Surface cleaning definition

Surface cleaning means any activity except dry cleaning using organic solvents to remove contamination from the surface of material, including degreasing; a cleaning activity consisting of more than one step before or after any other processing step is considered as one surface-cleaning activity. The activity refers to the cleaning of the surface of products and not to the cleaning of process equipment;
Surface cleaning means any process except dry cleaning using organic solvents to remove contamination from the surface of material, including degreasing; a cleaning process consisting of more than one step before or after any other processing step is considered as one surface-cleaning process. The process refers to the cleaning of the surface of products and not to the cleaning of process equipment;
Surface cleaning means any activity, except dry cleaning, using organic solvents to remove contamination from the surface of material including degreasing but excluding the cleaning of equipment; and a cleaning activity consisting of more than one step before or after any other activity shall be considered as one surface cleaning activity;

Examples of Surface cleaning in a sentence

  • Surface cleaning and preparation work shall be performed only in the area of the epoxy markings application.

  • Surface cleaning and elaborate access procedures may be required.

  • Surface cleaning and removal of detachable cowlings, panels, covers and fabric may be required to be able to satisfy the inspection requirements.

  • Surface cleaning must meet requirements of SSPC SP 10/NACE No. 2.

  • The remedies provided in this Note shall be cumulative and in addition to all other remedies available under this Note, at law or in equity (including a decree of specific performance and/or other injunctive relief), and nothing herein shall limit the Holder's right to pursue actual damages for any failure by the Corporation to comply with the terms of this Note.

  • Topical and social profiling go together and form a complete picture.

  • Surface cleaning or scabbling to remove the surface of the concrete to a non-contaminated layer will be carried out.

  • Surface cleaning and elaborate access procedures may be required.Electrical Wiring Interconnection System (EWIS): See CS 25.1701.Functional Failure: Failure of an item to perform its intended function within specified limits.General Visual Inspection (GVI): A visual examination of an interior or exterior area, installation or assembly to detect obvious damage, failure or irregularity.

  • Surface cleaning includes mirrors, display cases, desktops, doors, trim and glass entrances.

  • Reference was also made to guidelines issued by the Agency for Surface cleaning using solvents.


More Definitions of Surface cleaning

Surface cleaning means any activity except dry cleaning using organic solvents to remove contamination from the surface of material, including degreasing; a cleaning activity consisting of more than one step before or after any other processing step is
Surface cleaning means any process except dry cleaning using organic solvents to remove contamination from the surface of material, including degreasing; a cleaning process consisting of more than one step before or after any other processing step is considered as one

Related to Surface cleaning

  • Surface water means all water which is open to the atmosphere and subject to surface runoff.

  • Surface waters means all waters of the state as defined in G.S. 143-212 except underground waters

  • Cleaning means the act of removing septage or other wastes from a wastewater treatment system component or grease/waste from a grease interceptor.

  • Soil means all unconsolidated mineral and organic material of any origin.

  • Dry cleaning fluid means any non-aqueous liquid product designed and labeled exclusively for use on: fabrics which are labeled "for dry clean only", such as clothing or drapery; or S-coded fabrics. Dry cleaning fluid includes, but is not limited to, those products used by commercial dry cleaners and commercial businesses that clean fabrics such as draperies at the customer's residence or work place. Dry cleaning fluid does not include spot remover or carpet and upholstery cleaner. For the purposes of this definition, S-coded fabric means an upholstery fabric designed to be cleaned only with water-free spot cleaning products as specified by the Joint Industry Fabric Standards Committee.

  • Drainage area means a geographic area within which stormwater, sediments, or dissolved materials drain to a particular receiving waterbody or to a particular point along a receiving waterbody.

  • Tank means an enclosed space which is formed by the permanent structure of a ship and which is designed for the carriage of liquid in bulk.

  • Cleaner means an employee engaged in cutting or trimming off loose ends of cotton or cloth left on garments or parts of garments by previous operators;

  • drainage work means any watercourse and includes any land which is expected to provide flood storage capacity for any watercourse and any bank, wall, embankment or other structure, or any appliance, constructed or used for land drainage or flood defence;

  • Green building strategies means those strategies that minimize the impact of development on the environment, and enhance the health, safety and well-being of residents by producing durable, low-maintenance, resource-efficient housing while making optimum use of existing infrastructure and community services.

  • Excavation means the mechanical removal of earth material.

  • Gravel means stone screened from river sand or quarried and washed free of clay and clay coatings. Concrete aggregate designated as Class II by the department of transportation is acceptable.

  • Water surface elevation means the height, in relation to the National Geodetic Vertical Datum (NGVD) of 1929, the North American Vertical Datum (NAVD) of 1988, or other datum, where specified, of floods of various magnitudes and frequencies in the floodplains of riverine areas.

  • Subsurface Borings and Testing means borings, probings and subsurface explorations, laboratory tests and inspections of samples, materials and equipment; appropriate professional interpretations of all the foregoing.

  • Topsoil means a varying depth (up to 300 mm) of the soil profile irrespective of the fertility, appearance, structure, agricultural potential, fertility and composition of the soil;

  • Slug loading means any pollutant, including oxygen demanding pollutants, released in a discharge at a flow rate and/or pollutant concentration as to cause interference in the POTW.

  • borehole means a hole sunk into the earth for the purpose of locating, abstracting or using subterranean water and includes a spring;

  • Pipelines has the meaning set forth in the Recitals.

  • Outbuilding means and refer to structures such as (by way of example and not limitation) storage buildings, sheds, greenhouses, gazebos and other Roofed Structures.

  • Tanks has the meaning set forth in Section 4.12(b).

  • Drainage means the movement of water to a place of disposal, whether by way of the natural characteristics of the ground surface or by artificial means;

  • Reservoir means a water impoundment project operated by the United States Army Corps of Engineers that is intended to retain water or delay the runoff of water in a designated surface area of land.

  • Loading Zone means a parking stall which is set aside for use by commercial vehicles if there is a sign referable to that stall marked ‘Loading Zone’;

  • Surface impoundment or "impoundment" means a facility or part of a facility which is a natural topographic depression, man-made excavation, or diked area formed primarily of earthen materials (although it may be lined with man-made materials), which is designed to hold an accumulation of liquid wastes or wastes containing free liquids, and which is not an injection well. Examples of surface impoundments are holding, storage, settling, and aeration pits, ponds, and lagoons.

  • Infiltrative surface means designated interface where effluent moves from distribution media or a distribution product into treatment media or original soil. In standard trench or bed systems this will be the interface of the distribution media or product and in-situ soil. Two separate infiltrative surfaces will exist in a mound system and an unlined sand filter, one at the interface of the distribution media and fill sand, the other at the interface of the fill sand and in-situ soil.

  • Mine drainage means any drainage, and any water pumped or siphoned, from an active mining area or a post-mining area. The abbreviation “ml/l” means milliliters per liter.