Arctic MFC (ARC MFC Sample Clauses

Arctic MFC (ARC MFC. In situ observations are needed in ARC MFC for calibrating the models, validating model products and reducing errors in the model fields via data assimilation. A description of general requirements on in situ observations for Arctic forecast and reanalysis is given in Table 2.3. 1. There are in total 10 different applications, ranging from offline Calibration/Validation (Cal/Val) of physical ocean products to offline data assimilation in biogeochemical reanalysis. All activities need in situ data with Arctic coverage. For Cal/Val purpose, a limited number of stations with high frequency sampling is an ideal solution. For generating Quality Identification Document (QUID) report and historic reanalysis, only offline observations are needed. For Near Real Time (NRT) analysis and forecast product validation, NRT data are needed. Applications in interim scales, i.e., 1-12 months before present, observations have to be available in corresponding time. Considering scientific and service purposes, priority areas of observations are given to Nordic Seas, Straits and important shipping areas e.g. Cape Farewell, Kara Sea and Northern Sea routes. For biogeochemical product validation, coastal shelf seas are important monitoring areas. Freshwater inputs are also important for models. Table 2.3.1 General requirements on in situ data for Arctic forecast and reanalysis: PHY – Physics, BGC – Biogeochemical, DA – Data Assimilation, RAN - Reanalysis 3.1. The reduction of the temperature biases is gone 1 year after the assimilation stops. Due to such long temporal impacts of in situ data, even 12 profiles per day in the Arctic Ocean can generate significant positive impacts. Hence 12 T/S profiles per day in the Arctic can be regarded as the minimum spatial resolution required for data assimilation. Figure 2.3.1 All assimilated Temperature (left) and Salinity (right) profiles in the ARC MFC Physical reanalysis in the whole period 1992-2016. Table 2.3.2 Overview of the impact and priority assessment of in situ data in the ARC MFC (Xxxxxxx, 2018). Impact: “Real” = Has been documented. “Ongoing” = is being documented. “Ind.”: Indirect through calibration of remote sensing products. “Science”: Data is used for process studies. “None”: Data not available or insufficient. Priority A = urgent, B= Second priority, C: Not a priority for the time being. (Source: Xxxxxxx Xxxxxxx, 2018)
AutoNDA by SimpleDocs

Related to Arctic MFC (ARC MFC

  • Reverse ADSL Loops If a CLEC’s ADSL Transmission Unit (including those integrated into DSLAMs) is attached to Sprint’s Network and if an ADSL Copper Loop should start at an outside location, and is looped through a host or remote, and then to the subscriber, the copper plant from the outside location to the Sprint host or remote central office must be a facility dedicated to ADSL transmission only and not part of Sprint’s regular feeder or distribution plant.

  • Unbundled Copper Loop – Non-Designed (UCL-ND 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame to a customer’s premises (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 feet of bridged tap between the end user’s premises and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet in length, although the UCL-ND will not have a specific length limitation. For loops less than 18,000 feet and with less than 1300 Ohms resistance, the loop will provide a voice grade transmission channel suitable for loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point. 2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up process is not required to order and provision the UCL-ND. However, Lightyear can request Loop Make Up for which additional charges would apply. 2.4.3.3 At an additional charge, BellSouth also will make available Loop Testing so that Lightyear may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B of this Attachment. 2.4.3.4 UCL-ND loops are not intended to support any particular service and may be utilized by Lightyear to provide a wide-range of telecommunications services so long as those services do not adversely affect BellSouth’s network. The UCL-ND will include a Network Interface Device (NID) at the customer’s location for the purpose of connecting the loop to the customer’s inside wire. 2.4.3.5 Order Coordination (OC) will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) does not apply to this product. 2.4.3.6 Lightyear may use BellSouth’s Unbundled Loop Modification (ULM) offering to remove bridge tap and/or load coils from any loop within the BellSouth network. Therefore, some loops that would not qualify as UCL-ND could be transformed into loops that do qualify, using the ULM process.

  • Unbundled Copper Loop – Designed (UCL-D) 2.4.2.1 The UCL-D will be provisioned as a dry copper twisted pair (2- or 4-wire) Loop that is unencumbered by any intervening equipment (e.g., filters, load coils, range extenders, digital loop carrier, or repeaters). 2.4.2.2 A UCL-D will be 18,000 feet or less in length and is provisioned according to Resistance Design parameters, may have up to 6,000 feet of bridged tap and will have up to 1300 Ohms of resistance. 2.4.2.3 The UCL-D is a designed circuit, is provisioned with a test point, and comes standard with a DLR. OC is a chargeable option for a UCL-D; however, OC is always required on UCLs where a reuse of existing facilities has been requested by Telepak Networks. 2.4.2.4 These Loops are not intended to support any particular services and may be utilized by Telepak Networks to provide a wide-range of telecommunications services as long as those services do not adversely affect BellSouth’s network. This facility will include a Network Interface Device (NID) at the customer’s location for the purpose of connecting the Loop to the customer’s inside wire. 2.4.2.5 Upon the Effective Date of this Agreement, Unbundled Copper Loop – Long (UCL-L) elements will no longer be offered by BellSouth and no new orders for UCL-L will be accepted. Any existing UCL-Ls that were provisioned prior to the Effective Date of this Agreement will be grandfathered at the rates set forth in the Parties’ interconnection agreement that was in effect immediately prior to the Effective Date of this Agreement. Existing UCL-Ls that were provisioned prior to the Effective Date of this Agreement may remain connected, maintained and repaired according to BellSouth’s TR73600 and may remain connected until such time as they are disconnected by Telepak Networks or BellSouth provides ninety

  • Loop Provisioning Involving Integrated Digital Loop Carriers 2.6.1 Where Xxxx has requested an Unbundled Loop and BellSouth uses IDLC systems to provide the local service to the End User and BellSouth has a suitable alternate facility available, BellSouth will make such alternative facilities available to Xxxx. If a suitable alternative facility is not available, then to the extent it is technically feasible, BellSouth will implement one of the following alternative arrangements for Xxxx (e.g. hairpinning): 1. Roll the circuit(s) from the IDLC to any spare copper that exists to the customer premises. 2. Roll the circuit(s) from the IDLC to an existing DLC that is not integrated. 3. If capacity exists, provide "side-door" porting through the switch. 4. If capacity exists, provide "Digital Access Cross Connect System (DACS)- door" porting (if the IDLC routes through a DACS prior to integration into the switch). 2.6.2 Arrangements 3 and 4 above require the use of a designed circuit. Therefore, non- designed Loops such as the SL1 voice grade and UCL-ND may not be ordered in these cases. 2.6.3 If no alternate facility is available, and upon request from Xxxx, and if agreed to by both Parties, BellSouth may utilize its Special Construction (SC) process to determine the additional costs required to provision facilities. Xxxx will then have the option of paying the one-time SC rates to place the Loop.

  • COVID-19 Vaccine Passports Pursuant to Texas Health and Safety Code, Section 161.0085(c), Contractor certifies that it does not require its customers to provide any documentation certifying the customer’s COVID-19 vaccination or post-transmission recovery on entry to, to gain access to, or to receive service from the Contractor’s business. Contractor acknowledges that such a vaccine or recovery requirement would make Contractor ineligible for a state-funded contract.

  • Vendor Encouraging Members to bypass TIPS agreement Encouraging entities to purchase directly from the Vendor or through another agreement, when the Member has requested using the TIPS cooperative Agreement or price, and thereby bypassing the TIPS Agreement is a violation of the terms and conditions of this Agreement and will result in removal of the Vendor from the TIPS Program.

  • Agency Cross Transactions From time to time, the Advisor or brokers or dealers affiliated with it may find themselves in a position to buy for certain of their brokerage clients (each an "Account") securities which the Advisor's investment advisory clients wish to sell, and to sell for certain of their brokerage clients securities which advisory clients wish to buy. Where one of the parties is an advisory client, the Advisor or the affiliated broker or dealer cannot participate in this type of transaction (known as a cross transaction) on behalf of an advisory client and retain commissions from one or both parties to the transaction without the advisory client's consent. This is because in a situation where the Advisor is making the investment decision (as opposed to a brokerage client who makes his own investment decisions), and the Advisor or an affiliate is receiving commissions from both sides of the transaction, there is a potential conflicting division of loyalties and responsibilities on the Advisor's part regarding the advisory client. The Securities and Exchange Commission has adopted a rule under the Investment Advisers Act of 1940, as amended, which permits the Advisor or its affiliates to participate on behalf of an Account in agency cross transactions if the advisory client has given written consent in advance. By execution of this Agreement, the Trust authorizes the Advisor or its affiliates to participate in agency cross transactions involving an Account. The Trust may revoke its consent at any time by written notice to the Advisor.

  • Raising of the Capital in Connection with the Initial Business Combination If (x) the Company issues additional Ordinary Shares or equity-linked securities for capital raising purposes in connection with the closing of its initial Business Combination at an issue price or effective issue price of less than $9.20 per Ordinary Share (with such issue price or effective issue price to be determined in good faith by the Board and, in the case of any such issuance to the Sponsor or its affiliates, without taking into account any Class B ordinary shares, par value $0.0001 per share, of the Company held by the Sponsor or such affiliates, as applicable, prior to such issuance) (the “Newly Issued Price”), (y) the aggregate gross proceeds from such issuances represent more than 60% of the total equity proceeds, and interest thereon, available for the funding of the Company’s initial Business Combination on the date of the completion of the Company’s initial Business Combination (net of redemptions), and (z) the volume-weighted average trading price of Ordinary Shares during the twenty (20) trading day period starting on the trading day prior to the day on which the Company consummates its initial Business Combination (such price, the “Market Value”) is below $9.20 per share, the Warrant Price shall be adjusted (to the nearest cent) to be equal to 115% of the higher of the Market Value and the Newly Issued Price, the $18.00 per share redemption trigger price described in Section 6.1 and Section 6.2 shall be adjusted (to the nearest cent) to be equal to 180% of the higher of the Market Value and the Newly Issued Price and the $10.00 per share redemption trigger price described in Section 6.2 shall be adjusted (to the nearest cent) to be equal to the higher of the Market Value and the Newly Issued Price.

  • Processing Transactions 2 2.1 Timely Pricing and Orders.................................... 2 2.2

  • Voice Grade Unbundled Copper Sub-Loop Unbundled Sub-Loop Distribution – Intrabuilding Network Cable (aka riser cable)

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!