Examples of Vision panel in a sentence
At present, unless you insist on designer frames, you should be able to get a pair of glasses for free from any optician who is part of the Davis Vision panel.
Vision panel frames must be secured by means of nonreversible screws or other tamper proof fasteners.
Example #2 The description shows a Single Face, Center mounted Monopole Structure at a 35’ HAGL (Height Above Ground Level – measured from the ground to the bottom of the display face) with a Tri- Vision panel face at 12 ft.
Glass Vision panel to be provided as per requirement in the Flush Shutters.Hardware: All hardware for doors and windows shall be of Anodized aluminium/stainless steel or equivalent or as specified of approved size and design.
Each occupant evacuation elevator lobby shall be provided with a doorway that is protected with a 3/4-hour fire door assembly complying with Section 715.4. 3008.12.3.1 Vision panel.
Vision panel size and configuration should be selected based on a number of considerations, including:Doors design, including vision panel size and detailing, should match building standard if possible, especially if the door is in a public corridor lined with similar doors.Large vision panels can provide an expansive view into the lab.
Vision panel openings shall be reinforced and glass moldings shall be provided to secure glazing.
Vision panel with glazed units of size as per design / drawing and consisting of 6 mm thick hard coated heat strengthened Reflective Toughened glass of approved shade with characteristics as per specification fixed in precise size on the outer face of the infill panel of approved make and glazed in fill panel to be formed by approved means of special structural quality silicone adhesive sealant layer manufactured by Wacker, Dow coning or equivalent as per direction of Architect/ Engineer .
FD60 (S) FD 60 (S) SC & VP - Fire door 60 minutes for rating, smoke sealing self.SC & closing and vision panel required VP PB-push bar Emergency opening device complying with BSEN 1125 1997 VP Vision panel – required resistance for 60 minutesFR Fire resisting glazing (60) – 80 minutes resistance Fire Door signsAll the doors must be signed with following which should meet 80mm x 80m ridged plastic with 4 screws holes in size.
The room/area allocated for this service should be: • Well ventilated.• Adequately heated or mobile heating provided.• Vision panel installed in the door or room located within an area where vision can be maintained.Careers Wales careers advisers routinely make audio recordings of client interviews.