Weighing in definition

Weighing in means the weight of the greyhound taken at first weighing in, in accordance with the rules.
Weighing in means the weight of the greyhound taken at first weighing in as provided for in this rule.

Examples of Weighing in in a sentence

  • Weighing in at just 15 ounces the new 7290M is approximately 30% lighter than the 7290 but still has the same 175db output of the 7290 and produces 6-8 million candelas of light.

  • Weighing in at just 15 ounces the new 7290M is approximately 30% lighter than the 7290 but still has the same 175db output of the 7290 and produces 6-8 million candela of light.

  • Weighing in at just 15 ounces the 7290M is approximately 30% lighter than the 7290 but still has the same 175db output of the 7290 and produces 6-8 million candelas of light.

  • Weighing in at around 50 kg and easily cartable on the top of a car, the 125 is the ideal craft for family sailing and family involvement.

  • These filters are conditioned and weighed in xxxxxxxx that conform to 40 CFR 86.1312-2007 according to EEVRD TIP 07-045 (Particulate Filter Conditioning and Weighing in Accordance with CFR Title 40 Part 1065).

  • Five reports had been uploaded to the online CIML meeting website the previous week as Addenda 11.3a-11.3e, from the BIPM, CECIP, ILAC, IAF, and, for the first time, the International Society for Weighing in Motion, ISWIM.

  • Lesley Fair, FTC Milestones: Weighing in on Weight Loss Cases, FED.

  • Weighing in particular will be a tough problem to address, but we are considering some soft methodological approaches that could yield results.Task 5.2: KPI DefinitionTask T5.2 is only being executed since M5 of the project.

  • Weighing in at just 15 ounces the new 7290M is approximately 30% lighter than the 7290 but still has the same 180db output of the 7290 and produces 6-8 million candelas of light.

  • Fields: “the location of the questioning, its duration, statements made during the interview, the presence or absence of physical restraints during the questioning, and the release of the interviewee at the end of the questioning.”32 Weighing in favor of his liberty to leave are these points: Defendant was not subjected to coercion of any sort.

Related to Weighing in

  • Loading Zone means a parking stall which is set aside for use by commercial vehicles if there is a sign referable to that stall marked ‘Loading Zone’;

  • Unloaded means, with respect to a firearm employing a percussion cap, flintlock, or other obsolete ignition system, when the weapon is uncapped or when the priming charge is removed from the pan.

  • Opt-in means to elect to become a NOx budget unit under the NOx budget trading program through a final, effective NOx budget opt-in permit under section 13 of this rule.

  • Harvest batch means a specifically identified quantity of dried flower or trim, leaves, and other cannabis plant matter that is uniform in strain, harvested at the same time, and, if applicable, cultivated using the same pesticides and other agricultural chemicals, and harvested at the same time.

  • Subsurface Borings and Testing means borings, probings and subsurface explorations, laboratory tests and inspections of samples, materials and equipment; appropriate professional interpretations of all the foregoing.

  • Container means any portable device in which a material is stored, transported, treated, disposed of, or otherwise handled.

  • ASTM means American Society for Testing and Materials.

  • Deck means a walkway immediately adjacent to a swimming pool.

  • GPA means the Agreement on Government Procurement in Annex 4 to the WTO Agreement1;

  • Cargo means any property carried on an aircraft other than mail, stores and accompanied or mishandled baggage;

  • User seal check or "fit check" means an action conducted by the respirator user to determine if the respirator is properly seated to the face. Examples include negative pressure check, positive pressure check, irritant smoke check, or isoamyl acetate check.

  • Sailing vessel means any vessel under sail provided that propelling machinery, if fitted, is not being used.

  • Calibration means the determination of (1) the response or reading of an instrument relative to a series of known radiation values over the range of the instrument, or (2) the strength of a source of radiation relative to a standard.

  • Recalibration means the adjustment of all DRG weights to reflect changes in relative resource consumption.

  • Flood Boundary and Floodway Map (FBFM means an official map of a community, issued by the FEMA, on which the Special Flood Hazard Areas and the floodways are delineated. This official map is a supplement to and shall be used in conjunction with the Flood Insurance Rate Map (FIRM).

  • Bulk gasoline plant means a gasoline storage and distribution facility with an average daily throughput of 20,000 gallons (76,000 liters) of gasoline or less on a 30-day rolling average.

  • Buy-In shall have the meaning set forth in Section 4(c)(v).

  • Sample means urine, blood, breath, saliva, or hair.

  • Overhaul means the restoration of an aircraft or aircraft component using methods, techniques, and practices acceptable to the Authority, including disassembly, cleaning, and inspection as permitted, repair as necessary, and reassembly; and testing in accordance with approved standards and technical data, or in accordance with current standards and technical data acceptable to the Authority, which have been developed and documented by the State of Design, holder of the type certificate, supplemental type certificate, or a material, part, process, or appliance approval under Parts Manufacturing Authorisation (PMA) or Technical Standard Order (TSO);

  • Bulk plant means a motor fuel storage and distribution facility that is not a terminal and from

  • Flight means any flight demonstration, flight test, taxi test, or other flight made in the performance of this contract, of for the purpose of safeguarding the aircraft, or previously approved in writing by the Contracting Officer.

  • Bulk mixing plant means machinery, appliances or other similar devices that are assembled in such a manner so as to be able to mix materials in bulk for the purposes of using the mixed product for construction work;

  • Radiation area means any area, accessible to individuals, in which radiation levels could result in an individual receiving a dose equivalent in excess of 0.05 mSv (0.005 rem) in 1 hour at 30 centimeters from the source of radiation or from any surface that the radiation penetrates.

  • Calibration gas means a gas mixture used to calibrate gas analysers.

  • Batch means a specific quantity of Product that is intended to be of uniform character and quality, within specified limits, and is produced during the same cycle of Manufacture as defined by the applicable Batch Record.

  • Fixed wing turbine powered aircraft means an aircraft that: