Common use of Additional Data Requirements Clause in Contracts

Additional Data Requirements. Seller shall comply with the telemetry parameters set forth in the Meteorological Data Requirements table below and meet the meteorological data requirements pursuant to the CAISO’s Business Practice Manual for Direct Telemetry. Prior to Commercial Operation Date, if the Facility uses a technology type identified in the table below, Seller shall demonstrate to Buyer’s reasonable satisfaction that Seller has installed equipment capable of complying with the requirements of this Section 2. Meteorological Data Requirements Technology Type Telemetry Parameters Units Accuracy Solar Photovoltaic Back Panel Temperature ˚C ± 1⁰ Global Horizontal Irradiance W/m2 ± 25 W/m² Plane of Array Irradiance (If PV is fixed) Direct Normal Irradiance (If PV is Tracking) W/m2 ± 25 W/m² Wind Speed m/s ± 1 m/s Peak Wind Speed (Within 1 minute) m/s ± 1 m/s Wind Direction Degrees ± 5⁰ Ambient Air Temperature ˚C ± 1⁰ Dewpoint Air Temperature ˚C ± 1⁰ Horizontal Visibility m -- Precipitation (Rain Rate) mm/hr -- Precipitation (Running 30 day total) mm -- Barometric Pressure Hecto Pascals (HPa) ± 60 Pa Solar Thermal or Solar Trough Global Horizontal Irradiance W/m2 ± 25 W/m² Plane of Array Irradiance (If PV is fixed) Direct Normal Irradiance (If PV is Tracking) W/m2 ± 25 W/m2 Wind Speed m/s ± 1 m/s Peak Wind Speed (Within 1 minute) m/s ± 1 m/s Wind Direction Degrees ± 5⁰ Ambient Air Temperature ˚C ± 1⁰ Dewpoint Air Temperature ˚C ± 1⁰ Horizontal Visibility m -- Precipitation (Rain Rate) mm/hr -- Precipitation (Running 30 day total) mm -- Barometric Pressure Hecto Pascals (HPa) ± 60 Pa Wind Wind Speed m/s ± 1 m/s Peak Wind Speed (Within 1 minute) m/s ± 1 m/s Wind Direction Degrees ± 5⁰ Wind Speed Standard Deviation -- -- Meteorological Data Requirements Wind Direction Standard Deviation -- -- Barometric Pressure Hecto Pascals (HPa) ± 60 Pa Ambient Temperature ˚C ± 1⁰ *** End of Appendix F *** PRODUCTION DAMAGES

Additional Data Requirements. Seller shall comply with the telemetry parameters set forth in the Meteorological Data Requirements table below and meet the meteorological data requirements pursuant to the CAISO’s Business Practice Manual for Direct Telemetry. Prior to Commercial Operation Date, if the Facility uses a technology type identified in the table below, Seller shall demonstrate to Buyer’s reasonable satisfaction that Seller has installed equipment capable of complying with the requirements of this Section 2. Meteorological Data Requirements Technology Type Telemetry Parameters Units Accuracy Solar Photovoltaic Back Panel Temperature ˚C ± 1⁰ Global Horizontal Irradiance W/m2 ± 25 W/m² Plane of Array Irradiance (If PV is fixed) Direct Normal Irradiance (If PV is Tracking) W/m2 ± 25 W/m² Wind Speed m/s ± 1 m/s Peak Wind Speed (Within 1 minute) m/s ± 1 m/s Wind Direction Degrees ± 5⁰ Ambient Air Temperature ˚C ± 1⁰ Dewpoint Air Temperature ˚C ± 1⁰ Horizontal Visibility m -- Precipitation (Rain Rate) mm/hr -- Precipitation (Running 30 day total) mm -- Barometric Pressure Hecto Pascals (HPa) ± 60 Pa Solar Thermal or Solar Trough Global Horizontal Irradiance W/m2 ± 25 W/m² Plane of Array Irradiance (If PV is fixed) Direct Normal Irradiance (If PV is Tracking) W/m2 ± 25 W/m2 Wind Speed m/s ± 1 m/s Peak Wind Speed (Within 1 minute) m/s ± 1 m/s Wind Direction Degrees ± 5⁰ Ambient Air Temperature ˚C ± 1⁰ Dewpoint Air Temperature ˚C ± 1⁰ Horizontal Visibility m -- Precipitation (Rain Rate) mm/hr -- Precipitation (Running 30 day total) mm -- Barometric Pressure Hecto Pascals (HPa) ± 60 Pa Wind Wind Speed m/s ± 1 m/s Peak Wind Speed (Within 1 minute) m/s ± 1 m/s Wind Direction Degrees ± 5⁰ Wind Speed Standard Deviation -- -- Meteorological Data Requirements Deviation Wind Direction Standard Deviation -- -- Barometric Pressure Hecto Pascals (HPa) ± 60 Pa Ambient Temperature ˚C ± 1⁰ *** End of Appendix F *** PRODUCTION DAMAGES

Additional Data Requirements. Seller shall comply with the telemetry parameters set forth in the Meteorological Data Requirements table below and meet the meteorological data requirements pursuant to the CAISO’s Business Practice Manual for Direct Telemetry. Prior to Commercial Operation Date, if the Facility uses a technology type identified in the table below, Seller shall demonstrate to Buyer’s reasonable satisfaction that Seller has installed equipment capable of complying with the requirements of this Section 2. Meteorological Data Requirements Technology Type Telemetry Parameters Units Accuracy Solar Photovoltaic Back Panel Temperature ˚C ± 1⁰ Global Horizontal Irradiance W/m2 ± 25 W/m² Plane of Array Irradiance (If PV is fixed) Direct Normal Irradiance (If PV is Tracking) W/m2 ± 25 W/m² Wind Speed m/s ± 1 m/s Peak Wind Speed (Within 1 minute) m/s ± 1 m/s Wind Direction Degrees ± 5⁰ Ambient Air Temperature ˚C ± 1⁰ Dewpoint Air Temperature ˚C ± 1⁰ Horizontal Visibility m -- Precipitation (Rain Rate) mm/hr -- Precipitation (Running 30 day total) mm -- Barometric Pressure Hecto Pascals (HPa) ± 60 Pa Solar Thermal or Solar Trough Global Horizontal Irradiance W/m2 ± 25 W/m² Plane of Array Irradiance (If PV is fixed) Direct Normal Irradiance (If PV is Tracking) W/m2 ± 25 W/m2 Wind Speed m/s ± 1 m/s Peak Wind Speed (Within 1 minute) m/s ± 1 m/s Wind Direction Degrees ± 5⁰ Ambient Air Temperature ˚C ± 1⁰ Dewpoint Air Temperature ˚C ± 1⁰ Horizontal Visibility m -- Precipitation (Rain Rate) mm/hr -- Precipitation (Running 30 day total) mm -- Barometric Pressure Hecto Pascals (HPa) ± 60 Pa Wind Wind Speed m/s ± 1 m/s Peak Wind Speed (Within 1 minute) m/s ± 1 m/s Wind Direction Degrees ± 5⁰ Wind Speed Standard Deviation -- -- Meteorological Data Requirements Wind Direction Standard Deviation -- -- Barometric Pressure Hecto Pascals (HPa) ± 60 Pa Ambient Temperature ˚C ± 1⁰ *** End of Appendix F *** PRODUCTION DAMAGESDAMAGES Appendix G – Guaranteed Energy Production Damages In accordance with the provisions in Section 12.2, GEP Damages means the liquidated damages payment due by Seller to Buyer, calculated as follows: [(A-B) X (C-D)] Where: A = the Guaranteed Energy Production for the Performance Measurement Period, in MWh B = Sum of Delivered Energy over the Performance Measurement Period, in MWh C = Replacement price for the Performance Measurement Period, in $/MWh, reflecting the sum of (a) the simple average of the simple average of the Day Ahead Integrated Forward Market hourly price, as published by the CAISO, for the Existing Zone Generation Trading Hub, in which the Project resides, plus (b) $50/MWh D = the unweighted Contract Price for the Performance Measurement Period, in $/MWh The Parties agree that in the above calculation of GEP Damages, the result of “(C-D)” shall not be less than $20/MWh and shall be no greater than seventy five percent (75%) of the Contract Price (in $/MWh). *** End of Appendix G *** Appendix H – Form of Letter of Credit‌ Issuing Bank Letterhead and Address STANDBY LETTER OF CREDIT NO. Date: [insert issue date] Beneficiary: Pacific Gas and Electric Company Applicant: [Insert name and address of Applicant] 00 Xxxxx Xxxxxx, Mail Code B28L San Francisco, CA 94105 Attention: Credit Risk Management Letter of Credit Amount: [insert amount] Expiry Date: [insert expiry date] Ladies and Gentlemen: By order of [insert name of Applicant] (“Applicant”), we hereby issue in favor of Pacific Gas and Electric Company (the “Beneficiary”) our irrevocable standby letter of credit No. [insert number of letter of credit] (“Letter of Credit”), for the account of Applicant, for drawings up to but not to exceed the aggregate sum of U.S. $ _[insert amount in figures followed by (amount in words)] (“Letter of Credit Amount”). This Letter of Credit is available with [insert name of issuing bank, and the city and state in which it is located] by sight payment, at our offices located at the address stated below, effective immediately, and it will expire at our close of business on [insert expiry date] (the “Expiry Date”). Funds under this Letter of Credit are available to the Beneficiary against presentation of the following documents (which may be presented by physical delivery or by facsimile, e-mail or other electronic transmission):

Additional Data Requirements. Seller shall comply with the telemetry parameters set forth in the Meteorological Data Requirements table below and meet the meteorological data requirements pursuant to the CAISO’s Business Practice Manual for Direct Telemetry. Prior to Commercial Operation Date, if the Facility uses a technology type identified in the table below, Seller shall demonstrate to Buyer’s reasonable satisfaction that Seller has installed equipment capable of complying with the requirements of this Section 2. Meteorological Data Requirements Technology Type Telemetry Parameters Units Accuracy Solar Photovoltaic Back Panel Temperature ˚C ± 1⁰ Global Horizontal Irradiance W/m2 ± 25 W/m² Plane of Array Irradiance (If PV is fixed) Direct Normal Irradiance (If PV is Tracking) W/m2 ± 25 W/m² Wind Speed m/s ± 1 m/s Peak Wind Speed (Within 1 minute) m/s ± 1 m/s Wind Direction Degrees ± 5⁰ Ambient Air Temperature ˚C ± 1⁰ Dewpoint Air Temperature ˚C ± 1⁰ Horizontal Visibility m -- Precipitation (Rain Rate) mm/hr -- Precipitation (Running 30 day total) mm -- Barometric Pressure Hecto Pascals (HPa) ± 60 Pa Solar Thermal or Solar Trough Global Horizontal Irradiance W/m2 ± 25 W/m² Plane of Array Irradiance (If PV is fixed) Direct Normal Irradiance (If PV is Tracking) W/m2 ± 25 W/m2 Wind Speed m/s ± 1 m/s Peak Wind Speed (Within 1 minute) m/s ± 1 m/s Wind Direction Degrees ± 5⁰ Ambient Air Temperature ˚C ± 1⁰ Dewpoint Air Temperature ˚C ± 1⁰ Horizontal Visibility m -- Precipitation (Rain Rate) mm/hr -- Precipitation (Running 30 day total) mm -- Barometric Pressure Hecto Pascals (HPa) ± 60 Pa Wind Wind Speed m/s ± 1 m/s Peak Wind Speed (Within 1 minute) m/s ± 1 m/s Wind Direction Degrees ± 5⁰ Wind Speed Standard Deviation -- -- Meteorological Data Requirements Wind Direction Standard Deviation -- -- Barometric Pressure Hecto Pascals (HPa) ± 60 Pa Ambient Temperature ˚C ± 1⁰ *** End of Appendix F *** PRODUCTION DAMAGESDAMAGES Appendix G – Guaranteed Energy Production Damages‌ In accordance with the provisions in Section 12.2, GEP Damages means the liquidated damages payment due by Seller to Buyer, calculated as follows: [(A-B) X (C-D)] Where: A = the Guaranteed Energy Production for the Performance Measurement Period, in MWh B = Sum of Delivered Energy over the Performance Measurement Period, in MWh C = Replacement price for the Performance Measurement Period, in $/MWh, reflecting the sum of (a) the simple average of the simple average of the Day Ahead Integrated Forward Market hourly price, as published by the CAISO, for the Existing Zone Generation Trading Hub, in which the Project resides, plus (b) $50/MWh D = the unweighted Contract Price for the Performance Measurement Period, in $/MWh The Parties agree that in the above calculation of GEP Damages, the result of “(C-D)” shall not be less than $20/MWh and shall be no greater than seventy five percent (75%) of the Contract Price (in $/MWh). *** End of Appendix G *** Appendix H – Form of Letter of Credit‌ Issuing Bank Letterhead and Address STANDBY LETTER OF CREDIT NO. Date: [insert issue date] Beneficiary: Pacific Gas and Electric Company Applicant: [Insert name and address of Applicant] 00 Xxxxx Xxxxxx, Mail Code B28L San Francisco, CA 94105 Attention: Credit Risk Management Letter of Credit Amount: [insert amount] Expiry Date: [insert expiry date] Ladies and Gentlemen: By order of [insert name of Applicant] (“Applicant”), we hereby issue in favor of Pacific Gas and Electric Company (the “Beneficiary”) our irrevocable standby letter of credit No. [insert number of letter of credit] (“Letter of Credit”), for the account of Applicant, for drawings up to but not to exceed the aggregate sum of U.S. $ _[insert amount in figures followed by (amount in words)] (“Letter of Credit Amount”). This Letter of Credit is available with [insert name of issuing bank, and the city and state in which it is located] by sight payment, at our offices located at the address stated below, effective immediately, and it will expire at our close of business on [insert expiry date] (the “Expiry Date”). Funds under this Letter of Credit are available to the Beneficiary against presentation of the following documents (which may be presented by physical delivery or by facsimile, e-mail or other electronic transmission):

Additional Data Requirements. Seller shall comply with the telemetry parameters set forth in the Meteorological Data Requirements table below and meet the meteorological data requirements pursuant to the CAISO’s Business Practice Manual for Direct Telemetry. Prior to Commercial Operation Date, if the Facility uses a technology type identified in the table below, Seller shall demonstrate to Buyer’s reasonable satisfaction that Seller has installed equipment capable of complying with the requirements of this Section 2. Meteorological Data Requirements Technology Type Telemetry Parameters Units Accuracy Solar Photovoltaic Back Panel Temperature ˚C ± 1⁰ Global Horizontal Irradiance W/m2 ± 25 W/m² Plane of Array Irradiance (If PV is fixed) Direct Normal Irradiance (If PV is Tracking) W/m2 ± 25 W/m² Wind Speed m/s ± 1 m/s Peak Wind Speed (Within 1 minute) m/s ± 1 m/s Wind Direction Degrees ± 5⁰ Ambient Air Temperature ˚C ± 1⁰ Dewpoint Air Temperature ˚C ± 1⁰ Horizontal Visibility m -- Precipitation (Rain Rate) mm/hr -- Precipitation (Running 30 day total) mm -- Barometric Pressure Hecto Pascals (HPa) ± 60 Pa Solar Thermal or Solar Trough Global Horizontal Irradiance W/m2 ± 25 W/m² Plane of Array Irradiance (If PV is fixed) Direct Normal Irradiance (If PV is Tracking) W/m2 ± 25 W/m2 Wind Speed m/s ± 1 m/s Peak Wind Speed (Within 1 minute) m/s ± 1 m/s Wind Direction Degrees ± 5⁰ Ambient Air Temperature ˚C ± 1⁰ Dewpoint Air Temperature ˚C ± 1⁰ Horizontal Visibility m -- Precipitation (Rain Rate) mm/hr -- Precipitation (Running 30 day total) mm -- Barometric Pressure Hecto Pascals (HPa) ± 60 Pa Wind Wind Speed m/s ± 1 m/s Peak Wind Speed (Within 1 minute) m/s ± 1 m/s Wind Direction Degrees ± 5⁰ Meteorological Data Requirements Wind Speed Standard Deviation -- -- Meteorological Data Requirements Wind Direction Standard Deviation -- -- Barometric Pressure Hecto Pascals (HPa) ± 60 Pa Ambient Temperature ˚C ± 1⁰ *** End of Appendix F *** PRODUCTION DAMAGES

Additional Data Requirements. Seller shall comply with the telemetry parameters set forth in the Meteorological Data Requirements table below and meet the meteorological data requirements pursuant to the CAISO’s Business Practice Manual for Direct Telemetry. Prior to Commercial Operation Date, if the Facility uses a technology type identified in the table below, Seller shall demonstrate to Buyer’s reasonable satisfaction that Seller has installed equipment capable of complying with the requirements of this Section 2. Meteorological Data Requirements Technology Type Telemetry Parameters Units Accuracy Solar Photovoltaic Back Panel Temperature ˚C ± 1⁰ Global Horizontal Irradiance W/m2 ± 25 W/m² Plane of Array Irradiance (If PV is fixed) Direct Normal Irradiance (If PV is Tracking) W/m2 ± 25 W/m² Wind Speed m/s ± 1 m/s Peak Wind Speed (Within 1 minute) m/s ± 1 m/s Wind Direction Degrees ± 5⁰ Ambient Air Temperature ˚C ± 1⁰ Dewpoint Air Temperature ˚C ± 1⁰ Horizontal Visibility m -- Precipitation (Rain Rate) mm/hr -- Precipitation (Running 30 day total) mm -- Barometric Pressure Hecto Pascals (HPa) ± 60 Pa Solar Thermal or Solar Trough Global Horizontal Irradiance W/m2 ± 25 W/m² Plane of Array Irradiance (If PV is fixed) Direct Normal Irradiance (If PV is Tracking) W/m2 ± 25 W/m2 Wind Speed m/s ± 1 m/s Peak Wind Speed (Within 1 minute) m/s ± 1 m/s Wind Direction Degrees ± 5⁰ Ambient Air Temperature ˚C ± 1⁰ Dewpoint Air Temperature ˚C ± 1⁰ Horizontal Visibility m -- Precipitation (Rain Rate) mm/hr -- Precipitation (Running 30 day total) mm -- Barometric Pressure Hecto Pascals (HPa) ± 60 Pa Wind Wind Speed m/s ± 1 m/s Peak Wind Speed (Within 1 minute) m/s ± 1 m/s Wind Direction Degrees ± 5⁰ Wind Speed Standard Deviation -- -- Meteorological Data Requirements Wind Direction Standard Deviation -- -- Barometric Pressure Hecto Pascals (HPa) ± 60 Pa Ambient Temperature ˚C ± 1⁰ *** End of Appendix F *** PRODUCTION DAMAGESAppendix G – Guaranteed Energy Production Damanges In accordance with the provisions in Section 12.2, GEP Damages means the liquidated damages payment due by Seller to Buyer, calculated as follows: [(A-B) X (C-D)] Where: A = the Guaranteed Energy Production for the Performance Measurement Period, in MWh B = Sum of Delivered Energy over the Performance Measurement Period, in MWh C = Replacement price for the Performance Measurement Period, in $/MWh, reflecting the sum of (a) the simple average of the simple average of the Day Ahead Integrated Forward Market hourly price, as published by the CAISO, for the Existing Zone Generation Trading Hub, in which the Project resides, plus (b) $50/MWh D = the unweighted Contract Price for the Performance Measurement Period, in $/MWh The Parties agree that in the above calculation of GEP Damages, the result of “(C-D)” shall not be less than $20/MWh and shall be no greater than seventy five percent (75%) of the Contract Price (in $/MWh). *** End of Appendix G *** Appendix H – Form of Letter of Credit Issuing Bank Letterhead and Address STANDBY LETTER OF CREDIT NO. ______________ Date: [insert issue date] Beneficiary: Pacific Gas and Electric Company Applicant: [Insert name and address of Applicant] 00 Xxxxx Xxxxxx, Mail Code B28L Xxx Xxxxxxxxx, XX 00000 Attention: Credit Risk Management Letter of Credit Amount: [insert amount] Expiry Date: [insert expiry date] Ladies and Gentlemen: By order of __________________________________ [insert name of Applicant] (“Applicant”), we hereby issue in favor of Pacific Gas and Electric Company (the “Beneficiary”) our irrevocable standby letter of credit No. _____________ ____ [insert number of letter of credit] (“Letter of Credit”), for the account of Applicant, for drawings up to but not to exceed the aggregate sum of U.S. $ __________________________ _____________________________________________ _[insert amount in figures followed by (amount in words)] (“Letter of Credit Amount”). This Letter of Credit is available with _________________________________________________________ ____________________________________________________________________ [insert name of issuing bank, and the city and state in which it is located] by sight payment, at our offices located at the address stated below, effective immediately, and it will expire at our close of business on _______________________________ [insert expiry date] (the “Expiry Date”). Funds under this Letter of Credit are available to the Beneficiary against presentation of the following documents: