Standard Plates definition

Standard Plates means general drawings having or showing similar characteristics or qualities that are representative of a construction practice or activity.
Standard Plates means general drawings showing a common or repeated construction activity or practice.

Examples of Standard Plates in a sentence

  • MnDOT Standard Plates used on this project will also be listed on this sheet.

  • The shaped concrete fill invert for all manhole types shall be a Power Flow according to Public Works Standard Plates and extend up to two thirds of the diameter of the connecting pipe.

  • This work consists of installing metered or unmetered electric service in accordance with the Special Provisions, these Specifications, the applicable Standard Plates, and the details shown on the plans.

  • W Beam to 3 Cable Transition Bracket shall include all costs incurred for removing the damaged transition bracket and installing a transition bracket in accordance with the details on Standard Plates 629.05 & 629.15.

  • Light pole bases and anchor rods shall be in accordance with City of Minneapolis Standard Plates.

  • A four (4) inch thick concrete encasement shall be placed around the outside of the manhole or catch basin adjusting rings as detailed in current Public Works Standard Plates.

  • Mortar shall be applied to the outside of the casting between casting and structure as well as around any adjusting rings according to Public Works Standard Plates.

  • The cleanout shall be constructed as shown on the Standard Plates.

  • The virtual tutor should be able to take disciplinary actions such as removing a griefer from the classroom.

  • Based on the 2012 CEQR Technical Manual water consumption rates, the projected development sites have an estimated water demand of just under approximately 35,046 gpd in existing conditions (refer to Table 9- 1).

Related to Standard Plates

  • Standard Plan means the insurance plan with terms and conditions and the benefit schedule equivalent to the minimum compliant product requirements of VHIS, which are from time to time published and subject to regular review by the Government.

  • Standard Materials means all Materials not specified as Custom Materials.

  • Standard Provisions mean these Standard Provisions that form a part of the Certificate of Designations relating to the Designated Preferred Stock.

  • Standard fertility preservation services means procedure based upon current evidence-based standards of care established by the American Society for Reproductive Medicine, the American Society for Clinical Oncology, or other national medical associations that follow current evidence-based standards of care.

  • Standard Interface means an interface that either is an official standard defined by a recognized standards body, or, in the case of interfaces specified for a particular programming language, one that is widely used among developers working in that language.

  • Standard Software means Software identified as such in Appendix 4 of the Contract Agreement and such other Software as the parties may agree in writing to be Standard Software.

  • Standard Premium means the basic premium for the coverage under this Certified Plan, as charged by the Company to the Policy Holder on an overall Portfolio basis, which may be adjusted in accordance with the Age, gender and/or lifestyle factors of the Insured Person.

  • standard scale means the standard scale contained in section 55 of the Interpretation Act 2015 (of Tynwald)33;

  • Standard Services means the standard Services referred to in Schedule 1 (Services) of this Framework Agreement;

  • Standard equipment means the basic configuration of a vehicle which is equipped with all the features that are required under the regulatory acts of the Contracting Party including all features that are fitted without giving rise to any further specifications on configuration or equipment level.

  • Evaluation and treatment facility means any facility which

  • Standard Usage Information means the usage data that is made generally available by the gas utility to all similarly situated Customers on a regular basis, delivered by the gas utility in a standard format.

  • Systems Engineering means preparing specifications, identifying and resolving interface problems, developing test requirements, evaluating test data, and supervising design.

  • Building materials means such commodities or articles as are specified by the Administrator by notification to be building materials for the purposes of this Act;

  • New Jersey Stormwater Best Management Practices (BMP) Manual or “BMP Manual” means the manual maintained by the Department providing, in part, design specifications, removal rates, calculation methods, and soil testing procedures approved by the Department as being capable of contributing to the achievement of the stormwater management standards specified in this chapter. The BMP Manual is periodically amended by the Department as necessary to provide design specifications on additional best management practices and new information on already included practices reflecting the best available current information regarding the particular practice and the Department’s determination as to the ability of that best management practice to contribute to compliance with the standards contained in this chapter. Alternative stormwater management measures, removal rates, or calculation methods may be utilized, subject to any limitations specified in this chapter, provided the design engineer demonstrates to the municipality, in accordance with Section IV.F. of this ordinance and N.J.A.C. 7:8-5.2(g), that the proposed measure and its design will contribute to achievement of the design and performance standards established by this chapter.

  • Standard Methods for the Examination of Water and Wastewater means the most recent edition of Standard Methods for the Examination of Water and Wastewater published jointly by the American Public Health Association, the American Waterworks Association and the Water Environment Federation;

  • Broadband Services means Verizon's Fios or DSL-based Internet services (whichever applies). Verizon's DSL-based Internet service is also known as "High Speed Internet" ("HSI").

  • Standard Agreement Coversheet refers to the form used by the Judicial Council to enter into agreements with other parties. Several originally signed, fully executed versions of the Standard Agreement, together with the integrated Contract Documents, shall each represent the Agreement as an individual contract counterpart.

  • Standard Specifications means a compilation in book form of specifica- tions approved for general application and repetitive use;

  • Supplementary aids and services means aids, services and other supports that are provided in regular education classes or other education-related settings and in extracurricular and nonacademic settings to enable children with disabilities to be educated with children without disabilities to the maximum extent appropriate.

  • Structural Term Sheet shall have the respective meanings assigned to them in the February 13, 1995 letter (the "PSA Letter") of Cleary, Gottlieb, Steex & Xamixxxx xx behalf of the Public Securities Association (which letter, and the SEC staff's response thereto, were publicly available February 17, 1995). The term "Collateral term sheet" as used herein includes any subsequent Collateral term sheet that reflects a substantive change in the information presented. The term "Computational Materials" has the meaning assigned to it in the May 17, 1994 letter (the "Kiddxx xxxter" and together with the PSA Letter, the "No-Action Letters") of Browx & Xood xx behalf of Kiddxx, Xxabody & Co., Inc. (which letter, and the SEC staff's response thereto, were publicly available May 20, 1994).

  • Standard Amendment Coversheet refers to the form used by the Judicial Council to amend agreements with other parties. Several originally signed, fully executed versions of a Standard Amendment, together with the integrated Contract Documents, shall each represent an Amendment as an individual contract counterpart.

  • Fraud Monitoring System means an off-line administration system that monitors suspected occurrences of ABT- related fraud.

  • Standard reference compendia means the American Medical Association Drug Evaluations, the

  • Large Facility Interconnection Procedures or “LFIP”) shall mean the interconnection procedures applicable to an Interconnection Request pertaining to a Large Generating Facility that are included in Attachment X of the NYISO OATT. Standard Large Generator Interconnection Agreement (“LGIA”) shall mean this Agreement, the form of interconnection agreement applicable to an Interconnection Request pertaining to a Large Generating Facility, that is included in Attachment X of the NYISO OATT. System Deliverability Upgrades shall mean the least costly configuration of commercially available components of electrical equipment that can be used, consistent with Good Utility Practice and Applicable Reliability Requirements, to make the modifications or additions to Byways and Highways and Other Interfaces on the existing New York State Transmission System and Distribution System that are required for the proposed project to connect reliably to the system in a manner that meets the NYISO Deliverability Interconnection Standard at the requested level of Capacity Resource Interconnection Service. System Protection Facilities shall mean the equipment, including necessary protection signal communications equipment, required to (1) protect the New York State Transmission System from faults or other electrical disturbances occurring at the Large Generating Facility and (2) protect the Large Generating Facility from faults or other electrical system disturbances occurring on the New York State Transmission System or on other delivery systems or other generating systems to which the New York State Transmission System is directly connected. System Upgrade Facilities shall mean the least costly configuration of commercially available components of electrical equipment that can be used, consistent with Good Utility Practice and Applicable Reliability Requirements, to make the modifications to the existing transmission system that are required to maintain system reliability due to: (i) changes in the system, including such changes as load growth and changes in load pattern, to be addressed in the form of generic generation or transmission projects; and (ii) proposed interconnections. In the case of proposed interconnection projects, System Upgrade Facilities are the modifications or additions to the existing New York State Transmission System that are required for the proposed project to connect reliably to the system in a manner that meets the NYISO Minimum Interconnection Standard. Tariff shall mean the NYISO Open Access Transmission Tariff (“OATT”), as filed with the Commission, and as amended or supplemented from time to time, or any successor tariff. Trial Operation shall mean the period during which Developer is engaged in on-site test operations and commissioning of the Large Generating Facility prior to Commercial Operation.

  • Structural Engineer means the Engineer appointed or to be appointed from time to time by Promoter for the preparation of the structural design and drawings of the buildings .