Urethane coating definition

Urethane coating means the application of any surface coating formulation, except plastisol, to urethane coated fabric or urethane sheets that are more than 0.002 inches (50 micrometers) thick, except resilient floor covering and flexible packaging.
Sample 1Sample 2Sample 3

Examples of Urethane coating in a sentence

  • The exterior finish shall be PVC coating, 40-mil nominal thickness with bond to metal having tensile strength greater than PVC and an interior finish consisting of a 2-mil nominal thickness of Urethane coating.

  • Urethane coating of nominal 2 mil thickness shall be uniformly and consistently applied to the interior of all conduit and fittings.

  • In order to meet this requirement, an additional Personal Adviser has been recruited to support the age group.

  • Install one layer of White-Knight Urethane coating at 1.5 gal per square, install polyester reinforcement, & install White-Knight Urethane coating at 1.5 gal per square.

  • Urethane coating shall be applied on the entire exterior of the garage metal corrugated roof, and all other material needing to be painted white.

  • And over-utilization of imagining equipment is a growing concern in hospitals.

  • Containers from any of the following: Oil treatment; Diesel fuel treatment; Cleaning/flushing fluids for motors/equipment; Winter start fluid; Brake fluid; Undercoating; Penetrating oil; Hydraulic jack oil; 3-in-1 household oil; Aerosol propelled lubricant; Gun oil; Kerosene; Urethane coating; Sewing machine oil; Cooking oil; Windshield washer fluid; Emulsified oil.

  • Containers from any of the following: Oil treatment; Diesel fuel treatment; Cleaning/flushing fluids for motors/equipment; Winter start fluid; Brake fluid; Undercoating; Penetrating oil; Hydraulic xxxx oil; 3-in-1 household oil; Aerosol propelled lubricant; Gun oil; Kerosene; Urethane coating; Sewing machine oil; Cooking oil; Windshield washer fluid; Emulsified oil.

  • Urethane coating of nominal 2 mil thickness shall be uniformly and consistently applied to the interior of the conduit and over the threads.

  • Reinforced Urethane coating over exposed horizontal concrete surfaces.

Related to Urethane coating

  • Floor coating means an opaque coating that is labeled and designed for application to flooring, including but not limited to, decks, porches, steps, and other horizontal surfaces which may be subject to foot traffic.

  • Coating means a material applied onto or impregnated into a substrate for protective, decorative, or functional purposes. Such materials include, but are not limited to, paints, varnishes, sealers, and stains.

  • Metallic coating means a coating which contains more than five grams of metal particles per liter of coating, as applied. Metal particles are pieces of a pure elemental metal or a combination of elemental metals.

  • Antenna coating means a coating labeled and formulated exclusively for application to equipment and associated structural appurtenances that are used to receive or transmit electromagnetic signals.

  • Flat coating means a coating that is not defined under any other definition in this section and that registers gloss less than 15 on an 85-degree meter or less than 5 on a 60-degree meter.

  • Roll coating means the application of a coating material to a substrate by means of hard rubber or steel rolls.

  • Touch-up coating means a coating used to cover minor coating imperfections appearing after the main coating operation.

  • Faux finishing coating means a coating labeled and formulated as a stain or a glaze to create artistic effects including, but not limited to, dirt, old age, smoke damage, and simulated marble and wood grain.

  • Plastic means material which contains as an essential ingredient a high polymer, such as polyethylene terephthalate, high density polyethylene, Vinyl, low density polyethylene, polypropylene, polystyrene resins, multi-materials like acrylonitrile butadiene styrene, polyphenylene oxide, polycarbonate, polybutylene terephthalate ;

  • Air dried coating means a coating that is dried by the use of air or forced warm air at temperatures up to 1940F (900C).

  • Automotive windshield washer fluid means any liquid designed for use in a motor vehicle windshield washer system either as an antifreeze or for the purpose of cleaning, washing, or wetting the windshield. Automotive windshield washer fluid does not include fluids placed by the manufacturer in a new vehicle.

  • Dip coating means the application of a coating material to a substrate by dipping the part into a tank of the coating material.

  • Specialty coating means any coating that is manufactured and used for one (1) of the following specialized applications:

  • Nuclear coating means a protective coating formulated and recommended to seal porous surfaces such as steel (or concrete) that otherwise would be subject to intrusions by radioactive materials. These coatings must be resistant to long-term (service life) cumulative radiation exposure [ASTM method D4082], relatively easy to decontaminate, and resistant to various chemicals to which the coatings are likely to be exposed [ASTM method D3912].

  • Flow coating means a coating labeled and formulated exclusively for use by electric power companies or their subcontractors to maintain the protective coating systems present on utility transformer units.

  • Biomethane means biogas that meets pipeline quality natural gas standards.

  • Clear coating means a transparent coating designed to provide the final gloss and resistance properties of the coating system;

  • Pretreatment coating means a coating which contains no more than 12% solids by weight, and at least 0.5% acid by weight, is used to provide surface etching, and is applied directly to metal surfaces to provide corrosion resistance, adhesion, and ease of stripping.

  • Low-solids coating means a coating containing 0.12 kilogram or less of solids per liter (one pound or less of solids per gallon) of coating material.

  • Repair coating means a coating used to re-coat portions of a previously coated product which has sustained mechanical damage to the coating following normal coating operations.

  • Undercoating means any aerosol product designed to impart a protective, non-paint layer to the undercarriage, trunk interior, and/or firewall of motor vehicles to prevent the formation of rust or to deaden sound. “Undercoating” includes, but is not limited to, rubberized, mastic, or asphaltic products.

  • Furniture coating means any paint designed for application to room furnishings including, but not limited to, cabinets (kitchen, bath and vanity), tables, chairs, beds, and sofas.

  • Polymer means a substance consisting of molecules characterised by the sequence of one or more types of monomer units. Such molecules must be distributed over a range of molecular weights wherein differences in the molecular weight are primarily attributable to differences in the number of monomer units. A polymer comprises the following:

  • Basecoat means a coat of colored material, usually opaque, that is applied before graining inks, glazing coats, or other opaque finishing materials and is usually topcoated for protection.

  • Spirits means any beverage which contains alcohol obtained by distillation mixed with drinkable water and other substances in solution, including, but not limited to, brandy, rum, whisky, and gin.

  • Topcoat means a coating that is applied over a primer on an aerospace vehicle or component for appearance, identification, camouflage, or protection. Topcoats that are defined as specialty coatings are not included under this definition.