Well plugging definition

Well plugging means the closure of an abandoned well with plugging materials by procedures which will permanently seal the well from contamination by surface drainage and permanently seal off the well from contamination into an aquifer. “Well plugging” involves the proper application of filling and sealing materials.
Sample 1Sample 2Sample 3
Well plugging means the closure of an abandoned well with plugging materials by procedures which will
Sample 1Sample 2
Well plugging means the closure of an abandoned well with plugging materials by procedures which will permanently seal the well from contamination by surface drainage and permanently seal off the well from c ontamination into an aquifer. “Well plugging” includes the proper application of filling and sealing material. 567—48.3(455B) Applicability. The provisions contained herein apply to all GHEX loop boreholes constructed for the purpose of utilizing the heat-exchange properties of the ground or groundwater. They shall apply to all GHEX loop borehole systems constructed 20 feet or greater in depth. They shall also apply to both residential and commercial installations. These rules do not apply to surface water GHEX systems, trench installations less than 20 feet in depth, or other types of GHEX installations less than 20 feet deep. All GHEX pump and dump well systems, GHEX pump and re-inject well systems, GHEX standing column heat-exchange well systems or any other
Sample 1

Examples of Well plugging in a sentence

  • Plugging reports are usually completed by the operator or operator’s agent and must be submitted within a certain time following the conclusion of plugging.In some states a separate affidavit of plugging is Figure 7 Well plugging requirements by numbers of statesrequired if a plug job is not witnessed by agency personnel.

  • Well plugging materials shall conform to the requirements of COGCC 100-Series Rules (Definitions) and Rule 319.a.(1).

  • Well plugging requirements are provided in the Class VI Rule at 40 CFR 146.92.

  • Well plugging, abandonment and documentation of the abandonment procedures shall be completed in accordance with the attachment titled Ground Water Discharge Permit Monitoring Well Construction and Abandonment Conditions, Revision 1.1, March 2011, and all applicable local, state, and federal regulations.

  • Well plugging contracts are funded with permit surcharges which are in addition to the permit application fee.

  • Well plugging and abandonment liabilities stand at 30,796 and 23,933, as of December 31, 2021, and 2020, respectively (See Note 22.1).

  • Well plugging and abandonment at the end of the concession term requires that Company Management calculate the number of wells, the long-term costs of abandonment and the remaining time until abandonment.

  • Well plugging refers to the activities associated with removing well components, flushing the well, and installing plugs.

  • Well plugging and abandonment estimates should be adjusted by the Company at least annually or in the event of changes in the assessment criteria assumed.

  • Well plugging is performed as described in an Injection Well Plugging Plan required at 40 CFR 146.92(b), and post-injection site care and site closure activities are implemented pursuant to the Class VI PISC and Site Closure Plan, required at 40 CFR 146.93(a).


More Definitions of Well plugging

Well plugging means the closure of an abandoned well with plugging materials by procedures which will permanently seal the well from contamination by surface drainage and permanently seal off the well from contamination into an aquifer. “Well plugging” involves the proper application of filling and sealing materials. “Well plugging contractor” means a well contractor certified to plug only Class 1 or Class 3 wells but notcertified to abandon Class 2 wells or perform any other well services.Commented [16]: Well reconstruction - Defined in Chapter 49.
Sample 1

Related to Well plugging

  • Well-logging means all operations involving the lowering and raising of measuring devices or tools that may contain sources of radiation into well-bores or cavities for the purpose of obtaining information about the well or adjacent formations.

  • Injection well means a well into which fluids are injected. (See also “underground injection”.)

  • drilling means the act of boring a hole to reach a proposed bottom hole location through which oil or gas may be produced if encountered in paying quantities, and includes redrilling, sidetracking, deepening, or other means necessary to reach the proposed bottom hole location, testing, logging, plugging, and other operations necessary and incidental to the actual boring of the hole;

  • Water well means an excavation that is drilled, cored, bored, augered, washed, driven, dug, jetted, or otherwise constructed for the purpose of exploring for groundwater, monitoring groundwater, utilizing the geothermal properties of the ground, or extracting water from or injecting water into the aquifer. “Water well” does not include an open ditch or drain tiles or an excavation made for obtaining or prospecting for oil, natural gas, minerals, or products mined or quarried.

  • Oil well means any well capable of producing oil or oil and casinghead gas from a common source of supply as determined by the commission.

  • Deep well means a well located and constructed in such a manner that there is a continuous layer of low permeability soil or rock at least 5 feet thick located at least 25 feet below the normal ground surface and above the aquifer from which water is to be drawn.

  • Development Well means a well drilled inside the established limits of an oil or gas reservoir, or in close proximity to the edge of the reservoir, to the depth of a stratigraphic horizon known to be productive.

  • Remediation waste means all solid and hazardous wastes, and all media (including groundwater, surface water, soils, and sediments) and debris that are managed for implementing cleanup.

  • Workover means operations on a producing well to restore or increase production.

  • Gas well means a well producing gas or natural gas from a common source of gas supply as determined by the commission.

  • Test Well means a well constructed for the purpose of obtaining information needed to design a well prior to its construction. Test wells are cased and can be converted to observation or monitoring wells and under certain circumstances to production wells

  • well-being means general sense of contentment and quality of life.

  • Exploration Well means a well that is not a development well, a service well or a stratigraphic test well.

  • Exploratory Well means a well that is not a development well, a service well or a stratigraphic test well.

  • Contract Area means, on the Effective Date, the area described in Appendix-A and delineated on the map attached as Appendix B or any portion of the said area remaining after relinquishment or surrender from time to time pursuant to the terms of this Contract (including any additional area as provided under Article 11.3).

  • Remediation means any response, remedial, removal, or corrective action, any activity to cleanup, detoxify, decontaminate, contain or otherwise remediate any Hazardous Materials, Regulated Substances or USTs, any actions to prevent, cure or mitigate any Release, any action to comply with any Environmental Laws or with any permits issued pursuant thereto, any inspection, investigation, study, monitoring, assessment, audit, sampling and testing, laboratory or other analysis, or any evaluation relating to any Hazardous Materials, Regulated Substances or USTs.

  • Decommissioning means the measures taken at the end of a facility's operating life to assure the continued protection of the public from any residual radioactivity or other potential hazards present at a facility.

  • Horizontal well means a well bore drilled laterally at an angle of at least eighty (80) degrees to the vertical or with a horizontal projection exceeding one hundred (100) feet measured from the initial point of penetration into the productive formation through the terminus of the lateral in the same common source of supply.

  • Injection means the injection of carbon dioxide streams into the storage site;

  • Drill means a response to a planned, simulated event.

  • Subsurface Borings and Testing means borings, probings and subsurface explorations, laboratory tests and inspections of samples, materials and equipment; appropriate professional interpretations of all the foregoing.

  • Shallow well means a well located and constructed in such a manner that there is not a continuous layer of low-permeability soil or rock (or equivalent retarding mechanism acceptable to the department) at least 5 feet thick, the top of which is located at least 25 feet below the normal ground surface and above the aquifer from which water is to be drawn.

  • Reclamation means the United States Bureau of Reclamation.

  • borehole means a hole sunk into the earth for the purpose of locating, abstracting or using subterranean water and includes a spring;

  • stratigraphic test well means a drilling effort, geologically directed, to obtain information pertaining to a specific geologic condition. Ordinarily, such wells are drilled without the intention of being completed for hydrocarbon production. They include wells for the purpose of core tests and all types of expendable holes related to hydrocarbon exploration. Stratigraphic test wells are classified as (i) "exploratory type" if not drilled into a proved property; or (ii) "development type", if drilled into a proved property. Development type stratigraphic wells are also referred to as "evaluation wells".

  • JOA means the joint operating agreement currently in force in respect of operations pursuant to a Licence and identified as such in Schedule 1;