Carbon Steel Nuts Sample Clauses
Carbon Steel Nuts. Nuts for carbon steel bolts shall be heavy hex nuts meeting the requirements of ASTM A563, Grade DH3.
Carbon Steel Nuts. Plain Washers
CONTRACT USAGE AGREEMENT PARTIES Any of the following types of entities that have executed a Contract Usage Agreement with Enterprise Services: ▪ Political subdivisions (e.g., counties, cities, school districts, public utility districts) in the State of Washington; ▪ Federal governmental agencies or entities; ▪ Public-benefit nonprofit corporations (i.e., § 501(c)(3) nonprofit corporations that receive federal, state, or local funding); and ▪ Federally-recognized Indian Tribes located in the State of Washington.
Unbundled Copper Loop – Designed (UCL-D) 2.4.2.1 The UCL-D will be provisioned as a dry copper twisted pair (2- or 4-wire) Loop that is unencumbered by any intervening equipment (e.g., filters, load coils, range extenders, digital loop carrier, or repeaters). 2.4.2.2 A UCL-D will be 18,000 feet or less in length and is provisioned according to Resistance Design parameters, may have up to 6,000 feet of bridged tap and will have up to 1300 Ohms of resistance. 2.4.2.3 The UCL-D is a designed circuit, is provisioned with a test point, and comes standard with a DLR. OC is a chargeable option for a UCL-D; however, OC is always required on UCLs where a reuse of existing facilities has been requested by Telepak Networks. 2.4.2.4 These Loops are not intended to support any particular services and may be utilized by Telepak Networks to provide a wide-range of telecommunications services as long as those services do not adversely affect BellSouth’s network. This facility will include a Network Interface Device (NID) at the customer’s location for the purpose of connecting the Loop to the customer’s inside wire. 2.4.2.5 Upon the Effective Date of this Agreement, Unbundled Copper Loop – Long (UCL-L) elements will no longer be offered by BellSouth and no new orders for UCL-L will be accepted. Any existing UCL-Ls that were provisioned prior to the Effective Date of this Agreement will be grandfathered at the rates set forth in the Parties’ interconnection agreement that was in effect immediately prior to the Effective Date of this Agreement. Existing UCL-Ls that were provisioned prior to the Effective Date of this Agreement may remain connected, maintained and repaired according to BellSouth’s TR73600 and may remain connected until such time as they are disconnected by Telepak Networks or BellSouth provides ninety
Company Subsidiaries; Equity Interests (a) The Company Disclosure Letter lists each Company Subsidiary and its jurisdiction of organization. Except as specified in the Company Disclosure Letter, all the outstanding shares of capital stock or equity investments of each Company Subsidiary have been validly issued and are fully paid and nonassessable and are as of the date of this Agreement owned by the Company, by another Company Subsidiary or by the Company and another Company Subsidiary, free and clear of all Liens. (b) Except for its interests in the Company Subsidiaries, the Company does not as of the date of this Agreement own, directly or indirectly, any capital stock, membership interest, partnership interest, joint venture interest or other equity interest in any person.
Unbundled Copper Loop – Non-Designed (UCL-ND 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame to a customer’s premises (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 feet of bridged tap between the end user’s premises and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet in length, although the UCL-ND will not have a specific length limitation. For loops less than 18,000 feet and with less than 1300 Ohms resistance, the loop will provide a voice grade transmission channel suitable for loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point. 2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up process is not required to order and provision the UCL-ND. However, Talk America can request Loop Make Up for which additional charges would apply. 2.4.3.3 At an additional charge, BellSouth also will make available Loop Testing so that Talk America may request further testing on the UCL-ND. 2.4.3.4 UCL-ND loops are not intended to support any particular service and may be utilized by Talk America to provide a wide-range of telecommunications services so long as those services do not adversely affect BellSouth’s network. The UCL- ND will include a Network Interface Device (NID) at the customer’s location for the purpose of connecting the loop to the customer’s inside wire. 2.4.3.5 Order Coordination (OC) will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) does not apply to this product. 2.4.3.6 Talk America may use BellSouth’s Unbundled Loop Modification (ULM) offering to remove bridge tap and/or load coils from any loop within the BellSouth network. Therefore, some loops that would not qualify as UCL-ND could be transformed into loops that do qualify, using the ULM process.
Company Lock Up Agreements The Company, on behalf of itself and any successor entity, agrees that, without the prior written consent of the Placement Agent, it will not for a period of thirty (30) days after the date of this Agreement (the “Lock-Up Period”), (i) offer, pledge, sell, contract to sell, sell any option or contract to purchase, purchase any option or contract to sell, grant any option, right or warrant to purchase, lend, or otherwise transfer or dispose of, directly or indirectly, any ADSs, Ordinary Shares or other capital stock of the Company or any securities convertible into or exercisable or exchangeable for ADSs, Ordinary Shares or such other shares of capital stock of the Company; (ii) file or cause to be filed any registration statement with the Commission relating to the offering of any ADSs, Ordinary Shares or other shares of capital stock of the Company or any securities convertible into or exercisable or exchangeable for shares of capital stock of the Company; or (iii) complete any offering of debt securities of the Company, other than entering into a line of credit with a traditional bank or (iv) enter into any swap or other arrangement that transfers to another, in whole or in part, any of the economic consequences of ownership of ADSs, Ordinary Shares or other capital stock of the Company, whether any such transaction described in clause (i), (ii), (iii) or (iv) above is to be settled by delivery of ADSs, Ordinary Shares or other shares of capital stock of the Company or such other securities, in cash or otherwise. The restrictions contained in this Section 3.18 shall not apply to (i) the ADSs, Ordinary Shares and the Placement Agent’s Warrant, (ii) the issuance by the Company of ADSs upon the exercise of the Placement Agent’s Warrant or a stock option or warrant or the conversion of a security outstanding on the date hereof, or issuable pursuant to currently existing undertakings of the Company, which is disclosed in the Registration Statement, Disclosure Package and Prospectus, provided that such options, warrants, and securities have not been amended since the date of this Agreement to increase the number of such securities or to decrease the exercise price, exchange price or conversion price of such securities or to extend the term of such securities, (iii) the issuance by the Company of stock options, shares of capital stock of the Company or other awards under any equity compensation plan of the Company, provided that the underlying shares shall be restricted from sale during the entire Lock-Up Period; and (iv) transactions with members of the management and/or the board of directors of the Company, involving the issuance of equity securities of the Company in consideration of cash, provided that the underlying shares shall be restricted from sale during the entire Lock-Up Period.
Business Contracts (a) Schedule 1.1(d) lists each agreement (whether written or oral and including all amendments and supplements thereto) relating to the Business to which Sellers are a party or beneficiary or by which Sellers (in respect of the Business) or any of the Assets is bound or otherwise obligated for which Sellers have provided staffing services at any time during the period beginning on January 1, 2022 and ending on the Closing Date, including all customer contracts, purchase orders and statements of work (collectively, the “Customer Contracts”). Each Customer Contract represents the entire agreement between Sellers and the other party or parties thereto. Subject to obtaining any necessary third Person consents pursuant to Section 4.8, each Customer Contract will continue to be binding in accordance with its terms following the Closing Date, and the closing of the transactions contemplated hereby and will not result in an actual or potential default, or require the payment of any sum of money, under any Customer Contract (with or without the lapse of time or giving of notice, or both). (b) Schedule 2.14(b) lists a generic description of each of the employment-related agreements and policies applicable to Billable Personnel (collectively, the “Billable Personnel Contracts”). Each Temporary Personnel Contract represents the entire agreement between Sellers and the other party or parties thereto. Subject to obtaining any necessary third Person consents pursuant to Section 4.8, each Billable Personnel Contract will continue to be binding in accordance with its terms following the Closing Date and the closing of the transactions contemplated hereby and will not result in an actual or potential default, or require the payment of any sum of money not contemplated by Section 4.3(c), under any Billable Personnel Contract (with or without the lapse of time or giving of notice, or both). (c) Schedule 1.1(f) lists each agreement (whether written or oral and including all amendments and supplements thereto) relating to the Business to which Sellers are a party or beneficiary or by which Sellers (in respect of the Business) or any of the Assets is bound or otherwise obligated relating to the Billable Staffing Independent Contractors who are providing billable services on the date hereof (collectively, the “Billable Staffing Independent Contractor Contracts”). Each Billable Staffing Independent Contractor Contract represents the entire agreement between Sellers and the other party or parties thereto. Subject to obtaining any necessary third Person consents pursuant to Section 4.8, each Billable Staffing Independent Contractor Contract will continue to be binding in accordance with its terms following the Closing Date and the closing of the transactions contemplated hereby the closing of the transactions contemplated hereby and will not result in an actual or potential default, or require the payment of any sum of money, under any Billable Staffing Independent Contractor Contract (with or without the lapse of time or giving of notice, or both). (d) Schedule 2.14(d) lists the following currently effective agreements (whether written or oral and including all amendments and supplements thereto) relating to the Business to which Sellers are a party or beneficiary or by which Sellers (in respect of the Business) or any of the Assets is bound or otherwise obligated, which is not listed in any other Schedule (collectively with the agreements and policies listed in the other Schedules, the “Business Contracts”): (i) real estate leases; (ii) agreements evidencing, securing or otherwise relating to any Indebtedness for which Sellers are, directly or indirectly, liable; (iii) capital or operating leases or conditional sales agreements relating to vehicles, equipment or other Assets that are material to the Business; (iv) agreements pursuant to which Sellers are entitled or obligated to either acquire any assets from, or sell any assets to, a third Person; (v) insurance policies; (vi) employment, consulting, noncompetition, separation, collective bargaining, union or labor agreements or arrangements; and (vii) agreements with or for the benefit of the Selling Person, or any director, manager, officer or employee of Sellers employed in the Business, or any Affiliate or immediate family member thereof. (e) Sellers have delivered to Buyer a true, correct and complete copy of each written Business Contract and a written, detailed summary of each material term of each oral Business Contract. Each Business Contract is valid, binding and in full force and effect and enforceable in accordance with its terms, except as such enforceability may be limited by applicable bankruptcy, insolvency, fraudulent conveyance or similar Laws affecting the enforcement of creditors’ rights generally and subject to general principles of equity (regardless of whether enforcement is sought in a Proceeding at law or in equity). Sellers have performed all of their material obligations under each Business Contract, and there exists no breach or default (or event that with notice or lapse of time would constitute a breach or default) on the part of Sellers or, to the Knowledge of Sellers, on the part of any other Person under any Business Contract. There has been no termination or notice of default or, to the Knowledge of Sellers, any threatened termination under any Business Contract. To the Knowledge of Sellers, no party to any Business Contract intends to alter its relationship with the Business as a result of or in connection with the acquisition contemplated by this Agreement.
Supply Agreements For a period of three years from the consummation of the IPO, Odetics shall not unilaterally terminate or assign its guarantee obligation with respect to any supply agreement pursuant to which it has guaranteed the performance by ATL of ATL's obligations, unless such suppliers have consented to the termination or assignment of such guarantee.
TIPS Sales and Supplemental Agreements If awarded, when making a sale under this awarded contract, the terms of the specific TIPS order, including but not limited to: shipping, freight, insurance, delivery, fees, bonding, cost, delivery expectations and location, returns, refunds, terms, conditions, cancellations, defects, order assistance, etc., shall be controlled by the purchase agreement (Purchase Order, Contract, AIA Contract, Invoice, etc.) (“Supplemental Agreement” as used herein) entered into between the TIPS Member Customer and Vendor only. TIPS is not a party to any Supplemental Agreement. All Supplemental Agreements shall include Vendor’s Name, as known to TIPS, and TIPS Contract Name and Number. Vendor accepts and understands that TIPS is not a legal party to TIPS Sales and Vendor is solely responsible for identifying fraud, mistakes, unacceptable terms, or misrepresentations for the specific order prior to accepting. Vendor agrees that any order issued from a customer to Vendor, even when processed through TIPS, constitutes a legal contract between the customer and Vendor only. When Vendor accepts or fulfills an order, even when processed through TIPS, Vendor is representing that Vendor has carefully reviewed the order for legality, authenticity, and accuracy and TIPS shall not be liable or responsible for the same. In the event of a conflict between the terms of this TIPS Vendor Agreement and those contained in any Supplemental Agreement, the provisions set forth herein shall control unless otherwise agreed to and authorized by the Parties in writing within the Supplemental Agreement. The Supplemental Agreement shall dictate the scope of services, the project delivery expectations, the scheduling of projects and milestones, the support requirements, and all other terms applicable to the specific sale(s) between the Vendor and the TIPS Member.
Vendor Encouraging Members to bypass TIPS agreement Encouraging entities to purchase directly from the Vendor or through another agreement, when the Member has requested using the TIPS cooperative Agreement or price, and thereby bypassing the TIPS Agreement is a violation of the terms and conditions of this Agreement and will result in removal of the Vendor from the TIPS Program.
Critical Infrastructure Subcontracts For purposes of this Paragraph, the designated countries are China, Iran, North Korea, Russia, and any countries lawfully designated by the Governor as a threat to critical infrastructure. Pursuant to Section 113.002 of the Business and Commerce Code, Contractor shall not enter into a subcontract that will provide direct or remote access to or control of critical infrastructure, as defined by Section 113.001 of the Texas Business and Commerce Code, in this state, other than access specifically allowed for product warranty and support purposes to any subcontractor unless (i) neither the subcontractor nor its parent company, nor any affiliate of the subcontractor or its parent company, is majority owned or controlled by citizens or governmental entities of a designated country; and (ii) neither the subcontractor nor its parent company, nor any affiliate of the subcontractor or its parent company, is headquartered in a designated country. Contractor will notify the System Agency before entering into any subcontract that will provide direct or remote access to or control of critical infrastructure, as defined by Section 113.001 of the Texas Business & Commerce Code, in this state.