Slip Resistant definition

Slip Resistant means a surface that has been treated or constructed so as to

Slip Resistant means having a textured surface which is not conducive to slipping under contact of bare feet unlike glazed tile or masonry terrazzo and nontextured plastic materials. manufactured surface products shall be designated by the manufacturer as suitable for walking surfaces in wet areas.

Slip Resistant means a surface that has a static coefficient of friction (wet or dry) of at least 0.50.

Examples of Slip Resistant in a sentence

• The Access Board's advisory guidelines on Slip Resistant Surfaces, available from the Board at no cost, provides additional information on this subject.

• The Contractor shall install Government-furnished slip resistant sheets; seal per the arrangement shown on Coast Guard Drawing 87 WPB 634-001 as specified for “Weather Deck Slip Resistant Sheets, Option I, Steel” in SFLC Std Spec 6310, Appendix A (Cutter and Boat Exterior Paint Systems).

• Apply beads at a minimum rate of 0.5 kg/l (5 lbs/g) to a white and/or yellow latex or alkyd zone / traffic marking paint of approved type as listed in the MPI Repainting Manual.] .8 [Slip Resistant Additives (SRA): rubber aggregate or clean / washed silica sand for use with or as a component part of paint (usually floor / porch / stair enamel) on exterior horizontal surfaces as required to provide slip resistance.

• Slip Resistant Floor covering: Minimum 2mm (.08 inches) thick and shall in either wet or dry conditions provide a coefficient of friction that is greater than or equal to .8.

• Apply beads at a minimum rate of 0.5 kg/l (5 lbs/g) to a white and/or yellow latex or alkyd zone / traffic marking paint of approved type as listed in the MPI Repainting Manual.] .8 [Slip Resistant Additives (SRA): rubber aggregate, clean / washed silica sand or ground walnut chips for use with or as a component part of paint (usually floor / porch / stair enamel) on interior horizontal surfaces as required to provide slip resistance.

More Definitions of Slip Resistant

Slip Resistant means not conducive to slipping under contact with bare feet when wet.

Slip Resistant means a surface that has been treated or constructed so as to significantly reduce the chance of a patron slipping. The surface shall not be an abrasion

Slip Resistant means a surface that has been treated or constructed so as to significantly reduce the chance of a patron slipping. The surface shall not be an abrasion hazard. All surfaces required to be slip-resistant shall have a minimum dynamic coefficient of friction at least equal to the requirements of ANSI A137.1-2012 or successor standard for that installation as measured by the DCOF AcuTest.

Slip Resistant means surfaces shall have a minimum dynamic coefficient of friction at least equal to the requirements of ANSI A137.1-2012 for that installation as measured by the DCOF AcuTest.

Slip Resistant means a surface that has been so treated or constructed as to significantly reduce the chance of a bather slipping. The surface should not be an abrasion hazard.

Slip Resistant means a surface which has been treated or textured to significantly reduce the chance of a bather slipping in wet conditions.

Slip Resistant means a textured surface that is neither conducive to slipping when wet nor abrasive to bare feet and has a minimum static coefficient of friction of 0.6 (measured by an approved method).