Valid Meter Reading definition

Valid Meter Reading means a reading of the index of the meter comprised in the Metering Equipment at the time of the relevant Disconnection;” Annex 6 - DIVERSION WORKS
Sample 1Sample 2Sample 3
Valid Meter Reading means a Meter Reading that is not an Invalid Meter Reading,
Sample 1Sample 2Sample 3
Valid Meter Reading means an export meter reading that We’ve confirmed is within Our set limits. These limits are based on certain tolerances and factors in the time of year, electricity exported in the past and other information. We will obtain readings either remotely or We will ask You to send them in as a photo, clearly showing the meter serial number and export reading.
Sample 1Sample 2Sample 3

Examples of Valid Meter Reading in a sentence

  • POFR”) shall be calculated in respect of the number of Periods of Outage experienced by a Transporter during any month, as follows: POFR = (X/Y)*100 where: X = the number of Performance Relevant Supply Meters in respect of which one or more Periods of Outage have occurred during that month; and Y = the number of Performance Relevant Supply Meters which are installed on the last day of a month and which have successfully submitted at least one Valid Meter Reading to the User during that month.

  • WhyAt present, while Valid Meter Reading submission performance targets are clearly laid out in the UNC TPD Section M, there is no further incentive to ensure Valid Meter Reading performance reaches a suitable level and is maintained.

  • There will be no requirement to transfer those Supply Points from Classes 2 and 3 into Class 4 that have had a change of Supplier during the consecutive period where the minimum required Valid Meter Reading standard has not been reached.

  • However, Shippers can benefit from lower UIG weighting factors by moving sites into Classes 2 and 3, but with no incentive or link to minimum levels of Valid Meter Reading submission performance.

  • The current Valid Meter Reading submission targets for Class 2 and 3 Supply Points as stated in UNC TPD Section M, stands at 97.5% of a Shipper’s portfolio for Class 2, and 90% of a Shipper’s portfolio per month for Class 3.

  • The Modification proposes the introduction of obligations related to Valid Meter Reading submission performance for Class 2 and 3 Supply Points to ensure Shippers that use the relevant settlement classes are able to fulfil the associated Valid Meter Reading submission obligations.

  • As it stands currently, performance targets for Valid Meter Reading submissions are clearly laid out in the UNC for all settlement classes.

  • Without this link, the additional readings available in these classes will not help the temporary UIG situation, but would further hinder it, potentially creating more unreconciled gas in these categories.Since November 2017, the PAC has been monitoring levels of Valid Meter Reading submissions for Classes 2 and 3 as the post Nexus settlement classes have been taken up by Shippers and there are now some 2.1 million Supply Points currently in Class 3.

  • This Meter Reading will be a Valid Meter Reading – i.e., it would be used for reconciliation (i.e., a Reconciliation Meter Reading) and could be used for AQ – but since it is proposed that this is added once the Opening Meter Reading has been loaded then it is unlikely to be utilised as the AQ Closing Reading (TPD M 2.3.7 (a) refers).

  • Amend paragraph 5.2.2 to read as follows:Subject to paragraph 5.2.3, if in respect of any Day following the Day to which the relevant Meter Reading relates the Transporter does not provide to a User a Valid Meter Reading by 14:00 hours on the Day following each such Day (“the liability cut-off time”) the Transporter shall pay to the User the sum of £3.


More Definitions of Valid Meter Reading

Valid Meter Reading means a Meter Reading which we determine is within the limits that we have set based on certain tolerances, taking into account seasonality, historic generation and other relevant factors; You/your means the person who has entered into this Agreement with us, as stated in your FiT Plan;
Sample 1
Valid Meter Reading means an export meter reading that We’ve confirmed is within Our set limits. 0PI hI YQZ Qjh <gI D<hI G] [ EI gj<Q[ j] YI g<[ EI h <[ GN<Ej] gh Q[ jPI jQZ I ] NsI <g I YI EjgQEQjs I r d] gjI GQ[ jPI d<hj <[ G] jPI g Q[ N] gZ <jQ] [ 7 I q QYY] Dj<Q[ gI <GQ[ Oh I QjPI g gI Z ] jI Ys ] g 7 I q QYY<hX9] k j] hI [ G
Sample 1
Valid Meter Reading means a Meter Reading that we’ve confirmed is within our set limits. These limits are based on certain tolerances and factor in the time of year, electricity created in the past and other similar information. VAT means ‘Value Added Tax’ as provided for in the Value Added Tax Act 1994. We, us or our means E.ON Energy Solutions Ltd. (Company Number 03407430) with registered office, Westwood Way, Westwood Business Park, Coventry, CV4 8LG. Working Day is Monday to Friday (09.00-17.00) excluding bank holidays or public holidays in England and Wales. You or your means the person who signs this Agreement with us, as stated in your FiT Plan. FiTTC/04/16
Sample 1

Related to Valid Meter Reading

  • Meter Reading means (as applicable) either a Generation Meter Reading and/or an Export Meter Reading;

  • Ultra Low Sulfur Diesel Fuel means diesel fuel that has a sulfur content of no more than fifteen parts per million.

  • Drug outlet means a pharmacy, nursing home, shelter home, convalescent home, extended care facility, drug abuse treatment center, penal institution, hospital, family planning clinic, student health center, retail store, wholesaler, manufacturer, mail-order vendor or other establishment with facilities located within or out of this state that is engaged in dispensing, delivery or distribution of drugs within this state.

  • Supply Pipe means any part of a service pipe which a water undertaker could not be, or have been required to lay under section 46 of the Water Industry Act 1991; and

  • High voltage bus means the electrical circuit, including the coupling system for charging the REESS, that operates on a high voltage.

  • Supply Point means the point of connection between the licensed network and your apparatus or equipment.

  • Network Supply Point or "NSP" means any Point of Connection between:

  • Dyed diesel fuel means diesel fuel that is dyed in accordance with internal revenue service rules or pursuant to any other internal revenue service requirements, including any invisible marker requirements.

  • Integrated Digital Loop Carrier means a subscriber loop carrier system that is twenty-four (24) local Loop transmission paths combined into a 1.544 Mbps digital signal which integrates within the switch at a DS1 level.

  • Combined sewer system means a system for conveying both sanitary sewage and storm water runoff.

  • high voltage means the classification of an electric component or circuit, if its working voltage is > 60 V and ≤ 1500 V DC or > 30 V and ≤ 1000 V AC root mean square (rms).

  • Meet-Point Billing (MPB means the billing associated with interconnection of facilities between two (2) or more LECs for the routing of traffic to and from an IXC with which one of the LECs does not have a direct connection. In a multi-bill environment, each Party bills the appropriate tariffed rate for its portion of a jointly provided Switched Exchange Access Service.

  • Play area means an area of frequent soil contact by children of less than six years of age as indicated by, but not limited to, factors including the following: the presence of play equipment (sandboxes, swing sets, and sliding boards), toys, or other children’s possessions, observations of play patterns, or information provided by parents, residents, caregivers, or property owners.

  • Reference evapotranspiration or “ETo” means a standard measurement of environmental parameters which affect the water use of plants. ETo is given expressed in inches per day, month, or year as represented in Appendix C of these Guidelines, and is an estimate of the evapotranspiration of a large field of four to seven-inch tall, cool-season grass that is well watered. Reference evapotranspiration is used as the basis of determining the Maximum Applied Water Allowances.

  • Smart Meter means a meter which tells us how much Energy you are using without us having to visit your home and which enables you to see how much Energy you are using;

  • Viator means the owner or holder of a policy who has a terminal illness or condition and who enters into a viatical settlement contract.

  • Hydrozone means a portion of the landscaped area having plants with similar water needs and rooting depth. A hydrozone may be irrigated or non-irrigated.

  • Interconnector means a transmission line which crosses or spans a border between Member States for the purpose of connecting the national transmission system of those Member States or a transmission line between a Member State and a third country up to the territory of the Member States or the territorial sea of that Member State;

  • Geothermal fluid means water in any form at temperatures greater than 120

  • Kit means a set of components that are packaged together and intended to be used to perform a specific in vitro diagnostic examination, or a part thereof;

  • Small municipal separate storm sewer system or "small MS4" means all separate storm sewers that are (i) owned or operated by the United States, a state, city, town, borough, county, parish, district, association, or other public body (created by or pursuant to state law) having jurisdiction over disposal of sewage, industrial wastes, stormwater, or other wastes, including special districts under state law such as a sewer district, flood control district or drainage district, or similar entity, or an Indian tribe or an authorized Indian tribal organization, or a designated and approved management agency under § 208 of the CWA that discharges to surface waters and (ii) not defined as "large" or "medium" municipal separate storm sewer systems or designated under 4VAC50-60-380 A 1. This term includes systems similar to separate storm sewer systems in municipalities, such as systems at military bases, large hospital or prison complexes, and highway and other thoroughfares. The term does not include separate storm sewers in very discrete areas, such as individual buildings.

  • INTER-CONNECTION POINT/ DELIVERY/ METERING POINT means a single point at 220kV or above, where the power from the Project(s) is injected into the identified ISTS Substation (including the dedicated transmission line connecting the Projects with the substation system) as specified in the RfS document. Metering shall be done at this interconnection point where the power is injected into. For interconnection with grid and metering, the WPDs shall abide by the relevant CERC/ SERC Regulations, Grid Code and Central Electricity Authority (Installation and Operation of Meters) Regulations, 2006 as amended and revised from time to time.

  • Copper Loop is a stand-alone local loop comprised entirely of copper wire or cable. Copper Loops include two-wire and four-wire analog voice-grade copper Loops, digital copper Loops (e.g., DS0s and integrated services digital network lines), as well as two-wire and four-wire copper Loops conditioned to transmit the digital signals needed to provide digital subscriber line services, regardless of whether the copper Loops are in service or held as spares. The copper Loop includes attached electronics using time division multiplexing technology, but does not include packet switching capabilities.

  • Dark pattern means a user interface designed or manipulated with the substantial effect of subverting or impairing user autonomy, decision- making, or choice and includes any practice the Federal Trade Commission refers to as a “dark pattern.”

  • Aerosol coating product means a pressurized coating product containing pigments or resins that dispenses product ingredients by means of a propellant, and is packaged in a disposable can for hand-held application, or for use in specialized equipment for ground traffic/marking applications.

  • Nominal tomographic section thickness means the full width at half-maximum of the sensitivity profile taken at the center of the cross-sectional volume over which x-ray transmission data are collected.