Product Development (a) Supplier may develop enhancements it intends to incorporate into the BioGlue Surgical Adhesive during the term of this Agreement that have potential application to the Company Product (“Enhancements”). Unless otherwise agreed by the parties, at least once every six months during the Term, representatives of each of BioForm and Supplier shall hold a meeting in accordance with Sections 4.4 and 8.4 (the “Product Development Meeting”) at which Supplier will present Enhancements for BioForm to consider for application to the Company Product. At such Product Development Meeting, BioForm will also present its marketing plans (pursuant to Section 4.4) for the period and any information or feedback that BioForm reasonably believes may lead to Improvements. Within 30 calendar days following each Product Development Meeting, Supplier shall deliver a notice to BioForm (the “Enhancements Notice”) that shall describe the Enhancements that were presented by Supplier at such Product Development Meeting. Within 30 calendar days following receipt of the Enhancements Notice, BioForm may notify Supplier in writing if BioForm elects that any Enhancement described in the Enhancements Notice shall become an Improvement. If BioForm does provide such notice to Supplier during such 30-calendar day period, then BioForm and Supplier shall agree on a timeline for implementation of the Improvement in new Product Specifications for Company Product. If BioForm does not provide such a notice, said Enhancement shall not be implemented into the Company Product. The Enhancements Notice may also describe any potential Enhancements presented by Supplier at the Product Development Meeting, but BioForm shall not be required to take any action under this Section 8.4 with respect to such potential Enhancements until such time as they are presented by Supplier as Enhancements at a future Product Development Meeting. All Enhancements and potential Enhancement information provided by Supplier shall be considered Supplier Confidential Information.
(b) From time to time, each party may request the other party to participate in joint projects to develop Improvements. Neither party is obligated to participate in such projects, and in each **** Certain information on this page has been omitted and filed separately with the Securities and Exchange Commission. Confidential treatment has been requested with respect to the omitted portions. instance, each party’s decision whether to participate will be made in such party’s sole discretion. If both parties mutually agree to participate in such a project (a “Program”), the parties will promptly prepare a mutually agreeable written development agreement specifying the development activities to be performed by and the research and development tasks assigned to each party (the “Development Agreement”). All allocation of Intellectual Property rights with respect to any Program will be set forth in writing in the Development Agreement.
(c) In the absence of a Development Agreement, (i) BioForm and Supplier shall retain joint ownership of Intellectual Property rights in which there is joint inventorship by BioForm (or its Affiliates) and Supplier, as determined in accordance with United States patent law, with Supplier’s rights in such joint ownership being subject to the license rights of BioForm under this Agreement, (ii) any Intellectual Property rights related to the Company Products, Enhancements, and Improvements that are created solely by employees or consultants of Supplier during the Term shall be considered to be Intellectual Property rights of Supplier, subject to the license rights of BioForm under this Agreement, and (iii) any Intellectual Property rights related to the Company Products and Improvements that are created solely by employees or consultants of BioForm or any of its Affiliates during the Term shall be considered to be Intellectual Property rights of BioForm. BioForm hereby grants to Supplier a perpetual, royalty free, world-wide, nonexclusive license to Supplier under such Blocking Intellectual Property to make, use, and sell such Intellectual Property outside the Field. “Blocking Intellectual Property” for the purposes of Section 8.4(c)(iii) shall mean Intellectual Property necessary for Supplier to make, use, or sell SA Product.
Product ACCEPTANCE Unless otherwise provided by mutual agreement of the Authorized User and the Contractor, Authorized User(s) shall have thirty (30) days from the date of delivery to accept hardware products and sixty (60) days from the date of delivery to accept all other Product. Where the Contractor is responsible for installation, acceptance shall be from completion of installation. Failure to provide notice of acceptance or rejection or a deficiency statement to the Contractor by the end of the period provided for under this clause constitutes acceptance by the Authorized User(s) as of the expiration of that period. The License Term shall be extended by the time periods allowed for trial use, testing and acceptance unless the Commissioner or Authorized User agrees to accept the Product at completion of trial use. Unless otherwise provided by mutual agreement of the Authorized User and the Contractor, Authorized User shall have the option to run testing on the Product prior to acceptance, such tests and data sets to be specified by User. Where using its own data or tests, Authorized User must have the tests or representative set of data available upon delivery. This demonstration will take the form of a documented installation test, capable of observation by the Authorized User, and shall be made part of the Contractor’s standard documentation. The test data shall remain accessible to the Authorized User after completion of the test. In the event that the documented installation test cannot be completed successfully within the specified acceptance period, and the Contractor or Product is responsible for the delay, Authorized User shall have the option to cancel the order in whole or in part, or to extend the testing period for an additional thirty (30) day increment. Authorized User shall notify Contractor of acceptance upon successful completion of the documented installation test. Such cancellation shall not give rise to any cause of action against the Authorized User for damages, loss of profits, expenses, or other remuneration of any kind. If the Authorized User elects to provide a deficiency statement specifying how the Product fails to meet the specifications within the testing period, Contractor shall have thirty (30) days to correct the deficiency, and the Authorized User shall have an additional sixty (60) days to evaluate the Product as provided herein. If the Product does not meet the specifications at the end of the extended testing period, Authorized User, upon prior written notice to Contractor, may then reject the Product and return all defective Product to Contractor, and Contractor shall refund any monies paid by the Authorized User to Contractor therefor. Costs and liabilities associated with a failure of the Product to perform in accordance with the functionality tests or product specifications during the acceptance period shall be borne fully by Contractor to the extent that said costs or liabilities shall not have been caused by negligent or willful acts or omissions of the Authorized User’s agents or employees. Said costs shall be limited to the amounts set forth in the Limitation of Liability Clause for any liability for costs incurred at the direction or recommendation of Contractor.
Commercialization Intrexon shall have the right to develop and Commercialize the Reverted Products itself or with one or more Third Parties, and shall have the right, without obligation to Fibrocell, to take any such actions in connection with such activities as Intrexon (or its designee), at its discretion, deems appropriate.
New Products You agree to comply with NASD Notice to Members 5-26 recommending best practices for reviewing new products.
Manufacturing (a) The Supplier shall without limitation be responsible, at no additional cost to the Purchaser, for: sourcing and procuring all raw materials for the Products; obtaining all necessary approvals, permits and licenses for the manufacturing of the Products; providing sufficient qualified staff and workers to perform the obligations under this Purchase Agreement; implementing and maintaining effective inventory and production control procedures with respect to the Products; and handling other matters as reasonably requested by the Purchaser from time to time.
(b) The Supplier shall not change any process, material, component, packaging or manufacturing location without the Purchaser’s express prior written approval.
Licensed Products Lessee will obtain no title to Licensed Products which will at all times remain the property of the owner of the Licensed Products. A license from the owner may be required and it is Lessee's responsibility to obtain any required license before the use of the Licensed Products. Lessee agrees to treat the Licensed Products as confidential information of the owner, to observe all copyright restrictions, and not to reproduce or sell the Licensed Products.
Product Data Illustrations, standard schedules, performance charts, instructions, brochures, diagrams, and other information furnished by Developer to illustrate a material, product, or system for some portion of the Work.
Research Primary Investigator as part of a multi-site study (25 points) • Co-Investigator as part of a multi-site study (20 points) • Primary Investigator of a facility/unit based research study (15 points) • Co-Investigator of a facility/unit based research study (10 points) • Develops a unit specific research proposal (5 points) • Conducts a literature review as part of a research study (5 points)
SHOP DRAWINGS, PRODUCT DATA AND SAMPLES 4.12.1 Shop Drawings are drawings, diagrams, schedules and other, data specially prepared for the Work by the Contractor or any Subcontractor, manufacturer, supplier or distributor to illustrate some portion of the Work.
4.12.2 Product Data are illustrations, standard schedules, performance charts, instructions, brochures, diagrams and other information furnished by the Contractor to illustrate a material, product or system for some portion of the Work.
4.12.3 Samples are physical examples which illustrate materials, equipment or workmanship and establish standards by which the Work will be judged.
4.12.4 The Contractor shall review, approve and submit, with reasonable promptness and in such sequence as to cause no delay in the Work or in the work of the State or any separate contractor, all Shop Drawings, Product Data and Samples required by the Contract Documents.
4.12.5 By approving and submitting Shop Drawings, Product Data and Samples, the Contractor represents that he / she has determined and verified all materials, field measurements, and field construction criteria related thereto, or will do so, and that he / she has checked and coordinated the information contained within such submittals with the requirements of the Work and of the Contract Documents.
4.12.6 The Contractor shall not be relieved of responsibility for any deviation from the requirements of the Contract Documents by the Architect's approval of Shop Drawings, Product Data or Samples under Subparagraph 2.2.7 of these General Conditions unless the Contractor has specifically informed the Architect and the State in writing of such deviation at the time of sub- mission and the Architect and the State has given written approval to the specific deviation. The Contractor shall not be relieved from responsibility for errors or omissions in the Shop Drawings, Product Data or Samples by the Architect's approval thereof.
4.12.7 The Contractor shall direct specific attention, in writing or on resubmitted Shop Drawings, Product Data or Samples, to revisions other than those requested by the Architect on previous submittals.
4.12.8 No portion of the Work requiring submission of a Shop Drawing, Product Data or Sample shall be commenced until the submittal has been approved by the Architect as provided in Subparagraph 2.2.7 of these General Conditions. All such portions of the Work shall be in accordance with approved submittals.
Clinical 1.1 Provides comprehensive evidence based nursing care and individual case management to a specific group of patients/clients including assessment, intervention and evaluation.
1.2 Undertakes clinical shifts at the direction of senior staff and the Nursing Director including participation on the on-call/after-hours/weekend roster if required.
1.3 Responsible and accountable for patient safety and quality of care through planning, coordinating, performing, facilitating, and evaluating the delivery of patient care relating to a particular group of patients, clients or staff in the practice setting.
1.4 Monitors, reviews and reports upon the standard of nursing practice to ensure that colleagues are working within the scope of nursing practice, following appropriate clinical pathways, policies, procedures and adopting a risk management approach in patient care delivery.
1.5 Participates in xxxx rounds/case conferences as appropriate.
1.6 Educates patients/carers in post discharge management and organises discharge summaries/referrals to other services, as appropriate.
1.7 Supports and liaises with patients, carers, colleagues, medical, nursing, allied health, support staff, external agencies and the private sector to provide coordinated multidisciplinary care.
1.8 Completes clinical documentation and undertakes other administrative/management tasks as required.
1.9 Participates in departmental and other meetings as required to meet organisational and service objectives.
1.10 Develops and seeks to implement change utilising expert clinical knowledge through research and evidence based best practice.
1.11 Monitors and maintains availability of consumable stock.
1.12 Complies with and demonstrates a positive commitment to Regulations, Acts and Policies relevant to nursing including the Code of Ethics for Nurses in Australia, the Code of Conduct for Nurses in Australia, the National Competency Standards for the Registered Nurse and the Poisons Act 2014 and Medicines and Poisons Regulations 2016.
1.13 Promotes and participates in team building and decision making.
1.14 Responsible for the clinical supervision of nurses at Level 1 and/or Enrolled Nurses/ Assistants in Nursing under their supervision.
