Changing Locks, Keys and Adding Security Devices Sample Clauses

Changing Locks, Keys and Adding Security Devices. The Lessee shall not install additional or different locks, bars or gates on any door, window or other entry devices including security devices ("Security Devices") without the prior written consent of the Authority and without providing management with keys or entry codes for the approved replacement locks or Security Devices within 24 hours of the date the items are installed.
AutoNDA by SimpleDocs

Related to Changing Locks, Keys and Adding Security Devices

  • Title, Management and Disposition of Any REO Mortgage Loan The Master Servicer shall enforce the obligations of the applicable Servicer to administer each REO Mortgage Loan at all times so that each REO Mortgage Loan qualifies as "foreclosure property" under the REMIC Provisions and that it does not earn any "net income from foreclosure property" which is subject to tax under the REMIC Provisions. In the event that a Servicer is unable to dispose of any REO Mortgage Loan within the period mandated by each of the Servicing Agreements, the Master Servicer shall monitor such Servicer to verify that such REO Mortgage Loan is auctioned to the highest bidder within the period so specified. In the event of any such sale of a REO Mortgage Loan, the Custodian shall, at the written request of the Master Servicer and upon being supported with appropriate forms therefor, within five Business Days of the deposit by the Master Servicer of the proceeds of such sale or auction into the Certificate Account, release or cause to be released to the entity identified by the Master Servicer the related Owner Mortgage Loan File, Retained Mortgage Loan File, if applicable, and Servicer Mortgage Loan File and shall execute and deliver such instruments of transfer or assignment, in each case without recourse, as shall be necessary to vest in the auction purchaser title to the REO Mortgage Loan and the Custodian shall have no further responsibility with regard to such Owner Mortgage Loan File, Retained Mortgage Loan File, if applicable, or Servicer Mortgage Loan File. Neither the Trustee, the Master Servicer nor any Servicer, acting on behalf of the Trust Estate, shall provide financing from the Trust Estate to any purchaser of an REO Mortgage Loan.

  • ALTERATIONS AND ADDITIONS Tenant shall not make, or suffer to be made, any alteration or addition to the Premises, or any part thereof, without the written consent of Landlord first had and obtained by Tenant, but at the cost of Tenant, and any addition to, or alteration of, the Premises, except moveable furniture and trade fixtures, shall at once become a part of the Premises and belong to Landlord. If Landlord consents to the making of any alteration, addition, or improvement to or of the Premises by Tenant, the same shall be made by Landlord at Tenant’s sole cost and expense. Any modifications to the building or building systems required by governmental code or otherwise as a result of Tenant’s alterations, additions or improvements shall be made at Tenant’s sole cost and expense. Tenant shall retain title to all moveable furniture and trade fixtures placed in the Premises. All heating, lighting, electrical, air conditioning, partitioning, drapery, carpeting and floor installations made by Tenant, together with all property that has become an integral part of the Premises, shall not be deemed trade fixtures. Tenant agrees that it will not proceed to make any alterations or additions, without having obtained consent from Landlord to do so, and until five (5) days from the receipt of such consent, in order that Landlord may post appropriate notices to avoid any liability to contractors or material suppliers for payment for Tenant’s improvements. Tenant will at all times permit such notices to be posted and to remain posted until the completion of work. Tenant shall, if required by Landlord, secure at Tenant’s own cost and expense, a completion and lien indemnity bond, satisfactory to Landlord, for such work. Tenant further covenants and agrees that any mechanic’s lien filed against the Premises or against the Complex for work claimed to have been done for, or materials claimed to have been furnished to Tenant, will be discharged by Tenant, by bond or otherwise, within ten (10) days after the filing thereof, at the cost and expense of Tenant. Any exceptions to the foregoing must be made in writing and executed by both Landlord and Tenant. Pursuant to California Civil Code Section 1938, Landlord hereby notifies Tenant that as of the Effective Date, the Premises and Building have not undergone inspection by a “Certified Access Specialist” to determine whether the Premises meets all applicable construction related accessibility standards under California Civil Code Section 55.53

  • Covenants and Additional Agreements 5.1. ACCESS; CONFIDENTIALITY.

  • PERMITTED USES AND DISCLOSURES BY CONTRACTOR Except as otherwise limited in this Schedule, Contractor may use or disclose Protected Health Information to perform functions, activities, or services for, or on behalf of, County as specified in the Agreement; provided that such use or disclosure would not violate the Privacy Rule if done by County.

  • Each SUBI Separate; Assignees of SUBI Each party hereto acknowledges and agrees (and each holder or pledgee of the Transaction SUBI Certificate, by virtue of its acceptance of such Transaction SUBI Certificate or pledge thereof, acknowledges and agrees) that (a) the Transaction SUBI is a separate series of the Origination Trust as provided in Section 3806(b)(2) of Chapter 38 of Title 12 of the Delaware Code, 12 Del. Code § 3801 et seq., (b)(i) the debts, liabilities, obligations and expenses incurred, contracted for or otherwise existing with respect to the Transaction SUBI or the Transaction SUBI Portfolio shall be enforceable against the Transaction SUBI Portfolio only and not against any Other SUBI Assets or the UTI Portfolio and (ii) the debts, liabilities, obligations and expenses incurred, contracted for or otherwise existing with respect to any Other SUBI, any Other SUBI Portfolio, the UTI or the UTI Portfolio shall be enforceable against such Other SUBI Portfolio or the UTI Portfolio only, as applicable, and not against the Transaction SUBI or the Transaction SUBI Portfolio, (c) except to the extent required by law, UTI Assets or SUBI Assets with respect to any Other SUBI shall not be subject to the claims, debts, liabilities, expenses or obligations arising from or with respect to the Transaction SUBI in respect of such claim, (d)(i) no creditor or holder of a claim relating to the Transaction SUBI or the Transaction SUBI Portfolio shall be entitled to maintain any action against or recover any assets allocated to the UTI or the UTI Portfolio or any Other SUBI or the assets allocated thereto, and (ii) no creditor or holder of a claim relating to the UTI, the UTI Portfolio or any Other SUBI or any SUBI Assets other than the Transaction SUBI Portfolio shall be entitled to maintain any action against or recover any assets allocated to the Transaction SUBI, and (e) any purchaser, assignee or pledgee of an interest in the Transaction SUBI or the Transaction SUBI Certificate must, prior to or contemporaneously with the grant of any such assignment, pledge or security interest, (i) give to the Origination Trust a non-petition covenant substantially similar to that set forth in Section 6.9 of the Origination Trust Agreement, and (ii) execute an agreement for the benefit of each holder, assignee or pledgee from time to time of the UTI or UTI Certificate and any Other SUBI or Other SUBI Certificate, to release all claims to the assets of the Origination Trust allocated to the UTI Portfolio and each Other SUBI Portfolio and in the event that such release is not given effect, to fully subordinate all claims it may be deemed to have against the assets of the Origination Trust allocated to the UTI Portfolio and each Other SUBI Portfolio.

  • Application to Master Agreement For the avoidance of doubt, Clause 21.5 does not apply in respect of sums due from the Borrower to the Swap Bank under or in connection with the Master Agreement as to which sums the provisions of section 8 (Contractual Currency) of the Master Agreement shall apply.

  • Alterations, Modifications and Additions Company will, or will cause a Permitted Lessee to, make (or cause to be made) such alterations and modifications in and additions to the Airframe and the Engines as are required from time to time to meet the applicable requirements of the FAA or any applicable government of any other jurisdiction in which the Aircraft is then registered; except for (i) immaterial and non-recurring violations with respect to which corrective measures are being taken promptly by Company (or, if a Lease is then in effect, any Permitted Lessee) upon discovery thereof and (ii) any law, rule, regulation or order the validity or application of which is being contested in good faith by Company (or, if a Lease is then in effect, any Permitted Lessee) in any manner which does not involve any material risk of sale, loss or forfeiture of the Aircraft and does not materially adversely affect Loan Trustee’s interest in the Aircraft. In addition, Company (or any Permitted Lessee), at its own expense, may from time to time add further parts or accessories and make or cause to be made such alterations and modifications in and additions to the Airframe or any Engine as Company (or any Permitted Lessee) deems desirable in the proper conduct of its business, including, without limitation, removal (without replacement) of Parts; provided that no such alteration, modification or addition shall materially diminish the value or utility of the Airframe or such Engine below its value or utility immediately prior to such alteration, modification or addition, assuming that the Airframe or such Engine was then in the condition required to be maintained by the terms of this Indenture, except that the value (but not the utility) of the Airframe or any Engine may be reduced by the value of any such Parts that are removed that Company (or such Permitted Lessee) deems obsolete or no longer suitable or appropriate for use on the Airframe or any Engine. For the avoidance of doubt, Company may make alterations in the passenger configuration of the Aircraft and such alterations shall not be subject to the immediately preceding sentence. All Parts incorporated or installed in or attached or added to the Airframe or any Engine as the result of such alteration, modification or addition shall, without further act, be subject to the Lien of this Indenture. Notwithstanding the foregoing, Company (or any Permitted Lessee) may, at any time, remove any Part from the Airframe or any Engine if such Part: (i) is in addition to, and not in replacement of or substitution for, any Part originally incorporated or installed in or attached to the Airframe or such Engine at the time of delivery thereof to Company or any Part in replacement of, or substitution for, any such Part, (ii) is not required to be incorporated or installed in or attached or added to the Airframe or such Engine pursuant to the first sentence of this Section 7.04(c) and (iii) can be removed from the Airframe or such Engine without materially diminishing the value or utility required to be maintained by the terms of this Indenture that the Airframe or such Engine would have had had such Part never been installed on the Airframe or such Engine. Upon the removal by Company (or any Permitted Lessee) of any Part as permitted by this Section 7.04(c), such removed Part shall, without further act, be free and clear of all rights and interests of Loan Trustee and the Lien of this Indenture and shall no longer be deemed a Part hereunder. Upon request of Company from time to time, Loan Trustee shall execute and deliver to Company instruments reasonably requested by Company confirming the release of any such removed Part from the Lien of this Indenture. Loan Trustee acknowledges that it has no interest in the Excluded Equipment. Notwithstanding the provisions of this Section 7.04(c) or any other term or condition of this Indenture, Company (or any Permitted Lessee) may from time to time install on, and remove from, the Aircraft equipment that is owned by, leased to or conditionally sold to Company (or any Permitted Lessee) (and title to such equipment shall remain vested in Company, such Permitted Lessee, or the lessor or the conditional vendor thereof) if (1) such equipment is Excluded Equipment and (2) the location affected by any such removal, if damaged, is repaired prior to return, in a workmanlike manner, to a condition suitable for commercial passenger service; provided that all costs of installation, removal and replacement shall be the responsibility of Company.

  • Selection of Subcontractors, Procurement of Materials and Leasing of Equipment The contractor shall not discriminate on the grounds of race, color, religion, sex, national origin, age or disability in the selection and retention of subcontractors, including procurement of materials and leases of equipment. The contractor shall take all necessary and reasonable steps to ensure nondiscrimination in the administration of this contract. a. The contractor shall notify all potential subcontractors and suppliers and lessors of their EEO obligations under this contract. b. The contractor will use good faith efforts to ensure subcontractor compliance with their EEO obligations.

  • Description of Goods or Services and Additional Terms and Conditions The Contractor shall perform as set forth in Exhibit A. For purposes of this Contract, to perform and the performance in Exhibit A is referred to as “Perform” and the “Performance.”

  • Testing of Metering Equipment Connecting Transmission Owner shall inspect and test all of its Metering Equipment upon installation and at least once every two (2) years thereafter. If requested to do so by NYISO or Developer, Connecting Transmission Owner shall, at Developer’s expense, inspect or test Metering Equipment more frequently than every two (2) years. Connecting Transmission Owner shall give reasonable notice of the time when any inspection or test shall take place, and Developer and NYISO may have representatives present at the test or inspection. If at any time Metering Equipment is found to be inaccurate or defective, it shall be adjusted, repaired or replaced at Developer’s expense, in order to provide accurate metering, unless the inaccuracy or defect is due to Connecting Transmission Owner’s failure to maintain, then Connecting Transmission Owner shall pay. If Metering Equipment fails to register, or if the measurement made by Metering Equipment during a test varies by more than two percent from the measurement made by the standard meter used in the test, Connecting Transmission Owner shall adjust the measurements by correcting all measurements for the period during which Metering Equipment was in error by using Developer’s check meters, if installed. If no such check meters are installed or if the period cannot be reasonably ascertained, the adjustment shall be for the period immediately preceding the test of the Metering Equipment equal to one-half the time from the date of the last previous test of the Metering Equipment. The NYISO shall reserve the right to review all associated metering equipment installation on the Developer’s or Connecting Transmission Owner’s property at any time.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!