Transitional Surfaces definition

Transitional Surfaces means the imaginary inclined planes that extend upward and outward from the lateral limits of a Strip and the Approach Surfaces, which planes are more particularly described in Part IV of the schedule.
Sample 1Sample 2Sample 3
Transitional Surfaces means surfaces that extend outward at 90 degree angles to the runway centerline and the runway centerline extended at a slope of seven feet horizontally for each foot vertically from the sides of the primary and approach surfaces to where they intersect the horizontal and conical surfaces. Transitional surfaces for those portions of the precision approach surfaces, which project through and beyond the limits of the conical surface, extend a distance of 5,000 feet measured horizontally from the edge of the approach surface and at 90 degree angles to the extended runway centerline.
Sample 1
Transitional Surfaces means those surfaces extended outward at ninety-degree (90°) angles to the runway centerline and the runway centerline extended at a slope of seven feethorizontally for each foot vertically from the sides of the primary and approach surfaces to where they intersect the horizontal and conical surfaces.
Sample 1

Examples of Transitional Surfaces in a sentence

  • Airport Approach and Transitional Zone (AAT) Properties within the Airport Approach and Transitional Zone (AAT) are subject to additional height limitations resulting from the FAA Approach and Transitional Surfaces as described in the Hesperia Airport Comprehensive Land Use Plan.

  • Structures that would project within the FAA Approach and Transitional Surfaces are not allowed.

  • The width of the Transition Zone is determined in the same manner as Transitional Surfaces, extends outward and upward at right angles to the centerline of the Primary, Clear, A-1 and A-1 Zones extended at a slope of seven to one (7:1) from the sides of the the Primary, Clear, A-1, and A-2 Zones to where they intersect with the horizontal surface.

  • The Transitional Surfaces consist of the airspace above planes which slope upward and outward laterally from the sides of the planes forming the base of the Approach/Departure Surfaces and from the sides of the Runway Landing Areas.

  • The Height Restriction Area is defined as the Approach Surfaces plus the Transitional Surfaces plus the Horizontal Surface plus the Conical Surface.

  • In order to carry out the provisions of this Chapter, there are hereby established certain Zones which include all of the area and airspace of Town of Bridgewater lying equal to and above the Approach Surfaces, Transitional Surfaces, Horizontal Surfaces, and Conical Surfaces as they apply to the Airport.

  • The imaginary areas in space which are defined by the Approach Surfaces, Transitional Surfaces, Special Height Surface, Horizontal Surface, and Conical Surface and in which any object extending above these imaginary surfaces is an obstruction.

  • The plan will be sufficient to depict the design, the layout of existing and planned facilities and features, ground contours at 10-foot intervals, the Building Restriction Lines, the relationship of the Final Approach and Takeoff Area (FATO), the Touchdown and Lift-off Area (TLOF), the safety area and the Approach/Departure and Transitional Surfaces (as defined in FAA Advisory Circular 150/5390-2) to the land parcel(s) on which the Heliport/Helistop is to be located and to adjoining land parcels.

  • Code of Federal Regulations, Title 14 Part 77 Transitional Surfaces (FAR Part 77).

  • Transitional Surfaces, symmetrically located on either side of runways, have variable widths as shown on the zoning map.


More Definitions of Transitional Surfaces

Transitional Surfaces means the imaginary inclined surface that extends upward and outward from the lateral limits of the strip surface and its approach surfaces and that is described in Part 5 of the schedule.(surface de transition)
Sample 1
Transitional Surfaces means the imaginary inclined planes more particularly described in Part V of Appendix “A”;
Sample 1
Transitional Surfaces means the imaginary inclined planes more particularly described in Part V of Schedule “A”, and shown in magenta in Schedule “B”. APPLICATION
Sample 1

Related to Transitional Surfaces

  • Development Site means any parcel or lot on which exists or which is intended for building development other than the following:

  • Massive Multiauthor Collaboration Site (or “MMC Site”) means any World Wide Web server that publishes copyrightable works and also provides prominent facilities for anybody to edit those works. A public wiki that anybody can edit is an example of such a server. A “Massive Multiauthor Collaboration” (or “MMC”) contained in the site means any set of copyrightable works thus published on the MMC site.

  • Accelerator-produced material means any material made radioactive by a particle accelerator.

  • Disabled parking license plate means a license plate that displays the international symbol of access

  • Generator Maintenance Outage means the scheduled removal from service, in whole or in part, of a generating unit in order to perform necessary repairs on specific components of the facility, if removal of the facility meets the guidelines specified in the PJM Manuals.

  • Common Areas is defined as all areas and facilities outside the Premises and within the exterior boundary line of the Project and interior utility raceways and installations within the Unit that are provided and designated by the Lessor from time to time for the general non-exclusive use of Lessor, Lessee and other tenants of the Project and their respective employees, suppliers, shippers, customers, contractors and invitees, including parking areas, loading and unloading areas, trash areas, roadways, walkways, driveways and landscaped areas.

  • Manufacturing Site means the facilities where a Compound is Manufactured by or on behalf of a Party, as such Manufacturing Site may change from time to time in accordance with Section 8.7.

  • service delivery and budget implementation plan means a detailed plan approved by the mayor of a municipality in terms of section 53(1) (c) (ii) for implementing the municipality’s delivery of municipal services and its annual budget.

  • Generator Planned Outage means the scheduled removal from service, in whole or in part, of a generating unit for inspection, maintenance or repair with the approval of the Office of the Interconnection in accordance with the PJM Manuals.

  • Cultivation site means a location where cannabis is planted, grown, harvested, dried, cured, graded, or trimmed, or a location where any combination of those activities occurs.

  • Tandem parking means that two or more automobiles are parked on a driveway or in any other location on a lot, lined up behind one another.

  • Restricted use pesticide means any pesticide or device which, when used as directed or in accordance with a widespread and commonly recognized practice, the director determines, subsequent to a hearing, requires additional restrictions for that use to prevent unreasonable adverse effects on the environment including people, lands, beneficial insects, animals, crops, and wildlife, other than pests.

  • Backflow Prevention Assembly means any mechanical assembly installed at a water service line or at a plumbing fixture to prevent a backflow contamination event, provided that the mechanical assembly is appropriate for the identified contaminant at the cross connection and is an in-line field-testable assembly.

  • Training Site means xxxxx://xxx.xxx.xxx/training-certification.html.

  • Temporary clean coal technology demonstration project means a clean coal technology demonstration project that is operated for a period of five years or less and that complies with the SIP and other requirements necessary to attain and maintain the national ambient air quality standards during the project and after the project is terminated.

  • Additional SDU Study means a deliverability study that a Developer may elect to pursue as that term is defined in OATT Section 25 (OATT Attachment S). For purposes of Section 23.4.5 of this Attachment H, “Affiliated Entity” shall mean, with respect to a person or Entity:

  • Application area means the area where the coating is applied by spraying, dipping, or flow coating techniques.

  • Plant and materials means: The Plant and materials in respect of which an advance payment prior to manufacture is required, which the City of Cape Town has agreed may be subject to advance payment, such Plant and materials being listed in the Schedule of Plant and materials.

  • Landscaped area means all the planting areas, turf areas, and water features in a landscape design plan subject to the Maximum Applied Water Allowance and Estimated Applied Water Use calculations. The landscaped area does not include footprints of buildings or structures, sidewalks, driveways, parking lots, decks, patios, gravel or stone walks, other pervious or non-pervious hardscapes, and other non-irrigated areas designated for non-development (e.g., open spaces and existing native vegetation).

  • COVID-19 symptoms means fever of 100.4 degrees Fahrenheit or higher, chills, cough, shortness of breath or difficulty breathing, fatigue, muscle or body aches, headache, new loss of taste or smell, sore throat, congestion or runny nose, nausea or vomiting, or diarrhea, unless a licensed health care professional determines the person’s symptoms were caused by a known condition other than COVID-19.

  • Construction materials means any tangible personal property that will be

  • Parking Garage means a building or portion of a building, other than a private garage, that is used for the temporary parking of motor vehicles;

  • Web Site Accessibility Standards/Specifications means standards contained in Title 1 Texas Administrative Code Chapter 206.

  • Maximum medical improvement means a point in time when any medically

  • Areas means such areas within the DAS Areas that are identified in Annexure A annexed to this Agreement;

  • Common Areas and Facilities means collectively the Development Common Areas and Facilities and the Residential Common Areas and Facilities and all those parts and such of the facilities of the Development designated as common areas and facilities in any Sub-Deed;