CONVENZIONE CONSIP PC DESKTOP WORKSTATION E MONITOR 2 LOTTO 4 ‐ WORKSTATION GRAFICHE]

“Dichiarazione DNSH – Scheda”

CONVENZIONE CONSIP PC DESKTOP WORKSTATION E MONITOR 2 LOTTO 4 ‐ WORKSTATION GRAFICHE]

La sottoscritta
Codice fiscale
Nella sua qualità di:
	Titolare o Legale rappresentante
□	Procuratore
Dell’operatore economico	Posdata S.r.l.

ai sensi e per gli effetti dell’art. 76 del D.P.R. n. 445/2000 consapevole della responsabilità e delle conseguenze civili e penali previste in caso di dichiarazioni mendaci e/o formazione od uso di atti falsi, nonché in caso di esibizione di atti contenenti dati non più corrispondenti a verità e consapevole, altresì, che qualora emerga la non veridicità del contenuto della presente dichiarazione il concorrente decadrà dai benefici per i quali la stessa è rilasciata

DICHIARA

che i prodotti “Lenovo ThinkStation P358 e Lenovo ThinkVision E24‐28” rispettano il principio DNSH (“Do No Significant Harm”), ovvero di “non arrecare danno significativo agli obiettivi ambientali”, così come espressamente previsto dall’art. 18 comma 4 lett. d) del Regolamento UE 241/2021, che istituisce il “Dispositivo per la ripresa e la resilienza” e all’art. 9 del Regolamento (UE) 2020/852 così come declinato nella circolare n. 33 del 13 ottobre 2022 della RGS ovvero concordato con la medesima.

A tal fine, viene prodotta la check‐list contenente gli elementi di controllo definiti nella scheda 3 “Acquisto, Leasing e Noleggio di computer e apparecchiature elettriche ed elettroniche” di cui alla Circolare RGS n.33 del 13 ottobre 2022 della RGS ovvero concordato con la medesima.

Scheda ‐ Acquisto di apparecchiature elettriche ed elettroniche

Verifiche e controlli da condurre per garantire il principio DNSH

Tempo di svolgimento delle verifiche	n.	Elemento di controllo	Esito (Sì/No/Non applicabile)	Commento (obbligatorio in caso di N/A)
	1	E' disponibile l'iscrizione alla piattaforma RAEE in qualità di	SI
		produttore e/o distributore e/o fornitore?
		I prodotti elettronici acquistati sono dotati di un’etichetta ambientale
	2	di tipo I, secondo la UNI EN ISO 14024, ad esempio TCO Certified EPEAT 2018, Blue Angel, TÜV Green Product Mark o di etichetta	, SI	TCO certified, EPEAT Silver
		equivalente)
	In caso di assenza di un etichetta ambientale di tipo I dovranno essere verificati i requisiti seguenti al posto del punto 2
	3	L'AEE è dotata di Etichetta EPA ENERGY STAR?	Si
Ex ante	In alternativa al punto 3, rispondere al punto 3.1
		E' disponibile una dichiarazione del produttore che attesti che il
	3.1	consumo tipico di energia elettrica (Etec), calcolato per ogni dispositivo offerto, non superi il TEC massimo necessario (Etec‐max)
		in linea con quanto descritto nell’Allegato III dei criteri GPP UE ?
	4	Nel libretto d’istruzione sono comprese istruzioni che spieghino come	SI
		ridurre al minimo il consumo di energia?
	5	L'offerente rende disponibili le parti di ricambio originali o equivalenti	SI
		(direttamente o tramite mandatari) per la durata di vita prevista

Pagina 1 di 5

POSDATA S.r.l.

Xxx Xxxxxx Xxxxx, 00 00000 Xxxxxxx

Tel. 000.000000

Xxx Xxxxxxxx xx Xxxxx, 00/X 00000 Xxxxxxxx (XX)

Tel. 0000.00000

P.IVA 01647390812

REA 237779

Cap. Sociale €. 1.000.000,00 i.v.

xxxx://xxx.xxxxxxx.xx xxxx@xxxxxxx.xx xxxxxxx@xxx.xx

		dell'apparecchiatura, per un periodo di almeno cinque anni oltre al periodo di garanzia?
	6	L'offerente fornisce le raccomandazioni per un'adeguata manutenzione del prodotto, comprese informazioni sulle parti di ricambio che possono essere sostituite, consigli per la pulizia?	SI
	7	Nel caso di server e prodotti di archiviazioni dati, è disponibile la dichiarazione dei produttori/fornitori di conformità alla seguente normativa: ecodesign (Regolamento (EU) 2019/424)?	SI
	8	Nel caso di computer fissi e display, è presente la marcatura di alloggiamenti e mascherine di plastica secondo gli standard ISO 11469 e ISO 1043?	SI
	9	Nel caso di fornitura di apparecchiature TIC ricondizionate/rifabbricate, è disponibile una delle certificazioni di sistema di gestione seguente: • ISO 9001 e ISO 14001 / regolamento EMAS (certificazione di sistema di gestione disponibile sotto accreditamento – il campo di applicazione della certificazione dovrà riportare lo specifico scopo richiesto); • EN 50614:2020 (qualora l'apparecchiatura sia stata precedentemente scartata come rifiuto RAEE, e preparata per il riutilizzo per lo stesso scopo per cui è stata concepita)?	N/A	Non applicabile in quanto non si tratta di fornitura di apparecchiature TIC ricondizionate o rifabbricate.
	10	E' disponibile una dichiarazione del produttore/fornitore di rispetto della seguente normativa: REACH (Regolamento (CE) n.1907/2006); RoHS (Xxxxxxxxx 2011/65/EU e s.m.i.); Compatibilità elettromagnetica (Direttiva 2014/30/UE e s.m.i.)?	SI
	11	Sono state indicate le limitazioni delle caratteristiche di pericolo dei materiali che si prevede utilizzare (Art. 57, Regolamento CE 1907/2006, REACH)?	N/A	Non applicabile in quanto non si tratta di fornitura di sostanze chimiche né di sostanza intermedie
	Alle apparecchiature per stampa, copia, multifunzione e servizi di Print&Copy si applica un requisito trasversale
	12	E' verificata la conformità alle specifiche tecniche e clausole contrattuali dei Criteri ambientali minimi “Affidamento del servizio di stampa gestita, affidamento del servizio di noleggio di stampanti e di apparecchiature multifunzione per ufficio e acquisto o il leasing di stampanti e di apparecchiature multifunzione per ufficio, approvato con DM 17 ottobre 2019, in G.U. n. 261 del 7 novembre 2019” ?	N/A	Non applicabile in quanto non si tratta di apparecchiature per stampa, copia, multifunzione e servizi di Print&Copy.

Firma digitale1 del legale rappresentante/procuratore2

Marina Noto

1 Per gli operatori economici italiani o stranieri residenti in Italia, la dichiarazione deve essere sottoscritta da un legale rappresentante ovvero da un procuratore2 del legale rappresentante, apponendo la firma digitale. Per gli operatori economici stranieri non residenti in Italia, la dichiarazione può essere sottoscritta dai medesimi soggetti apponendo la firma autografa ed allegando copia di un documento di identità del firmatario in corso di validità.

2 Nel caso in cui la dichiarazione sia firmata da un procuratore del legale rappresentante deve essere allegata copia conforme all’originale della procura oppure nel solo caso in cui dalla visura camerale dell’operatore economico risulti l’indicazione espressa dei poteri rappresentativi conferiti con la procura, la dichiarazione sostitutiva resa dal procuratore/legale rappresentante sottoscrittore attestante la sussistenza dei poteri rappresentativi risultanti dalla visura.

Pagina 2 di 5

POSDATA S.r.l.

Xxx Xxxxxx Xxxxx, 00 00000 Xxxxxxx

Tel. 000.000000

Xxx Xxxxxxxx xx Xxxxx, 00/X 00000 Xxxxxxxx (XX)

Tel. 0000.00000

P.IVA 01647390812

REA 237779

Cap. Sociale €. 1.000.000,00 i.v.

xxxx://xxx.xxxxxxx.xx xxxx@xxxxxxx.xx xxxxxxx@xxx.xx

APPENDICE: VINCOLI DNSH

Obiettivo: Mitigazione del cambiamento climatico

Criticità: Inefficienza energetica di prodotti elettronici di per sé molto energivore con conseguente produzione di emissioni di gas climalteranti.

Al fine di garantire il rispetto del principio DNSH connesso con la mitigazione dei cambiamenti climatici e la significativa riduzione di emissioni di gas a effetto serra, dovranno essere adottate tutte le strategie disponibili per l’acquisto di prodotti elettronici in linea con l’obbiettivo di contenere le emissioni GHG.

Elementi di verifica ex ante

• I prodotti elettronici acquistati sono dotati di un’etichetta ambientale di tipo I, secondo la UNI EN ISO 14024, ad esempio TCO Certified, EPEAT 2018, Blue Angel, TÜV Green Product Mark o di etichetta equivalente.

In alternativa è ammissibile uno dei seguenti elementi:

• Etichetta EPA ENERGY STAR;

• Dichiarazione del produttore che attesti che il consumo tipico di energia elettrica (Etec), calcolato per ogni dispositivo offerto, non superi il TEC massimo necessario (Etec‐max) in linea con quanto descritto nell’Allegato III dei criteri GPP UE.

• L’offerente deve assicurarsi che nel libretto d’istruzione siano comprese istruzioni che spieghino come ridurre al minimo il consumo di energia.

Obiettivo: Adattamento ai cambiament i climatici (Non pertinente)

Obiettivo: Uso sostenibile e protezione delle acque e delle risorse marine (Non pertinente)

Obiettivo: Economia circolare

Criticità: I materiali delle componenti utilizzate per la realizzazione del prodotto risultano difficilmente riciclabili; eccessiva produzione di rifiuti e gestione inefficiente degli stessi.

Le apparecchiature elettroniche acquistate, noleggiate e prese in leasing devono essere in linea con gli standard più aggiornati in termini di durabilità, riutilizzabilità, riciclabilità e corretta gestione dei rifiuti. La fase di progettazione del prodotto considera l'impatto ambientale durante il suo intero ciclo di vita facilitando il miglioramento dell prestazioni ambientali in modo economicamente efficace, anche in termini di efficienza delle risorse e dei materiali, e quindi contribuisce ad un uso sostenibile delle risorse naturali.

Elementi di verifica ex‐ante

e

Pagina 3 di 5

POSDATA S.r.l.

Xxx Xxxxxx Xxxxx, 00 00000 Xxxxxxx

Tel. 000.000000

Xxx Xxxxxxxx xx Xxxxx, 00/X 00000 Xxxxxxxx (XX)

Tel. 0000.00000

P.IVA 01647390812

REA 237779

Cap. Sociale €. 1.000.000,00 i.v.

xxxx://xxx.xxxxxxx.xx xxxx@xxxxxxx.xx xxxxxxx@xxx.xx

• Iscrizione alla piattaforma RAEE in qualità di produttore e/o distributore e/o fornitore;

• Etichetta ambientale di tipo I, secondo la UNI EN ISO 14024, che verifichi l’allineamento con il principio di non arrecare danno significativo all’economia circolare (es: EPEAT, Blauer Xxxxx, TCO Certified o altra etichetta equivalente).

In assenza di tale etichetta, è richiesto l’elemento di verifica seguente:

• Nel caso di server e prodotti di archiviazioni dati, dichiarazione dei produttori/fornitori di conformità alla seguente normativa: ecodesign (Regolamento (EU) 2019/424);

• Nel caso di computer fissi e display, marcatura di alloggiamenti e mascherine di plastica secondo gli standard ISO 11469 e ISO 1043.

Nel caso di fornitura di apparecchiature TIC ricondizionate/rifabbricate dovrà essere fornita una delle certificazioni di sistema di gestione seguente:

• ISO 9001 e ISO 14001/regolamento EMAS (certificazione di sistema di gestione disponibile sotto accreditamento – il campo di applicazione della certificazione dovrà riportare lo specifico scopo richiesto);

• EN 50614:2020 (qualora l'apparecchiatura sia stata precedentemente scartata come rifiuto RAEE, e preparata per il riutilizzo per lo stesso scopo per cui è stata concepita).

• L'offerente deve garantire la disponibilità di parti di ricambio originali o equivalenti (direttamente o tramite mandatari) per la durata di vita prevista dell'apparecchiatura, per un periodo di almeno cinque anni oltre al periodo di garanzia;

• L’offerente deve fornire raccomandazioni per un'adeguata manutenzione del prodotto, comprese informazioni sulle parti di ricambio che possono essere sostituite, consigli per la pulizia;

Obiettivo: Prevenzione e riduzione dell’inquinamento

Criticità: I materiali delle componenti utilizzate per la realizzazione del prodotto contengono sostanze inquinanti

Nella costruzione non potranno essere utilizzati componenti, prodotti e materiali contenenti sostanze estremamente preoccupanti.

Elementi di verifica ex‐ante

• Etichetta ambientale di tipo I, secondo la UNI EN ISO 14024, che verifichi l’allineamento con il principio di non arrecare danno significativo alla prevenzione e riduzione dell’inquinamento (es: EPEAT, Blauer Xxxxx, TCO Certified, o altra etichetta equivalente)

In assenza di tale etichetta, sono richieste:

Pagina 4 di 5

POSDATA S.r.l.

Xxx Xxxxxx Xxxxx, 00 00000 Xxxxxxx

Tel. 000.000000

Xxx Xxxxxxxx xx Xxxxx, 00/X 00000 Xxxxxxxx (XX)

Tel. 0000.00000

P.IVA 01647390812

REA 237779

Cap. Sociale €. 1.000.000,00 i.v.

xxxx://xxx.xxxxxxx.xx xxxx@xxxxxxx.xx xxxxxxx@xxx.xx

Obiettivo: Protezione e ripristino della biodiversità e degli Ecosistemi (Non pertinente)

• La conformità delle apparecchiature è verificata tramite una dichiarazione del produttore/fornitore di rispetto della seguente normativa: REACH (Regolamento (CE) n.1907/2006); RoHS (Xxxxxxxxx 2011/65/EU e s.m.i.); Compatibilità elettromagnetica (Direttiva 2014/30/UE e s.m.i.)

Pagina 5 di 5

POSDATA S.r.l.

Xxx Xxxxxx Xxxxx, 00 00000 Xxxxxxx

Tel. 000.000000

Xxx Xxxxxxxx xx Xxxxx, 00/X 00000 Xxxxxxxx (XX)

Tel. 0000.00000

P.IVA 01647390812

REA 237779

Cap. Sociale €. 1.000.000,00 i.v.

xxxx://xxx.xxxxxxx.xx xxxx@xxxxxxx.xx xxxxxxx@xxx.xx

ENERGY STAR CERTIFIED

Computers

Lenovo - ThinkStation P358 Tower

Specifications
ENERGY STAR Unique ID:	2395734
Brand Name:	Lenovo
Model Name:	ThinkStation P358 Tower
Model Number:	30GL
Type:	Workstation
Workstations: Processor Brand:	AMD
Workstations: Processor Name:	Ryzen 9 PRO 5945
Workstations: Operating System Name:	Windows 11,Windows 10,Ubuntu
Workstations: Base Processor Speed Per Core (GHz):	3.0
Workstations: System Memory (GB):	128
Workstations: Hard Drives (count):	3
Workstations: Off Mode (xxxxx):	0.6
Workstations: Sleep Mode (watts):	1.4
Workstations: Long Idle (xxxxx):	49.8
Workstations: Short Idle (watts):	51.7
Workstations: Weighted Power of Model (xxxxx):	28.6
Sleep Mode Default Time Upon Shipment (min.):	25
Display Sleep Mode Default Time Upon Shipment (min.):	10
WOL (Wake on LAN) From Sleep:	Shipped Enabled Under All Conditions
Will the Speed of Any Active 1 GB/s or Higher Ethernet Network Links be Reduced to Less Than 1 GB/s When Transitioning to Sleep or Off Mode?:	Yes
Ethernet Capability:	Yes
Date Available On Market:	2022-07-29
Date Certified:	2022-05-11
Markets:	United States, Switzerland, Taiwan, Japan, Canada
ENERGY STAR Certified:	Yes

Additional Model Information

ThinkStation P358 Tower, 30GK, 30GL, 30GM, 30GN;

UPC Codes

Captured On:

12/13/2022

ECMA/TC38-TG3/2015/026

(Rev. 1 – 15 April 2017)

Annex B2 - Product environmental attributes Desktop/All-in-One Computers

The declaration may be published only when all rows and/or fields marked with * are filled-in (n.a. for not applicable). Additional information regarding each item may be found under P15.

Brand *	Lenovo	Logo
Company name *	Lenovo
Contact information * e-mail address	Lenovo Global Environmental Affairs Xxxxx X Xxxxxx xxxxxxxx@xxxxxx.xxx
Internet site *	xxxx://xxx.xxxxxx.xxx/xxxxxx_xxxxxxxxxxxxxx/xx/xx/xxxxxxxxxxx.xxxx
Additional information	The latest version of this document can be found at: xxxx://xxx.xxxxxx.xxx/xxxxxxxxxxxxxx

The company declares (based on product specification or test results based obtained from sample testing), that the product conforms to the statements given in this declaration.
Type of product *	WS
Commercial name *	ThinkStation P358 Tower
Model number *	30GL, 30GK, 30GN, 30GM
Issue date *	2022/5/30
Intended market *	Global	Europe	Asia, Pacific & Japan	Americas	Other
Additional information

This is an uncontrolled copy when in printed form. Please refer to the contact information for the latest version.

About Annex B2

Annex B2 reflects Product environmental attributes relevant for Computers and Computer Monitors. The following items from the ECMA-370 Main body are not shown in the template:

P4.1 – P4.3 Consumable materials P9.1 TEC and Print speed

P10.2 - P10.3 Chemical emissions from printing products P11.1 - P11.3 Consumable materials for printing products.

Annex B1 of ECMA-370 5th edition 2015-04-02 Page 1 (10)

ECMA-370-Annex-B2 Lenovo Template 2016-09-23 Desktop_PC_AIO_incl ErP Lot 3 V8

Model number *	30GL, 30GK, 30GN, 30GM	Logo
Issue date *	2022/5/30
Product environmental attributes - Legal requirements Requirement met
Item Yes No n.a.
P1 Hazardous substances and preparations
P1.1* Products do comply with current European RoHS Directive. (See legal reference and NOTE B1)
P1.2* Products do not contain Asbestos (see legal reference). Comment: Legal reference has no maximum concentration value.
P1.3* Products do not contain Ozone Depleting Substances: Chlorofluorocarbons (CFC), hydrobromofluorocarbons (HBFC), hydrochlorofluorcarbons (HCFC), Halons, carbontetrachloride, 1,1,1- trichloroethane, methyl bromide (see legal reference). Comment: Legal reference has no maximum concentration values.
P1.4* Products do not contain more than; 0,005% polychlorinated biphenyl (PCB), 0,005% polychlorinated terphenyl (PCT) in preparations (see legal reference).
P1.5* Products do not contain more than 0,1% short chain chloroparaffins (SCCP) with 10-13 carbon atoms in the chain containing at least 48% per mass of chlorine in the SCCP (see legal reference).
P1.6* Parts with direct and prolonged skin contact do not release nickel in concentrations above 0,5μg/cm2/week (see legal reference). Comment: Max limit in legal reference when tested according to EN1811:2011-5.
P1.7* REACH Article 33 information about substances in articles is available at (add URL or mail contact): xxxxx://xxx.xxxxxx.xxx/xx/xx/Xxxxxx-XXXXX-XXXX-Xxxxxxxxxx
P2 Batteries
P2.1* If the product contains a battery or an accumulator, the battery/accumulator is labeled with the disposal symbol. Information on proper disposal is provided in user manual. (See legal reference)
P2.2* Batteries or accumulators do not contain more than 0,0005% of mercury or 0,002% of cadmium. (See legal reference)
P2.3* Batteries and accumulators are readily removable. (See legal reference)
P3 Conformity verification & Eco design (ErP)
P3.1* The product is CE-marked to show conformance with applicable legal requirements (see legal reference). The Declaration of Conformity can be requested at: xxxxx://xxx.xxxxxx.xxx/xx/xx/xxxxxxxxxx/xx-xxx
P3.2* The product complies with the Eco design requirements for energy-related products, (see legal reference). Required information is; given in item P15 or added to this document, available at: xxxxx://xxx.xxxxxx.xxx/xx/xx/xxxxxxxxxx/xxx-xxxxxxxxxxx
P5 Product packaging
P5.1* Packaging and packaging components do not contain more than 0,01% lead, mercury, cadmium and hexavalent chromium by weight of these together.
P5.2* The packaging materials are marked with abbreviations and numbers indicating the nature of the material(s) used (see legal reference).
P5.3* The product packaging material is free from ozone depleting substances as specified in the Montreal Protocol (see legal reference). Comment: Legal reference has no maximum concentration values.
P6 Treatment information
P6.1* Information for recyclers/treatment facilities is available (see legal reference).

NOTE B1 Restriction applies to the homogeneous material, unless other specified and expressed in weight %. Stating “Yes” means that the product is compliant with the mandatory requirements.

Model number *	30GL, 30GK, 30GN, 30GM	Logo
Issue date *	2022/5/30
Product environmental attributes - Market requirements (See General NOTE GN below) - Environmental conscious design Requirement met
Item *=mandatory to fill in. Additional information regarding each item may be found under P14. Yes No n.a.
P7 Design, Disassembly, recycling
P7.1* Parts that have to be treated separately are easily separable
P7.2* Plastic materials in covers/housing have no surface coating.
P7.3* Plastic parts > 100 g consist of one material or of easily separable materials.
P7.4* Plastic parts > 25 g have material codes according to ISO 11469 referring ISO 1043-4.
P7.5 Plastic parts are free from metal inlays or have inlays that can be removed with commonly available tools.
P7.6* Labels are easily separable. (This requirement does not apply to safety/regulatory labels).
	Product lifetime
P7.7* Upgrading can be done e.g. with processor, memory, cards or drives
P7.8* Upgrading can be done using commonly available tools
P7.9 Spare parts are available after end of production for: 5 years
P7.10 Service is available after end of production for: 5 years
	Material and substance requirements
P7.11* Product cover/housing material type (e.g. plastics, metal, aluminum): Material type: ABS Material type: Material type:
P7.12 Insulation materials of external electrical cables are PVC free.
P7.13 Insulation materials of internal electrical cables are PVC free.
P7.14 External plastic casing/cover parts > 25 g contain no more than 0,1% weight (1000 ppm) bromine and 0,1% weight (1000 ppm) chlorine attributable to brominated flame retardants, chlorinated flame retardants, and polyvinyl chloride or 0,3% weight (3000 ppm) bromine and 0,3% weight (3000 ppm) chlorine in parts containing more than 25% post-consumer recycled content.
P7.15 Printed circuit boards, PCBs (without components) are low halogen: all PCBs > 25 g are low halogen as defined in IEC 00000-0-00. (See 1NOTE B2)
P7.16 Flame retarded plastic parts > 25 g in covers / housings are marked according ISO 1043-4: Marking: >ABS <
P7.17 Alt. 1: Chemical specifications of flame retardants in printed circuit boards > 25 g (without components): TBBPA (additive), TBBPA (reactive) (See NOTE B3), Other: , CAS #: 79-94-7 Alt. 2: Chemical specifications of flame retardants in printed circuit boards (without components) > 25 g according ISO 1043-4:
P7.18 Alt. 1: Flame retarded plastic parts > 25 g contain the following flame retardant substances/preparations in concentrations above 0,1%: 1. Chemical name: , CAS #: (See NOTE B4) 2. Chemical name: , CAS #: “ 3. Chemical name: , CAS #: “ Alt. 2: Chemical specifications of flame retardants in plastic parts > 25 g according ISO 1043-4:
P7.19 In plastic parts > 25 g, flame retardant substances/preparations above 0,1% are used which have been assigned the following Risk phrases; and Hazard statements: The source(s) for these classifications is/are found at (add URL(s)): , (See note B5)
P7.20* Postconsumer recycled plastic material content is used in the product (See Note B6): If YES; at least one of the two alternatives below shall be answered; a) Of total plastic parts’ weight > 25 g, the postconsumer recycled plastic material content (calculated as a percentage of total plastic by weight) is 33.51%. or b) The weight of recycled material is 247.1 g.

GENERAL NOTE Standard references should direct to the latest version of a standard. If an older version of a standard is used, section P15 shall be used for explanation.

NOTE B2 IEC 00000-0-00 defines maximum limits of 900 ppm for each of the substances chlorine and bromine and a maximum limit of 1500ppm of these substances combined. The standard does not address fluorine, iodine and astatine which are included in the group of halogens.

NOTE B3 and B4 A Guidance document on Chemical substances is available; see xxxx://xxx.xxxx-xxxxxxxxxxxxx.xxx/xxxxxxxxxxxx/xxxxxxxxx/Xxxx-000.xxx

NOTE B5 If a certain substance has been assigned a certain risk phrases / hazard statement in the referenced source, this does not necessarily mean the substance has been tested for all of the hazards referred to by a certain customer.

NOTE B6 Applies to a product containing plastic parts whose combined weight exceeds 100 g with the exception of printed circuit boards, cables, connectors and electronic components and bio-based plastic material.

Model number *	30GL, 30GK, 30GN, 30GM	Logo
Issue date *	2022/5/30
Product environmental attributes - Market requirements (continued) Requirement met
Item Yes No n.a.

	Material and substance requirements (continued)
P7.21*	Biobased plastic material content is used in the product (See NOTE B7): If YES; at least one of the two alternatives below shall be answered; a) Of total plastic parts’ weight > 25 g, the biobased plastic material content (calculated as a percentage of total plastic by weight) is %. or b) The weight of the biobased plastic material is g.
P7.22*	Light sources are free from mercury, i.e. less than 0,1 mg/lamp. If mercury is used specify: Number of lamps: and maximum mercury content per lamp: mg
P8	Batteries
P8.1*	Battery chemical composition:
P9	Energy consumption (See NOTE B8)
P9.1	For the product the following power levels or energy consumptions are reported:
Energy mode *	Power level at 100 V AC	Power level at 115 V AC	Power level at 230 V AC	Reference/Standard for energy modes and test method *
Peak (On-max)	W	W	W	Full load
Category
Short Idle State - WOL Enabled	51.74 W	51.67 W	50.52 W	Use for ENERGY STAR V8 registration (Pidle)
Long Idle State - WOL Enabled	50.01 W	49.76 W	49.55 W	Use for ENERGY STAR V8 registration (Pidle)
Sleep (S3) - WOL Enabled	1.43 W	1.42 W	1.37 W	Use for ENERGY STAR V8 registration (Psleep)
Off (S5) - WOL Enabled	0.62 W	0.62 W	0.67 W	Use for ENERGY STAR V8 registration (Poff)
Off (S5) - WOL Disabled	W	W	0.61 W	Use for ErP
EPS No-load (External power supply / charger plugged in the wall outlet but disconnected from the product.)	W	W	W
PTEC * Typical Energy Consumption	28.67 W	28.6 W	28.14 W
ETEC * Annual Energy Consumption	kWh/year	kWh/year	kWh/year	ETEC = (8760/1000) x (Poff x 0.45 + Psleep x 0.05 + Plong_Idle x 0.15+ Pshort_Idle x 0.35)
	Poff: Off Mode(S5) - WOL Enabled; Psleep: Sleep Mode(S3) - WOL Enabled; P idle: Idle State - WOL Enabled
External Power Supply Efficiency Level (International Efficiency Marking Protocol) * : N/A
Display resolution * : N/A megapixels
Default time to enter energy save mode: 25 minutes
P9.2*	Information about the energy save function is provided with the product.
P9.3	Energy efficiency class (monitors only):
P10	Emissions
	Noise emission – Declared according to ISO 9296 (See NOTE B9)
P10.1	Mode	Mode description		Statistical upper limit A-weighted sound power level, LWA,c (B)
	Idle	* HDD:Idle		* 2.9
	Operation	* HDD: Operating		* 4
	Other mode	Declared A-weighted sound pressure level (dBL)(A)		20 (operator position desktop – idle)
	Other mode	Declared A-weighted sound pressure level (dBL)(A)		30 (operator position desktop – HDD operating )
	Measured according to: ISO 7779 ECMA-74

NOTE B7 The following is to be excluded from the calculation of percentage: printed circuit boards, labels, cables, connectors and electronic components and postconsumer recycled plastic

NOTE B8 A Guidance document on Energy Efficiency is available;

see xxxx://xxx.xxxx-xxxxxxxxxxxxx.xxx/xxxxxxxxxxxx/xxxxxxxxx/Xxxx-000.xxx

NOTE B9 A Guidance document on Acoustic Noise is available;

see xxxx://xxx.xxxx-xxxxxxxxxxxxx.xxx/xxxxxxxxxxxx/xxxxxxxxx/Xxxx-000.xxx

(only if not covered by ECMA-74)

Other

Model number *	30GL, 30GK, 30GN, 30GM	Logo
Issue date *	2022/05/30
Product environmental attributes - Market requirements (continued) Requirement met
Item Yes No n.a.
	Electromagnetic emissions
P10.4 Computer display meets the requirement for low frequency electromagnetic fields of the following voluntary program(s):
P12 Ergonomics for computing products
P12.1* The display meets the ergonomic requirements of ISO 9241-307 for visual display technologies.
P12.2* The physical input device meets the requirements of ISO 9995 and ISO 9241-410.
P13 Packaging and documentation
P13.1* Product packaging material type(s): Cardboard weight (kg): 1.155 Product packaging material type(s): EPE weight (kg): 0.317 Product packaging material type(s): PE weight (kg): 0.054
P13.2* Product plastic primary packaging is free from PVC.
P13.3* For product primary corrugated fiberboard packaging, specify the contained percentage of minimum post- consumer recovered fiber content: 90 %
P13.4* Specify media for user and product documentation (tick box): Electronic, Paper, Other
P13.5 (Please only complete this item if paper documentation used) User and product documentation on paper media is chlorine-free: If Yes, please specify: Totally chlorine-free Elemental chlorine-free Processed chlorine-free
P14 Voluntary programs
P14.1 The product meets the requirements of the following voluntary program(s): ENERGY STAR® Criteria version: 8.0 Date: 2022/1/17 Product category: Workstation Eco-label: EPEAT Criteria version: 2018 Date: 2022/02/22 Product category: Workstation Eco-label: Criteria version: Date: Product category:
P15 Additional information (See NOTE B10)
P9 Energy consumption of specific configuration may vary; description of the tested product configuration:
NOTE: Supplier makes no representations, guarantees, assurances or warranties whether express or implied, regarding the information contained in this document. All information provided by supplier in this document is provided based on supplier’s knowledge available at the time of completion, and supplier shall have no obligation to update such information. The information provided here is approximate and provided for informational purposes only. See a Lenovo Account Representative for more information.
P9 See Energy Star Qualified Notebooks & Tablet Computers for the latest information: xxxx://xxx.xxxxxxxxxx.xxx/xxxxx.xxx?xxxxxxxxxxxxxxx_x_xxxxxxx.xxxxXxxxxxxXxxxx&xxx_xxxxxXX

NOTE B10 Additional lines may be inserted to declare further items, by positioning the cursor at the far right of the row and hitting the <Enter> key.

Legal references Europe Annex B2

Reference	Declaration item
Directive 2011/65/EU (RoHS Directive) * * S pecific exemptions apply for certain products and a p p l i c a t i o n s .	P1.1
Regulation (EC) 1907/2006(REACH, Annex XVII	P1.2, P1.4, P1.6, P1.7
Regulation (EC) 2037/2000, 2038/2000, 2039/2000 (Marketing and use of Ozone layer depleting substances)	P1.3, P5.3
Norwegian regulation relating to restrictions on the use of certain dangerous chemicals 20.12.2002	P1.5
Directive 2013/56/EC (Battery and accumulators Directive) * * These provisions shall not apply where, for safety, performance, medical or data integrity reasons, continuity of power supply is necessary and requires a permanent connection between the appliance and the battery or a c c u m u l a t.o r	P2.1, P2.2, P2,3, P8.1
Directive 2006/95/EC (Low Voltage Directive)	P3.1
Directive 2004/108/EC (EMC Directive)	P3.1
Directive 1999/5/EC (R&TTE Directive)	P3.1
Regulation (EC) 801/2013 amending Regulation (EC) No 1275/2008 with regard to ecodesign requirements for standby, off mode electric power consumption of electrical and electronic household and of fice equipment, and amending Regulation (EC) No 642/2009 with regard to ecodesign requirements for televisions	P3.1, P3.2
R e g u l a t i （o nEC ） No 1272/2008 (CLP Regulation)	P7.19
Directive 2004/12/EC (Packaging Directive)	P5.1
Decision 97/129/EC (Secondary packaging legislation)	P5.2
Directive 2012/19/EU (WEEE directive)	P6.1

Lenovo ErP Lot3 Information Sheet

- PC / Notebook -

As required by COMMISSION REGULATION (EU) No 617/2013 of 26 June 2013 implementing Directive 2009/125/EC of the European Parliament and of the Council with regard to ecodesign requirements for computers and computer servers (ErP Lot3).

Products scope of this sheet:

Desktop computer, integrated desktop computer, and notebook computer

This document is only valid in connection with the IT Eco Declaration of the specific Product.

Commercial name	ThinkStation P358 Tower	Logo
Model Number	30GL, 30GK, 30GN, 30GM
Issue Date	2022/05/30
Additional information

P7.1.1 Product environmental attributes

(d) year of manufacture:

2022

(e) Etec value (kWh) per ErP Lot 3 Category and capability adjustments applied when all discrete graphics cards (dGfx) are disabled and if the system is tested with switchable graphics mode with UMA driving the display. (f) Etec value (kWh) per ErP Lot 3 Category and capability adjustments applied when all discrete graphics cards (dGfx) are enable

Category A (according to ErP Lot 3)

Category B (according to ErP Lot 3)

Category C (according to ErP Lot 3)

Category (according to ErP

D Lot

3)

capability adjustments applied during testing

Memory over base [GB]

Additional internal storage

(Yes / No)

(Yes / No)

(Yes / No)

(Yes / No)

Discrete television tuner

(Yes / No)

(Yes / No)

(Yes / No)

(Yes / No)

Discrete Audio Card

(Yes / No)

(Yes / No)

(Yes / No)

(Yes / No)

Discrete graphics Card(s) [number / #]

(Yes / No)

#:

(Yes / No)

#:

(Yes / No)

#:

(Yes / No)

#:

Category of discrete graphics Card(s)

Test results

Etec Value (kWh) - dGfx disabled all discrete graphics cards (dGfx) are disabled/ UMA is active for switchable graphics/ product has no graphics cards (dGfx)

Etec Value (kWh) - dGfx enabled all discrete graphics cards (dGfx) are enabled

(g) Idle state power demand (Xxxxx);

50.65

(h) Sleep mode power demand (Xxxxx);

NA

(i) Sleep mode with WOL enabled power demand (Watts) (where enabled);

1.34

(j) Off mode power demand (Xxxxx);

NA

(k) Off mode with WOL enabled power demand (Xxxxx) (where enabled);

0.61

(l) Internal power supply efficiency at 10 %, 20 %, 50 % and 100 % of rated output power (if applicable): PCK010-EL1G: 10% 90.72% 20% 92.57% 50% 93.57% 100% 90.38% Average 92.17% HK600-11PP: 10% 90.34% 20% 93.03% 50% 92.35% 100% 89.32% Average 91.57% PA-3751-1VA-ROHS: 10% 85.35% 20% 93.34% 50% 93.15% 100% 90.57% Average 92.35% HK850-53PP: 10% 90.04% 20% 92.73% 50% 92.44% 100% 89.71% Average 91.63% PCK023-EL1G: 10% 86.72% 20% 88.93% 50% 90.76% 100% 88.24% Average 89.31%

(m) External power supply efficiency (if applicable)*: Average active efficiency: N/A *internal note: show values for all available external power supplies

(o) Minimum number of loading cycles that the batteries can withstand (applies only to notebook computers): N/A

(p-1) Measurement methodology used to determine information mentioned in points (l) – internal PSU efficiency:

Generalized Test Protocol for Calculating the Energy Efficiency of Internal Ac-Dc and Dc-Dc Power Supplies Revision 6.6

(p-2) Measurement methodology used to determine information mentioned in points (m) – external PSU efficiency:

N/A

(p-3) Measurement methodology used to determine information mentioned in points (o) – loading cycles batteries:

N/A

(p-4) Measurement methodology used to determine information mentioned in maximum, idle, sleep, off mode power as defined in Point P9.1 in the Product IT Eco Declaration:

IEC 62623 Ed. 1.0, 2012-10

(q) Sequence of steps for achieving a stable condition with respect to power demand:

Based on user manual/Power on->Wait 5 minutes->Stable condition

(r) Description of how sleep and/or off mode was selected or programmed:

Based on user manual-Set power button behaviors

(s) Sequence of events required to reach the mode where the equipment automatically changes to sleep and/or off mode:

Based on user manual/Control Panel->Power Options-> Change Settings-> Restore default settings for this plan

(t) Duration of idle state condition before the computer automatically reaches sleep mode, or another 25

condition which does not exceed the applicable power demand requirements for sleep mode (in minutes):

(u) Length of time after a period of user inactivity in which the computer automatically reaches a power NA

mode that has a lower power demand requirement than sleep mode (in minutes):

(v) Length of time before the display sleep mode is set to activate after user inactivity (in minutes): 10

(w) Information on the energy-saving potential of power management functionality:

Based on user manual

(x) User information on how to enable the power management functionality:

Based on user manual

(z) Test parameters for measurements: — test voltage in V and frequency in Hz, — total harmonic distortion of the electricity supply system, — information and documentation on the instrumentation, set-up and circuits used for electrical testing:

Test voltage in V and frequency in Hz: 230V/50Hz

Total harmonic distortion of the electricity supply sy≦st2e%m:

Additional Notebook Battery Information:

Instrument Name	Range Used or ******	Make and Model**
AC Power Source	1~300VAC;1~550Hz; 1000VA	NF; EC1000S
Power Meter	1~500V;0~20A	YOKOGAWA; WT310
Digital Watch	Full Range	CASIO; HS-70W
Ambient Monitor	-10~60℃; 0~100&RH	Testo; 622
Anemometer	0~20m/s	Testo; 425

	Battery[ies] not user replaceable The battery[ies] in this product cannot be easil replaced by users themselves. 1)	Battery[ies] user replaceable y	n/a
Internal/built-in Battery
External/detachable Battery
Bios Backup Battery
Other:
Additional information

1)

The battery[ies] in this product cannot be easily replaced by users themselves.

Акумулаторната[ите] батерия[и] в този продукт не може да се замени[ят] лесно от самите потребители. Las baterías de este producto no pueden ser sustituidas fácilmente por los propios usuarios.

Výměnu baterie/baterií v tomto výrobku by neměli provádět sami uživatelé. Brugeren kan ikke uden videre udskifte batteriet/batterierne i dette produkt.

Der Akku/die Akkus dieses Produkts kann/können nicht ohne weiteres vom Benutzer selbst ausgetauscht werden. Kasutajad ei saa selle toote akut/akusid ise hõlpsasti asendada.

Η μπαταρία[-ες] στο προϊόν αυτό δεν μπορούν να αντικατασταθούν εύκολα από τους ίδιους τους χρήστες

La/les batterie(s présente(s) dans ce produit ne peuvent être facilement remplacée(s) par les utilisateurs eux-mêmes. Korisnik ne može lako zamijeniti Bateriju sam u ovom proizvodu.

La batteria/le batterie in questo prodotto non può/possono essere facilmente sostituita/e dall’utente. Lietotāji paši nevar nomainīt šā ražojuma akumulatoru(-us).

Šio gaminio baterijos [baterijų] pats vartotojas negali lengvai pakeisti.

A termék akkumulátorát/akkumulátorait a felhasználó nem tudja egyedül egyszerűen kicserélni. Il-batterija/batteriji f’dan il-prodott ma tistax/jistgħux tiġi/jiġu sostitwita/i mill-utenti stess.

Batteriet [ene] i dette produktet kan ikke lett erstattes av brukerne selv.

De batterij(en) in dit product is (zijn) door de gebruiker niet gemakkelijk vervangbaar. Użytkownik nie może sam w łatwy sposób wymienić baterii w tym produkcie.

A ou as baterias deste produto não podem ser facilmente substituídas pelos próprios utilizadores. Bateria (bateriile) din acest produs nu poate (pot) fi ușor înlocuită (înlocuite) de utilizatorii înșiși. Batériu(-ie) v tomto výrobku nemôže vymieňať používateľ.

Baterij/baterije v tem izdelku uporabniki sami ne morejo zlahka zamenjati. Tämän tuotteen akku [akut] ei[vät] ole helposti käyttäjän vaihdettavissa. Det är inte enkelt för kunden att själv byta ut batteriet/batterierna.

Bu üründeki batarya(lar) kullanıcılar tarafından kolaylıkla değiştirilemez.

Lenovo (Singapore) Pte. Ltd. 151 Xxxxxx Xxxxx,

#02-01, New Tech Park,

Singapore, 556741

(Tel - 00-0000-0000 & Fax- 00-0000-0000)

EU Declaration of Conformity

For the ThinkStation P358 Tower Series Workstation Computer

Machine Type: 30GL, 30GK, 30GN, 30GM

We, Lenovo (Singapore) P te Ltd, declare under sole responsibi lity that the above products , manufactured for:

Lenovo PC HK Limited.

00/X, Xxxxxxx Xxxxx, Xxxxxx Xxxxx 000 Xxxx'x Xxxx,

Quarry Bay, Hong Kong

to which this declaration re lates, is in conformi ty w ith the requirements of the follow ing EU Directive s:

• Directive 2014/53/EU on the harmonisation of the laws of the Member Stat es relating to the making available on the market of radio equipment.

• Directive 2009/125/EC establishing a framework for the setting of Ecodesign requirements for Energy-related products.

• Council Directive 2011/65/EU on the restriction of the use of certain hazardous substances in electrical and electronic equipment as amended by Directive 2015/863/EU.

The conformity assessment procedure referred to in Article 17.4a of Directive 2014/53/EU has been fo llowed and performed with the involvement of a Notified Body, in accordance w ith Article 3.2:

Notified Body Name/number : Nemko North America, lnc. /1622 Issued the EU-type examination certificate: 1622-RED-465558

The Technical Documentation (TD), relevant to the product d escribed above and which support this DoC is available from the EU contact address on thi s Doc.

Signed:__~__./ Dat e: 24th June 2022

Xxxxxx Xxxx (Executiv e Director)

Place of issue: Lenovo (Singapor e) Pte Ltd.

European Contact for regulatory topics only:

Lenovo (Slovakia), Xxxxxxxxxxx 00, 000 00 Xxxxxxxxx x, Xxxxxxxx

Tel: x000 0 0000 0000

1 / 2

Lenovo (Singapore) Pte. Ltd. 151 Xxxxxx Xxxxx,

#02-01, New Tech Park,

Singapore, 556741

(Tel - 00-0000-0000 & Fax- 00-0000-0000)

StandardsReferences

The following harmonized standards and normative documents are tho se to which the product' s conformance is declared, and by specific reference to the essential requirements of the referenced Directives:

RE Directive Article 3.l(a) (Safety & Health)

EN 62368-1 2014+A11:2017 ✓

EN IEC62311 2020 ✓

Article 3.l(b)	EN 55032	:	2015+All:2020	✓
(EMC)
	EN IEC 00000-0-0	:	2019+Al:2021	✓
	EN 00000-0-0	:	2013+Al :2019	✓
	EN 55035	:	2017+Al :l2020	✓
	EN 301489 -1		V2.2.3 2019- 11	✓
	EN 301489-3		V2.1.l 2019-03	✓
	EN 301 489-17		V3.2.4 2020-09	✓

		Wireless module Inside
		WlANw ith Sluetooth
Article 3.2 (Radio Spectrum)	EN 300 328 V2.2.2 2019-07	✓
	EN 301893 V2.1.1 2017-05	✓
	EN 300 440 V2.2.1 2018-07	✓

RoHS Directive ErP Directive

EN 50581:2012 EN IEC 63000:2018 ✓

EC 617/2013 ErP - Class B ✓

Wirelessmodules

Wireless moduleinside	MODEL
WLAN with Bluetooth	MT7921

European Contact for regulatory topics only:

Lenovo (Slovakia), Xxxxxxxxxxx 00, 000 00 Xxxxxxxxxx, Xxxxxxxx

Tel: x000 0 0000 0000

2/2

Lenovo Accessibility Conformance Re Revised Section 508 Edition

VPAT® Version 2.3 – December 2018

Name of Product/Version: ThinkStation P358 (TWR) Product Description: Workstation computer

See OS VPAT for operating system information on appropriate manufacturer’s website. See software VPATs for so

Date: 30 September 2022

Contact information: xxxxxxxxxx@Xxxxxx.xxx Evaluation Methods Used:

Manual testing is performed on hardware products using a number of different tools to evaluate access by users with disabili brightness, contrast, color chromaticity tools are used to ensure contrast, a force gauge is used to evaluate key button force. operation is evaluated alongside stylus and other tools that are used to evaluate use without tight pinching or grasping. Mea used to measure operable controls while audio meters are used to measure volume and gain. Connection ports are evaluate connection points are available. Any transducers designed to be held to the ear are evaluated by an outside laboratory for co coupling standards. Additional tests are performed based on applicable features of the product.

“Voluntary Product Accessibility Template” and “VPAT” are registered

service marks of the Information Technology Industry Council (ITI) Page 1 of 12

Applicable Standards/Guidelines

This report covers the degree of conformance for the following accessibility standard/guidelines:

Standard/Guideline	Included In Repo
Web Content Accessibility Guidelines 2.0, at xxxx://xxx.x0.xxx/XX/0000/XXX‐ WCAG20‐20081211/	Level A (No Level AA (No Level AAA (N
Revised Section 508 standards as published by the U.S. Access Board in the Federal Register on January 18, 2017 Corrections to the ICT Final Rule as published by the US Access Board in the Federal Register on January 22, 2018	(Yes)

Terms

The terms used in the Conformance Level information are defined as follows:

• Supports: The functionality of the product has at least one method that meets the criterion without equivalent facilitation.

• Partially Supports: Some functionality of the product does not meet the criterion.

• Does Not Support: The majority of product functionality does not meet the criterion.

• Not Applicable: The criterion is not relevant to the product.

• Not Evaluated: The product has not been evaluated against the criterion. This can be used only in

Page 2 of 12

Revised Section 508 Report

Chapter 3: Functional Performance Criteria (FPC)

Criteria	Conformance Level	Rem Expl
		Touch
		disting
		activati
		other t
		audibly
302.1 Without Vision. Where a visual mode of operation is provided, ICT shall provide at least one mode of operation that does not require user vision.	Supports	the op Functio only ha appear
		inform
		other p
		announ
		level as
302.2 With Limited Vision. Where a visual mode	Supports	All key with go on a da to iden keys wi
of operation is provided, ICT shall provide at
least one mode of operation that enables users
to make use of limited vision.
302.3 Without Perception of Color. Where a visual mode of operation is provided, ICT shall provide at least one visual mode of operation that does not require user perception of color.	Supports	Color a meanin

Page 3 of 12

Criteria	Conformance Level	Rem Expl
302.4 Without Hearing. Where an audible mode of operation is provided, ICT shall provide at least one mode of operation that does not require user hearing.	Supports	When system applica needed
302.5 With Limited Hearing. Where an audible mode of operation is provided, ICT shall provide at least one mode of operation that enables users to make use of limited hearing.	Supports	Hardw control can be
302.6 Without Speech. Where speech is used for input, control, or operation, ICT shall provide at least one mode of operation that does not require user speech.	Supports	User sp
302.7 With Limited Manipulation. Where a manual mode of operation is provided, ICT shall provide at least one mode of operation that does not require fine motor control or simultaneous manual operations.	Supports	Contro and op minima mobilit
302.8 With Limited Reach and Strength. Where a manual mode of operation is provided, ICT shall provide at least one mode of operation that is operable with limited reach and limited strength.	Supports	Contro and op minima mobilit can be
302.9 With Limited Language, Cognitive, and Learning Abilities. ICT shall provide features making its use by individuals with limited cognitive, language, and learning abilities simpler and easier.	Supports	All key or char light sy Touch c disting activati

Page 4 of 12

Chapter 4: Hardware

Criteria	Conformance Level	Rem Expl
402 Closed Functionality	Heading cell – no response required	Headin
402.1 General	Heading cell – no response required	Headin
402.2 Speech-Output Enabled	Heading cell – no response required	Headin
402.2.1 Information Displayed On‐Screen	Not Applicable	Not clo
402.2.2 Transactional Outputs	Not Applicable	Not clo
402.2.3 Speech Delivery Type and Coordination	Not Applicable	Not clo
402.2.4 User Control	Not Applicable	Not clo
402.2.5 Braille Instructions	Not Applicable	Not clo
402.3 Volume	Heading cell – no response required	Headin
402.3.1 Private Listening	Not Applicable	Not clo
402.3.2 Non‐private Listening	Not Applicable	Not clo
402.4 Characters on Display Screens	Not Applicable	Not clo
402.5 Characters on Variable Message Signs	Not Applicable	Not clo
403 Biometrics	Heading cell – no response required	Headin
403.1 General. Where provided, biometrics shall not be the only means for user identification or control.	Supports	Where authen authen
404 Preservation of Information Provided for Accessibility	Heading cell – no response required	Headin
404.1 General. ICT that transmits or converts information or communication shall not remove non‐proprietary information provided for accessibility or shall restore it upon delivery.	Supports	Accessi preserv
405 Privacy	Heading cell – no response required	Headin

Page 5 of 12

Criteria	Conformance Level	Rem Expl
405.1 General. The same degree of privacy of input and output shall be provided to all individuals. When speech output required by 402.2 is enabled, the screen shall not blank automatically.	Supports	Speech combin screen ensure
406 Standard Connections	Heading cell – no response required	Headin
406.1 General. Where data connections used for input and output are provided, at least one of each type of connection shall conform to industry standard non‐proprietary formats.	Supports	The pr ports s assistiv accom
407 Operable Parts	Heading cell – no response required	Headin
407.2 Contrast. Where provided, keys and controls shall contrast visually from background surfaces. Characters and symbols shall contrast visually from background surfaces with either light characters or symbols on a dark background or dark characters or symbols on a light background.	Supports	All key or char light sy
407.3 Input Controls	Heading cell – no response required	Headin
407.3.1 Tactilely Discernible. Input controls shall be operable by touch and tactilely discernible without activation.	Supports	Touch disting activati
407.3.2 Alphabetic Keys. Where provided, individual alphabetic keys shall be arranged in a QWERTY‐based keyboard layout and the “F” and “J” keys shall be tactilely distinct from the other keys.	Supports	Keyboa nubs to keyboa can be touchs
407.3.3 Numeric Keys. Where provided, numeric keys shall be arranged in a 12‐key ascending or descending keypad layout. The number five key shall be tactilely distinct from the other keys. Where the ICT provides an alphabetic overlay on numeric keys, the relationships between letters and digits shall conform to ITU‐T Recommendation E.161 (incorporated by reference, see 702.7.1).	Supports	Numer ascend numeri key has keyboa

Page 6 of 12

Criteria	Conformance Level	Rem Expl
407.4 Key Repeat. Where a keyboard with key repeat is provided, the delay before the key repeat feature is activated shall be fixed at, or adjustable to, 2 seconds minimum.	Supports	When an opti is provi accom
407.5 Timed Response. Where a timed response is required, the user shall be alerted visually, as well as by touch or sound, and shall be given the opportunity to indicate that more time is needed.	Supports	When system display includi
407.6 Operation. At least one mode of operation shall be operable with one hand and shall not require tight grasping, pinching, or twisting of the wrist. The force required to activate operable parts shall be 5 pounds (22.2 N) maximum	Supports	Contro and op minima mobilit can be
407.7 Tickets, Fare Cards, and Keycards. Where tickets, fare cards, or keycards are provided, they shall have an orientation that is tactilely discernible if orientation is important to further use of the ticket, fare card, or keycard.	Not applicable
407.8 Reach Height and Depth	Heading cell – no response required	Headin
407.8.1 Vertical Reference Plane	Not applicable
407.8.1.1 Vertical Plane for Side Reach	Not applicable
407.8.1.2 Vertical Plane for Forward Reach	Not applicable
407.8.2 Side Reach	Not applicable
407.8.2.1 Unobstructed Side Reach	Not applicable
407.8.2.2 Obstructed Side Reach	Not applicable

Page 7 of 12

Criteria	Conformance Level	Rem Expl
407.8.3 Forward Reach	Not applicable
407.8.3.1 Unobstructed Forward Reach	Not applicable
407.8.3.2 Obstructed Forward Reach	Not applicable
407.8.3.2.1 Operable Part Height for ICT with Obstructed Forward Reach	Not applicable
407.8.3.2.2 Knee and Toe Space under ICT with Obstructed Forward Reach	Not applicable
408 Display Screens	Heading cell – no response required	Headin
408.2 Visibility. Where stationary ICT provides one or more display screens, at least one of each type of display screen shall be visible from a point located 40 inches (1015 mm) above the floor space where the display screen is viewed.	Not applicable
408.3 Flashing. Where ICT emits lights in flashes, there shall be no more than three flashes in any one‐second period.	Supports	The us elemen of seizu epileps
409 Status Indicators	Heading cell – no response required	Headin
409.1 General. Where provided, status indicators shall be discernible visually and by touch or sound.	Supports	When system sound to dupl exampl Toggle SCROLL the Eas
410 Color Coding	Heading cell – no response required	Headin
410.1 General. Where provided, color coding shall not be used as the only means of conveying information, indicating an action, prompting a response, or distinguishing a visual element.	Supports	Color a meanin

Page 8 of 12

Criteria	Conformance Level	Rem Expl
411 Audible Signals	Heading cell – no response required	Headin
411.1 General. Where provided, audible signals or cues shall not be used as the only means of conveying information, indicating an action, or prompting a response	Supports	When system applica needed
412 ICT with Two-Way Voice Communication	Heading cell – no response required	Headin
412.2 Volume Gain	Heading cell – no response required	Headin
412.2.1 Volume Gain for Wireline Telephones	Not Applicable
412.2.2 Volume Gain for Non‐Wireline ICT	Supports	When system control
412.3 Interference Reduction and Magnetic Coupling	Heading cell – no response required	Headin
412.3.1 Wireless Handsets	Not Applicable
412.3.2 Wireline Handsets	Not Applicable
412.4 Digital Encoding of Speech	Not Applicable
412.5 Real‐Time Text Functionality	Not Applicable	Reserv
412.6 Caller ID	Not Applicable
412.7 Video Communication	Not Applicable
412.8 Legacy TTY Support	Heading cell – no response required	Headin
412.8.1 TTY Connectability	Not Applicable
412.8.2 Voice and Hearing Carry Over	Not Applicable
412.8.3 Signal Compatibility	Not Applicable

Page 9 of 12

Criteria	Conformance Level	Rem Expl
412.8.4 Voice Mail and Other Messaging Systems	Not Applicable
413 Closed Caption Processing Technologies	Heading cell – no response required	Headin
413.1.1 Decoding and Display of Closed Captions. Players and displays shall decode closed caption data and support display of captions.	Not Applicable
413.1.2 Pass‐Through of Closed Caption Data. Cabling and ancillary equipment shall pass through caption data.	Not Applicable
414 Audio Description Processing Technologies	Heading cell – no response required	Headin
414.1.1 Digital Television Tuners	Not Applicable
414.1.2 Other ICT	Not Applicable
415 User Controls for Captions and Audio Descriptions	Heading cell – no response required	Headin
415.1.1 Where ICT provides operable parts for volume control, ICT shall also provide operable parts for caption selection.	Not Applicable
415.1.2 Audio Description Controls. Where ICT provides operable parts for program selection, ICT shall also provide operable parts for the selection of audio description.	Not Applicable

Chapter 5: Software – see Software VPAT

Notes: This is a hardware VPAT, see software VPAT for OS and other software applications.

Chapter 6: Support Documentation and Services

Criteria	Conformance Level	Remarks and Explanation
601.1 Scope	Heading cell – no response required	Heading cell – no response required
602 Support Documentation	Heading cell – no response required	Heading cell – no response required

Page 10 of 12

Criteria	Conformance Level	Remarks and Explanation
602.2 Accessibility and Compatibility Features. Documentation shall list and explain how to use the accessibility and compatibility features required by Chapters 4 and 5. Documentation shall include accessibility features that are builtin and accessibility features that provide compatibility with assistive technology.	Supports	Product documentation is available online xxxxx://xxx.xxxxxx.xxx/xxxxxxx
		VPATs are available at xxxxx://xxx.xxxxxx.xxx/xx/xx/xxxxxxxx
		602.3 Electronic Support Documentation. Documentation in electronic format, including Web‐based self‐service support, shall conform to Level A and Level AA Success Criteria and Conformance Requirements in WCAG 2.0 (incorporated by reference, see 702.10.1).	Supports	The electronic web‐based product docume Level AA Success Criteria and Conformance
602.4 Alternate Formats for Non‐Electronic Support Documentation. Where support documentation is only provided in nonelectronic formats, alternate formats usable by individuals with disabilities shall be provided upon request.	Not Applicable	Documentation is available in electronic fo
603 Support Services	Heading cell – no response required	Heading cell – no response required
603.2 Information on Accessibility and Compatibility Features. ICT support services shall include information on the accessibility and compatibility features required by 602.2.	Supports	Lenovo Support provides information on a features. This information is also documen Accessibility Features page xxxxx://xxx.xxxxxx.xxx/xx/xx/xxxxxx/x

Page 11 of 12

Criteria	Conformance Level	Remarks and Explanation
603.3 Accommodation of Communication Needs. Support services shall be provided directly to the user or through a referral to a point of contact. Such ICT support services shall accommodate the communication needs of individuals with disabilities.	Supports	Lenovo Services provides communications Telecommunications Relay Service (TRS) i deaf or hard of hearing. For support, contact 0-000-0-XXXXXX (0-000-000-0000).

Lenovo Legal Disclaimer

This document is for informational purposes only. THE INFORMATION PROVIDED IN THIS DOCUMENT IS PROVIDED "AS I ANY KIND, EXPRESSED OR IMPLIED. Supporting features apply to product families as a whole. The information shall not be for purposes of any warranty of compliance with product specifications in a given contract or order. For information on third part contact the software manufacturer. Lenovo may make changes to the information in this document or to the products described without notice.

Page 12 of 12

ENERGY STAR CERTIFIED

Displays

Lenovo - E24-** : F20238FE*

Specifications
ENERGY STAR Unique ID:	2394887
Brand Name:	Lenovo
Model Name:	E24-**
Model Number:	F20238FE*
Product Type:	Monitor
Panel Type:	IPS LCD; VA LCD
Screen Size (inches):	23.8
Screen Area (square inches):	242.18
Native Resolution (pixels):	1080 x 1920
Maximum Luminance (candelas per square meter):	263.5
Total Native Resolution (megapixels):	2.1
Model Features:	None
Signal or Data Interfaces:	Display
Power Source:	Ac to dc internal power supply
Monitor Total Energy Consumption at 115 Volts (kWh/yr):	42.34
On Mode Power (watts):	13.4
Markets:	United States, Switzerland, Taiwan, Japan, Canada
Sleep Mode Power (watts):	0.22
Off Mode Power (watts):	0.21
Tiled Display System:	No
ENERGY STAR Certified:	Yes
ENERGY STAR Most Efficient:	No

Additional Model Information

T24s-**,,

UPC Codes

Captured On:

09/25/2023

ECMA/TC38-TG3/2015/026

(Rev. 1 – 15 April 2015)

Annex B2 - Product environmental attributes

Computer monitors

The declaration may be published only when all rows and/or fields marked with * are filled-in (n.a. for not applicable). Additional information regarding each item may be found under P15.

Brand *	Lenovo	Logo
Company name *	Lenovo
Contact information * e-mail address	Lenovo Global Environmental Affairs Xxxxx X Xxxxxx xxxxxxxx@xxxxxx.xxx
Internet site *	xxxxx://xxx.xxxxxx.xxx/xx/xx/xxxxxxxxxxxxxx-xxxxxxxxx/
Additional information	The latest version of this document can be found at: xxxx://xxx.xxxxxx.xxx/xxxxxxxxxxxxxx

The company declares (based on product specification or test results based obtained from sample testing), that the prod conforms to the statements given in this declaration.
Type of product *	Monitor
Commercial name *	Lenovo Thinkvision E24-28 / Lenovo L24-28
Model number *	62B6, 62B8, 66EA, 66EB, 62C7, 62C8
Issue date *	2020/12/15, updated 2021/11/11, updated 2022/03/04,
Intended market *	Global	Europe	Asia, Pacific & Japan	Americas	Other
Additional information

uct

This is an uncontrolled copy when in printed form. Please refer to the contact information for the latest version.

About Annex B2

Annex B2 reflects Product environmental attributes relevant for Computers and Computer Monitors. The following items fro ECMA-370 Main body are not shown in the template:

P4.1 – P4.3 Consumable materials P9.1 TEC and Print speed

P10.2 - P10.3 Chemical emissions from printing products P11.1 - P11.3 Consumable materials for printing products.

Annex B1 of ECMA-370th5edition 2015-04-02 Page 1 (6

)

ECMA-370-Annex-B2 Lenovo Template 2016-09-23 Monitors

Model number *		62B6, 62B8, 66EA, 66EB, 62C7, 62C8	Logo
Issue	date *	2020/12/15, updated 2021/11/11, updated 2022/03/04
Product environmental attributes - Legal requirements Requirement met
Item	Yes No n.a.
P1	Hazardous substances and preparations
P1.1*	Products do comply with current European RoHS Directive. (See legal reference and NOTE B1)
P1.2*	Products do not contain Asbestos (see legal reference). Comment: Legal reference has no maximum concentration value.
P1.3*	Products do not contain Ozone Depleting Substances: Chlorofluorocarbons (CFC), hydrobromofluorocarbons (HBFC), hydrochlorofluorcarbons (HCFC), Halons, carbontetrachloride, 1,1,1- trichloroethane, methyl bromide (see legal reference). Comment: Legal reference has no maximum concentration values.
P1.4*	Products do not contain more than; 0,005% polychlorinated biphenyl (PCB), 0,005% polychlorinated terphenyl (PCTi)n preparations (see legal reference).
P1.5*	Products do not contain more than 0,1% short chain chloroparaffins (SCCP) with 10-13 carbon atoms in the chain containing at least 48% per mass of chlorine in the SCCP (see legal reference).
P1.6*	Parts with direct and prolonged skin contact do not release nickel in concentrations abo2v/wee0e,5k g/cm (see legal reference). Comment: Max limit in legal reference when tested according to EN1811:2011-5.
P1.7*	REACH Article 33 information about substances in articles is available at (add URL or mail contact): xxxxx://xxx.xxxxxx.xxx/xx/xx/Xxxxxx-XXXXX-XXXX-Xxxxxxxxxx
P2	Batteries
P2.1*	If the product contains a battery or an accumulator, the battery/accumulator is labeled with the disposal symbol. Information on proper disposal is provided in user manual. (See legal reference)
P2.2*	Batteries or accumulators do not contain more than 0,0005% of mercury or 0,002% of cadmium. (See legal reference)
P2.3*	Batteries and accumulators are readily removable. (See legal reference)
P3	Conformity verification & Eco design (ErP)
P3.1*	The product is CE-marked to show conformance with applicable legal requirements (see legal reference). The Declaration of Conformity can be requested at (add link or e-mail address): xxxxx://xxx.xxxxxx.xxx/xx/xx/xxxxxxxxxx/xx-xxx
P3.2*	The product complies with the Eco design requirements for energy-related products, (see legal reference). Required information is; given in item P15 or added to this document, available at (add URL): xxxxx://xxx.xxxxxx.xxx/xx/xx/xxxxxxxxxx/xxx-xxxxxxxxxxx
P5	Product packaging
P5.1*	Packaging and packaging components do not contain more than 0,01% lead, mercury, cadmium and hexavalent chromium by weight of these together.
P5.2*	The packaging materials are marked with abbreviations and numbers indicating the nature of the material(s) used (see legal reference).
P5.3*	The product packaging material is free from ozone depleting substances as specified in the Montreal Protocol (see legal reference). Comment: Legal reference has no maximum concentration values.
P6	Treatment information
P6.1*	Information for recyclers/treatment facilities is available (see legal reference).

NOTE B1 Restriction applies to the homogeneous material, unless other specified and expressed in weight %. Stating “Yes” means that the product is compliant with the mandatory requirements.

Model number *	62B6, 62B8, 66EA, 66EB, 62C7, 62C8	Logo
Issue date *	2020/12/15, updated 2021/11/11, updated 2022/03/04
Product environmental attributes - Market requirements (See General NOTE GN below) - Environmental conscious design Requirement met
Item *=mandatory to fill in. Additional information regarding each item may be found under P14. Yes No n.a.
P7 Design Disassembly, recycling
P7.1* Parts that have to be treated separately are easily separable
P7.2* Plastic materials in covers/housing have no surface coating.
P7.3* Plastic parts > 100 g consist of one material or of easily separable materials.
P7.4* Plastic parts > 25 g have material codes according to ISO 11469 referring ISO 1043-4.
P7.5 Plastic parts are free from metal inlays or have inlays that can be removed with commonly available tools.
P7.6* Labels are easily separable. (This requirement does not apply to safety/regulatory labels).
	Product lifetime
P7.7* Upgrading can be done e.g. with processor, memory, cards or drives
P7.8* Upgrading can be done using commonly available tools
P7.9 Spare parts are available after end of production for: 5 years
P7.10 Service is available after end of production for: 5 years
	Material and substance requirements
P7.11* Product cover/housing material type (e.g. plastics, metal, aluminum): Material type: ABS Material type: SGCC Material type:
P7.12 Insulation materials of external electrical cables are PVC free.
P7.13 Insulation materials of internal electrical cables are PVC free.
P7.14 External plastic casing/cover parts > 25 g contain no more than 0,1% weight (1000 ppm) bromine and 0,1% weight (1000 ppm) chlorine attributable to brominated flame retardants, chlorinated flame retardants, and polyvinyl chloride or 0,3% weight (3000 ppm) bromine and 0,3% weight (3000 ppm) chlorine in parts containing more than 25% post-consumer recycled content.
P7.15 Printed circuit boards, PCBs (without components) are low halogePnC: aBlsl > 25 g are low halogen as defined in IEC 00000-0-00. (See 1NOTE B2)
P7.16 Flame retarded plastic parts > 25 g in covers / housings are marked according ISO 1043-4: Marking:
P7.17 Alt. 1: Chemical specifications of flame retardants in printed circuit boards > 25 g (without components): TBBPA (additive), TBBPA (reactive) (See NOTE B),3 Other: P , CAS #: 00000-00-0 Alt. 2: Chemical specifications of flame retardants in printed circuit boards (without components) > 25 g according ISO 1043-4:
P7.18 Alt. 1: Flame retarded plastic parts > 25 g contain the following flame retardant substances/preparations in concentrations above 0,1%: 1. Chemical name: , CAS #: (See NOTE B4) 2. Chemical name: , CAS #: “ 3. Chemical name: , CAS #: “ Alt. 2: Chemical specifications of flame retardants in plastic parts > 25 g according ISO 1043-4:
P7.19 In plastic parts > 25 g, flame retardant substances/preparations above 0,1% are used which have been assigned the following Risk phrases; and Hazard statements: The source(s) for these classifications is/are found at (add URL(s)): , (See note B5)
P7.20* Postconsumer recycled plastic material content is used in the product (See Note B6): If YES; at least one of the two alternatives below shall be answered; a) Of total plastic parts’ weight > 2th5egp, ostconsumer recycled plastic material content (calculated as a percentage of total plastic by weight) is 85%. or b) The weight of recycled material is 751 g.

GENERAL NOTE Standard references should direct to the latest version of a standard. If an older version of a standard is used, section P15 shall be used for explanation.

NOTE B2 IEC 00000-0-00 defines maximum limits of 900 ppm for each of the substances chlorine and bromine and a maximum limit of 1500ppm of these substances combined. The standard does not address fluorine, iodine and astatine which are included in the group of halogens.

NOTE B3 and B4 A Guidance document on Chemical substances is available; see xxxx://xxx.xxxx-xxxxxxxxxxxxx.xxx/xxxxxxxxxxxx/xxxxxxxxx/Xxxx-000.xxx

NOTE B5 If a certain substance has been assigned a certain risk phrases / hazard statement in the referenced source, this does not necessarily mean the substance has been tested for all of the hazards referred to by a certain customer.

NOTE B6 Applies to a product containing plastic parts whose combined weight exceeds 100 g with the exception of printed circuit boards, cables, connectors and electronic components and bio-based plastic material.

Model number *	62B6, 62B8, 66EA, 66EB, 62C7, 62C8	Logo
Issue date *	2020/12/15, updated 2021/11/11, updated 2022/03/04
Product environmental attributes - Market requirements (continued) Requirement met
Item	Yes			No	n.a.

	Material and substance requirements (continued)
P7.21*	Biobased plastic material content is used in the product (See NOTE B7): If YES; at least one of the two alternatives below shall be answered; a) Of total plastic parts’ weight > 25 g, the biobased plastic material content (calculated as a total plastic by weight) is 0%. or b) The weight of the biobased plastic material is 0g.
P7.22*	Light sources are free from mercury, i.e. less than 0,1 mg/lamp. If mercury is used specify: Number of lamps: and maximum mercury content per lamp:
P8	Batteries
P8.1*	Battery chemical composition:
P9	Energy consumption (See NOTE B8)
P9.1	For the product the following power levels or energy consumptions are reported:
Energy mode *	Power level at 100 V AC	Power level at 115 V AC	Power level at 230 V AC	Reference/Standardfor energy modes and test method *
Peak (On-max)	11.66 W	11.80 W	11.85 W	Full load
Category ---
Sleep (S3) - WOL Enabled	0.17 W	0.18 W	0.26 W	Use for ENERGY STAR V6 registration(Psleep)
Off (S5) - WOL Enabled	0.16 W	0.17 W	0.25 W	Use for ENERGY STAR V6 registration(Poff)
PTEC * Typical Energy Consumptio	W n	W	W
ETEC * Annual Energy Consumptio	36.73 nkWh/year	37.18 kWh/ye	ar 37.81 kWh/year
	External Power Supply Efficiency Level (International Efficiency Marking Protocol) * :
Display resolution * : 1920 x 1080 megapixels
Default time to enter energy save mode: minutes
P9.2*	Information about the energy save function is provided with the product.
P9.3	Energy efficiency class (monitors only): D
P10	Emissions
	Noise emission – Declared according to ISO 9296 (See NOTE B9)
P10.1	Mode	Mode description		Statistical upper limit A-weighted sound power WleAv,ce(Bl,)L
	Idle	*		*
	Operation	*		*
	Other mode	Declared A-weighted sound pressure level (dBL) pAm		(operator position desktop – idle)
	Other mode	Declared A-weighted sound pressure level (dBL) pAm		(operator position desktop – operatin)g
	Measured according to: ISO 7779 ECMA-74 Other (only if not covered by ECMA-74)

perce

ntage

of

mg

NOTE B7 The following is to be excluded from the calculation of percentage: printed circuit boards, labels, cables, connectors and electronic components and postconsumer recycled plastic

NOTE B8 A Guidance document on Energy Efficiency is available;

see xxxx://xxx.xxxx-xxxxxxxxxxxxx.xxx/xxxxxxxxxxxx/xxxxxxxxx/Xxxx-000.xxx

NOTE B9 A Guidance document on Acoustic Noise is available;

see xxxx://xxx.xxxx-xxxxxxxxxxxxx.xxx/xxxxxxxxxxxx/xxxxxxxxx/Xxxx-000.xxx

Model number *	62B6, 62B8, 66EA, 66EB, 62C7, 62C8	Logo
Issue date *	2020/12/15, updated 2021/11/11, updated 2022/03/04
Product environmental attributes - Market requirements (continued) Requirement met
Item	Yes No n.a.
	Electromagnetic emissions
P10.4	Computer display meets the requirement for low frequency electromagnetic fields of the following voluntary program(s):
P12	Ergonomics for computing products
P12.1*	The display meets the ergonomic requirements of ISO 9241-307 for visual display technologies.
P12.2*	The physical input device meets the requirements of ISO 9995 and ISO 9241-410.
P13	Packaging and documentation
P13.1*	Product packaging material type(s): carton bwoexight (kg): 0.7 Product packaging material type(s): EPS fronwt eight (kg): 0.1 Product packaging material type(s): EPS bacwk eight (kg): 0.26
P13.2*	Product plastic primary packaging is free from PVC.
P13.3*	For product primary corrugated fiberboard packaging, specify the contained percentage of minimum post- consumer recovered fiber content: 90 %
P13.4*	Specify media for user and product documentation (tick box): Electronic, Paper, Other
P13.5	(Please only complete this item if paper documentation used) User and product documentation on paper media is chlorine-free: If Yes, please specify: Totally chlorine-free Elemental chlorine-free Processed chlorine-free
P14	Voluntary programs
P14.1	The product meets the requirements of the following voluntary program(s): ENERGY STAR® Criteria version: 8.0 Date: 2020/10/28 Product category: Displays Eco-label: TCO Criteria version: 8.0 Date: 2020/10/28 Product category: Displays Eco-label: EPEAT Criteria version: 1680.1- Date: 2020/10/28 Product category: Displays 2018
P15	Additional information (See NOTE B10)
P9	Energy consumption of specific configuration may vary; description of the tested product configuration:
NOTE: Supplier makes no representations, guarantees, assurances or warranties whether express or implied, rega information contained in this document. All information provided by supplier in this document is provided based o knowledge available at the time of completion, and supplier shall have no obligation to update such information. T provided here is approximate and provided for informational purposes only. See a Lenovo Account Representative information.
P9	See Energy Star Qualified Notebooks & Tablet Computers for the latest information: xxxx://xxx.xxxxxxxxxx.xxx/xxxxx.xxx?xxxxxxxxxxxxxxx_x_xxxxxxx.xxxxXxxxxxxXxxxx&xxx_xxxxxXX

rding the n supplier’ he inform for more

NOTE B10 Additional lines may be inserted to declare further items, by positioning the cursor at the far right of the row and hitting the <Enter> key.

Legal references Europe Annex B2

Reference	Declaration item
Directive 2011/65/EU (RoHS Directive) * * S p ecific exemptio ns apply for c ertai n products and a p p l i c a t i o n s .	P1.1
Regulation (EC) 1907/2006(REACH, Annex XVII	P1.2, P1.4, P1.6, P1.7
Regulation (EC) 2037/2000, 2038/2000, 2039/2000 (Marketing and use of Ozone layer depleting substances)	P1.3, P5.3
Norwegian regulation relating to restrictions on the use of certain dangerous chemicals 20.12.2002	P1.5
Directive 2013/56/EC (Battery and accumulators Directive) * * Thes e prov is ions shall not apply where, for safety, perform ance, medic al or data int egrity reaso ns, c ont inuit y of power su pply is necessary and requi res a permanent connection betwe en the ap pliance and the batt ery or a c c u m u l a. t o r	P2.1, P2.2, P2,3, P8.1
Directive 2006/95/EC (Low Voltage Directive)	P3.1
Directive 2004/108/EC (EMC Directive)	P3.1
Directive 1999/5/EC (R&TTE Directive)	P3.1
Regulation (EC) 801/2013 amending Regulation (EC) No 1275/2008 with regard to ecodesign requirements for standby, off mode electric power consumption of electrical and electronic household and office equipment, and amending Regulation (EC) No 642/2009 with regard to ecodesign requirements for televisions	P3.1, P3.2
Regulation （ EC ） No 1272/2008 (CLP Regulation)	P7.19
Directive 2004/12/EC ( Packaging Directive)	P5.1
Decision 97/129/EC (Secondary packaging legislation)	P5.2
Directive 2012/19/EU (WEEE directive)	P6.1