Common use of Completion of Plans and Specifications Clause in Contracts

Completion of Plans and Specifications. All Plans and -------------------------------------- Specifications shall be prepared in strict compliance with applicable Building standards and requirements, this Work Letter and otherwise, and shall also adhere to the design drawings approved by Landlord. In order to assure the compatibility of Tenant's electrical and mechanical systems and the compatibility of Tenant's structural requirements with the existing Building and in order to expedite the preparation of Tenant's electrical, mechanical and structural drawings, Tenant or Tenant's Architect shall deliver to Landlord's Architect, not later than thirty (30) Working Days from the date of Landlord's approval of design drawings, a detailed plan setting forth any and all electrical, mechanical and structural requirements, and Landlord's Architect shall retain, at Tenant's expense, Landlord's electrical, mechanical and structural engineers to prepare all necessary electrical, mechanical and structural construction drawings which shall be included as a part of the Plans and Specifications. All construction documents and calculations prepared by Tenant's Architect shall be submitted by Tenant, in the form of four (4) sets of blueline prints, to Landlord for approval within ten (10) Working Days after the date of receipt by Tenant of Landlord's approval of design drawings. If the Plans and Specifications are returned to Tenant with comments, but not bearing approval of Landlord, the Plans and Specifications shall be immediately revised by Tenant and resubmitted to Landlord for approval within fifteen (15) Working Days of their receipt by Tenant. (i) The fees for Tenant's Architect and any consultants or engineers retained by or on behalf of Tenant or Tenant's Architect (including, but not limited to, the electrical, mechanical and structural engineers required to be retained under this paragraph) shall be paid by Tenant. Tenant shall also pay for any preliminary drawings by Landlord's Architect for review of the design drawings, the Plans and Specifications, and any revisions to such documents, and the fees and expenses of Landlord's Architect for inspection of the Work, as required by Landlord. Tenant may use funds from the Allowance to make such payments. (ii) Tenant shall have the sole responsibility for compliance of the Plans and Specifications with all applicable statutes, codes, ordinances and other regulations, and the approval of the Plans and Specifications or calculations included therein by Landlord shall not constitute an indication, representation or certification by Landlord that such Plans and Specifications or calculations are in compliance with said statutes, codes, ordinances and other regulations. In instances where several sets of requirements must be met, the requirements of Landlord's insurance underwriter or the strictest applicable requirements shall apply where not prohibited by applicable codes.

Appears in 3 contracts

Samples: Lease Agreement (Equinix Inc), Lease Agreement (Equinix Inc), Lease Agreement (Equinix Inc)

AutoNDA by SimpleDocs

Completion of Plans and Specifications. All Plans and -------------------------------------- Specifications shall be prepared in strict compliance with applicable Building standards and requirements, this Work Letter and otherwise, and shall also adhere to the design drawings approved by Landlord. In order to assure the compatibility of Tenant's electrical and mechanical systems and the compatibility of Tenant's structural requirements with the existing Building and in order to expedite the preparation of Tenant's electrical, mechanical and structural drawings, Tenant or Tenant's Architect shall deliver to Landlord's Architect, not later than thirty (30) Working Days from the date of Landlord's approval of design drawings, a detailed plan setting forth any and all electrical, mechanical and structural requirements, and Landlord's Architect shall retain, at Tenant's expense, Landlord's electrical, mechanical and structural engineers to prepare all necessary electrical, mechanical and structural construction drawings which shall be included as a part of the Plans and Specifications. All construction documents and calculations prepared by Tenant's Architect shall be submitted by Tenant, in the form of four (4) sets of blueline prints, to Landlord for approval within ten (10) Working Days after the date of receipt by Tenant of Landlord's approval of design drawings, electrical, mechanical and structural drawings. If the Plans and Specifications are returned to Tenant with comments, but not bearing approval of Landlord, the Plans and Specifications shall be immediately revised by Tenant and resubmitted to Landlord for approval within fifteen (15) Working Days of their receipt by Tenant. (i) The fees for Tenant's Architect and any consultants or engineers retained by or on behalf of Tenant or Tenant's Architect (including, but not limited to, the electrical, mechanical and structural engineers required to be retained under this paragraph) shall be paid by Tenant. Tenant shall also pay for any preliminary drawings by Landlord's Architect for review of the design drawings, the Plans and Specifications, and any revisions to such documents, and the fees and expenses of Landlord's Architect for inspection of the Work, as required by Landlord. Tenant may use funds from the Allowance to make such payments. (ii) Tenant shall have the sole responsibility for compliance of the Plans and Specifications with all applicable statutes, codes, ordinances and other regulations, and the approval of the Plans and Specifications or calculations included therein by Landlord shall not constitute an indication, representation or certification by Landlord that such Plans and Specifications or calculations are in compliance with said statutes, codes, ordinances and other regulations. In instances where several sets of requirements must be met, the requirements of Landlord's insurance underwriter or the strictest applicable requirements shall apply where not prohibited by applicable codes.

Appears in 1 contract

Samples: Lease Agreement (Focal Communications Corp)

Completion of Plans and Specifications. All Plans and -------------------------------------- Specifications shall be prepared in strict compliance with all applicable statutes, codes, ordinances and other regulations, applicable Building standards and requirementsrequirements as set forth in the Lease, this Work Letter and otherwise, and shall also adhere to the design drawings approved by Landlord. In order to assure the compatibility of Tenant's electrical and mechanical systems and the compatibility of Tenant's structural requirements with the existing Building and in order to expedite the preparation of Tenant's electrical, mechanical and structural drawings, Tenant or Tenant's Architect shall deliver to Landlord's Architect, not later than thirty (30) Working Days from the date of Landlord's approval of design drawings, a detailed plan setting forth any and all electrical, mechanical and structural requirements, and Landlord's Architect shall retain, at Tenant's expense, Landlord's electrical, mechanical and structural engineers to prepare all necessary electrical, mechanical and structural construction drawings which shall be included as a part of the Plans and Specifications. All construction documents and calculations prepared by Tenant's Architect shall be submitted by Tenant, in the form of four (4) sets of blueline prints, to Landlord for approval within ten (10) Working Days after the date of receipt by Tenant of Landlord's approval of design drawings. If the Plans and Specifications are returned to Tenant with comments, but not bearing approval of Landlord, the Plans and Specifications shall be immediately revised by Tenant and resubmitted to Landlord for approval within fifteen (15) Working Days of their receipt by Tenant. (i) The fees for If Landlord constructs Tenant's Architect and ’s Improvements based on any consultants special requirements or engineers retained improvements required by Tenant, or on behalf of upon information furnished by Tenant or Tenant's Architect (including, but not limited to, the electrical, mechanical and structural engineers required that later proves to be retained under this paragraph) inaccurate or incomplete resulting in any violation of any applicable statute, code, ordinance and other regulation, Tenant shall be paid by Tenant. Tenant shall also pay for any preliminary drawings by Landlord's Architect for review of solely liable to correct such violations and to bring the design drawings, the Plans and Specifications, and any revisions to improvements into compliance with such documents, and the fees and expenses of Landlord's Architect for inspection of the Work, as required by Landlord. Tenant may use funds from the Allowance to make such payments. (ii) Tenant shall have the sole responsibility for compliance of the Plans and Specifications with all applicable statutes, codes, ordinances and other regulations, and the regulations as promptly as is practicable. No approval by Landlord of the Plans and Specifications or calculations included therein any revisions to them will constitute a representation or warranty by Landlord as to the adequacy or sufficiency of such plans, or the improvements to which they relate, for any use, purpose or condition, but such approval will merely be the consent of Landlord to the construction or installation of improvements in the Premises according to such plans. (ii) Upon completion of the Initial Improvements, if so required by Landlord, Tenant shall not constitute deliver to Landlord an indication, representation or certification by Landlord that such “as-built” set of Plans and Specifications or calculations are in compliance for the Premises, together with said statutes, codes, ordinances such other information required by Landlord to place the information from the “as-built” Plans and Specifications on to Landlord’s data base; the cost of providing the “as-built” Plans and Specifications and other regulations. In instances where several sets of requirements must information, together with Landlord’s cost to place the information on to Landlord’s data base, shall be met, the requirements of Landlord's insurance underwriter or the strictest applicable requirements shall apply where not prohibited borne solely by applicable codesTenant.

Appears in 1 contract

Samples: Office Lease Agreement (Prescient Applied Intelligence, Inc.)

Completion of Plans and Specifications. All Plans and -------------------------------------- Specifications shall be prepared in strict compliance with applicable Building standards and requirementsrequirements as set forth in the Lease, this Work Letter and otherwise, and shall also adhere to the design drawings approved by Landlord. In order to assure the compatibility of Tenant's electrical and mechanical systems and the compatibility of Tenant's structural requirements with the existing Building and in order to expedite the preparation of Tenant's electrical, mechanical and structural drawings, Tenant or Tenant's Architect shall deliver to Landlord's Architect, not later than thirty ten (3010) Working Days from the date of Landlord's approval of design drawings, a detailed plan setting forth any and all electrical, mechanical and structural requirements, and Landlord's Architect shall retain, at Tenant's expense, Landlord's electrical, mechanical and structural engineers to prepare all necessary electrical, mechanical and structural construction drawings which shall be included as a part of the Plans and Specifications. All construction documents and calculations prepared by Tenant's Architect shall be submitted by Tenant, in the form of four (4) sets of blueline prints, to Landlord for approval within ten (10) Working Days after the date of receipt by Tenant of Landlord's approval of design drawings. If the Plans and Specifications are returned to Tenant with comments, but not bearing approval of Landlord, the Plans and Specifications shall be immediately revised by Tenant and resubmitted to Landlord for approval within fifteen ten (1510) Working Days of their receipt by Tenant. (i) The fees for Tenant's Architect and any consultants or engineers retained by or on behalf of Tenant or Tenant's Architect (including, but not limited to, the electrical, mechanical and structural engineers required to be retained under this paragraph) shall be paid by Tenant. Tenant shall also pay for any preliminary drawings by Landlord's Architect for review of the design drawings, the Plans and Specifications, and any revisions to such documents, and the fees and expenses of Landlord's Architect for inspection of the Work, as reasonably required by Landlord. Tenant may use funds from the Allowance to make such payments. (ii) Tenant shall have the sole responsibility for compliance of the Plans and Specifications with all applicable statutes, codes, ordinances and other regulations, and the approval of the Plans and Specifications or calculations included therein by Landlord shall not constitute an indication, representation or certification by Landlord that such Plans and Specifications or calculations are in compliance with said statutes, codes, ordinances and other regulations. In instances where several sets of requirements must be met, the requirements of Landlord's insurance underwriter or the strictest applicable requirements shall apply where not prohibited by applicable codes. (iii) Upon completion of the Initial Improvements, if so required by Landlord, Tenant shall deliver to Landlord an "as-built" set of Plans and Specifications for the Premises, together with such other information required by Landlord to place the information from the "as-built" Plans and Specifications on to Landlord's data base; the cost of providing the "as-built" Plans and Specifications and other information, together with Landlord's cost to place the information on to Landlord's data base, shall be borne solely by Tenant.

Appears in 1 contract

Samples: Office Lease (Canaan Energy Corp)

Completion of Plans and Specifications. All Plans and -------------------------------------- Specifications shall be prepared in strict compliance with applicable Building standards and requirementsrequirements as set forth in the Lease, this Work Letter Workletter and otherwise, and shall also adhere to the design drawings approved by Landlord. In order to assure the compatibility of Tenant's ’s electrical and mechanical systems and the compatibility of Tenant's ’s structural requirements with the existing Building and in order to expedite the preparation of Tenant's ’s electrical, mechanical and structural drawings, Tenant or Tenant's ’s Architect shall deliver to Landlord's ’s Architect, not later than thirty ten (3010) Working Days from the date of Landlord's ’s approval of design drawings, a detailed plan setting forth any and all electrical, mechanical and structural requirements, and Landlord's ’s Architect shall retain, at Tenant's ’s expense, Landlord's ’s electrical, mechanical and structural engineers to prepare all necessary electrical, mechanical and structural construction drawings which shall be included as a part of the Plans and Specifications. All construction documents and calculations prepared by Tenant's ’s Architect shall be submitted by Tenant, in the form of four (4) sets of blueline prints, to Landlord for approval within ten (10) Working Days after the date of receipt by Tenant of Landlord's ’s approval of design drawings. If the Plans and Specifications are returned to Tenant with comments, but not bearing approval of Landlord, the Plans and Specifications shall be immediately revised by Tenant and resubmitted to Landlord for approval within fifteen ten (1510) Working Days of their receipt by Tenant. (i) The fees for Tenant's ’s Architect and any consultants or engineers retained by or on behalf of Tenant or Tenant's ’s Architect (including, but not limited to, the electrical, mechanical and structural engineers required to be retained under this paragraph) shall be paid by Tenant. Tenant shall also pay for any preliminary drawings by Landlord's ’s Architect for review of the design drawings, the Plans and Specifications, and any revisions to such documents, and the fees and expenses of Landlord's ’s Architect for inspection of the Work, as required by Landlord. Tenant may use funds from the Allowance to make such payments. (ii) Tenant shall have the sole responsibility for compliance of the Plans and Specifications with all applicable statutes, codes, ordinances and other regulations, and the approval of the Plans and Specifications or calculations included therein by Landlord shall not constitute an indication, representation or certification by Landlord that such Plans and Specifications or calculations are in compliance with said statutes, codes, ordinances and other regulations. In instances where several sets of requirements must be met, the requirements of Landlord's ’s insurance underwriter or the strictest applicable requirements shall apply where not prohibited by applicable codes. (iii) Upon completion of the Initial Improvements, if so required by Landlord, Tenant shall deliver to Landlord an “as-built” set of Plans and Specifications for the Premises, together with such other information required by Landlord to place the information from the “as-built” Plans and Specifications on to Landlord’s data base; the cost of providing the “as-built” Plans and Specifications and other information, together with Landlord’s cost to place the information on to Landlord’s data base, shall be borne solely by Tenant.

Appears in 1 contract

Samples: Office Lease Agreement (E2open Inc)

Completion of Plans and Specifications. All Plans and -------------------------------------- Specifications shall be prepared in strict compliance with applicable Building standards and requirementsrequirements as set forth in the Lease, this Work Letter Workletter and otherwise, and shall also adhere to the design drawings approved by Landlord. In order to assure the compatibility of Tenant's electrical and mechanical systems and the compatibility of Tenant's structural requirements with the existing Building and in order to expedite the preparation of Tenant's electrical, mechanical and structural drawings, Tenant or Tenant's Architect shall deliver to Landlord's Architect, not later than thirty ten (3010) Working Days from the date of Landlord's approval of design drawings, a detailed plan setting forth any and all electrical, mechanical and structural requirements, and Landlord's Architect shall retain, at Tenant's expense, Landlord's electrical, mechanical and structural engineers to prepare all necessary electrical, mechanical and structural construction drawings which shall be included as a part of the Plans and Specifications. All construction documents and calculations prepared by Tenant's Architect shall be submitted by Tenant, in the form of four (4) sets of blueline prints, to Landlord for approval within ten (10) Working Days after the date of receipt by Tenant of Landlord's approval of design drawings. If the Plans and Specifications are returned to Tenant with comments, but not bearing approval of Landlord, the Plans and Specifications shall be immediately revised by Tenant and resubmitted to Landlord for approval within fifteen ten (1510) Working Days of their receipt by Tenant. (i) The fees for Tenant's Architect and any consultants or engineers retained by or on behalf of Tenant or Tenant's Architect (including, but not limited to, the electrical, mechanical and structural engineers required to be retained under this paragraph) shall be paid by Tenant. Tenant shall also pay for any preliminary drawings by Landlord's Architect for review of the design drawings, the Plans and Specifications, and any revisions to such documents, and the fees and expenses of Landlord's Architect for inspection of the Work, as required by Landlord. Tenant may use funds from the Allowance to make such payments. (ii) Tenant shall have the sole responsibility for compliance of the Plans and Specifications with all applicable statutes, codes, ordinances and other regulations, and the approval of the Plans and Specifications or calculations included therein by Landlord shall not constitute an indication, representation or certification by Landlord that such Plans and Specifications or calculations are in compliance with said statutes, codes, ordinances and other regulations. In instances where several sets of requirements must be met, the requirements of Landlord's insurance underwriter or the strictest applicable requirements shall apply where not prohibited by applicable codes. (iii) Upon completion of the Initial Improvements, if so required by Landlord, Tenant shall deliver to Landlord an "as-built" set of Plans and Specifications for the Premises, together with such other information required by Landlord to place the information from the "as-built" Plans and Specifications on to Landlord's data base; the cost of providing the "as-built" Plans and Specifications and other information, together with Landlord's cost to place the information on to Landlord's date base, shall be born solely by Tenant.

Appears in 1 contract

Samples: Office Lease Agreement (Benz Energy LTD /Can/)

Completion of Plans and Specifications. All Plans and -------------------------------------- Specifications shall be prepared in strict compliance with applicable Building standards and requirementsrequirements as set forth in the Lease, this Work Letter and otherwise, and shall also adhere to the design drawings approved by Landlord. In order to assure the compatibility of Tenant's electrical and mechanical systems and the compatibility of Tenant's structural requirements with the existing Building and in order to expedite the preparation of Tenant's electrical, mechanical and structural drawings, drawings Tenant or Tenant's Architect shall deliver to Landlord's Architect, not later than thirty ten (3010) Working Days from the date of Landlord's approval of design drawings, a detailed plan setting forth any and all electrical, mechanical and structural requirements, and LandlordTenant's Architect shall retain, at Tenant's expense, LandlordTenant's electrical, mechanical and structural engineers to prepare all necessary electrical, mechanical and structural construction drawings which shall be included as a part of the Plans and Specifications. All construction documents and calculations prepared by Tenant's Architect shall be submitted by Tenant, in the form of four (4) sets of blueline prints, to Landlord for approval within ten (10) Working Days after the date of receipt by Tenant of Landlord's approval of design drawings. If the Plans and Specifications are returned to Tenant with comments, but not bearing approval of Landlord, the Plans and Specifications shall be immediately revised by Tenant and resubmitted to Landlord for approval within fifteen ten (15) Working 10)Working Days of their receipt by Tenant. If Tenant fails to resubmit the revised Plans and Specifications to Landlord within ten (10) Working Days, Tenant will be deemed to have accepted and approved all of Landlord's comments to the Plans and Specifications. (i) The fees for Tenant's Architect and any consultants or engineers retained by or on behalf of Tenant or Tenant's Architect (including, but not limited to, the electrical, mechanical and structural engineers required to be retained under this paragraph) shall be paid by Tenant. Tenant shall also pay for any preliminary drawings by Landlord's Architect for review of the design drawings, the Plans and Specifications, and any revisions to such documents, and the fees and expenses of Landlord's Architect for inspection of the Work, as required by Landlord. Tenant may use funds from the Allowance to make such payments. (ii) Tenant shall have the sole responsibility for compliance of the Plans and Specifications with all applicable statutes, codes, ordinances and other regulations, including the Americans with Disabilities Act, and the approval of the Plans and Specifications or calculations included therein by Landlord shall not constitute an indication, representation or certification by Landlord that such Plans and Specifications or calculations are in compliance with said statutes, codes, ordinances and other regulations. In instances where several sets of requirements must be met, the requirements of Landlord's insurance underwriter or the strictest applicable requirements shall apply where not prohibited by applicable codes. (iii) Upon completion of the Initial Improvements, if so required by Landlord, Tenant shall deliver to Landlord, at Tenant's expense, an "as-built" set of Plans and Specifications for the Premises in AutoCad or comparable format, together with such other information required by Landlord to place the information from the "as-built" Plans and Specifications on to Landlord's data base.

Appears in 1 contract

Samples: Office Lease (Genesis Energy Lp)

AutoNDA by SimpleDocs

Completion of Plans and Specifications. All Plans and -------------------------------------- Specifications shall be prepared in strict compliance with applicable Building standards and requirementsrequirements as set forth in the Lease, this Work Letter and otherwise, and shall also adhere to the design drawings approved by Landlord. In order to assure the compatibility of Tenant's ’s electrical and mechanical systems and the compatibility of Tenant's ’s structural requirements with the existing Building and in order to expedite the preparation of Tenant's ’s electrical, mechanical and structural drawings, drawings Tenant or Tenant's ’s Architect shall deliver to Landlord's ’s Architect, not later than thirty ten (3010) Working Days from the date of Landlord's ’s approval of design drawings, a detailed plan setting forth any and all electrical, mechanical and structural requirements, and Landlord's ’s Architect shall retain, at Tenant's ’s expense, Landlord's ’s electrical, mechanical and structural engineers to prepare all necessary electrical, mechanical and structural construction drawings which shall be included as a part of the Plans and Specifications. All construction documents and calculations prepared by Tenant's ’s Architect shall be submitted by Tenant, in the form of four (4) sets of blueline prints, to Landlord for approval within ten (10) Working Days after the date of receipt by Tenant of Landlord's ’s approval of design drawings. If the Plans and Specifications are returned to Tenant with comments, but not bearing approval of Landlord, the Plans and Specifications shall be immediately revised by Tenant and resubmitted to Landlord for approval within fifteen ten (1510) Working Days of their receipt by Tenant. (i) The fees for Tenant's ’s Architect and any consultants or engineers retained by or on behalf of Tenant or Tenant's ’s Architect (including, but not limited to, the electrical, mechanical and structural engineers required to be retained under this paragraph) shall be paid by Tenant. Tenant shall also pay for any preliminary drawings by Landlord's ’s Architect for review of the design drawings, the Plans and Specifications, and any revisions to such documents, and the fees and expenses of Landlord's ’s Architect for inspection of the Work, as required by Landlord. Tenant may use funds from the Allowance to make such payments. (ii) Tenant shall have the sole responsibility for compliance of the Plans and Specifications with all applicable statutes, codes, ordinances and other regulations, and the approval of the Plans and Specifications or calculations included therein by Landlord shall not constitute an indication, representation or certification by Landlord that such Plans and Specifications or calculations are in compliance with said statutes, codes, ordinances and other regulations. In instances where several sets of requirements must be met, the requirements of Landlord's ’s insurance underwriter or the strictest applicable requirements shall apply where not prohibited by applicable codes. (iii) Upon completion of the Initial Improvements, if so required by Landlord, Tenant shall deliver to Landlord an “as-built” set of Plans and Specifications for the Premises, together with such other information required by Landlord to place the information from the “as-built” Plans and Specifications on to Landlord’s data base; the cost of providing the “as-built” Plans and Specifications and other information, together with Landlord’s cost to place the information on to Landlord’s data base, shall be borne solely by Tenant.

Appears in 1 contract

Samples: Office Lease (Quest Resource Corp)

Completion of Plans and Specifications. All Plans and -------------------------------------- Specifications shall be prepared in strict compliance with applicable Building standards and requirementsrequirements as set forth in the Lease, this Work Letter and otherwise, and shall also adhere to the design drawings approved by Landlord. In order to assure the compatibility of Tenant's electrical and mechanical systems and the compatibility of Tenant's structural requirements with the existing Building and in order to expedite the preparation of Tenant's electrical, mechanical mechanical, and structural drawings, Tenant or Tenant's Architect shall deliver to Landlord's Architect, not later than thirty ten (3010) Working Days from the date of Landlord's approval of design drawings, a detailed plan setting forth any and all electrical, mechanical mechanical, and structural requirements, and Landlord's Architect shall retain, at Tenant's expense, Landlord's electrical, mechanical mechanical, and structural engineers to prepare all necessary electrical, mechanical mechanical, and structural construction drawings which shall be included as a part of the Plans and Specifications. All construction documents and calculations prepared by Tenant's Architect shall be submitted by Tenant, in the form of four (4) sets of blueline prints, to Landlord for approval within ten (10) Working Days after the date of receipt by Tenant of Landlord's approval of design drawings. If the Plans and Specifications are returned to Tenant with comments, but not bearing approval of Landlord, the Plans and Specifications shall be immediately revised by Tenant and resubmitted to Landlord for approval within fifteen ten (1510) Working Days of their receipt by Tenant. (i) The fees for Tenant's Architect and any consultants or engineers retained by or on behalf of Tenant or Tenant's Architect (including, but not limited to, the electrical, mechanical and structural engineers required to be retained under this paragraph) shall be paid by Tenant. Tenant shall also pay for any preliminary drawings by Landlord's Architect for review of the design drawings, the Plans and Specifications, and any revisions to such documents, and the fees and expenses of Landlord's Architect for inspection of the Work, as required by Landlord. Tenant may use funds from the Allowance to make such payments. (ii) Tenant shall have the sole responsibility for compliance of the Plans and Specifications with all applicable statutes, codes, ordinances ordinances, and other regulations, and the approval of the Plans and Specifications or calculations included therein by Landlord shall not constitute an indication, representation representation, or certification by Landlord that such Plans and Specifications or calculations are in compliance with said statutes, codes, ordinances ordinances, and other regulations. In instances where several sets of requirements must be met, the requirements of Landlord's insurance underwriter or the strictest applicable requirements shall apply where not prohibited by applicable codes. (iii) Upon completion of the Initial Improvements, if so required by Landlord, Tenant shall deliver to Landlord an "as-built" set of Plans and Specifications for the Expansion Space, together with such other information required by Landlord to place the information from the "as-built" Plans and Specifications on to Landlord's data base; the cost of providing the "as-built" Plans and Specifications and other information, together with Landlord's cost to place the information on to Landlord's data base, shall be borne solely by Tenant.

Appears in 1 contract

Samples: Office Lease (Canaan Energy Corp)

Completion of Plans and Specifications. All Plans and -------------------------------------- Specifications shall be prepared in strict compliance with applicable Building standards and requirementsrequirements as set forth in the Lease, this Work Letter and otherwise, and shall also adhere to the design drawings approved by Landlord. In order to assure the compatibility of Tenant's electrical and mechanical systems and the compatibility of Tenant's structural requirements with the existing Building and in order to expedite the preparation of Tenant's electrical, mechanical and structural drawings, drawings Tenant or Tenant's Architect shall deliver to Landlord's Architect, not later than thirty ten (3010) Working Days from the date of Landlord's approval of design drawings, a detailed plan setting forth any and all electrical, mechanical and structural requirements, and Landlord's Architect shall retain, at Tenant's expense, Landlord's electrical, mechanical and structural engineers to prepare all necessary electrical, mechanical and structural construction drawings which shall be included as a part of the Plans and Specifications. All construction documents and calculations prepared by Tenant's Architect shall be submitted by Tenant, in the form of four (4) sets of blueline prints, to Landlord for approval within ten (10) Working Days after the date of receipt by Tenant of Landlord's approval of design drawings. If the Plans and Specifications are returned to Tenant with comments, but not bearing approval of Landlord, the Plans and Specifications shall be immediately revised by Tenant and resubmitted to Landlord for approval within fifteen ten (1510) Working Days of their receipt by Tenant. (i) The fees for Tenant's Architect and any consultants or engineers retained by or on behalf of Tenant or Tenant's Architect (including, but not limited to, the electrical, mechanical and structural engineers required to be retained under this paragraph) shall be paid by Tenant. Tenant shall also pay for any preliminary drawings by Landlord's Architect for review of the design drawings, the Plans and Specifications, and any revisions to such documents, and the fees and expenses of Landlord's Architect for inspection of the Work, as required by Landlord. Tenant may use funds from the Allowance to make such payments. (ii) Tenant shall have the sole responsibility for compliance of the Plans and Specifications with all applicable statutes, codes, ordinances and other regulations, and the approval of the Plans and Specifications or calculations included therein by Landlord shall not constitute an indication, representation or certification by Landlord that such Plans and Specifications or calculations are in compliance with said statutes, codes, ordinances and other regulations. In instances where several sets of requirements must be met, the requirements of Landlord's insurance underwriter or the strictest applicable requirements shall apply where not prohibited by applicable codes. (iii) Upon completion of the Initial Improvements, if so required by Landlord, Tenant shall deliver to Landlord an "as-built" set of Plans and Specifications for the Premises, together with such other information required by Landlord to place the information from the "as-built" Plans and Specifications on to Landlord"s data base; the cost of providing the "as-built" Plans and Specifications and other information, together with Landlord's cost to place the information on to Landlord's data base, shall be borne solely by Tenant.

Appears in 1 contract

Samples: Office Lease (Gateway Energy Corp/Ne)

Completion of Plans and Specifications. All Plans and -------------------------------------- Specifications shall be prepared in strict compliance with applicable Building standards and requirementsrequirements as set forth in the Lease, this Work Letter Workletter and otherwise, and shall also adhere to the design drawings approved by Landlord. In order to assure the compatibility of Tenant's electrical and mechanical systems and the compatibility of Tenant's structural requirements with the existing Building and in order to expedite the preparation of Tenant's electrical, mechanical and structural drawings, Tenant or Tenant's Architect shall deliver to Landlord's Architect, not later than thirty (30) Working Days from the date of Landlord's approval of design drawings, a detailed plan setting forth any and all electrical, mechanical and structural requirements, and Landlord's Architect shall retain, at Tenant's expense, . Landlord's electrical, mechanical and structural engineers to prepare all necessary electrical, mechanical and structural construction drawings which shall be included as a part of the Plans and Specifications. All construction documents and calculations prepared by Tenant's Architect shall be submitted by Tenant, in the form of four (4) sets of blueline prints, to Landlord for approval within ten (10) Working Days after the date of receipt by Tenant of Landlord's approval of design drawings. If the Plans and Specifications are returned to Tenant with comments, but not bearing approval of Landlord, the Plans and Specifications shall be immediately revised by Tenant and resubmitted to Landlord for approval within fifteen ten (1510) Working Days of their receipt by Tenant. (i) The fees for Tenant's Architect and any consultants or engineers retained by or on behalf of Tenant or Tenant's Architect (including, but not limited to, the electrical, mechanical and structural engineers required to be retained under this paragraph) shall be paid by Tenant. Tenant shall also pay for any preliminary drawings by Landlord's Architect for review of the design drawings, the Plans and Specifications, and any revisions to such documents, and the fees and expenses of Landlord's Architect for inspection of the Work, as required by Landlord. Tenant may use funds from the Allowance to make such payments. (ii) Tenant shall have the sole responsibility for compliance of the Plans and Specifications with all applicable statutes, codes, ordinances and other regulations, and the approval of the Plans and Specifications or calculations included therein by Landlord shall not constitute an indication, representation or certification by Landlord that such Plans and Specifications or calculations are in compliance with said statutes, codes, ordinances and other regulations. In instances where several sets of requirements must be met, the requirements of Landlord's insurance underwriter or the strictest applicable requirements shall apply where not prohibited by applicable codes. (iii) Upon completion of the Initial Improvements, if so required by Landlord, Tenant shall deliver to Landlord an "as-built" set of Plans and Specifications for the Premises, together with such other information required by Landlord to place the information from the "as-built" Plans and Specifications on to Landlord's data base; the cost of providing the "as-built" Plans and Specifications and other information, together with Landlord's cost to place the information on to Landlord's data base, shall be borne solely by Tenant.

Appears in 1 contract

Samples: Office Lease Agreement (Benz Energy LTD /Can/)

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!