Thermal System Insulation definition

Thermal System Insulation means material applied to pipes, fittings, boilers, tanks, ducts, or other structural components to prevent heat loss or gain.
Sample 1Sample 2Sample 3
Thermal System Insulation means material in a school building applied to pipes, fittings, boilers, breeching, tanks, ducts, or other interior structural components to prevent heat loss or gain, or water condensation, or for other purposes;
Sample 1Sample 2Sample 3
Thermal System Insulation means a product that is used in a heating, ventilating, cooling, plumbing or refrigeration system to insulate any hot or cold surface, including, without limitation, a pipe, duct, valve, boiler, flue or tank, or equipment on or in a building.]
Sample 1Sample 2

Examples of Thermal System Insulation in a sentence

  • Thermal System Insulation (TSI) ACM: – Any ACM which is applied to pipes, boilers, boiler tanks, ducts, or other systems to prevent heat loss or gain.

  • Activities involving the removal of Thermal System Insulation (TSI) and surfacing ACM and PACM.

  • Examples include spray-applied fireproofing and acoustical texture ceilings.▪ Thermal System Insulation (TSI) refers to insulation that is applied to heating or mechanical system components.

  • Typically asbestos-containing building materials (ACBM) are segregated into three categories: Thermal System Insulation (TSI) usually found on pipes, boilers, and HVAC ducts; surfacing materials such as sprayed or troweled-on fireproofing and insulation, and plasters; and miscellaneous materials including vinyl composite floor tiles, floor sheeting, adhesives, roofing materials, window glazing and cement products.

  • The suspect ACM were also categorized into their applications including, Thermal System Insulation (TSI), Surfacing ACM, and Miscellaneous ACM.

  • Leveling Compounds & Fillers THERMAL SYSTEM INSULATION (TSI) - Thermal System Insulation applications are typically friable and medium percentage in asbestos content (15 - 45%).

  • During inspection, suspect ACBM were separated into three EPA categories: Thermal System Insulation (TSI), Surfacing ACBM, and Miscellaneous ACBM.

  • Contractors working with materials that may contain asbestos should be trained and certified for each of the four classes of work on asbestos containing materials, as follows:  Class I – activities involving the removal of Thermal System Insulation (TSI), such as pipe and boiler insulation.

  • Dry sweeping or dusting shall not be done in areas with damaged asbestos-containing Thermal System Insulation (TSI), spray on ACM or other friable ACM.

  • Work Area C is defined as the removal of all asbestos-containing Thermal System Insulation.


More Definitions of Thermal System Insulation

Thermal System Insulation or “TSI” means material that is applied to pipes, fittings, boilers, breeching, tanks, ducts, or other interior structural components to prevent heat loss or gain or water condensation, or for other purposes.
Sample 1
Thermal System Insulation means material applied to pipes, fittings, boilers, tanks, ducts, or
Sample 1
Thermal System Insulation means ACM applied to pipes, fittings, boilers, breeching, tanks, ducts, or other structural components to prevent heat loss.
Sample 1

Related to Thermal System Insulation

  • Geothermal fluid means water in any form at temperatures greater than 120

  • Fuel system means the components which store or transport fuel on board the vehicle and comprise the fuel tank system, all fuel and vapour lines, any non-tank mounted fuel pumps and the activated carbon canister.

  • Plasma arc incinerator means any enclosed device using a high intensity electrical discharge or arc as a source of heat followed by an afterburner using controlled flame combustion and which is not listed as an industrial furnace.

  • Bulk gasoline plant means a gasoline storage and distribution facility with an average daily throughput of 20,000 gallons (76,000 liters) of gasoline or less on a 30-day rolling average.

  • Diesel means a distillate oil which can be used as fuel for the operation of a compression ignition engine and which has an approximate boiling temperature of between 150 °C to 400 °C;

  • Engine degreaser means a cleaning product designed to remove grease, grime, oil and other contaminants from the external surfaces of engines and other mechanical parts.

  • Incinerator means any enclosed device that:

  • Fluoroscopic imaging assembly means a subsystem in which X-ray photons produce a visual image. It includes the image receptor(s) such as the image intensifier and spot-film device, electrical interlocks, if any, and structural material providing linkage between the image receptor and diagnostic source assembly.

  • total system means the transmission system and the distribution system of the Board taken together;

  • Chemical Storage Facility means a building, portion of a building, or exterior area adjacent to a building used for the storage of any chemical or chemically reactive products.

  • High global warming potential hydrofluorocarbons means any hydrofluorocarbons in a particular end use for which EPA’s Significant New Alternatives Policy (SNAP) program has identified other acceptable alternatives that have lower global warming potential. The SNAP list of alternatives is found at 40 CFR Part 82 subpart G with supplemental tables of alternatives available at (http://www.epa.gov/snap/).

  • Disposal system means a system for disposing of sewage, industrial waste, or other wastes, or for the use or disposal of sewage sludge. “Disposal system” includes sewer systems, treatment works, point sources, dispersal systems, and any systems designed for the usage or disposal of sewage sludge.

  • Polystyrene foam adhesive means an aerosol adhesive designed to bond polystyrene foam to substrates.

  • Gasification means the substoichiometric oxidation or steam reformation of a substance to produce a gaseous mixture containing two or more of the following: (i) oxides of carbon; (ii) methane; and (iii) hydrogen;

  • Hydrofluorocarbons means compounds that only contain hydrogen, fluorine, and carbon.

  • Incineration means an engineered process involving burning or combustion of solid waste to thermally degrade waste materials at high temperatures;

  • explosive actuated fastening device means a tool that is activated by an explosive charge and that is used for driving bolts, nails and similar objects for the purpose of providing fixing;

  • Bottle means any vessel intended to contain liquids and having a capacity of not more than 43

  • Diatomaceous earth filtration means a process resulting in substantial particulate removal in which (1) a precoat cake of diatomaceous earth filter media is deposited on a support membrane (septum), and (2) while the water is filtered by passing through the cake on the septum, additional filter media known as body feed is continuously added to the feed water to maintain the permeability of the filter cake.

  • Single tomogram system means a CT x-ray system which obtains x-ray transmission data during a scan to produce a single tomogram.

  • Fuel burning equipment means any furnace, boiler, apparatus, stack and all associated equipment, used in the process of burning fuel.

  • Finished water means the water that is introduced into the distribution system of a public water system and is intended for distribution and consumption without further treatment, except as treatment necessary to maintain water quality in the distribution system (e.g., booster disinfection, addition of corrosion control chemicals).

  • Low-level radioactive waste or “waste” means radioactive material that consists of or contains class A, B, or C radioactive waste as defined by 10 C.F.R. 61.55, as in effect on January 26, 1983, but does not include waste or material that is any of the following:

  • Cabinet x-ray system means an x-ray system with the x-ray tube installed in an enclosure independent of existing architectural structures except the floor on which it may be placed. The cabinet x-ray system is intended to contain at least that portion of a material being irradiated, provide radiation attenuation, and exclude personnel from its interior during generation of radiation. Included are all x-ray systems designed primarily for the inspection of carry-on baggage at airline, railroad, and bus terminals, and in similar facilities. An x-ray tube used within a shielded part of a building, or x-ray equipment that may temporarily or occasionally incorporate portable shielding, is not considered a cabinet x-ray system.

  • Nitrogen oxides means nitric oxide and nitrogen dioxide, expressed as nitrogen dioxide (NO2);

  • Solid insulator means the insulating coating of wiring harnesses, provided in order to cover and prevent the high voltage live parts from any direct contact.