Provisioning of High Frequency Spectrum and Splitter Space 3.2.1 BellSouth will provide <<customer_name>> with access to the High Frequency Spectrum as follows:
CAISO Monthly Billed Fuel Cost [for Geysers Main only] The CAISO Monthly Billed Fuel Cost is given by Equation C2-1. CAISO Monthly Billed Fuel Cost Equation C2-1 = Billable MWh ◆ Steam Price ($/MWh) Where: • Steam Price is $16.34/MWh. • For purposes of Equation C2-1, Billable MWh is all Billable MWh Delivered after cumulative Hourly Metered Total Net Generation during the Contract Year from all Units exceeds the Minimum Annual Generation given by Equation C2-2. Equation C2-2 Minimum Annual Generation = (Annual Average Field Capacity ◆ 8760 hours ◆ 0.4) - (A+B+C) Where: • Annual Average Field Capacity is the arithmetic average of the two Field Capacities in MW for each Contract Year, determined as described below. Field Capacity shall be determined for each six-month period from July 1 through December 31 of the preceding calendar year and January 1 through June 30 of the Contract Year. Field Capacity shall be the average of the five highest amounts of net generation (in MWh) simultaneously achieved by all Units during eight-hour periods within the six-month period. The capacity simultaneously achieved by all Units during each eight-hour period shall be the sum of Hourly Metered Total Net Generation for all Units during such eight-hour period, divided by eight hours. Such eight-hour periods shall not overlap or be counted more than once but may be consecutive. Within 30 days after the end of each six-month period, Owner shall provide CAISO and the Responsible Utility with its determination of Field Capacity, including all information necessary to validate that determination. • A is the amount of Energy that cannot be produced (as defined below) due to the curtailment of a Unit during a test of the Facility, a Unit or the steam field agreed to by CAISO and Owner. • B is the amount of Energy that cannot be produced (as defined below) due to the retirement of a Unit or due to a Unit’s Availability remaining at zero after a period of ten Months during which the Unit’s Availability has been zero. • C is the amount of Energy that cannot be produced (as defined below) because a Force Majeure Event reduces a Unit’s Availability to zero for at least thirty (30) days or because a Force Majeure Event reduces a Unit’s Availability for at least one hundred eighty (180) days to a level below the Unit Availability Limit immediately prior to the Force Majeure Event. • The amount of Energy that cannot be produced is the sum, for each Settlement Period during which the condition applicable to A, B or C above exists, of the difference between the Unit Availability Limit immediately prior to the condition and the Unit Availability Limit during the condition.
Television Equipment Recycling Program If this Contract is for the purchase or lease of covered television equipment, then Contractor certifies that it is compliance with Subchapter Z, Chapter 361 of the Texas Health and Safety Code related to the Television Equipment Recycling Program.
Loss Leader; Recycled Products Contractor shall not sell or use any article or product as a “loss leader” as defined in Section 17030 of the Business and Professions Code. If Contractor will sell to the Judicial Council, or use in the performance of this Agreement, goods specified in PCC 12207 (for example, certain paper products, office supplies, mulch, glass products, lubricating oils, plastic products, paint, antifreeze, tires and tire-derived products, and metal products), then with respect to those goods: (i) Contractor shall use recycled products in the performance of this Agreement to the maximum extent doing so is economically feasible, and (ii) upon request, Contractor shall certify in writing under penalty of perjury, the minimum, if not exact, percentage of post consumer material as defined in the PCC 12200, in such goods regardless of whether the goods meet the requirements of PCC 12209.
CONSTRUCTION INDUSTRY DEVELOPMENT & PROMOTION FUND 19.01 The Employer shall contribute to the Union’s Construction Industry Development and Promotion Fund (the “Industry Fund”) the amount identified at Schedule “A” for each hour worked by each employee covered by this Agreement, and it shall remit such contributions to the Union together with union dues, and in the manner described in the Remittances to the Union article and in the Union’s remittance directives.
Unbundled Subloop Distribution (USLD) 2.8.2.1 The USLD facility is a dedicated transmission facility that BellSouth provides from an End User’s point of demarcation to a BellSouth cross-connect device. The BellSouth cross-connect device may be located within a remote terminal (RT) or a stand-alone cross-box in the field or in the equipment room of a building. The USLD media is a copper twisted pair that can be provisioned as a 2-wire or 4-wire facility. BellSouth will make available the following subloop distribution offerings where facilities exist: USLD – Voice Grade (USLD-VG) Unbundled Copper Subloop (UCSL) USLD – Intrabuilding Network Cable (USLD-INC (aka riser cable))
NASPO ValuePoint eMarket Center a. In July 2011, NASPO ValuePoint entered into a multi-year agreement with SciQuest, Inc. whereby SciQuest will provide certain electronic catalog hosting and management services to enable eligible NASPO ValuePoint’s customers to access a central online website to view and/or shop the goods and services available from existing NASPO ValuePoint Cooperative Contracts. The central online website is referred to as the NASPO ValuePoint eMarket Center.
Under-Frequency and Over Frequency Conditions The New York State Transmission System is designed to automatically activate a load- shed program as required by the NPCC in the event of an under-frequency system disturbance. Developer shall implement under-frequency and over-frequency relay set points for the Large Generating Facility as required by the NPCC to ensure “ride through” capability of the New York State Transmission System. Large Generating Facility response to frequency deviations of predetermined magnitudes, both under-frequency and over-frequency deviations, shall be studied and coordinated with the NYISO and Connecting Transmission Owner in accordance with Good Utility Practice. The term “ride through” as used herein shall mean the ability of a Generating Facility to stay connected to and synchronized with the New York State Transmission System during system disturbances within a range of under-frequency and over-frequency conditions, in accordance with Good Utility Practice and with NPCC Regional Reliability Reference Directory # 12, or its successor.
Replacement Basic Cardmember About using your card You must tell us if the Basic Cardmember is no longer an employee or officer of the Company or does not want to be the Basic Cardmember. In that case, you must either close the Account, or propose another person to replace the Basic Cardmember. If you propose another person to replace the Basic Cardmember, that person must agree to assume the obligations and liabilities of the Basic Cardmember under this Agreement, as of the date that such person replaces the Basic Cardmember. That person is subject to our approval. You agree that the Basic Cardmember remains the Basic Cardmember until we approve a replacement or the Account is closed. Using the card Cards may be used for purchases. At our discretion, we may permit you to make cash advances, balance transfers or person-to-person transactions subject to Limits on person-to-person transactions. You cannot transfer balances from any other account issued by us and/or our affiliates. Each Cardmember acknowledges and agrees that cards are intended to be used for the Company's commercial or business purposes. You may arrange for certain merchants and third parties to store your card number and expiration date, so that, for example: ● the merchant may charge your account at regular intervals; or ● you may make charges using that stored card information. We may (but are not required to) tell these merchants and third parties if your expiration date or card number changes or if your account status is updated, including if your account is cancelled. If you do not want us to share your updated account information, please contact us using the number on the back of your card. Keep the cards safe. Do not let anyone use them. If a card is lost or stolen or the Account is being used without permission, contact us right away. The Account may not be used for illegal activities. Limits on person-to-person transactions Your person-to-person transactions may not exceed the $2,000 person-to-person transaction limit within any 30-day period. You agree to manage your Account so that the total of your person-to-person transactions in any 30-day period do not exceed the limit on person-to-person transactions. We may not approve a person-to-person transaction if it would cause your Account to exceed the person-to- person transaction limit or your Credit Limit. Promise to pay You promise to pay all charges, including: ● charges you make, even if you do not present your card or sign for the transaction, ● charges that other people make, whether or not you or an Additional Cardmember intend to let them use the Account, subject to applicable law, and if you let them use your Account, and ● charges that Additional Cardmembers make or permit others to make. Credit limit and cash advance limit We assign a Credit Limit to the Account. We may make part of the Credit Limit available for cash advances (Cash Advance Limit). There may also be a limit on the amount you can withdraw from ATMs in a given period. The Credit Limit and Cash Advance Limit are shown on page 1 of Part 1 and on each billing statement. We may increase or reduce the Credit Limit and Cash Advance Limit. We may do so even if you pay on time and the Account is not in default. You agree to manage the Account so that: ● the Account balance (including fees and interest) is not more than the Credit Limit, and ● the cash advance balance (including fees and interest) is not more than the Cash Advance Limit. We may approve charges that cause the Account balance to go over the Credit Limit. If we do this, we will not charge an overlimit fee. If we ask you to promptly pay the amount of the Account balance above the Credit Limit, you agree to do so. Declined transactions We may decline to authorize a charge. Reasons we may do this include suspected fraud and our assessment of your creditworthiness. This may occur even if the charge would not cause you to go over your Credit Limit and your Account is not in default. We are not responsible for any losses you or any Additional Cardmembers incur if we do not authorize a charge. And we are not responsible if any merchant refuses to accept the card. About your payments When you must pay You must pay at least the Minimum Payment Due by the Payment Due Date. The Minimum Payment Due and Payment Due Date are shown on each billing statement. Each statement also states the time and manner by which you must make your payment for it to be credited as of the same day it is received. For your payment to be considered on time, we must receive at least the Minimum Payment Due in such time and How to make payments Make payments to us in U.S. dollars with: ● a single check drawn on a U.S. bank, or ● a single negotiable instrument clearable through the U.S. banking system, for example a money order, or ● an electronic payment that can be cleared through the U.S. banking system. When making a payment by mail: ● make a separate payment for each Account, ● mail your payment to the address shown on the payment coupon on the billing statement, and ● write the Account number on your check or negotiable instrument and include the payment coupon. If your payment meets the above requirements, we will credit it to the Account as of the day we receive it, as long as we receive it by the time disclosed in the manner by the Payment Due Date shown on your billing statement. Each statement also shows a Closing Date. The Closing Date is the last day of the billing period covered by the statement. Each Closing Date is about 30 days after the previous statement's Closing Date. billing statement. If we receive it after that time, we will credit the payment on the day after we receive it. If your payment does not meet the above requirements, there may be a delay in crediting the Account. This may result in late fees and additional interest charges (see How Rates and Fees Work on page 2 of Part 1). We will not accept a payment made in a foreign currency or a payment drawn on an account at a bank located outside of the U.S. If we process a late payment, a partial payment, or a payment marked with any restrictive language, that will have no effect on our rights and will not change this Agreement. How we apply payments and credits Your Account may have balances with different interest rates. For example, purchases may have a lower interest rate than cash advances. If your Account has balances with different interest rates, here is how we generally apply payments in a billing period: ● We apply your payments, up to the Minimum Payment Due, first to the balance with the lowest interest rate, and then to balances with higher interest rates. ● After the Minimum Payment Due has been paid, we apply your payments to the balance with the highest interest rate, and then to balances with lower interest rates. In most cases, we apply a credit to the same balance as the related charge. For example, we apply a credit for a purchase to the purchase balance. We may apply payments and credits within balances, and among balances with the same interest rate, in any order we choose. About your Minimum Payment Due
Technical Standards Applicable to a Wind Generating Plant i. Low Voltage Ride-Through (LVRT) Capability A wind generating plant shall be able to remain online during voltage disturbances up to the time periods and associated voltage levels set forth in the standard below. The LVRT standard provides for a transition period standard and a post-transition period standard.
