Technical Approach definition

Technical Approach means the portion of the Technical Proposal providing the
Sample 1Sample 2Sample 3
Technical Approach. The modeling and the assumptions used in the modeling to support this PA are described in detail in the accompanying Technical Support Document (TSD). In general, a worst-case modeling approach was applied following EPA guidance. In all cases EPA’s XXXXX0000x emission model was used to generate emission estimates and CAL3QHC (version 04244) was used for the dispersion analysis. EPA’s current guidance for modeling CO Hot-Spots (Guideline for Modeling Carbon Monoxide from Roadway Intersections, U. S. EPA, EPA-454/R- 92-005, November 1992) was also applied. The assumptions and inputs used in the model were worst-case or highly conservative, leading to higher emission estimates and less dispersion (that is, greater forecast ambient concentrations) than would be expected under real-world conditions. Consequently, if a project does not cause a modeled exceedance of the NAAQS with these worst-case or conservative inputs and assumptions, then it may be stated with high confidence that an exceedance under real-world conditions would not be expected. Finally, STATE DOT consulted with the STATE AIR AGENCY to determine appropriate values for CO background concentrations and persistence factor. These values were used to arrive at an 8- hour total CO concentration for comparison with the 8-hour CO ambient air quality standard.
Sample 1
Technical Approach. The modeling conducted in support of this PA is described in detail in the accompanying TSD. In general, a worst-case modeling approach was applied following EPA
Sample 1

Examples of Technical Approach in a sentence

  • Technical Approach - Description of the proposed services which meets or exceeds the stated technical specifications or scope of work.

  • Final selection will be determined by carrying the scores from Phase I forward for each Finalist and by evaluating the Technical Approach and Past Performance criteria for Phase II.

  • Summarize the key features of your Proposal and the Technical Approach to be used.

  • The Selection Committee will evaluate the shortlisted firms (Finalists) on their Technical Approach, which shall account for a total of forty (40%) percent.

  • Any additional detailed Technical Approach instructions and requirements, beyond that provided in Section V.

  • All members of the Selection Committee will review the Technical Approach (and will attend the presentation/interview if so chosen).

  • Each finalist firm shall be notified in writing and informed of the Technical Approach due date.

  • The proposal should describe how the proposed team members have the necessary experience and capabilities to carry out the Technical Approach.

  • Instructions for Preparing Technical Approach and Past Performance Response - Phase II Response.

  • Firms selected and shortlisted as finalists will receive notification and final instructions from GDOT regarding thePhase II – Technical Approach response.


More Definitions of Technical Approach

Technical Approach means the portion of the Technical Proposal providing the information requested in Section 4.1 of Exhibit 2 to the ITP.
Sample 1
Technical Approach means the Vendor’s proposed technical tolling solution as described in the Proposal.
Sample 1
Technical Approach. A description of the plan for completing the goals of a project ToC- Theory of Change: The process by which a long term goal is achieved. USAID- United States Agency for International Development W4H- WASH for Health – 5 year WASH program funded by USAID starting this year in Ghana WASH- Water Sanitation and Hygiene
Sample 1
Technical Approach. We understand that it is essential for equity applicants to have general business knowledge for success especially, during uncertain times such as these it's imperative to stay connected and grow. Our technical approach is to deliver quality content in a virtual environment that is easy for applicants to understand, access and learn. We do this in the following ways: Online Courses: We use a secured Learning Management System for effective training. This is method of self-paced learning allows participants to watch videos, read text, complete exercises, complete assignments and take quizzes to encourage their interaction with the material in order to increase learning and comprehension. Our courses typically take 7-10 hours to complete from start to finish.
Sample 1

Related to Technical Approach

  • Technical Support Services means the technical support and maintenance Services provided by us according to our then-current technical support policy and procedure listed at xxxxxxxxxxxxx.xxx (“Technical Support Policy”) when the Services are purchased.

  • Technical safeguards means the technology and the policy and procedures for its use that 27 protect electronic PHI and control access to it.

  • Non-Microsoft Product means any third-party-branded software, data, service, website or product, unless incorporated by Microsoft in a Product.

  • Technical Specifications A specification in a document defining the characteristics of a product or a service, such as the quality levels, the environmental and climate performance levels, the design for all needs, including accessibility for people with disabilities, and the evaluation of conformity, of product performance, of the use of the product, safety or dimensions, as well as requirements applicable to the product as regards the name by which it is sold, terminology, symbols, testing and test methods, packaging, marking or labelling, instructions for use, the production processes and methods at every stage in the life cycle of the supply or service, as well as the evaluation and conformity procedures;

  • Manufacturing Process means any process for—

  • Manufacturing Facilities means facilities engaged in the mechanical or chemical transformation of materials or substances into new products and shall include:

  • Manufacturing operation means a process in which materials are changed, converted, or transformed into a different state or form from which they previously existed and includes refining materials, assembling parts, and preparing raw materials and parts by mixing, measuring, blending, or otherwise committing such materials or parts to the manufacturing process. "Manufacturing operation" does not include packaging.

  • Practical application means to manufacture in the case of a composition or product, to practice in the case of a process or method, or to operate in the case of a machine or system; and, in each case, under such conditions as to establish that the invention is being utilized and that its benefits are, to the extent permitted by law or government regulations, available to the public on reasonable terms.

  • technical specification means a document that prescribes technical requirements to be fulfilled by a product, process or service;

  • MSAA Indicator Technical Specifications document means, as the context requires, either or both of the document entitled “Multi-Sector Service Accountability Agreement (MSAA) 2019-20 Indicator Technical Specifications November 5, 2018 Version 1.3” and the document entitled “Multi-Sector Service Accountability Agreement (MSAA) 2019-20 Target and Corridor-Setting Guidelines” as they may be amended or replaced from time to time;

  • Maintenance Programme shall have the meaning set forth in Clause 14.3; “Maintenance Period” shall have the meaning set forth in Clause 14.1; “Maintenance Requirements” shall have the meaning set forth in Clause 14.2;

  • Technical Proposal means the Contractor’s Technical Proposal dated (Technical Proposal date).

  • TO Technical Proposal means the TO Contractor’s technical response to the CATS+ TORFP dated date of TO Technical Proposal.

  • Technical data means recorded information, regardless of the form or method of the recording, of a scientific or technical nature (including computer software documentation). The term does not include computer software or data incidental to contract administration, such as financial and/or management information.

  • Third Party Components means software and interfaces, licensed by RIM from a third party for incorporation into a RIM software product, or for incorporation into firmware in the case of RIM hardware products, and distributed as an integral part of that RIM product under a RIM brand, but shall not include Third Party Software.

  • Manufacturing Services means the manufacturing, quality control, quality assurance, stability testing, packaging, and related services, as set forth in this Agreement, required to manufacture Product or Products using the Active Materials, Components, and Xxxx Back Items;

  • Manufacturing Facility means buildings and structures, including machinery and equipment, the primary purpose of which is or will be the manufacture of tangible goods or materials or the processing of such goods or materials by physical or chemical change.

  • TO Proposal - Technical means the TO Contractor’s technical response to the CATS II TORFP dateddate of TO Proposal – Technical.

  • Clinical nurse specialist means a registered nurse with relevant post-basic qualifications and 12 months’ experience working in the clinical area of his/her specified post-basic qualification, or a minimum of four years’ post-basic registration experience, including three years’ experience in the relevant specialist field and who satisfies the local criteria.

  • Supplier Background IPR means Intellectual Property Rights owned by the Supplier before the Call Off Commencement Date, for example those subsisting in the Supplier's standard development tools, program components or standard code used in computer programming or in physical or electronic media containing the Supplier's Know-How or generic business methodologies; and/or Intellectual Property Rights created by the Supplier independently of this Call Off Contract,

  • Technical Bid means the bid submitted online through the electronic bidding platform, containing the documents as listed out in Clause 2.5.2 of this RFP;

  • Development Activities means those activities which are normally undertaken for the development, construction, repair, renovation, rehabilitation or conversion of buildings for residential purposes, including the acquisition of property;

  • QA means Quality Assurance.

  • Support Services means support in relation to the use of, and the identification and resolution of errors in, the Hosted Services, but shall not include the provision of training services;

  • Manufacturing Site means the facilities where a Compound is Manufactured by or on behalf of a Party, as such Manufacturing Site may change from time to time in accordance with Section 8.7.

  • Clinical evaluation means a systematic and planned process to continuously generate, collect, analyse and assess the clinical data pertaining to a device in order to verify the safety and performance, including clinical benefits, of the device when used as intended by the manufacturer;