Common use of Bulk Migration Clause in Contracts

Bulk Migration. 2.1.10.1 BellSouth will make available to Ring Connection a Bulk Migration process pursuant to which Ring Connection may request to migrate port/loop combinations, provisioned pursuant to a separate agreement between the parties, to Loops (UNE-L). The Bulk Migration process may be used if such loop/port combinations are (1) associated with two (2) or more Existing Account Telephone Numbers (EATNs); and (2) located in the same Central Office. The terms and conditions for use of the Bulk Migration process are described in the BellSouth CLEC Information Package, incorporated herein by reference as it may be amended from time to time. The CLEC Information Package is located at xxx.xxxxxxxxxxxxxxx.xxxxxxxxx.xxx/xxxxxx/xxxx/xxxx.xxxx. The rates for the Bulk Migration process shall be the nonrecurring rates associated with the Loop type being requested on the Bulk Migration, as set forth in Exhibit A. Additionally, Operations Support Systems (OSS) charges will also apply. Loops connected to Integrated Digital Loop Carrier (IDLC) systems will be migrated pursuant to Section 2.6 below. 2.1.10.2 Should Ring Connection request migration for two (2) or more EATNs containing fifteen (15) or more circuits, Ring Connection must use the Bulk Migration process referenced in 2.1.11.1 above.

Bulk Migration. 2.1.10.1 2.1.11.1 BellSouth will make available to Ring Connection EZ Communications a Bulk Migration process pursuant to which Ring Connection EZ Communications may request to migrate port/loop combinations, provisioned pursuant to a separate agreement between the parties, to Loops (UNE-L). The Bulk Migration process may be used if such loop/port combinations are (1) associated with two (2) or more Existing Account Telephone Numbers (EATNs); and (2) located in the same Central Office. The terms and conditions for use of the Bulk Migration process are described in the BellSouth CLEC Information Package, incorporated herein by reference as it may be amended from time to time. The CLEC Information Package is located at xxx.xxxxxxxxxxxxxxx.xxxxxxxxx.xxx/xxxxxx/xxxx/xxxx.xxxx. The rates for the Bulk Migration process shall be the nonrecurring rates associated with the Loop type being requested on the Bulk Migration, as set forth in Exhibit A. Additionally, Operations Support Systems (OSS) charges will also apply. Loops connected to Integrated Digital Loop Carrier (IDLC) systems will be migrated pursuant to Section 2.6 below. 2.1.10.2 2.1.11.2 Should Ring Connection EZ Communications request migration for two (2) or more EATNs containing fifteen (15) or more circuits, Ring Connection EZ Communications must use the Bulk Migration process referenced in 2.1.11.1 above.

Bulk Migration. 2.1.10.1 BellSouth will make available to Ring Connection Trinity Connect a Bulk Migration process pursuant to which Ring Connection Trinity Connect may request to migrate port/loop combinations, provisioned pursuant to a separate agreement between the parties, to Loops (UNE-L). The Bulk Migration process may be used if such loop/port combinations are (1) associated with two (2) or more Existing Account Telephone Numbers (EATNs); and (2) located in the same Central Office. The terms and conditions for use of the Bulk Migration process are described in the BellSouth CLEC Information Package, incorporated herein by reference as it may be amended from time to time. The CLEC Information Package is located at xxx.xxxxxxxxxxxxxxx.xxxxxxxxx.xxx/xxxxxx/xxxx/xxxx.xxxx. The rates for the Bulk Migration process shall be the nonrecurring rates associated with the Loop type being requested on the Bulk Migration, as set forth in Exhibit A. Additionally, Operations Support Systems (OSS) charges will also apply. Loops connected to Integrated Digital Loop Carrier (IDLC) systems will be migrated pursuant to Section 2.6 below. 2.1.10.2 Should Ring Connection Trinity Connect request migration for two (2) or more EATNs containing fifteen (15) or more circuits, Ring Connection Trinity Connect must use the Bulk Migration process referenced in 2.1.11.1 above.

Bulk Migration. 2.1.10.1 2.1.12.1 BellSouth will make available to Ring Connection Quality Telephone a Bulk Migration process pursuant to which Ring Connection Quality Telephone may request to migrate port/loop combinations, provisioned pursuant to a separate agreement between the parties, to Loops (UNE-L). The Bulk Migration process may be used if such loop/port combinations are (1) associated with two (2) or more Existing Account Telephone Numbers (EATNs); and (2) located in the same Central Office. The terms and conditions for use of the Bulk Migration process are described in the BellSouth CLEC Information Package, incorporated herein by reference as it may be amended from time to time. The CLEC Information Package is located at xxx.xxxxxxxxxxxxxxx.xxxxxxxxx.xxx/xxxxxx/xxxx/xxxx.xxxx. The rates for the Bulk Migration process shall be the nonrecurring rates associated with the Loop type being requested on the Bulk Migration, as set forth in Exhibit A. Additionally, Operations Support Systems (OSS) charges will also apply. Loops connected to Integrated Digital Loop Carrier (IDLC) systems will be migrated pursuant to Section 2.6 below. 2.1.10.2 2.1.12.2 Should Ring Connection Quality Telephone request migration for two (2) or more EATNs containing fifteen (15) or more circuits, Ring Connection Quality Telephone must use the Bulk Migration process referenced in 2.1.11.1 above.

Bulk Migration. 2.1.10.1 BellSouth will make available to Ring Connection FeroNetworks a Bulk Migration process pursuant to which Ring Connection FeroNetworks may request to migrate port/loop combinations, provisioned pursuant to a separate agreement between the parties, to Loops (UNE-L). The Bulk Migration process may be used if such loop/port combinations are (1) associated with two (2) or more Existing Account Telephone Numbers (EATNs); and (2) located in the same Central Office. The terms and conditions for use of the Bulk Migration process are described in the BellSouth CLEC Information Package, incorporated herein by reference as it may be amended from time to time. The CLEC Information Package is located at xxx.xxxxxxxxxxxxxxx.xxxxxxxxx.xxx/xxxxxx/xxxx/xxxx.xxxx. The rates for the Bulk Migration process shall be the nonrecurring rates associated with the Loop type being requested on the Bulk Migration, as set forth in Exhibit A. Additionally, Operations Support Systems (OSS) charges will also apply. Loops connected to Integrated Digital Loop Carrier (IDLC) systems will be migrated pursuant to Section 2.6 below. 2.1.10.2 Should Ring Connection FeroNetworks request migration for two (2) or more EATNs containing fifteen (15) or more circuits, Ring Connection FeroNetworks must use the Bulk Migration process referenced in 2.1.11.1 above.

Bulk Migration. 2.1.10.1 BellSouth will make available to Ring Connection Deland Actel a Bulk Migration process pursuant to which Ring Connection Deland Actel may request to migrate port/loop combinations, provisioned pursuant to a separate agreement between the parties, to Loops (UNE-L). The Bulk Migration process may be used if such loop/port combinations are (1) associated with two (2) or more Existing Account Telephone Numbers (EATNs); and (2) located in the same Central Office. The terms and conditions for use of the Bulk Migration process are described in the BellSouth CLEC Information Package, incorporated herein by reference as it may be amended from time to time. The CLEC Information Package is located at xxx.xxxxxxxxxxxxxxx.xxxxxxxxx.xxx/xxxxxx/xxxx/xxxx.xxxx. The rates for the Bulk Migration process shall be the nonrecurring rates associated with the Loop type being requested on the Bulk Migration, as set forth in Exhibit A. Additionally, Operations Support Systems (OSS) charges will also apply. Loops connected to Integrated Digital Loop Carrier (IDLC) systems will be migrated pursuant to Section 2.6 below. 2.1.10.2 Should Ring Connection Deland Actel request migration for two (2) or more EATNs containing fifteen (15) or more circuits, Ring Connection Deland Actel must use the Bulk Migration process referenced in 2.1.11.1 above.

Bulk Migration. 2.1.10.1 BellSouth will make available to Ring Connection Spectrotel a Bulk Migration process pursuant to which Ring Connection Spectrotel may request to migrate port/loop combinations, provisioned pursuant to a separate agreement between the parties, to Loops (UNE-L). The Bulk Migration process may be used if such loop/port combinations are (1) associated with two (2) or more Existing Account Telephone Numbers (EATNs); and (2) located in the same Central Office. The terms and conditions for use of the Bulk Migration process are described in the BellSouth CLEC Information Package, incorporated herein by reference as it may be amended from time to time. The CLEC Information Package is located at xxx.xxxxxxxxxxxxxxx.xxxxxxxxx.xxx/xxxxxx/xxxx/xxxx.xxxx. The rates for the Bulk Migration process shall be the nonrecurring rates associated with the Loop type being requested on the Bulk Migration, as set forth in Exhibit A. Additionally, Operations Support Systems (OSS) charges will also apply. Loops connected to Integrated Digital Loop Carrier (IDLC) systems will be migrated pursuant to Section 2.6 below. 2.1.10.2 Should Ring Connection Spectrotel request migration for two (2) or more EATNs containing fifteen (15) or more circuits, Ring Connection Spectrotel must use the Bulk Migration process referenced in 2.1.11.1 above.

Bulk Migration. 2.1.10.1 BellSouth will make available to Ring Connection Network PTS a Bulk Migration process pursuant to which Ring Connection Network PTS may request to migrate port/loop combinations, provisioned pursuant to a separate agreement between the parties, to Loops (UNE-L). The Bulk Migration process may be used if such loop/port combinations are (1) associated with two (2) or more Existing Account Telephone Numbers (EATNs); and (2) located in the same Central Office. The terms and conditions for use of the Bulk Migration process are described in the BellSouth CLEC Information Package, incorporated herein by reference as it may be amended from time to time. The CLEC Information Package is located at xxx.xxxxxxxxxxxxxxx.xxxxxxxxx.xxx/xxxxxx/xxxx/xxxx.xxxx. The rates for the Bulk Migration process shall be the nonrecurring rates associated with the Loop type being requested on the Bulk Migration, as set forth in Exhibit A. Additionally, Operations Support Systems (OSS) charges will also apply. Loops connected to Integrated Digital Loop Carrier (IDLC) systems will be migrated pursuant to Section 2.6 below. 2.1.10.2 Should Ring Connection Network PTS request migration for two (2) or more EATNs containing fifteen (15) or more circuits, Ring Connection Network PTS must use the Bulk Migration process referenced in 2.1.11.1 above.

Bulk Migration. 2.1.10.1 BellSouth will make available to Ring Connection Southern Telcom a Bulk Migration process pursuant to which Ring Connection Southern Telcom may request to migrate port/loop combinations, provisioned pursuant to a separate agreement between the parties, to Loops (UNE-L). The Bulk Migration process may be used if such loop/port combinations are (1) associated with two (2) or more Existing Account Telephone Numbers (EATNs); and (2) located in the same Central Office. The terms and conditions for use of the Bulk Migration process are described in the BellSouth CLEC Information Package, incorporated herein by reference as it may be amended from time to time. The CLEC Information Package is located at xxx.xxxxxxxxxxxxxxx.xxxxxxxxx.xxx/xxxxxx/xxxx/xxxx.xxxx. The rates for the Bulk Migration process shall be the nonrecurring rates associated with the Loop type being requested on the Bulk Migration, as set forth in Exhibit A. Additionally, Operations Support Systems (OSS) charges will also apply. Loops connected to Integrated Digital Loop Carrier (IDLC) systems will be migrated pursuant to Section 2.6 below. 2.1.10.2 Should Ring Connection Southern Telcom request migration for two (2) or more EATNs containing fifteen (15) or more circuits, Ring Connection Southern Telcom must use the Bulk Migration process referenced in 2.1.11.1 above.

Bulk Migration. 2.1.10.1 2.1.11.1 BellSouth will make available to Ring Connection CommuniGroup a Bulk Migration process pursuant to which Ring Connection CommuniGroup may request to migrate port/loop combinations, provisioned pursuant to a separate agreement between the parties, to Loops (UNE-L). The Bulk Migration process may be used if such loop/port combinations are (1) associated with two (2) or more Existing Account Telephone Numbers (EATNs); and (2) located in the same Central Office. The terms and conditions for use of the Bulk Migration process are described in the BellSouth CLEC Information Package, incorporated herein by reference as it may be amended from time to time. The CLEC Information Package is located at xxx.xxxxxxxxxxxxxxx.xxxxxxxxx.xxx/xxxxxx/xxxx/xxxx.xxxx. The rates for the Bulk Migration process shall be the nonrecurring rates associated with the Loop type being requested on the Bulk Migration, as set forth in Exhibit A. Additionally, Operations Support Systems (OSS) charges will also apply. Loops connected to Integrated Digital Loop Carrier (IDLC) systems will be migrated pursuant to Section 2.6 below. 2.1.10.2 2.1.11.2 Should Ring Connection CommuniGroup request migration for two (2) or more EATNs containing fifteen (15) or more circuits, Ring Connection CommuniGroup must use the Bulk Migration process referenced in 2.1.11.1 above.

Bulk Migration. 2.1.10.1 BellSouth will make available to Ring Connection INET a Bulk Migration process pursuant to which Ring Connection INET may request to migrate port/loop combinations, provisioned pursuant to a separate agreement between the parties, to Loops (UNE-L). The Bulk Migration process may be used if such loop/port combinations are (1) associated with two (2) or more Existing Account Telephone Numbers (EATNs); and (2) located in the same Central Office. The terms and conditions for use of the Bulk Migration process are described in the BellSouth CLEC Information Package, incorporated herein by reference as it may be amended from time to time. The CLEC Information Package is located at xxx.xxxxxxxxxxxxxxx.xxxxxxxxx.xxx/xxxxxx/xxxx/xxxx.xxxx. The rates for the Bulk Migration process shall be the nonrecurring rates associated with the Loop type being requested on the Bulk Migration, as set forth in Exhibit A. Additionally, Operations Support Systems (OSS) charges will also apply. Loops connected to Integrated Digital Loop Carrier (IDLC) systems will be migrated pursuant to Section 2.6 below. 2.1.10.2 Should Ring Connection INET request migration for two (2) or more EATNs containing fifteen (15) or more circuits, Ring Connection INET must use the Bulk Migration process referenced in 2.1.11.1 above.

Bulk Migration. 2.1.10.1 BellSouth will make available to Ring Connection Seven Bridges a Bulk Migration process pursuant to which Ring Connection Seven Bridges may request to migrate port/loop combinations, provisioned pursuant to a separate agreement between the parties, to Loops (UNE-L). The Bulk Migration process may be used if such loop/port combinations are (1) associated with two (2) or more Existing Account Telephone Numbers (EATNs); and (2) located in the same Central Office. The terms and conditions for use of the Bulk Migration process are described in the BellSouth CLEC Information Package, incorporated herein by reference as it may be amended from time to time. The CLEC Information Package is located at xxx.xxxxxxxxxxxxxxx.xxxxxxxxx.xxx/xxxxxx/xxxx/xxxx.xxxx. The rates for the Bulk Migration process shall be the nonrecurring rates associated with the Loop type being requested on the Bulk Migration, as set forth in Exhibit A. Additionally, Operations Support Systems (OSS) charges will also apply. Loops connected to Integrated Digital Loop Carrier (IDLC) systems will be migrated pursuant to Section 2.6 below. 2.1.10.2 Should Ring Connection Seven Bridges request migration for two (2) or more EATNs containing fifteen (15) or more circuits, Ring Connection Seven Bridges must use the Bulk Migration process referenced in 2.1.11.1 above.

Bulk Migration. 2.1.10.1 2.1.11.1 BellSouth will make available to Ring Your Communication Connection Group a Bulk Migration process pursuant to which Ring Your Communication Connection Group may request to migrate port/loop combinations, provisioned pursuant to a separate agreement between the parties, to Loops (UNE-L). The Bulk Migration process may be used if such loop/port combinations are (1) associated with two (2) or more Existing Account Telephone Numbers (EATNs); and (2) located in the same Central Office. The terms and conditions for use of the Bulk Migration process are described in the BellSouth CLEC Information Package, incorporated herein by reference as it may be amended from time to time. The CLEC Information Package is located at xxx.xxxxxxxxxxxxxxx.xxxxxxxxx.xxx/xxxxxx/xxxx/xxxx.xxxx. The rates for the Bulk Migration process shall be the nonrecurring rates associated with the Loop type being requested on the Bulk Migration, as set forth in Exhibit A. Additionally, Operations Support Systems (OSS) charges will also apply. Loops connected to Integrated Digital Loop Carrier (IDLC) systems will be migrated pursuant to Section 2.6 below. 2.1.10.2 2.1.11.2 Should Ring Your Communication Connection Group request migration for two (2) or more EATNs containing fifteen (15) or more circuits, Ring Your Communication Connection Group must use the Bulk Migration process referenced in 2.1.11.1 above.

Bulk Migration. 2.1.10.1 2.1.11.1 BellSouth will make available to Ring Connection ConnectNow! a Bulk Migration process pursuant to which Ring Connection ConnectNow! may request to migrate port/loop combinations, provisioned pursuant to a separate agreement between the parties, to Loops (UNE-L). The Bulk Migration process may be used if such loop/port combinations are (1) associated with two (2) or more Existing Account Telephone Numbers (EATNs); and (2) located in the same Central Office. The terms and conditions for use of the Bulk Migration process are described in the BellSouth CLEC Information Package, incorporated herein by reference as it may be amended from time to time. The CLEC Information Package is located at xxx.xxxxxxxxxxxxxxx.xxxxxxxxx.xxx/xxxxxx/xxxx/xxxx.xxxx. The rates for the Bulk Migration process shall be the nonrecurring rates associated with the Loop type being requested on the Bulk Migration, as set forth in Exhibit A. Additionally, Operations Support Systems (OSS) charges will also apply. Loops connected to Integrated Digital Loop Carrier (IDLC) systems will be migrated pursuant to Section 2.6 below. 2.1.10.2 2.1.11.2 Should Ring Connection ConnectNow! request migration for two (2) or more EATNs containing fifteen (15) or more circuits, Ring Connection ConnectNow! must use the Bulk Migration process referenced in 2.1.11.1 above.

Bulk Migration. 2.1.10.1 BellSouth will make available to Ring Connection Nex-Phon a Bulk Migration process pursuant to which Ring Connection Nex-Phon may request to migrate port/loop combinations, provisioned pursuant to a separate agreement between the parties, to Loops (UNE-L). The Bulk Migration process may be used if such loop/port combinations are (1) associated with two (2) or more Existing Account Telephone Numbers (EATNs); and (2) located in the same Central Office. The terms and conditions for use of the Bulk Migration process are described in the BellSouth CLEC Information Package, incorporated herein by reference as it may be amended from time to time. The CLEC Information Package is located at xxx.xxxxxxxxxxxxxxx.xxxxxxxxx.xxx/xxxxxx/xxxx/xxxx.xxxx. The rates for the Bulk Migration process shall be the nonrecurring rates associated with the Loop type being requested on the Bulk Migration, as set forth in Exhibit A. Additionally, Operations Support Systems (OSS) charges will also apply. Loops connected to Integrated Digital Loop Carrier (IDLC) systems will be migrated pursuant to Section 2.6 below. 2.1.10.2 Should Ring Connection Nex-Phon request migration for two (2) or more EATNs containing fifteen (15) or more circuits, Ring Connection Nex-Phon must use the Bulk Migration process referenced in 2.1.11.1 above.

Bulk Migration. 2.1.10.1 BellSouth will make available to Ring Connection InterGlobe a Bulk Migration process pursuant to which Ring Connection InterGlobe may request to migrate port/loop combinations, provisioned pursuant to a separate agreement between the parties, to Loops (UNE-L). The Bulk Migration process may be used if such loop/port combinations are (1) associated with two (2) or more Existing Account Telephone Numbers (EATNs); and (2) located in the same Central Office. The terms and conditions for use of the Bulk Migration process are described in the BellSouth CLEC Information Package, incorporated herein by reference as it may be amended from time to time. The CLEC Information Package is located at xxx.xxxxxxxxxxxxxxx.xxxxxxxxx.xxx/xxxxxx/xxxx/xxxx.xxxx. The rates for the Bulk Migration process shall be the nonrecurring rates associated with the Loop type being requested on the Bulk Migration, as set forth in Exhibit A. Additionally, Operations Support Systems (OSS) charges will also apply. Loops connected to Integrated Digital Loop Carrier (IDLC) systems will be migrated pursuant to Section 2.6 below. 2.1.10.2 Should Ring Connection InterGlobe request migration for two (2) or more EATNs containing fifteen (15) or more circuits, Ring Connection InterGlobe must use the Bulk Migration process referenced in 2.1.11.1 above.

Bulk Migration. 2.1.10.1 BellSouth will make available to Ring Connection Speedy Reconnect a Bulk Migration process pursuant to which Ring Connection Speedy Reconnect may request to migrate port/loop combinations, provisioned pursuant to a separate agreement between the parties, to Loops (UNE-L). The Bulk Migration process may be used if such loop/port combinations are (1) associated with two (2) or more Existing Account Telephone Numbers (EATNs); and (2) located in the same Central Office. The terms and conditions for use of the Bulk Migration process are described in the BellSouth CLEC Information Package, incorporated herein by reference as it may be amended from time to time. The CLEC Information Package is located at xxx.xxxxxxxxxxxxxxx.xxxxxxxxx.xxx/xxxxxx/xxxx/xxxx.xxxx. The rates for the Bulk Migration process shall be the nonrecurring rates associated with the Loop type being requested on the Bulk Migration, as set forth in Exhibit A. Additionally, Operations Support Systems (OSS) charges will also apply. Loops connected to Integrated Digital Loop Carrier (IDLC) systems will be migrated pursuant to Section 2.6 below. 2.1.10.2 Should Ring Connection Speedy Reconnect request migration for two (2) or more EATNs containing fifteen (15) or more circuits, Ring Connection Speedy Reconnect must use the Bulk Migration process referenced in 2.1.11.1 above.

Bulk Migration. 2.1.10.1 BellSouth will make available to Ring Connection Micro-Comm a Bulk Migration process pursuant to which Ring Connection Micro-Comm may request to migrate port/loop combinations, provisioned pursuant to a separate agreement between the parties, to Loops (UNE-L). The Bulk Migration process may be used if such loop/port combinations are (1) associated with two (2) or more Existing Account Telephone Numbers (EATNs); and (2) located in the same Central Office. The terms and conditions for use of the Bulk Migration process are described in the BellSouth CLEC Information Package, incorporated herein by reference as it may be amended from time to time. The CLEC Information Package is located at xxx.xxxxxxxxxxxxxxx.xxxxxxxxx.xxx/xxxxxx/xxxx/xxxx.xxxx. The rates for the Bulk Migration process shall be the nonrecurring rates associated with the Loop type being requested on the Bulk Migration, as set forth in Exhibit A. Additionally, Operations Support Systems (OSS) charges will also apply. Loops connected to Integrated Digital Loop Carrier (IDLC) systems will be migrated pursuant to Section 2.6 below. 2.1.10.2 Should Ring Connection Micro-Comm request migration for two (2) or more EATNs containing fifteen (15) or more circuits, Ring Connection Micro-Comm must use the Bulk Migration process referenced in 2.1.11.1 above.

Bulk Migration. 2.1.10.1 BellSouth will make available to Ring Connection Utility USA a Bulk Migration process pursuant to which Ring Connection Utility USA may request to migrate port/loop combinations, provisioned pursuant to a separate agreement between the parties, to Loops (UNE-L). The Bulk Migration process may be used if such loop/port combinations are (1) associated with two (2) or more Existing Account Telephone Numbers (EATNs); and (2) located in the same Central Office. The terms and conditions for use of the Bulk Migration process are described in the BellSouth CLEC Information Package, incorporated herein by reference as it may be amended from time to time. The CLEC Information Package is located at xxx.xxxxxxxxxxxxxxx.xxxxxxxxx.xxx/xxxxxx/xxxx/xxxx.xxxx. The rates for the Bulk Migration process shall be the nonrecurring rates associated with the Loop type being requested on the Bulk Migration, as set forth in Exhibit A. Additionally, Operations Support Systems (OSS) charges will also apply. Loops connected to Integrated Digital Loop Carrier (IDLC) systems will be migrated pursuant to Section 2.6 below. 2.1.10.2 Should Ring Connection Utility USA request migration for two (2) or more EATNs containing fifteen (15) or more circuits, Ring Connection Utility USA must use the Bulk Migration process referenced in 2.1.11.1 above.

Bulk Migration. 2.1.10.1 BellSouth will make available to Ring Connection Rent-A-Line a Bulk Migration process pursuant to which Ring Connection Rent-A-Line may request to migrate port/loop combinations, provisioned pursuant to a separate agreement between the parties, to Loops (UNE-L). The Bulk Migration process may be used if such loop/port combinations are (1) associated with two (2) or more Existing Account Telephone Numbers (EATNs); and (2) located in the same Central Office. The terms and conditions for use of the Bulk Migration process are described in the BellSouth CLEC Information Package, incorporated herein by reference as it may be amended from time to time. The CLEC Information Package is located at xxx.xxxxxxxxxxxxxxx.xxxxxxxxx.xxx/xxxxxx/xxxx/xxxx.xxxx. The rates for the Bulk Migration process shall be the nonrecurring rates associated with the Loop type being requested on the Bulk Migration, as set forth in Exhibit A. Additionally, Operations Support Systems (OSS) charges will also apply. Loops connected to Integrated Digital Loop Carrier (IDLC) systems will be migrated pursuant to Section 2.6 below. 2.1.10.2 Should Ring Connection Rent-A-Line request migration for two (2) or more EATNs containing fifteen (15) or more circuits, Ring Connection Rent-A-Line must use the Bulk Migration process referenced in 2.1.11.1 above.

Bulk Migration. 2.1.10.1 BellSouth will make available to Ring Connection Excel PCHP a Bulk Migration process pursuant to which Ring Connection Excel PCHP may request to migrate port/loop combinations, provisioned pursuant to a separate agreement between the parties, to Loops (UNE-L). The Bulk Migration process may be used if such loop/port combinations are (1) associated with two (2) or more Existing Account Telephone Numbers (EATNs); and (2) located in the same Central Office. The terms and conditions for use of the Bulk Migration process are described in the BellSouth CLEC Information Package, incorporated herein by reference as it may be amended from time to time. The CLEC Information Package is located at xxx.xxxxxxxxxxxxxxx.xxxxxxxxx.xxx/xxxxxx/xxxx/xxxx.xxxx. The rates for the Bulk Migration process shall be the nonrecurring rates associated with the Loop type being requested on the Bulk Migration, as set forth in Exhibit A. Additionally, Operations Support Systems (OSS) charges will also apply. Loops connected to Integrated Digital Loop Carrier (IDLC) systems will be migrated pursuant to Section 2.6 below. 2.1.10.2 Should Ring Connection Excel PCHP request migration for two (2) or more EATNs containing fifteen (15) or more circuits, Ring Connection Excel PCHP must use the Bulk Migration process referenced in 2.1.11.1 above.

Bulk Migration. 2.1.10.1 BellSouth will make available to Ring Connection Latin American Telephone a Bulk Migration process pursuant to which Ring Connection Latin American Telephone may request to migrate port/loop combinations, provisioned pursuant to a separate agreement between the parties, to Loops (UNE-L). The Bulk Migration process may be used if such loop/port combinations are (1) associated with two (2) or more Existing Account Telephone Numbers (EATNs); and (2) located in the same Central Office. The terms and conditions for use of the Bulk Migration process are described in the BellSouth CLEC Information Package, incorporated herein by reference as it may be amended from time to time. The CLEC Information Package is located at xxx.xxxxxxxxxxxxxxx.xxxxxxxxx.xxx/xxxxxx/xxxx/xxxx.xxxx. The rates for the Bulk Migration process shall be the nonrecurring rates associated with the Loop type being requested on the Bulk Migration, as set forth in Exhibit A. Additionally, Operations Support Systems (OSS) charges will also apply. Loops connected to Integrated Digital Loop Carrier (IDLC) systems will be migrated pursuant to Section 2.6 below. 2.1.10.2 Should Ring Connection Latin American Telephone request migration for two (2) or more EATNs containing fifteen (15) or more circuits, Ring Connection Latin American Telephone must use the Bulk Migration process referenced in 2.1.11.1 above.

Bulk Migration. 2.1.10.1 BellSouth will make available to Ring Connection Global Crossing a Bulk Migration process pursuant to which Ring Connection Global Crossing may request to migrate port/loop combinations, provisioned pursuant to a separate agreement between the parties, to Loops (UNE-L). The Bulk Migration process may be used if such loop/port combinations are (1) associated with two (2) or more Existing Account Telephone Numbers (EATNs); and (2) located in the same Central Office. The terms and conditions for use of the Bulk Migration process are described in the BellSouth CLEC Information Package, incorporated herein by reference as it may be amended from time to time. The CLEC Information Package is located at xxx.xxxxxxxxxxxxxxx.xxxxxxxxx.xxx/xxxxxx/xxxx/xxxx.xxxx. The rates for the Bulk Migration process shall be the nonrecurring rates associated with the Loop type being requested on the Bulk Migration, as set forth in Exhibit A. Additionally, Operations Support Systems (OSS) charges will also apply. Loops connected to Integrated Digital Loop Carrier (IDLC) systems will be migrated pursuant to Section 2.6 below. 2.1.10.2 Should Ring Connection Global Crossing request migration for two (2) or more EATNs containing fifteen (15) or more circuits, Ring Connection Global Crossing must use the Bulk Migration process referenced in 2.1.11.1 above.

Bulk Migration. 2.1.10.1 BellSouth will make available to Ring Connection Comcast Phone a Bulk Migration process pursuant to which Ring Connection Comcast Phone may request to migrate port/loop combinations, provisioned pursuant to a separate agreement between the parties, to Loops (UNE-L). The Bulk Migration process may be used if such loop/port combinations are (1) associated with two (2) or more Existing Account Telephone Numbers (EATNs); and (2) located in the same Central Office. The terms and conditions for use of the Bulk Migration process are described in the BellSouth CLEC Information Package, incorporated herein by reference as it may be amended from time to time. The CLEC Information Package is located at xxx.xxxxxxxxxxxxxxx.xxxxxxxxx.xxx/xxxxxx/xxxx/xxxx.xxxx. The rates for the Bulk Migration process shall be the nonrecurring rates associated with the Loop type being requested on the Bulk Migration, as set forth in Exhibit A. Additionally, Operations Support Systems (OSS) charges will also apply. Loops connected to Integrated Digital Loop Carrier (IDLC) systems will be migrated pursuant to Section 2.6 below. 2.1.10.2 Should Ring Connection Comcast Phone request migration for two (2) or more EATNs containing fifteen (15) or more circuits, Ring Connection Comcast Phone must use the Bulk Migration process referenced in 2.1.11.1 above.

Bulk Migration. 2.1.10.1 BellSouth will make available to Ring Connection Xxxxxxx Telephone a Bulk Migration process pursuant to which Ring Connection Xxxxxxx Telephone may request to migrate port/loop combinations, provisioned pursuant to a separate agreement between the parties, to Loops (UNE-L). The Bulk Migration process may be used if such loop/port combinations are (1) associated with two (2) or more Existing Account Telephone Numbers (EATNs); and (2) located in the same Central Office. The terms and conditions for use of the Bulk Migration process are described in the BellSouth CLEC Information Package, incorporated herein by reference as it may be amended from time to time. The CLEC Information Package is located at xxx.xxxxxxxxxxxxxxx.xxxxxxxxx.xxx/xxxxxx/xxxx/xxxx.xxxx. The rates for the Bulk Migration process shall be the nonrecurring rates associated with the Loop type being requested on the Bulk Migration, as set forth in Exhibit A. Additionally, Operations Support Systems (OSS) charges will also apply. Loops connected to Integrated Digital Loop Carrier (IDLC) systems will be migrated pursuant to Section 2.6 below. 2.1.10.2 Should Ring Connection Xxxxxxx Telephone request migration for two (2) or more EATNs containing fifteen (15) or more circuits, Ring Connection Xxxxxxx Telephone must use the Bulk Migration process referenced in 2.1.11.1 above.

Bulk Migration. 2.1.10.1 2.1.12.1 BellSouth will make available to Ring Connection Clearwave Communications a Bulk Migration process pursuant to which Ring Connection Clearwave Communications may request to migrate port/loop combinations, provisioned pursuant to a separate agreement between the parties, to Loops (UNE-L). The Bulk Migration process may be used if such loop/port combinations are (1) associated with two (2) or more Existing Account Telephone Numbers (EATNs); and (2) located in the same Central Office. The terms and conditions for use of the Bulk Migration process are described in the BellSouth CLEC Information Package, incorporated herein by reference as it may be amended from time to time. The CLEC Information Package is located at xxx.xxxxxxxxxxxxxxx.xxxxxxxxx.xxx/xxxxxx/xxxx/xxxx.xxxx. The rates for the Bulk Migration process shall be the nonrecurring rates associated with the Loop type being requested on the Bulk Migration, as set forth in Exhibit A. Additionally, Operations Support Systems (OSS) charges will also apply. Loops connected to Integrated Digital Loop Carrier (IDLC) systems will be migrated pursuant to Section 2.6 below. 2.1.10.2 2.1.12.2 Should Ring Connection Clearwave Communications request migration for two (2) or more EATNs containing fifteen (15) or more circuits, Ring Connection Clearwave Communications must use the Bulk Migration process referenced in 2.1.11.1 above.

Bulk Migration. 2.1.10.1 BellSouth will make available to Ring Connection Universal Beepers a Bulk Migration process pursuant to which Ring Connection Universal Beepers may request to migrate port/loop combinations, provisioned pursuant to a separate agreement between the parties, to Loops (UNE-L). The Bulk Migration process may be used if such loop/port combinations are (1) associated with two (2) or more Existing Account Telephone Numbers (EATNs); and (2) located in the same Central Office. The terms and conditions for use of the Bulk Migration process are described in the BellSouth CLEC Information Package, incorporated herein by reference as it may be amended from time to time. The CLEC Information Package is located at xxx.xxxxxxxxxxxxxxx.xxxxxxxxx.xxx/xxxxxx/xxxx/xxxx.xxxx. The rates for the Bulk Migration process shall be the nonrecurring rates associated with the Loop type being requested on the Bulk Migration, as set forth in Exhibit A. Additionally, Operations Support Systems (OSS) charges will also apply. Loops connected to Integrated Digital Loop Carrier (IDLC) systems will be migrated pursuant to Section 2.6 below. 2.1.10.2 Should Ring Connection Universal Beepers request migration for two (2) or more EATNs containing fifteen (15) or more circuits, Ring Connection Universal Beepers must use the Bulk Migration process referenced in 2.1.11.1 above.

Bulk Migration. 2.1.10.1 2.1.12.1 BellSouth will make available to Ring Connection NGTelecom a Bulk Migration process pursuant to which Ring Connection NGTelecom may request to migrate port/loop combinations, provisioned pursuant to a separate agreement between the parties, to Loops (UNE-L). The Bulk Migration process may be used if such loop/port combinations are (1) associated with two (2) or more Existing Account Telephone Numbers (EATNs); and (2) located in the same Central Office. The terms and conditions for use of the Bulk Migration process are described in the BellSouth CLEC Information Package, incorporated herein by reference as it may be amended from time to time. The CLEC Information Package is located at xxx.xxxxxxxxxxxxxxx.xxxxxxxxx.xxx/xxxxxx/xxxx/xxxx.xxxx. The rates for the Bulk Migration process shall be the nonrecurring rates associated with the Loop type being requested on the Bulk Migration, as set forth in Exhibit A. Additionally, Operations Support Systems (OSS) charges will also apply. Loops connected to Integrated Digital Loop Carrier (IDLC) systems will be migrated pursuant to Section 2.6 below. 2.1.10.2 2.1.12.2 Should Ring Connection NGTelecom request migration for two (2) or more EATNs containing fifteen (15) or more circuits, Ring Connection NGTelecom must use the Bulk Migration process referenced in 2.1.11.1 above.

Bulk Migration. 2.1.10.1 BellSouth will make available to Ring Connection Home Telecom a Bulk Migration process pursuant to which Ring Connection Home Telecom may request to migrate port/loop combinations, provisioned pursuant to a separate agreement between the parties, to Loops (UNE-L). The Bulk Migration process may be used if such loop/port combinations are (1) associated with two (2) or more Existing Account Telephone Numbers (EATNs); and (2) located in the same Central Office. The terms and conditions for use of the Bulk Migration process are described in the BellSouth CLEC Information Package, incorporated herein by reference as it may be amended from time to time. The CLEC Information Package is located at xxx.xxxxxxxxxxxxxxx.xxxxxxxxx.xxx/xxxxxx/xxxx/xxxx.xxxx. The rates for the Bulk Migration process shall be the nonrecurring rates associated with the Loop type being requested on the Bulk Migration, as set forth in Exhibit A. Additionally, Operations Support Systems (OSS) charges will also apply. Loops connected to Integrated Digital Loop Carrier (IDLC) systems will be migrated pursuant to Section 2.6 below. 2.1.10.2 Should Ring Connection Home Telecom request migration for two (2) or more EATNs containing fifteen (15) or more circuits, Ring Connection Home Telecom must use the Bulk Migration process referenced in 2.1.11.1 2.1.10.1 above.