Increased Conversion Rate Applicable to Certain Notes Surrendered in Connection with Make-Whole Fundamental Changes (a) If the Effective Date of a Make-Whole Fundamental Change occurs prior to the Maturity Date and a Holder elects to convert its Notes in connection with such Make-Whole Fundamental Change, the Company shall, under the circumstances described below, increase the Conversion Rate for the Notes so surrendered for conversion by a number of additional shares of Common Stock (the “Additional Shares”), as described below. A conversion of Notes shall be deemed for these purposes to be “in connection with” such Make-Whole Fundamental Change if the relevant Notice of Conversion is received by the Conversion Agent from, and including, the Effective Date of the Make-Whole Fundamental Change up to, and including, the Business Day immediately prior to the related Fundamental Change Repurchase Date (or, in the case of a Make-Whole Fundamental Change that would have been a Fundamental Change but for subclause (i) of the proviso in clause (b) of the definition thereof, the 35th Trading Day immediately following the Effective Date of such Make-Whole Fundamental Change).
(b) Upon surrender of Notes for conversion in connection with a Make-Whole Fundamental Change, the Company shall, at its option, satisfy the related Conversion Obligation by Physical Settlement, Cash Settlement or Combination Settlement in accordance with Section 13.02 based on the Conversion Rate as increased to reflect the Additional Shares pursuant to the table below; provided, however, that if, at the effective time of a Make-Whole Fundamental Change described in clause (b) of the definition of Fundamental Change, the Reference Property following such Make-Whole Fundamental Change is composed entirely of cash, for any conversion of Notes following the Effective Date of such Make-Whole Fundamental Change, the Conversion Obligation shall be calculated based solely on the Stock Price for the transaction and shall be deemed to be an amount of cash per $1,000 principal amount of converted Notes equal to the Conversion Rate (including any adjustment for Additional Shares), multiplied by such Stock Price. In such event, the Conversion Obligation shall be determined and paid to Holders in cash on the second Business Day following the Conversion Date. The Company shall notify the Holders of Notes, the Trustee and the Conversion Agent (if other than the Trustee) of the Effective Date of any Make-Whole Fundamental Change no later than five Business Days after such Effective Date.
(c) The number of Additional Shares, if any, by which the Conversion Rate shall be increased shall be determined by reference to the table below, based on the date on which the Make-Whole Fundamental Change occurs or becomes effective (the “Effective Date”) and the price (the “Stock Price”) paid (or deemed to be paid) per share of the Common Stock in the Make-Whole Fundamental Change. If the holders of the Common Stock receive in exchange for their Common Stock only cash in a Make-Whole Fundamental Change described in clause (b) of the definition of Fundamental Change, the Stock Price shall be the cash amount paid per share. Otherwise, the Stock Price shall be the average of the Last Reported Sale Prices of the Common Stock over the five Trading Day period ending on, and including, the Trading Day immediately preceding the Effective Date of the Make-Whole Fundamental Change. The Board of Directors shall make appropriate adjustments to the Stock Price, in its good faith determination, to account for any adjustment to the Conversion Rate that becomes effective, or any event requiring an adjustment to the Conversion Rate where the Ex-Dividend Date, Effective Date (as such term is used in Section 13.04) or expiration date of the event occurs, during such five consecutive Trading Day period.
(d) The Stock Prices set forth in the column headings of the table below shall be adjusted as of any date on which the Conversion Rate of the Notes is otherwise adjusted. The adjusted Stock Prices shall equal the Stock Prices applicable immediately prior to such adjustment, multiplied by a fraction, the numerator of which is the Conversion Rate immediately prior to such adjustment giving rise to the Stock Price adjustment and the denominator of which is the Conversion Rate as so adjusted. The number of Additional Shares set forth in the table below shall be adjusted in the same manner and at the same time as the Conversion Rate as set forth in Section 13.04.
(e) The following table sets forth the number of Additional Shares of Common Stock by which the Conversion Rate shall be increased per $1,000 principal amount of Notes pursuant to this Section 13.03 for each Stock Price and Effective Date set forth below: Effective Date $33.46 $40.00 $41.50 $45.00 $50.00 $53.95 $60.00 $70.00 $80.00 $90.00 March 12, 2020 5.7900 3.2905 2.8889 2.1284 1.3680 0.9587 0.5487 0.2047 0.0603 0.0000 March 15, 2021 5.7900 3.1500 2.7227 1.9171 1.1254 0.7170 0.3408 0.0854 0.0106 0.0000 March 15, 2022 5.7900 2.9820 2.5369 1.6964 0.8416 0.3527 0.0000 0.0000 0.0000 0.0000 March 15, 2023 5.7900 2.7203 2.2689 1.4511 0.6842 0.2795 0.0000 0.0000 0.0000 0.0000 March 15, 2024 5.7900 2.2100 1.7414 0.9687 0.3828 0.1429 0.0000 0.0000 0.0000 0.0000 March 15, 2025 5.7900 0.9038 0.0002 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 The exact Stock Prices and Effective Dates may not be set forth in the table above, in which case:
(i) if the Stock Price is between two Stock Prices in the table above or the Effective Date is between two Effective Dates in the table above, the number of Additional Shares by which the Conversion Rate shall be increased shall be determined by a straight-line interpolation between the number of Additional Shares set forth for the higher and lower Stock Prices and the earlier and later Effective Dates, as applicable, based on a 365-day year;
(ii) if the Stock Price is greater than $90.00 per share (subject to adjustment in the same manner as the Stock Prices set forth in the column headings of the table above pursuant to subsection (d) above), no Additional Shares shall be added to the Conversion Rate; and
(iii) if the Stock Price is less than $33.46 per share (subject to adjustment in the same manner as the Stock Prices set forth in the column headings of the table above pursuant to subsection (d) above), no Additional Shares shall be added to the Conversion Rate. Notwithstanding the foregoing, in no event shall the Conversion Rate per $1,000 principal amount of Notes exceed 29.8864 shares of Common Stock, subject to adjustment in the same manner as the Conversion Rate pursuant to Section 13.04.
(f) Nothing in this Section 13.03 shall prevent an adjustment to the Conversion Rate pursuant to Section 13.04 in respect of a Make-Whole Fundamental Change.
Local Circuit Switching Capability, including Tandem Switching Capability 4.1.3.1 Definition
4.1.3.2 Notwithstanding BellSouth’s general duty to unbundle local circuit switching, BellSouth shall not be required to unbundle local circuit switching for <<customer_name>> when <<customer_name>> serves end-users with four (4) or more voice-grade (DS-0) equivalents or lines in locations served by BellSouth’s local circuit switches, which are in the following MSAs: Atlanta, GA; Miami, FL; Orlando, FL; Ft. Lauderdale, FL; Charlotte-Gastonia-Rock Hill, NC; Greensboro-Winston Salem-High Point, NC; Nashville, TN; and New Orleans, LA, and BellSouth has provided non-discriminatory cost based access to the Enhanced Extended Link (EEL) throughout Density Zone 1 as determined by NECA Tariff No. 4 as in effect on January 1, 1999.
4.1.3.3 In the event that <<customer_name>> orders local circuit switching for a single end user account name at a single physical end user location with four (4) or more 2-wire voice-grade loops from a BellSouth central office in an MSA listed above, BellSouth shall charge <<customer_name>> the market based rate in Exhibit C for use of the local circuit switching functionality for the affected facilities.
4.1.3.4 A featureless port is one that has a line port, switching facilities, and an interoffice port. A featured port is a port that includes all features then capable or a number of then capable features specifically requested by <<customer_name>>. Any features that are not currently then capable but are technically feasible through the switch can be requested through the NBR/BFR process.
4.1.3.5 BellSouth will provide to <<customer_name>> customized routing of calls: (i) to a requested directory assistance services platform; (ii) to an operator services platform pursuant to Section 10 of Attachment 2; (iii) for <<customer_name>>’s PIC’ed toll traffic in a two (2) PIC environment to an alternative OS/DA platform designated by <<customer_name>>. <<customer_name>> customers may use the same dialing arrangements as BellSouth customers.
4.1.3.6 Remote Switching Module functionality is included in Switching Capability. The switching capabilities used will be based on the line side features they support.
4.1.3.7 Switching Capability will also be capable of routing local, intraLATA, interLATA, and calls to international customer’s preferred carrier; call features (e.g. call forwarding) and Centrex capabilities.
4.1.3.8 Where required to do so in order to comply with an effective Commission order, BellSouth will provide to <<customer_name>> purchasing local BellSouth switching and reselling BellSouth local exchange service under Attachment 1, selective routing of calls to a requested directory assistance services platform or operator services platform. <<customer_name>> customers may use the same dialing arrangements as BellSouth customers, but obtain a <<customer_name>> branded service.
DISTRIBUTION OF CONTRACTOR PRICE LIST AND CONTRACT APPENDICES Contractor shall provide Authorized Users with electronic copies of the Contract, including price lists and Appendices, upon request. Contract Updates will be handled as provided in Appendix C – Contract Modification Procedures.
QUANTITY CHANGES PRIOR TO AWARD The Commissioner reserves the right, at any time prior to the award of a specific quantity Contract, to alter in good faith the quantities listed in the Bid Specifications. In the event such right is exercised, the lowest responsible Bidder meeting Bid Specifications will be advised of the revised quantities and afforded an opportunity to extend or reduce its Bid price in relation to the changed quantities. Refusal by the low Bidder to so extend or reduce its Bid price may result in the rejection of its Bid and the award of such Contract to the lowest responsible Bidder who accepts the revised qualifications.
Price Adjustments for OGS Centralized Contracts Periodic price adjustments will occur no more than twice per year on a schedule to be established solely by OGS. Pricing offered shall be fixed for the first twelve (12) months of the Contract term. Such price increases will only apply to the OGS Centralized Contracts and shall not be applied retroactively to Authorized User Agreements or any Mini-bids already submitted to an Authorized User. Price decreases may be made at any time. Additionally, some price decreases shall be calculated in accordance with Appendix B, section 17, Pricing.
Interconnection Facility Options The Intercarrier Compensation provisions of this Agreement shall apply to the exchange of Exchange Service (EAS/Local) traffic between CLEC's network and Qwest's network. Where either Party acts as an IntraLATA Toll provider, each Party shall xxxx the other the appropriate charges pursuant to its respective tariff or price lists. Where either Party interconnects and delivers traffic to the other from third parties, each Party shall xxxx such third parties the appropriate charges pursuant to its respective tariffs, price lists or contractual offerings for such third party terminations. Absent a separately negotiated agreement to the contrary, the Parties will directly exchange traffic between their respective networks without the use of third party transit providers.
Unbundled Loop Modifications (Line Conditioning 2.5.1 Line Conditioning is defined as routine network modification that BellSouth regularly undertakes to provide xDSL services to its own customers. This may include the removal of any device, from a copper Loop or copper Subloop that may diminish the capability of the Loop or Subloop to deliver high-speed switched wireline telecommunications capability, including xDSL service. Such devices include, load coils, excessive bridged taps, low pass filters, and range extenders. Excessive bridged taps are bridged taps that serves no network design purpose and that are beyond the limits set according to industry standards and/or the BellSouth’s TR 73600 Unbundled Local Loop Technical Specification.
2.5.2 BellSouth will remove load coils only on copper Loops and Subloops that are less than eighteen thousand (18,000) feet in length.
2.5.3 For any copper loop being ordered by NewPhone which has over six thousand (6,000) feet of combined bridged tap will be modified, upon request from NewPhone, so that the loop will have a maximum of six thousand (6,000) feet of bridged tap. This modification will be performed at no additional charge to NewPhone. Loop conditioning orders that require the removal of bridged tap that serves no network design purpose on a copper Loop that will result in a combined total of bridged tap between two thousand five hundred (2,500) and six thousand (6,000) feet will be performed at the rates set forth in Exhibit A.
2.5.4 NewPhone may request removal of any unnecessary and non-excessive bridged tap (bridged tap between zero (0) and two thousand five hundred (2,500) feet which serves no network design purpose), at rates pursuant to BellSouth’s SC Process as mutually agreed to by the Parties.
2.5.5 Rates for ULM are as set forth in Exhibit A.
2.5.6 BellSouth will not modify a Loop in such a way that it no longer meets the technical parameters of the original Loop type (e.g., voice grade, ADSL, etc.) being ordered.
2.5.7 If NewPhone requests ULM on a reserved facility for a new Loop order, BellSouth may perform a pair change and provision a different Loop facility in lieu of the reserved facility with ULM if feasible. The Loop provisioned will meet or exceed specifications of the requested Loop facility as modified. NewPhone will not be charged for ULM if a different Loop is provisioned. For Loops that require a DLR or its equivalent, BellSouth will provide LMU detail of the Loop provisioned.
2.5.8 NewPhone shall request Loop make up information pursuant to this Attachment prior to submitting a service inquiry and/or a LSR for the Loop type that NewPhone desires BellSouth to condition.
2.5.9 When requesting ULM for a Loop that BellSouth has previously provisioned for NewPhone, NewPhone will submit a SI to BellSouth. If a spare Loop facility that meets the Loop modification specifications requested by NewPhone is available at the location for which the ULM was requested, NewPhone will have the option to change the Loop facility to the qualifying spare facility rather than to provide ULM. In the event that BellSouth changes the Loop facility in lieu of providing ULM, NewPhone will not be charged for ULM but will only be charged the service order charges for submitting an order.
Provisioning Line Splitting and Splitter Space 3.8.1 The Data LEC, Voice CLEC or BellSouth may provide the splitter. When Southern Telecom or its authorized agent owns the splitter, Line Splitting requires the following: a non-designed analog Loop from the serving wire center to the NID at the End User’s location; a collocation cross connection connecting the Loop to the collocation space; a second collocation cross connection from the collocation space connected to a voice port; the high frequency spectrum line activation, and a splitter. The Loop and port cannot be a Loop and port combination (i.e. UNE-P), but must be individual stand-alone Network Elements. When BellSouth owns the splitter, Line Splitting requires the following: a non designed analog Loop from the serving wire center to the NID at the End User’s location with CFA and splitter port assignments, and a collocation cross connection from the collocation space connected to a voice port.
3.8.2 An unloaded 2-wire copper Loop must serve the End User. The meet point for the Voice CLEC and the Data LEC is the point of termination on the MDF for the Data LEC's cable and pairs.
3.8.3 The foregoing procedures are applicable to migration to Line Splitting Service from a UNE-P arrangement, BellSouth Retail Voice Service, BellSouth High Frequency Spectrum (CO Based) Line Sharing.
3.8.4 For other migration scenarios to line splitting, BellSouth will work cooperatively with CLECs to develop methods and procedures to develop a process whereby a Voice CLEC and a Data LEC may provide services over the same Loop.
Designation of Additional Amounts to Be Included in the Excess Spread Amount for the DiscoverSeries Notes At any time that any outstanding Series of certificates issued by the Master Trust provides that the Series Principal Collections allocated to such Series will be deposited into the Group Finance Charge Collections Reallocation Account for the Master Trust to the extent necessary for application to cover shortfalls for other Series issued by the Master Trust, an amount equal to (x) all Series Principal Collections allocated to such Series, multiplied by (y) a fraction, the numerator of which is the sum of the Nominal Liquidation Amounts for each outstanding Tranche of the DiscoverSeries Notes (including these notes) and the denominator of which is (i) the Aggregate Investor Interest for the Master Trust minus (ii) the sum of the Series Investor Interests for all such Series that provide that the Series Principal Collections allocated to such Series will be so deposited, is hereby designated to be included in the Excess Spread Amount and shall be treated as Series Finance Charge Amounts for the DiscoverSeries.
Number Resources, Rate Center Areas and Routing Points 8.1 Nothing in this Agreement shall be construed to limit or otherwise adversely affect in any manner either Party’s right to employ or to request and be assigned any Central Office Codes (“NXX”) pursuant to the Central Office Code Assignment Guidelines and any relevant FCC or Commission orders, as may be amended from time to time, or to establish, by Tariff or otherwise, Rate Center Areas and Routing Points corresponding to such NXX codes.
8.2 It shall be the responsibility of each Party to program and update its own switches and network systems pursuant to information provided in the LERG in order to recognize and route traffic to the other Party’s assigned NXX codes. Except as expressly set forth in this Agreement, neither Party shall impose any fees or charges whatsoever on the other Party for such activities.
8.3 Unless otherwise required by Commission order, the Rate Center Areas will be the same for each Party. During the term of this Agreement, Onvoy shall adopt the Rate Center Area and Rate Center Points that the Commission has approved for Frontier within the LATA and Tandem serving area. Onvoy shall assign whole NPA-NXX codes to each Rate Center Area unless otherwise ordered by the FCC, the Commission or another governmental entity of appropriate jurisdiction, or the LEC industry adopts alternative methods of utilizing NXXs.
8.4 Onvoy will also designate a Routing Point for each assigned NXX code. Onvoy shall designate one location for each Rate Center Area in which the Onvoy has established NXX code(s) as the Routing Point for the NPA-NXXs associated with that Rate Center Area, and such Routing Point shall be within the same LATA as the Rate Center Area but not necessarily within the Rate Center Area itself. Unless specified otherwise, calls to subsequent NXXs of Onvoy will be routed in the same manner as calls to Xxxxx’s initial NXXs.
8.5 Notwithstanding anything to the contrary contained herein, nothing in this Agreement is intended, and nothing in this Agreement shall be construed, to in any way constrain Onvoy’s choices regarding the size of the local calling area(s) that Onvoy may establish for its Customers, which local calling areas may be larger than, smaller than, or identical to Frontier’s local calling areas.
