1.

  • Ultra Low Sulfur Diesel Fuel means diesel fuel that has a sulfur content of no more than fifteen parts per million.

  • Backflow Prevention Assembly means any mechanical assembly installed at a water service line or at a plumbing fixture to prevent a backflow contamination event, provided that the mechanical assembly is appropriate for the identified contaminant at the cross connection and is an in-line field-testable assembly.

  • Double Phase Aerosol Air Freshener means an aerosol air freshener with the liquid contents in two or more distinct phases that requires the product container be shaken before use to mix the phases, producing an emulsion.

  • Supplier of water means any person who owns or operates a public water system.

  • Pneumatic tire means every tire in which compressed air is designed to support the load.

  • Loose-fitting facepiece means a respiratory inlet covering that is designed to form a partial seal with the face.

  • Backflow prevention device means a safety device used to prevent pollution or contamination of the water supply due to the reverse flow of water from the irrigation system.

  • Rubbing alcohol means any product containing isopropyl alcohol (also called isopropanol) or denatured ethanol and labeled for topical use, usually to decrease germs in minor cuts and scrapes, to relieve minor muscle aches, as a rubefacient, and for massage.

  • Diatomaceous earth filtration means a process resulting in substantial particulate removal in which (1) a precoat cake of diatomaceous earth filter media is deposited on a support membrane (septum), and (2) while the water is filtered by passing through the cake on the septum, additional filter media known as body feed is continuously added to the feed water to maintain the permeability of the filter cake.

  • Ambient air means that portion of the atmosphere, external to buildings, to which the general public has access.

  • Tight-fitting facepiece means a respiratory inlet covering that forms a complete seal with the face.

  • Nuclear reactor means any apparatus designed or used to sustain nuclear fission in a self-supporting chain reaction or to contain a critical mass of fissionable material.

  • HEPA filter means high-efficiency particulate air filters that are rated to achieve a minimum initial particle-removal efficiency of 99.97 per cent using ASTM F 1471– 93 or equivalent standard;

  • National Ambient Air Quality Standards or “NAAQS” means national ambient air quality standards that are promulgated pursuant to Section 109 of the Act, 42 U.S.C. § 7409.

  • Snow tyre means a tyre whose tread pattern, tread compound or structure is primarily designed to achieve in snow conditions a performance better than that of a normal tyre with regard to its ability to initiate or maintain vehicle motion;

  • Stormwater Pollution Prevention Plan or "SWPPP" means a document that is prepared in accordance with good engineering practices and that identifies potential sources of pollutants that may reasonably be expected to affect the quality of stormwater discharges from the construction site, and otherwise meets the requirements of this Ordinance. In addition the document shall identify and require the implementation of control measures, and shall include, but not be limited to the inclusion of, or the incorporation by reference of, an approved erosion and sediment control plan, an approved stormwater management plan, and a pollution prevention plan.

  • Cold Weather Alert means the notice that PJM provides to PJM Members, Transmission Owners, resource owners and operators, customers, and regulators to prepare personnel and facilities for expected extreme cold weather conditions.

  • Double check valve assembly means an assembly composed of two single, independently acting, check valves including tightly closing shutoff valves located at each end of the assembly and suitable connections for testing the water tightness of each check valve.

  • coronavirus means severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2);

  • Participating Marriage and Family Therapist means a Marriage and Family Therapist who has a written agreement with the Claim Administrator or another Blue Cross and/or Blue Shield Plan to provide services to you at the time services are rendered.

  • polygamous marriage means any marriage to which paragraph 5 applies;

  • CDBG-DR means Community Development Block Grant Disaster Recovery.

  • COVID-19 Pandemic means the epidemic, pandemic or disease outbreak associated with COVID-19.

  • Non-Participating Certified Clinical Nurse Specialist means a Certified Clinical Nurse Specialist who does not have a written agreement with the Claim Administrator or another Blue Cross and/or Blue Shield Plan to provide services to you at the time services are rendered.