Temperature and humidity definition

Temperature and humidity means temperature and humidity maintained in the following ranges:
Sample 1Sample 2Sample 3

Examples of Temperature and humidity in a sentence

  • The pharmacy shall be properly lighted and ventilated.8.5(6) Temperature and humidity.

  • Temperature and humidity controls shall be available wherever necessary during testing of samples.

  • Temperature and humidity changes will cause the rubber to expand or contract.

  • Temperature and humidity shall be maintained within the ranges required by the manufactures instructions.

  • Temperature and humidity profiles of broiler houses with experimental conventional and tunnel ventilation systems.

  • Temperature and humidity controls shall be made available wherever necessary during the testing of samples.

  • Measurement of daily Temperature and humidity data using calibrated data loggers and weighing scales within the warehouse environment.

  • The Supplier shall indicate in detail the fail-safe procedure(s) in case of the following: ➢ Power failure ➢ Voltage variation ➢ Frequency variation ➢ Temperature and humidity variations.

  • Temperature and humidity recommendations are set by the American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE) and are based on comfort of the occupants as opposed to health risk.

  • Temperature and humidity sensors shall be calibrated for the ranges of temperature and humidity expected during the test and shall be capable of measuring with enough accuracy to ensure the tolerances in the procedure are satisfied.

Related to Temperature and humidity

  • High-temperature coating means a high performance coating labeled and formulated for application to substrates exposed continuously or intermittently to temperatures above 204oC (400oF).

  • Pressure means relative pressure versus atmospheric pressure, unless otherwise stated.

  • Meters shall have the meaning set forth in Section 4.6(a) hereof.

  • Finished water means the water that is introduced into the distribution system of a public water system and is intended for distribution and consumption without further treatment, except as treatment necessary to maintain water quality in the distribution system (e.g., booster disinfection, addition of corrosion control chemicals).

  • Topsoil means a varying depth (up to 300 mm) of the soil profile irrespective of the fertility, appearance, structure, agricultural potential, fertility and composition of the soil;

  • Unpolluted water means water of quality equal to or better than the effluent criteria in effect or water that would not cause violation of receiving water quality standards and would not be benefited by discharge to the sanitary sewers and wastewater treatment facilities provided.

  • Operating pressure means the pressure at which the parts of an irrigation system are designed by the manufacturer to operate.

  • Surface water means all water which is open to the atmosphere and subject to surface runoff.

  • Calibration means the determination of (1) the response or reading of an instrument relative to a series of known radiation values over the range of the instrument, or (2) the strength of a source of radiation relative to a standard.

  • Atmosphere means the air that envelops or surrounds the earth and includes all space outside of buildings, stacks or exterior ducts.

  • Diatomaceous earth filtration means a process resulting in substantial particulate removal in which (1) a precoat cake of diatomaceous earth filter media is deposited on a support membrane (septum), and (2) while the water is filtered by passing through the cake on the septum, additional filter media known as body feed is continuously added to the feed water to maintain the permeability of the filter cake.

  • Surface waters means all waters of the state as defined in G.S. 143-212 except underground waters

  • Ventilation means the supply of outside air into a building through window or other openings due to wind outside and convection effects arising from temperature, or vapour pressure differences (or both) between inside and outside of the building;

  • Standard Methods for the Examination of Water and Wastewater means the most recent edition of Standard Methods for the Examination of Water and Wastewater published jointly by the American Public Health Association, the American Waterworks Association and the Water Environment Federation;

  • Emission control system means the electronic engine management controller and any emission related component in the exhaust or evaporative system which supplies an input to or receives an output from this controller.

  • Direct scattered radiation means that scattered radiation which has been deviated in direction only by materials irradiated by the useful beam (See "Scattered radiation").

  • Noise means two times the root mean square of ten standard deviations, each calculated from the zero responses measured at a constant frequency which is a multiple of 1,0 Hz during a period of 30 seconds.

  • Sanitary with respect to a building, means it is free from danger or hazard to the health of persons occupying or frequenting it or to that of the public, if such danger arises from the method or materials of its construction or from any equipment installed therein, for the purpose of lighting, heating, ventilating, or plumbing.

  • Radiation area means any area, accessible to individuals, in which radiation levels could result in an individual receiving a dose equivalent in excess of 0.05 mSv (0.005 rem) in 1 hour at 30 centimeters from the source of radiation or from any surface that the radiation penetrates.

  • Calibration gas means a gas mixture used to calibrate gas analysers.

  • Scattered radiation means ionizing radiation emitted by interaction of ionizing radiation with matter, the interaction being accompanied by a change in direction of the radiation. Scattered primary radiation means that scattered radiation which has been deviated in direction only by materials irradiated by the useful beam.

  • Pests means Birds, Vermin and Insects.

  • Recalibration means the adjustment of all DRG weights to reflect changes in relative resource consumption.

  • Greenhouse gases (GHGs) means the aggregate group of six greenhouse gases: carbon dioxide, nitrous oxide, methane, hydrofluorocarbons, perfluorocarbons, and sulfur hexafluoride.

  • Turbidity means the cloudy condition of water due to the presence of extremely fine particulate materials in suspension that interfere with the passage of light.

  • Cooling Water means the water discharged from any use such as air conditioning, cooling or refrigeration, or to which the only pollutant added is heat.