Additional Purchases; Increase in Authorized Workstations Sample Clauses

Additional Purchases; Increase in Authorized Workstations. In the event --------------------------------------------------------- that Licensee wishes to increase the number of Authorized Workstations, Licensee shall submit a purchase order to Distributor for the quantity of additional Authorized Workstations desired at the rates and in the minimum blocks for increasing licensed usage specified in Exhibit A. If no rate or minimum is specified, Distributor and Licensee shall work together to determine a mutually satisfactory rate and minimum purchase amount (if any), and shall execute an additional Exhibit to this Agreement reflecting such terms. Upon Distributor's notification of acceptance of Licensee's purchase order, Licensee may install the Client Software on such additional Authorized Workstations.
AutoNDA by SimpleDocs

Related to Additional Purchases; Increase in Authorized Workstations

  • Modifications and Updates to the Wire Center List and Subsequent Transition Periods 5.4.6.1 In the event AT&T identifies additional wire centers that meet the criteria set forth in Sections 5.4.2.1 or 5.4.2.2 above, but that were not included in the Master List of Unimpaired Wire Centers or AT&T’s List of Unimpaired Wire Centers, AT&T shall include such additional wire centers in a CNL. Each such list of additional wire centers shall be considered a Subsequent Wire Center List. AT&T will follow any limitations on the frequency with which it may issue such lists and notification procedures set forth in applicable Commission orders. 5.4.6.2 TWTC shall have thirty (30) business days to dispute the additional wire centers listed on AT&T’s CNL. Absent such dispute, effective thirty (30) business days after the date of a AT&T CNL providing a Subsequent Wire Center List, AT&T shall not be required to provide DS1 and DS3 Dedicated Transport, as applicable, in such additional wire center(s), except pursuant to the self-certification process as set forth in Section 1.9.1 of this Attachment. 5.4.6.3 For purposes of Section 5.4.6.1 above, AT&T shall make available DS1 and DS3 Dedicated Transport that were in service for TWTC in a wire center on the Subsequent Wire Center List as of the thirtieth (30th) business day after the date of AT&T’s CNL identifying the Subsequent Wire Center List (Subsequent Embedded Base) until one hundred eighty (180) days after the thirtieth (30th) business day Version: 4Q06 Standard ICA 11/30/06 from the date of AT&T’s CNL identifying the Subsequent Wire Center List (Subsequent Transition Period). 5.4.6.4 The rates set forth in Exhibit B shall apply to the Subsequent Embedded Base during the Subsequent Transition Period. 5.4.6.5 No later than one hundred eighty (180) days from AT&T’s CNL identifying the Subsequent Wire Center List, TWTC shall submit an LSR(s) or spreadsheet(s) as applicable, identifying the Subsequent Embedded Base of circuits to be disconnected or converted to other AT&T services. 5.4.6.5.1 In the case of disconnection, the applicable disconnect charges set forth in this Agreement shall apply. 5.4.6.5.2 If TWTC chooses to convert DS1 and/or DS3 Dedicated Transport to special access circuits in existence as of the Effective Date of this Agreement, AT&T will include such DS1 and/or DS3 Dedicated Transport within TWTC’s total special access circuits, and apply any discounts to which TWTC is entitled from the transition period of 3/11/2006 to the conversion date. Conversions will be subject to the switch-as-is charge set forth in Exhibit A to this Attachment 2. 5.4.6.5.3 AT&T shall not impose disconnect or nonrecurring installation charges when transitioning the Subsequent Embedded Base of DS1 and DS3 Dedicated Transport in existence as of the Effective Date of this Agreement. 5.4.6.6 If TWTC fails to submit the LSR(s) or spreadsheet(s) for all of its Subsequent Embedded Base by one hundred eighty (180) days after the date of AT&T’s CNL identifying the Subsequent Wire Center List, AT&T will identify TWTC’s remaining Subsequent Embedded Base, if any, and will transition such circuits to the equivalent tariffed AT&T service(s), or in the case of Georgia, to the equivalent 271 service(s) set forth in Exhibit 1. In the states of Florida, Kentucky, Mississippi and South Carolina, those circuits identified and transitioned by AT&T shall be subject to the applicable disconnect charges as set forth in this Agreement and the full nonrecurring charges for installation of the equivalent tariffed AT&T service as set forth in AT&T’s tariffs. In the states of Alabama, Georgia, North Carolina and Tennessee, those circuits identified and transitioned by AT&T shall be subject to the applicable switch-as-is rates set forth in Exhibit A of Attachment

  • Unbundled Loop Modifications (Line Conditioning 2.5.1 Line Conditioning is defined as routine network modification that BellSouth regularly undertakes to provide xDSL services to its own customers. This may include the removal of any device, from a copper Loop or copper Subloop that may diminish the capability of the Loop or Subloop to deliver high-speed switched wireline telecommunications capability, including xDSL service. Such devices include, load coils, excessive bridged taps, low pass filters, and range extenders. Excessive bridged taps are bridged taps that serves no network design purpose and that are beyond the limits set according to industry standards and/or the BellSouth’s TR 73600 Unbundled Local Loop Technical Specification. 2.5.2 BellSouth will remove load coils only on copper Loops and Subloops that are less than eighteen thousand (18,000) feet in length. 2.5.3 For any copper loop being ordered by NewPhone which has over six thousand (6,000) feet of combined bridged tap will be modified, upon request from NewPhone, so that the loop will have a maximum of six thousand (6,000) feet of bridged tap. This modification will be performed at no additional charge to NewPhone. Loop conditioning orders that require the removal of bridged tap that serves no network design purpose on a copper Loop that will result in a combined total of bridged tap between two thousand five hundred (2,500) and six thousand (6,000) feet will be performed at the rates set forth in Exhibit A. 2.5.4 NewPhone may request removal of any unnecessary and non-excessive bridged tap (bridged tap between zero (0) and two thousand five hundred (2,500) feet which serves no network design purpose), at rates pursuant to BellSouth’s SC Process as mutually agreed to by the Parties. 2.5.5 Rates for ULM are as set forth in Exhibit A. 2.5.6 BellSouth will not modify a Loop in such a way that it no longer meets the technical parameters of the original Loop type (e.g., voice grade, ADSL, etc.) being ordered. 2.5.7 If NewPhone requests ULM on a reserved facility for a new Loop order, BellSouth may perform a pair change and provision a different Loop facility in lieu of the reserved facility with ULM if feasible. The Loop provisioned will meet or exceed specifications of the requested Loop facility as modified. NewPhone will not be charged for ULM if a different Loop is provisioned. For Loops that require a DLR or its equivalent, BellSouth will provide LMU detail of the Loop provisioned. 2.5.8 NewPhone shall request Loop make up information pursuant to this Attachment prior to submitting a service inquiry and/or a LSR for the Loop type that NewPhone desires BellSouth to condition. 2.5.9 When requesting ULM for a Loop that BellSouth has previously provisioned for NewPhone, NewPhone will submit a SI to BellSouth. If a spare Loop facility that meets the Loop modification specifications requested by NewPhone is available at the location for which the ULM was requested, NewPhone will have the option to change the Loop facility to the qualifying spare facility rather than to provide ULM. In the event that BellSouth changes the Loop facility in lieu of providing ULM, NewPhone will not be charged for ULM but will only be charged the service order charges for submitting an order.

  • Alternative Work Schedule An alternate forty (40) hour work schedule (other than five (5) uniform and consecutive eight (8) hour days in a seven (7) day period), or for hospital personnel an eighty (80) hour workweek in a fourteen (14) day period and other mutually agreed upon schedules that comply with applicable federal and state law. Employee work schedules normally include two (2) consecutive days off.

  • Books and Records; Certain Funds Received After the Cut-Off Date From and after the sale of the Mortgage Loans to the Purchaser, record title to each Mortgage (other than with respect to any Outside Serviced Mortgage Loan) and each Note shall be transferred to the Trustee subject to and in accordance with this Agreement. Any funds due after the Cut-Off Date in connection with a Mortgage Loan received by the Seller shall be held in trust on behalf of the Trustee (for the benefit of the Certificateholders) as the owner of such Mortgage Loan and shall be transferred promptly to the Certificate Administrator. All scheduled payments of principal and interest due on or before the Cut-Off Date but collected after the Cut-Off Date, and all recoveries and payments of principal and interest collected on or before the Cut-Off Date (only in respect of principal and interest on the Mortgage Loans due on or before the Cut-Off Date and principal prepayments thereon), shall belong to, and shall be promptly remitted to, the Seller. The transfer of each Mortgage Loan shall be reflected on the Seller’s balance sheets and other financial statements as the sale of such Mortgage Loan by the Seller to the Purchaser. The Seller intends to treat the transfer of each Mortgage Loan to the Purchaser as a sale for tax purposes. Following the transfer of the Mortgage Loans by the Seller to the Purchaser, the Seller shall not take any actions inconsistent with the ownership of the Mortgage Loans by the Purchaser and its assignees. The transfer of each Mortgage Loan shall be reflected on the Purchaser’s balance sheets and other financial statements as the purchase of such Mortgage Loan by the Purchaser from the Seller. The Purchaser intends to treat the transfer of each Mortgage Loan from the Seller as a purchase for tax purposes. The Purchaser shall be responsible for maintaining, and shall maintain, a set of records for each Mortgage Loan which shall be clearly marked to reflect the transfer of ownership of each Mortgage Loan by the Seller to the Purchaser pursuant to this Agreement. It is expressly agreed and understood that, notwithstanding the assignment of the Loan Documents, it is expressly intended that the Seller will receive the benefit of any securitization indemnification provisions in the Loan Documents.

  • Effective Date Deliveries On the Effective Date, the Company shall have delivered to the Representative executed copies of the Trust Agreement, the Warrant Agreement, the Registration Rights Agreement, all of the Insider Letters and the Subscription Agreement.

  • Additional Software Should any additional Software licenses be purchased during the Term: (a) In the case of Permanent Licenses, the maintenance Fees will be pro-rated till the Expiry Date and these licenses will be added to the Supported Software. (b) In the case of Subscription Licenses, the license Fees will be pro-rated till the Expiry Date and these licenses will be added to the Supported Software. (c) In the case of Monthly Licenses, the licenses will be subject to their own support and maintenance agreement. (d) The Customer may request that support of certain bundles of licenses be subject to their separate support and maintenance agreements, in which case the expiry dates of these agreements may not coincide.

  • Execution of Change Orders Change Orders shall be signed by the Contractor, ordinarily certified by the Design Professional, and approved by the Owner in accordance with the form of Change Order prescribed by the Owner. No request for payment by the Contractor for a Change Order shall be due, nor shall any such request appear on an Application for Payment, until the Change Order is executed by the Owner. In the event of emergency (see Article

  • Alternative Work Schedules Employees may request alternative work schedules such as a nine (9) day - 80 hour two week schedule or a four (4) day - 40 hour week schedule. Management will respond to an employee's request within 15 calendar days. Any changes from existing work schedules will be based on the needs of the service as determined by Management. Employees covered by the Fair Labor Standards Act will not be placed on alternate work schedules that mandate the payment of overtime under the Act.

  • Term SOFR Conforming Changes In connection with the use or administration of Term SOFR, the Administrative Agent will have the right to make Conforming Changes from time to time and, notwithstanding anything to the contrary herein or in any other Loan Document, any amendments implementing such Conforming Changes will become effective without any further action or consent of any other party to this Agreement or any other Loan Document. The Administrative Agent will promptly notify the Borrower and the Lenders of the effectiveness of any Conforming Changes in connection with the use or administration of Term SOFR.

  • Price Increase For purposes of this paragraph, “Contract Year” means a twelve

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!