Assignment and Addition of Members
Assignment and Addition of Members Sample Clauses
Related to Assignment and Addition of Members
ASSIGNMENT AND AMENDMENTS This Agreement shall automatically terminate, without the payment of any penalty, in the event of its assignment (as defined in section 2(a)(4) of the 1940 Act); provided that such termination shall not relieve the Adviser of any liability incurred hereunder. This Agreement may not be added to or changed orally and may not be modified or rescinded except by a writing signed by the parties hereto and in accordance with the 1940 Act, when applicable.
ALTERATIONS AND ADDITIONS Tenant shall not make, or suffer to be made, any alteration or addition to the Premises, or any part thereof, without the written consent of Landlord first had and obtained by Tenant, but at the cost of Tenant, and any addition to, or alteration of, the Premises, except moveable furniture and trade fixtures, shall at once become a part of the Premises and belong to Landlord. If Landlord consents to the making of any alteration, addition, or improvement to or of the Premises by Tenant, the same shall be made by Landlord at Tenant’s sole cost and expense. Any modifications to the building or building systems required by governmental code or otherwise as a result of Tenant’s alterations, additions or improvements shall be made at Tenant’s sole cost and expense. Tenant shall retain title to all moveable furniture and trade fixtures placed in the Premises. All heating, lighting, electrical, air conditioning, partitioning, drapery, carpeting and floor installations made by Tenant, together with all property that has become an integral part of the Premises, shall not be deemed trade fixtures. Tenant agrees that it will not proceed to make any alterations or additions, without having obtained consent from Landlord to do so, and until five (5) days from the receipt of such consent, in order that Landlord may post appropriate notices to avoid any liability to contractors or material suppliers for payment for Tenant’s improvements. Tenant will at all times permit such notices to be posted and to remain posted until the completion of work. Tenant shall, if required by Landlord, secure at Tenant’s own cost and expense, a completion and lien indemnity bond, satisfactory to Landlord, for such work. Tenant further covenants and agrees that any mechanic’s lien filed against the Premises or against the Complex for work claimed to have been done for, or materials claimed to have been furnished to Tenant, will be discharged by Tenant, by bond or otherwise, within ten (10) days after the filing thereof, at the cost and expense of Tenant. Any exceptions to the foregoing must be made in writing and executed by both Landlord and Tenant. Pursuant to California Civil Code Section 1938, Landlord hereby notifies Tenant that as of the Effective Date, the Premises and Building have not undergone inspection by a “Certified Access Specialist” to determine whether the Premises meets all applicable construction related accessibility standards under California Civil Code Section 55.53
ASSIGNMENT AND SUB-LETTING Tenant shall not assign this Agreement, or sub-let or grant any license to use the Premises or any part thereof without the prior written consent of Landlord. A consent by Landlord to one such assignment, sub-letting or license shall not be deemed to be a consent to any subsequent assignment, sub-letting or license. An assignment, sub-letting or license without the prior written consent of Landlord or an assignment or sub-letting by operation of law shall be absolutely null and void and shall, at Landlord's option, terminate this Agreement.
Assignment and Amendment This Agreement may not be assigned by the Subadviser, and shall automatically terminate, without the payment of any penalty, in the event: (a) of its assignment, including any change in control of the Adviser or the Subadviser which is deemed to be an assignment under the 1940 Act, or (b) that the Advisory Agreement is assigned or terminates for any reason. Trades that were placed prior to such termination will not be canceled; however, no new trades will be placed after notice of such termination is received. Termination of this Agreement shall not relieve the Adviser or the Subadviser of any liability incurred hereunder. The terms of this Agreement shall not be changed unless such change is agreed to in writing by the parties hereto and is approved by the affirmative vote of a majority of the Trustees of the Trust voting in person, including a majority of the Trustees who are not interested persons of the Trust, the Adviser or the Subadviser, at a meeting called for the purpose of voting on such change, and (to the extent required by the 0000 Xxx) unless also approved at a meeting by the affirmative vote of the majority of outstanding voting securities of the Fund.
Assignment and Termination This Agreement shall not be assignable by any party except to successors to all or substantially all of the business of either the Consultant or the Company nor may this Agreement be terminated by either party for any reason whatsoever without the prior written consent of the other party, which consent may not be arbitrarily withheld by the party whose consent is required.
Alterations, Modifications and Additions Company will, or will cause a Permitted Lessee to, make (or cause to be made) such alterations and modifications in and additions to the Airframe and the Engines as are required from time to time to meet the applicable requirements of the FAA or any applicable government of any other jurisdiction in which the Aircraft is then registered; except for (i) immaterial and non-recurring violations with respect to which corrective measures are being taken promptly by Company (or, if a Lease is then in effect, any Permitted Lessee) upon discovery thereof and (ii) any law, rule, regulation or order the validity or application of which is being contested in good faith by Company (or, if a Lease is then in effect, any Permitted Lessee) in any manner which does not involve any material risk of sale, loss or forfeiture of the Aircraft and does not materially adversely affect Loan Trustee’s interest in the Aircraft. In addition, Company (or any Permitted Lessee), at its own expense, may from time to time add further parts or accessories and make or cause to be made such alterations and modifications in and additions to the Airframe or any Engine as Company (or any Permitted Lessee) deems desirable in the proper conduct of its business, including, without limitation, removal (without replacement) of Parts; provided that no such alteration, modification or addition shall materially diminish the value or utility of the Airframe or such Engine below its value or utility immediately prior to such alteration, modification or addition, assuming that the Airframe or such Engine was then in the condition required to be maintained by the terms of this Indenture, except that the value (but not the utility) of the Airframe or any Engine may be reduced by the value of any such Parts that are removed that Company (or such Permitted Lessee) deems obsolete or no longer suitable or appropriate for use on the Airframe or any Engine. For the avoidance of doubt, Company may make alterations in the passenger configuration of the Aircraft and such alterations shall not be subject to the immediately preceding sentence. All Parts incorporated or installed in or attached or added to the Airframe or any Engine as the result of such alteration, modification or addition shall, without further act, be subject to the Lien of this Indenture. Notwithstanding the foregoing, Company (or any Permitted Lessee) may, at any time, remove any Part from the Airframe or any Engine if such Part: (i) is in addition to, and not in replacement of or substitution for, any Part originally incorporated or installed in or attached to the Airframe or such Engine at the time of delivery thereof to Company or any Part in replacement of, or substitution for, any such Part, (ii) is not required to be incorporated or installed in or attached or added to the Airframe or such Engine pursuant to the first sentence of this Section 7.04(c) and (iii) can be removed from the Airframe or such Engine without materially diminishing the value or utility required to be maintained by the terms of this Indenture that the Airframe or such Engine would have had had such Part never been installed on the Airframe or such Engine. Upon the removal by Company (or any Permitted Lessee) of any Part as permitted by this Section 7.04(c), such removed Part shall, without further act, be free and clear of all rights and interests of Loan Trustee and the Lien of this Indenture and shall no longer be deemed a Part hereunder. Upon request of Company from time to time, Loan Trustee shall execute and deliver to Company instruments reasonably requested by Company confirming the release of any such removed Part from the Lien of this Indenture. Loan Trustee acknowledges that it has no interest in the Excluded Equipment. Notwithstanding the provisions of this Section 7.04(c) or any other term or condition of this Indenture, Company (or any Permitted Lessee) may from time to time install on, and remove from, the Aircraft equipment that is owned by, leased to or conditionally sold to Company (or any Permitted Lessee) (and title to such equipment shall remain vested in Company, such Permitted Lessee, or the lessor or the conditional vendor thereof) if (1) such equipment is Excluded Equipment and (2) the location affected by any such removal, if damaged, is repaired prior to return, in a workmanlike manner, to a condition suitable for commercial passenger service; provided that all costs of installation, removal and replacement shall be the responsibility of Company.
Assignment and Novation 34.1 The Supplier shall not assign, novate, or otherwise dispose of or create any trust in relation to any or all of its rights, obligations or liabilities under this Framework Agreement or any part of it without Approval. 34.2 The Authority may assign, novate or otherwise dispose of any or all of its rights, liabilities and obligations under this Framework Agreement or any part thereof to: 34.2.1 any Other Contracting Body; or 34.2.2 any Central Government Body or other body established by the Crown or under statute in order substantially to perform any of the functions that had previously been performed by the Authority; or 34.2.3 any private sector body which substantially performs the functions of the Authority, and the Supplier shall, at the Authority’s request, enter into a novation agreement in such form as the Authority shall reasonably specify in order to enable the Authority to exercise its rights pursuant to this Clause 34.2. 34.3 A change in the legal status of the Authority such that it ceases to be a Contracting Body shall not, subject to Clause 34.4 affect the validity of this Framework Agreement and this Framework Agreement shall be binding on any successor body to the Authority. 34.4 If the Authority assigns, novates or otherwise disposes of any of its rights, obligations or liabilities under this Framework Agreement to a body which is not a Contracting Body or if a body which is not a Contracting Body succeeds the Authority (both “Transferee” in the rest of this Clause) the right of termination of the Authority in Clause 30.4 (Termination on Insolvency) shall be available to the Supplier in the event of the insolvency of the Transferee (as if the references to Supplier in Clause 30.4 (Termination on Insolvency)) and to Supplier or Framework Guarantor or Call Off Guarantor in the definition of Insolvency Event were references to the Transferee.
Assignment and Conveyance The Assignor hereby conveys, sells, grants, transfers and assigns to the Assignee all of the right, title and interest of the Assignor, as purchaser, in, to and under (a) those certain Mortgage Loans listed on the schedule (the "Mortgage Loan Schedule") attached hereto as Exhibit A (the "Mortgage Loans") and (b) except as described below, that certain Mortgage Loan Purchase Agreement (the "Purchase Agreement"), dated as of [DATE], between the Assignor, as purchaser (the "Purchaser"), and the Company, as seller, solely insofar as the Purchase Agreement relates to the Mortgage Loans. The Assignor specifically reserves and does not assign to the Assignee hereunder (i) any and all right, title and interest in, to and under and any obligations of the Assignor with respect to any mortgage loans subject to the Purchase Agreement which are not the Mortgage Loans set forth on the Mortgage Loan Schedule and are not the subject of this Agreement or (ii) the rights of the Purchaser under Section 9.04 of the Purchase Agreement. Recognition of the Company
Assignment and Enurement This Agreement shall enure to the benefit of and be binding upon the Parties hereto and their respective successors and assigns. This Agreement may not be assigned by any party hereto without the prior consent of the other Parties hereto.
ASSIGNMENT AND SUB-CONTRACTING The benefit and burden of this Contract may not be assigned or sub-contracted in whole or in part by the Contractor without the prior written consent of the Department. Such consent may be given subject to any conditions which the Department considers necessary. The Department may withdraw its consent to any sub-contractor where it no longer has reasonable grounds to approve of the sub-contractor or the sub-contracting arrangement and where these grounds have been presented in writing to the Contractor.
