Waterproofing membrane definition

Waterproofing membrane means any clear or opaque coating that is labeled and formulated for application to concrete and masonry surfaces to provide a seamless waterproofing membrane that prevents any penetration of liquid water into the substrate. Waterproofing Membranes are intended for the following waterproofing applications: below-grade surfaces, between concrete slabs, inside tunnels, inside concrete planters, and under flooring materials. Waterproofing Membranes shall meet the following criteria:
Waterproofing membrane means a clear or opaque coating labeled and formulated for application to concrete and masonry surfaces to provide a seamless coat that prevents any penetration of liquid water into the substrate. These coatings are intended for the following waterproofing applications: below-grade surfaces, between concrete slabs, inside tunnels, inside concrete planters, and under flooring materials.
Waterproofing membrane means a clear or opaque coating that is labeled and formulated to be applied in a single coat of at least 25 mils dry film thickness to concrete and masonry surfaces to provide a seamless waterproofing membrane that prevents any penetration of liquid water into the substrate and that is intended for any of the following waterproofing applications: below-grade surfaces, between concrete slabs, inside tunnels, inside concrete planters and under flooring materials. “Waterproofing membrane” does not include topcoats that are concrete or masonry sealer.

Examples of Waterproofing membrane in a sentence

  • METHOD OF MEASUREMENT515.06 Waterproofing membrane including protective covering, complete in place, will be measured by the number of square yards of bridge deck covered.

  • Waterproofing membrane shall be applied in accordance with the manufacturer's recommendations.

  • Waterproofing membrane shall be clamped into place and sealant shall be placed in the caulking recess.

  • Roof walkways are meant to provide roof access to equipment and protect roof membranes from any damage.2. Roof Membrane Walkway: Waterproofing membrane composed of SBS modified bitumen and non-woven polyester reinforcement, used to protect membranes subjected to excessive foot traffic.

  • Bonded membrane: Waterproofing membrane applied and bonded to the concrete surface.

  • Unbonded Membrane: Waterproofing membrane material prior to installation.

  • We will do our best to make the transition as smooth and as quick as possible.

  • Waterproofing membrane shall not be applied until the tack coat has cured completely.

  • Mechanically remove curing compounds and form release agents from substrate that adversely affect adhesion of Self-Adhered Sheet Waterproofing membrane.

  • Waterproofing membrane is tested on glass substrate.Waterproofing systems including primer, liquid applied waterproofing membrane and tile adhesive are tested on gypsum board with tiling as described in Table 7.


More Definitions of Waterproofing membrane

Waterproofing membrane means a clear or opaque coating that is labeled and formulated for application to concrete and masonry surfaces to provide a seamless waterproofing membrane that prevents any penetration of liquid water into the substrate.
Waterproofing membrane means a clear or opaque coating labeled and formulated for application to concrete and masonry surfaces to provide a seamless coat preventing penetration of liquids into the substrate. It is intended for below-grade surfaces: between concrete slabs, inside tunnels and concrete planters, and under flooring materials.
Waterproofing membrane means a clear or opaque coating that is labeled and formulated for application to concrete and masonry surfaces to provide a seamless waterproofing membrane that prevents any penetration of liquid water into the substrate and does not include topcoats in the concrete/masonry sealer category. Waterproofing membranes are intended for below-grade surfaces, between concrete slabs, inside tunnels, inside concrete planters, and under flooring materials. Waterproofing membranes must be applied in a single coat of at least 25 mils (at least 0.025 inch) dry film thickness and meet or exceed the requirements contained in ASTM C836-06 “Standard Specification for High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane for Use with Separate Wearing Course” (2018).

Related to Waterproofing membrane

  • Waterproofer means a product designed and labeled exclusively to repel water from fabric or leather substrates. Waterproofer does not include fabric protectants.

  • Floodproofing means any combination of structural and nonstructural additions, changes, or adjustments to structures which reduce or eliminate flood damage to real estate or improved real property, water and sanitation facilities, structures, and their contents.

  • Graffiti shall not include: (1) any sign or banner that is authorized by, and in compliance with, the applicable requirements of the San Francisco Public Works Code, the San Francisco Planning Code or the San Francisco Building Code; or (2) any mural or other painting or marking on the property that is protected as a work of fine art under the California Art Preservation Act (California Civil Code Sections 987 et seq.) or as a work of visual art under the Federal Visual Artists Rights Act of 1990 (17 U.S.C. §§ 101 et seq.). Any failure of Contractor to comply with this section of this Agreement shall constitute an Event of Default of this Agreement.

  • Membrane filtration means a pressure or vacuum driven separation process in which particulate matter larger than one micrometer is rejected by an engineered barrier, primarily through a size exclusion mechanism, and which has a measurable removal efficiency of a target organism that can be verified through the application of a direct integrity test. This definition includes the common membrane technologies of microfiltration, ultrafiltration, nanofiltration, and reverse osmosis.

  • Roof means a non-porous cover for a structure such as (by way of example and not limitation) Lexan barriers or shingles but not a shade trellis, ivy or other open or porous material that may also be used as a cover.

  • Nonconforming structure means a structure the size, dimension

  • Structural as herein used shall mean any portion of the Leased Premises, Building or Common Areas of the Complex which provides bearing support to any other integral member of the Leased Premises, Building or Common Areas of the Complex such as, by limitation, the roof structure (trusses, joists, beams), posts, load bearing walls, foundations, girders, floor joists, footings, and other load bearing members constructed by Landlord.

  • explosive actuated fastening device means a tool that is activated by an explosive charge and that is used for driving bolts, nails and similar objects for the purpose of providing fixing;

  • Polystyrene foam adhesive means an aerosol adhesive designed to bond polystyrene foam to substrates.

  • Interior means the spaces, parts, components or elements of an individual dwelling unit.

  • Basement means any area of the building having its floor subgrade (below ground level) on all sides.

  • Corrosion inhibitor means a substance capable of reducing the corrosivity of water toward metal plumbing materials, especially lead and copper, by forming a protective film on the interior surface of those materials.

  • Fluoroscopic imaging assembly means a subsystem in which X-ray photons produce a visual image. It includes the image receptor(s) such as the image intensifier and spot-film device, electrical interlocks, if any, and structural material providing linkage between the image receptor and diagnostic source assembly.

  • Plasma arc incinerator means any enclosed device using a high intensity electrical discharge or arc as a source of heat followed by an afterburner using controlled flame combustion and which is not listed as an industrial furnace.

  • Filter means material placed in the useful beam to preferentially absorb selected radiations.

  • Duct is a single enclosed path to house facilities to provide Telecommunications Services.

  • Valve means a device used to control the flow of water in the irrigation system.

  • Weathertight means that in any sea conditions water will not penetrate into the ship.

  • Behind The Meter Generation shall refer to a generation unit that delivers energy to load without using the Transmission System or any distribution facilities (unless the entity that owns or leases the distribution facilities has consented to such use of the distribution facilities and such consent has been demonstrated to the satisfaction of the Office of the Interconnection); provided, however, that Behind The Meter Generation does not include (i) at any time, any portion of such generating unit’s capacity that is designated as a Generation Capacity Resource; or (ii) in an hour, any portion of the output of such generating unit that is sold to another entity for consumption at another electrical location or into the PJM Interchange Energy Market.

  • Structural components means liners, leachate collection systems, final covers, run-on/run-off systems, and any other component used in the construction and operation of the MSWLF that is necessary for protection of human health and the environment.

  • Anaerobic digester means a liquid manure storage area that is constructed with the intent to capture and combust gas emissions resulting from the digestion of waste by microbes in anaerobic conditions. An anaerobic digester is a LMSA and is required to comply with all requirements applicable to LMSAs. Requirements specific to anaerobic digesters will be noted when applicable.

  • Engine degreaser means a cleaning product designed to remove grease, grime, oil and other contaminants from the external surfaces of engines and other mechanical parts.

  • Coating means a material applied onto or impregnated into a substrate for protective, decorative, or functional purposes. Such materials include, but are not limited to, paints, varnishes, sealers, and stains.

  • Sensor means any measurement device that is not part of the vehicle itself but installed to determine parameters other than the concentration of gaseous and particle pollutants and the exhaust mass flow.

  • Cyanoacrylate adhesive means any adhesive with a cyanoacrylate content of at least 95% by weight.

  • water meter means any apparatus for measuring or showing the volume of water supplied to, or of effluent discharged from any premises;