Common use of Conversion of Live Telephone Exchange Service to Analog 2W Loops Clause in Contracts

Conversion of Live Telephone Exchange Service to Analog 2W Loops. 3.3.1 The following coordination procedures shall apply to “live” cutovers of Verizon Customers who are converting their Telephone Exchange Services to ATI Telephone Exchange Services provisioned over Analog 2W unbundled Local Loops (“Analog 2W Loops) to be provided by Verizon to ATI: 3.3.1.1 Coordinated cutover charges shall apply to conversions of live Telephone Exchange Services to Analog 2W Loops. When an outside dispatch is required to perform a conversion, additional charges may apply. If ATI does not request a coordinated cutover, Verizon will process ATI’s order as a new installation subject to applicable standard provisioning intervals. 3.3.1.2 ATI shall request Analog 2W Loops for coordinated cutover from Verizon by delivering to Verizon a valid electronic Local Service Request (“LSR”). Xxxxxxx agrees to accept from ATI the date and time for the conversion designated on the LSR (“Scheduled Conversion Time”), provided that such designation is within the regularly scheduled operating hours of the Verizon Regional CLEC Control Center (“RCCC”) and subject to the availability of Verizon’s work force. In the event that Xxxxxxx’s work force is not available, ATI and Verizon shall mutually agree on a New Conversion Time, as defined below. ATI shall designate the Scheduled Conversion Time subject to Verizon standard provisioning intervals as stated in the Verizon CLEC Handbook, as may be revised from time to time. Within three (3) Business Days of Verizon's receipt of such valid LSR, or as otherwise required by Applicable Law, Verizon shall provide ATI the scheduled due date for conversion of the Analog 2W Loops covered by such LSR. 3.3.1.3 ATI shall provide dial tone at the ATI collocation site at least forty-eight (48) hours prior to the Scheduled Conversion Time. 3.3.1.4 Either Party may contact the other Party to negotiate a new Scheduled Conversion Time (the “New Conversion Time”); provided, however, that each Party shall use commercially reasonable efforts to provide four (4) business hours’ advance notice to the other Party of its request for a New Conversion Time. Any Scheduled Conversion Time or New Conversion Time may not be rescheduled more than one (1) time in a Business Day, and any two New Conversion Times for a particular Analog 2W Loop shall differ by at least eight (8) hours, unless otherwise agreed to by the Parties. 3.3.1.5 If the New Conversion Time is more than one (1) business hour from the original Scheduled Conversion Time or from the previous New Conversion Time, the Party requesting such New Conversion Time shall be subject to the following: 3.3.1.5.1 If Verizon requests to reschedule outside of the one (1) hour time frame above, the Analog 2W Loops Service Order Charge for the original Scheduled Conversion Time or the previous New Conversion Time shall be credited upon request from ATI; and 3.3.1.5.2 If ATI requests to reschedule outside the one (1) hour time frame above, ATI shall be charged an additional Analog 2W Loops Service Order Charge for rescheduling the conversion to the New Conversion Time. 3.3.1.6 If ATI is not ready to accept service at the Scheduled Conversion Time or at a New Conversion Time, as applicable, an additional Service Order Charge shall apply. If Verizon is not available or ready to perform the conversion within thirty (30) minutes of the Scheduled Conversion Time or New Conversion Time, as applicable, Verizon and ATI will reschedule and, upon request from ATI, Verizon will credit the Analog 2W Loop Service Order Charge for the original Scheduled Conversion Time. 3.3.1.7 The standard time interval expected from disconnection of a live Telephone Exchange Service to the connection of the Analog 2W Loops to ATI is fifteen (15) minutes per Analog 2W Loop for all orders consisting of twenty (20) Analog 2W Loops or less. Orders involving more than twenty (20) Loops will require a negotiated interval. 3.3.1.8 Conversions involving LNP will be completed according to North American Numbering Council (NANC) standards, via the regional Number Portability Administration Center (NPAC). 3.3.1.9 If ATI requires Analog 2W Loop conversions outside of the regularly scheduled Verizon RCCC operating hours, such conversions shall be separately negotiated. Additional charges (e.g. overtime labor charges) may apply for desired dates and times outside of regularly scheduled RCCC operating hours.

Conversion of Live Telephone Exchange Service to Analog 2W Loops. 3.3.1 The following coordination procedures shall apply to “live” cutovers of Verizon Customers who are converting their Telephone Exchange Services to ATI Connectel Telephone Exchange Services provisioned over Analog 2W unbundled Local Loops (“Analog 2W Loops) to be provided by Verizon to ATIConnectel: 3.3.1.1 Coordinated cutover charges shall apply to conversions of live Telephone Exchange Services to Analog 2W Loops. When an outside dispatch is required to perform a conversion, additional charges may apply. If ATI Connectel does not request a coordinated cutover, Verizon will process ATIConnectel’s order as a new installation subject to applicable standard provisioning intervals. 3.3.1.2 ATI Connectel shall request Analog 2W Loops for coordinated cutover from Verizon by delivering to Verizon a valid electronic Local Service Request (“LSR”). Xxxxxxx Verizon agrees to accept from ATI Connectel the date and time for the conversion designated on the LSR (“Scheduled Conversion Time”), provided that such designation is within the regularly scheduled operating hours of the Verizon Regional CLEC Control Center (“RCCC”) and subject to the availability of Verizon’s work force. In the event that XxxxxxxVerizon’s work force is not available, ATI Connectel and Verizon shall mutually agree on a New Conversion Time, as defined below. ATI Connectel shall designate the Scheduled Conversion Time subject to Verizon standard provisioning intervals as stated in the Verizon CLEC Handbook, as may be revised from time to time. Within three (3) Business Days of Verizon's receipt of such valid LSR, or as otherwise required by Applicable Law, Verizon shall provide ATI Connectel the scheduled due date for conversion of the Analog 2W Loops covered by such LSR. 3.3.1.3 ATI Connectel shall provide dial tone at the ATI collocation Connectel Collocation site at least forty-eight (48) hours prior to the Scheduled Conversion Time. 3.3.1.4 Either Party may contact the other Party to negotiate a new Scheduled Conversion Time (the “New Conversion Time”); provided, however, that each Party shall use commercially reasonable efforts to provide four (4) business hours’ advance notice to the other Party of its request for a New Conversion Time. Any Scheduled Conversion Time or New Conversion Time may not be rescheduled more than one (1) time in a Business Day, and any two New Conversion Times for a particular Analog 2W Loop shall differ by at least eight (8) hours, unless otherwise agreed to by the Parties. 3.3.1.5 If the New Conversion Time is more than one (1) business hour from the original Scheduled Conversion Time or from the previous New Conversion Time, the Party requesting such New Conversion Time shall be subject to the following: 3.3.1.5.1 If Verizon requests to reschedule outside of the one (1) hour time frame above, the Analog 2W Loops Service Order Charge for the original Scheduled Conversion Time or the previous New Conversion Time shall be credited upon request from ATIConnectel; and 3.3.1.5.2 If ATI Connectel requests to reschedule outside the one (1) hour time frame above, ATI Connectel shall be charged an additional Analog 2W Loops Service Order Charge for rescheduling the conversion to the New Conversion Time. 3.3.1.6 If ATI Connectel is not ready to accept service at the Scheduled Conversion Time or at a New Conversion Time, as applicable, an additional Service Order Charge shall apply. If Verizon is not available or ready to perform the conversion within thirty (30) minutes of the Scheduled Conversion Time or New Conversion Time, as applicable, Verizon and ATI Connectel will reschedule and, upon request from ATIConnectel, Verizon will credit the Analog 2W Loop Service Order Charge for the original Scheduled Conversion Time. 3.3.1.7 The standard time interval expected from disconnection of a live Telephone Exchange Service to the connection of the Analog 2W Loops to ATI Connectel is fifteen (15) minutes per Analog 2W Loop for all orders consisting of twenty (20) Analog 2W Loops or less. Orders involving more than twenty (20) Loops will require a negotiated interval. 3.3.1.8 Conversions involving LNP will be completed according to North American Numbering Council (NANC) standards, via the regional Number Portability Administration Center (NPAC). 3.3.1.9 If ATI Connectel requires Analog 2W Loop conversions outside of the regularly scheduled Verizon RCCC operating hours, such conversions shall be separately negotiated. Additional charges (e.g. overtime labor charges) may apply for desired dates and times outside of regularly scheduled RCCC operating hours.

Conversion of Live Telephone Exchange Service to Analog 2W Loops. 3.3.1 The following coordination procedures shall apply to “live” cutovers of Verizon Customers who are converting their Telephone Exchange Services to ATI CBB Telephone Exchange Services provisioned over Analog 2W unbundled Local Loops (“Analog 2W Loops) to be provided by Verizon to ATICBB: 3.3.1.1 Coordinated cutover charges shall apply to conversions of live Telephone Exchange Services to Analog 2W Loops. When an outside dispatch is required to perform a conversion, additional charges may apply. If ATI CBB does not request a coordinated cutover, Verizon will process ATICBB’s order as a new installation subject to applicable standard provisioning intervals. 3.3.1.2 ATI CBB shall request Analog 2W Loops for coordinated cutover from Verizon by delivering to Verizon a valid electronic Local Service Request (“LSR”). Xxxxxxx Verizon agrees to accept from ATI CBB the date and time for the conversion designated on the LSR (“Scheduled Conversion Time”), provided that such designation is within the regularly scheduled operating hours of the Verizon Regional CLEC Control Center (“RCCC”) and subject to the availability of Verizon’s work force. In the event that XxxxxxxVerizon’s work force is not available, ATI CBB and Verizon shall mutually agree on a New Conversion Time, as defined below. ATI CBB shall designate the Scheduled Conversion Time subject to Verizon standard provisioning intervals as stated in the Verizon CLEC Handbook, as may be revised from time to time. Within three (3) Business Days of Verizon's receipt of such valid LSR, or as otherwise required by Applicable Law, Verizon shall provide ATI CBB the scheduled due date for conversion of the Analog 2W Loops covered by such LSR. 3.3.1.3 ATI CBB shall provide dial tone at the ATI CBB collocation site at least forty-eight (48) hours prior to the Scheduled Conversion Time. 3.3.1.4 Either Party may contact the other Party to negotiate a new Scheduled Conversion Time (the “New Conversion Time”); provided, however, that each Party shall use commercially reasonable efforts to provide four (4) business hours’ advance notice to the other Party of its request for a New Conversion Time. Any Scheduled Conversion Time or New Conversion Time may not be rescheduled more than one (1) time in a Business Day, and any two New Conversion Times for a particular Analog 2W Loop shall differ by at least eight (8) hours, unless otherwise agreed to by the Parties. 3.3.1.5 If the New Conversion Time is more than one (1) business hour from the original Scheduled Conversion Time or from the previous New Conversion Time, the Party requesting such New Conversion Time shall be subject to the following: 3.3.1.5.1 If Verizon requests to reschedule outside of the one (1) hour time frame above, the Analog 2W Loops Service Order Charge for the original Scheduled Conversion Time or the previous New Conversion Time shall be credited upon request from ATICBB; and 3.3.1.5.2 If ATI CBB requests to reschedule outside the one one (1) hour time frame above, ATI CBB shall be charged an additional Analog 2W Loops Service Order Charge for rescheduling the conversion to the New Conversion Time. 3.3.1.6 If ATI CBB is not ready to accept service at the Scheduled Conversion Time or at a New Conversion Time, as applicable, an additional Service Order Charge shall apply. If Verizon is not available or ready to perform the conversion within thirty (30) minutes of the Scheduled Conversion Time or New Conversion Time, as applicable, Verizon and ATI CBB will reschedule and, upon request from ATICBB, Verizon will credit the Analog 2W Loop Service Order Charge for the original Scheduled Conversion Time. 3.3.1.7 The standard time interval expected from disconnection of a live Telephone Exchange Service to the connection of the Analog 2W Loops to ATI CBB is fifteen (15) minutes per Analog 2W Loop for all orders consisting of twenty (20) Analog 2W Loops or less. Orders involving more than twenty (20) Loops will require a negotiated interval. 3.3.1.8 Conversions involving LNP will be completed according to North American Numbering Council (NANC) standards, via the regional Number Portability Administration Center (NPAC). 3.3.1.9 If ATI CBB requires Analog 2W Loop conversions outside of the regularly scheduled Verizon RCCC operating hours, such conversions shall be separately negotiated. Additional charges (e.g. overtime labor charges) may apply for desired dates and times outside of regularly scheduled RCCC operating hours.

Conversion of Live Telephone Exchange Service to Analog 2W Loops. 3.3.1 The following coordination procedures shall apply to “live” cutovers of Verizon Customers who are converting their Telephone Exchange Services to ATI PNG Telephone Exchange Services provisioned over Analog 2W unbundled Local Loops (“Analog 2W Loops) to be provided by Verizon to ATIPNG: 3.3.1.1 Coordinated cutover charges shall apply to conversions of live Telephone Exchange Services to Analog 2W Loops. When an outside dispatch is required to perform a conversion, additional charges may apply. If ATI PNG does not request a coordinated cutover, Verizon will process ATIPNG’s order as a new installation subject to applicable standard provisioning intervals. 3.3.1.2 ATI PNG shall request Analog 2W Loops for coordinated cutover from Verizon by delivering to Verizon a valid electronic Local Service Request (“LSR”). Xxxxxxx Verizon agrees to accept from ATI PNG the date and time for the conversion designated on the LSR (“Scheduled Conversion Time”), provided that such designation is within the regularly scheduled operating hours of the Verizon Regional CLEC Control Center (“RCCC”) and subject to the availability of Verizon’s work force. In the event that XxxxxxxVerizon’s work force is not available, ATI PNG and Verizon shall mutually agree on a New Conversion Time, as defined below. ATI PNG shall designate the Scheduled Conversion Time subject to Verizon standard provisioning intervals as stated in the Verizon CLEC Handbook, as may be revised from time to time. Within three (3) Business Days of Verizon's receipt of such valid LSR, or as otherwise required by Applicable Law, Verizon shall provide ATI PNG the scheduled due date for conversion of the Analog 2W Loops covered by such LSR. 3.3.1.3 ATI PNG shall provide dial tone at the ATI collocation PNG Collocation site at least forty-eight (48) hours prior to the Scheduled Conversion Time. 3.3.1.4 Either Party may contact the other Party to negotiate a new Scheduled Conversion Time (the “New Conversion Time”); provided, however, that each Party shall use commercially reasonable efforts to provide four (4) business hours’ advance notice to the other Party of its request for a New Conversion Time. Any Scheduled Conversion Time or New Conversion Time may not be rescheduled more than one (1) time in a Business Day, and any two New Conversion Times for a particular Analog 2W Loop shall differ by at least eight (8) hours, unless otherwise agreed to by the Parties. 3.3.1.5 If the New Conversion Time is more than one (1) business hour from the original Scheduled Conversion Time or from the previous New Conversion Time, the Party requesting such New Conversion Time shall be subject to the following: 3.3.1.5.1 If Verizon requests to reschedule outside of the one (1) hour time frame above, the Analog 2W Loops Service Order Charge for the original Scheduled Conversion Time or the previous New Conversion Time shall be credited upon request from ATIPNG; and 3.3.1.5.2 If ATI PNG requests to reschedule outside the one one (1) hour time frame above, ATI PNG shall be charged an additional Analog 2W Loops Service Order Charge for rescheduling the conversion to the New Conversion Time. 3.3.1.6 If ATI PNG is not ready to accept service at the Scheduled Conversion Time or at a New Conversion Time, as applicable, an additional Service Order Charge shall apply. If Verizon is not available or ready to perform the conversion within thirty (30) minutes of the Scheduled Conversion Time or New Conversion Time, as applicable, Verizon and ATI PNG will reschedule and, upon request from ATIPNG, Verizon will credit the Analog 2W Loop Service Order Charge for the original Scheduled Conversion Time. 3.3.1.7 The standard time interval expected from disconnection of a live Telephone Exchange Service to the connection of the Analog 2W Loops to ATI PNG is fifteen (15) minutes per Analog 2W Loop for all orders consisting of twenty (20) Analog 2W Loops or less. Orders involving more than twenty (20) Loops will require a negotiated interval. 3.3.1.8 Conversions involving LNP will be completed according to North American Numbering Council (NANC) standards, via the regional Number Portability Administration Center (NPAC). 3.3.1.9 If ATI PNG requires Analog 2W Loop conversions outside of the regularly scheduled Verizon RCCC operating hours, such conversions shall be separately negotiated. Additional charges (e.g. overtime labor charges) may apply for desired dates and times outside of regularly scheduled RCCC operating hours.

Conversion of Live Telephone Exchange Service to Analog 2W Loops. 3.3.1 The following coordination procedures shall apply to “live” cutovers of Verizon VERIZON Customers who are converting their Telephone Exchange Services to ATI SPRINT Telephone Exchange Services provisioned over Analog 2W unbundled Local Loops (“Analog 2W Loops”) to be provided by Verizon VERIZON to ATI:SPRINT. 3.3.1.1 Coordinated 1.9.1 Subject to approval by the Department, coordinated cutover charges shall apply to conversions of live Telephone Exchange Services to Analog 2W Loops. When an outside dispatch is required to perform a conversion, additional charges may apply. If ATI SPRINT does not request a coordinated cutover, Verizon VERIZON will process ATISPRINT’s order as a new installation subject to applicable standard provisioning intervals. 3.3.1.2 ATI 1.9.2 SPRINT shall request Analog 2W Loops for coordinated cutover from Verizon VERIZON by delivering to Verizon VERIZON a valid electronic Local Service Request (“LSR”). Xxxxxxx VERIZON agrees to accept from ATI SPRINT the date and time for the conversion designated on the LSR (“Scheduled Conversion Time”), provided that such designation is within the regularly scheduled operating hours of the Verizon VERIZON Regional CLEC Control Center (“RCCC”) and subject to the availability of VerizonVERIZON’s work force. In the event that XxxxxxxVERIZON’s work force is not available, ATI SPRINT and Verizon VERIZON shall mutually agree on a New Conversion Time, as defined below. ATI SPRINT shall designate the Scheduled Conversion Time subject to Verizon VERIZON standard provisioning intervals as stated in the Verizon VERIZON CLEC Handbook, as may be revised from time to time. Within three two (32) Business Days business days of VerizonVERIZON's receipt of such valid LSR, or as otherwise required by Applicable Law, Verizon VERIZON shall provide ATI SPRINT the scheduled due firm order commitment (“FOC”) date for conversion of by which the Analog 2W Loops covered by such LSRLSR will be converted. 3.3.1.3 ATI 1.9.3 SPRINT shall provide dial tone at the ATI collocation SPRINT Collocation site at least forty-eight (48) hours prior to the Scheduled Conversion Time. 3.3.1.4 1.9.4 Either Party may contact the other Party to negotiate a new Scheduled Conversion Time (the “New Conversion Time”); provided, however, that each Party shall use commercially reasonable efforts to provide four (4) business hours’ advance notice to the other Party of its request for a New Conversion Time. Any Scheduled Conversion Time or New Conversion Time may not be rescheduled more than one one (1) time in a Business Daybusiness day, and any two New Conversion Times for a particular Analog 2W Loop Loops shall differ by at least eight (8) hours, unless otherwise agreed to by the Parties. 3.3.1.5 1.9.4.1 If the New Conversion Time is more than one (1) business hour from the original Scheduled Conversion Time or from the previous New Conversion Time, the Party requesting such New Conversion Time shall be subject to the following: 3.3.1.5.1 (i) If Verizon VERIZON requests to reschedule outside of the one (1) hour time frame above, the Analog 2W Loops Service Order Charge for the original Scheduled Conversion Time or the previous New Conversion Time shall be credited waived upon request from ATISPRINT; and 3.3.1.5.2 (ii) If ATI SPRINT requests to reschedule outside the one (1) hour time frame above, ATI SPRINT shall be charged an additional Analog 2W Loops Service Order Charge for rescheduling the conversion to the New Conversion Time. 3.3.1.6 1.9.5 If ATI SPRINT is not ready to accept service at the Scheduled Conversion Time or at a New Conversion Time, as applicable, an additional Service Order Charge shall apply. If Verizon VERIZON is not available or ready to perform the conversion within thirty (30) minutes of the Scheduled Conversion Time or New Conversion Time, as applicable, Verizon VERIZON and ATI SPRINT will reschedule and, upon request from ATISPRINT, Verizon VERIZON will credit waive the Analog 2W Loop Service Order Charge for the original Scheduled Conversion Time. 3.3.1.7 1.9.6 The standard time interval expected from disconnection of a live Telephone Exchange Service to the connection of the Analog 2W Loops to ATI SPRINT is fifteen (15) minutes per Analog 2W Loop for all orders consisting of twenty (20) Analog 2W Loops or less. Orders involving more than twenty (20) Loops will require a negotiated interval. 3.3.1.8 1.9.7 Conversions involving LNP will be completed according to North American Numbering Council (“NANC”) standards, via the regional Number Portability Administration Center (“NPAC”). 3.3.1.9 1.9.8 If ATI SPRINT requires Analog 2W Loop Loops conversions outside of the regularly scheduled Verizon VERIZON RCCC operating hours, such conversions shall be separately negotiated. Additional charges (e.g. overtime labor charges) may apply for desired dates and times outside of regularly scheduled RCCC operating hours.

Conversion of Live Telephone Exchange Service to Analog 2W Loops. 3.3.1 3.17.1 The following coordination procedures shall apply to “live” cutovers of Verizon Customers who are converting their Telephone Exchange Services to ATI BTLLC Telephone Exchange Services provisioned over Analog 2W unbundled Local Loops (“Analog 2W Loops) to be provided by Verizon to ATIBTLLC: 3.3.1.1 3.17.1.1 Coordinated cutover charges shall apply to conversions of live Telephone Exchange Services to Analog 2W Loops. When an outside dispatch is required to perform a conversion, additional charges may apply. If ATI BTLLC does not request a coordinated cutover, Verizon will process ATIBTLLC’s order as a new installation subject to applicable standard provisioning intervals. 3.3.1.2 ATI 3.17.1.2 BTLLC shall request Analog 2W Loops for coordinated cutover from Verizon by delivering to Verizon a valid electronic Local Service Request (“LSR”). Xxxxxxx Verizon agrees to accept from ATI BTLLC the date and time for the conversion designated on the LSR (“Scheduled Conversion Time”), provided that such designation is within the regularly scheduled operating hours of the Verizon Regional CLEC Control Center (“RCCC”) and subject to the availability of Verizon’s work force. In the event that XxxxxxxVerizon’s work force is not available, ATI BTLLC and Verizon shall mutually agree on a New Conversion Time, as defined below. ATI BTLLC shall designate the Scheduled Conversion Time subject to Verizon standard provisioning intervals as stated in the Verizon CLEC Handbook, as may be revised from time to time. Within three (3) Business Days of Verizon's receipt of such valid LSR, or as otherwise required by Applicable Law, Verizon shall provide ATI BTLLC the scheduled due date for conversion of the Analog 2W Loops covered by such LSR. 3.3.1.3 ATI 3.17.1.3 BTLLC shall provide dial tone at the ATI collocation BTLLC Collocation site at least forty-eight (48) hours prior to the Scheduled Conversion Time. 3.3.1.4 3.17.1.4 Either Party may contact the other Party to negotiate a new Scheduled Conversion Time (the “New Conversion Time”); provided, however, that each Party shall use commercially reasonable efforts to provide four (4) business hours’ advance notice to the other Party of its request for a New Conversion Time. Any Scheduled Conversion Time or New Conversion Time may not be rescheduled more than one (1) time in a Business Day, and any two New Conversion Times for a particular Analog 2W Loop Loops shall differ by at least eight (8) hours, unless otherwise agreed to by the Parties. 3.3.1.5 3.17.1.5 If the New Conversion Time is more than one (1) business hour from the original Scheduled Conversion Time or from the previous New Conversion Time, the Party requesting such New Conversion Time shall be subject to the following: 3.3.1.5.1 3.17.1.5.1 If Verizon requests to reschedule outside of the one (1) hour time frame above, the Analog 2W Loops Service Order Charge for the original Scheduled Conversion Time or the previous New Conversion Time shall be credited waived upon request from ATIBTLLC; and 3.3.1.5.2 3.17.1.5.2 If ATI BTLLC requests to reschedule outside the one one (1) hour time frame above, ATI BTLLC shall be charged an additional Analog 2W Loops Service Order Charge for rescheduling the conversion to the New Conversion Time. 3.3.1.6 3.17.1.6 If ATI BTLLC is not ready to accept service at the Scheduled Conversion Time or at a New Conversion Time, as applicable, an additional Service Order Charge shall apply. If Verizon is not available or ready to perform the conversion within thirty (30) minutes of the Scheduled Conversion Time or New Conversion Time, as applicable, Verizon and ATI BTLLC will reschedule and, upon request from ATIBTLLC, Verizon will credit waive the Analog 2W Loop Service Order Charge for the original Scheduled Conversion Time. 3.3.1.7 3.17.1.7 The standard time interval expected from disconnection of a live Telephone Exchange Service to the connection of the Analog 2W Loops to ATI BTLLC is fifteen (15) minutes per Analog 2W Loop for all orders consisting of twenty (20) Analog 2W Loops or less. Orders involving more than twenty (20) Loops will require a negotiated interval. 3.3.1.8 3.17.1.8 Conversions involving LNP will be completed according to North American Numbering Council (“NANC”) standards, via the regional Number Portability Administration Center (“NPAC”). 3.3.1.9 3.17.1.9 If ATI BTLLC requires Analog 2W Loop conversions outside of the regularly scheduled Verizon RCCC operating hours, such conversions shall be separately negotiated. Additional charges (e.g. overtime labor charges) may apply for desired dates and times outside of regularly scheduled RCCC operating hours.

Conversion of Live Telephone Exchange Service to Analog 2W Loops. 3.3.1 The following coordination procedures shall apply to “live” cutovers of Verizon Customers who are converting their Telephone Exchange Services to ATI PW Telephone Exchange Services provisioned over Analog 2W unbundled Local Loops (“Analog 2W Loops) to be provided by Verizon to ATIPW: 3.3.1.1 Coordinated cutover charges shall apply to conversions of live Telephone Exchange Services to Analog 2W Loops. When an outside dispatch is required to perform a conversion, additional charges may apply. If ATI PW does not request a coordinated cutover, Verizon will process ATIPW’s order as a new installation subject to applicable standard provisioning intervals. 3.3.1.2 ATI PW shall request Analog 2W Loops for coordinated cutover from Verizon by delivering to Verizon a valid electronic Local Service Request (“LSR”). Xxxxxxx agrees to accept from ATI PW the date and time for the conversion designated on the LSR (“Scheduled Conversion Time”), provided that such designation is within the regularly scheduled operating hours of the Verizon Regional CLEC Control Center (“RCCC”) and subject to the availability of Verizon’s work force. In the event that Xxxxxxx’s work force is not available, ATI PW and Verizon shall mutually agree on a New Conversion Time, as defined below. ATI PW shall designate the Scheduled Conversion Time subject to Verizon standard provisioning intervals as stated in the Verizon CLEC Handbook, as may be revised from time to time. Within three (3) Business Days of Verizon's receipt of such valid LSR, or as otherwise required by Applicable Law, Verizon shall provide ATI PW the scheduled due date for conversion of the Analog 2W Loops covered by such LSR. 3.3.1.3 ATI PW shall provide dial tone at the ATI PW collocation site at least forty-eight (48) hours prior to the Scheduled Conversion Time. 3.3.1.4 Either Party may contact the other Party to negotiate a new Scheduled Conversion Time (the “New Conversion Time”); provided, however, that each Party shall use commercially reasonable efforts to provide four (4) business hours’ advance notice to the other Party of its request for a New Conversion Time. Any Scheduled Conversion Time or New Conversion Time may not be rescheduled more than one (1) time in a Business Day, and any two New Conversion Times for a particular Analog 2W Loop shall differ by at least eight (8) hours, unless otherwise agreed to by the Parties. 3.3.1.5 If the New Conversion Time is more than one (1) business hour from the original Scheduled Conversion Time or from the previous New Conversion Time, the Party requesting such New Conversion Time shall be subject to the following: 3.3.1.5.1 If Verizon requests to reschedule outside of the one (1) hour time frame above, the Analog 2W Loops Service Order Charge for the original Scheduled Conversion Time or the previous New Conversion Time shall be credited upon request from ATIPW; and 3.3.1.5.2 If ATI PW requests to reschedule outside the one (1) hour time frame above, ATI PW shall be charged an additional Analog 2W Loops Service Order Charge for rescheduling the conversion to the New Conversion Time. 3.3.1.6 If ATI PW is not ready to accept service at the Scheduled Conversion Time or at a New Conversion Time, as applicable, an additional Service Order Charge shall apply. If Verizon is not available or ready to perform the conversion within thirty (30) minutes of the Scheduled Conversion Time or New Conversion Time, as applicable, Verizon and ATI PW will reschedule and, upon request from ATIPW, Verizon will credit the Analog 2W Loop Service Order Charge for the original Scheduled Conversion Time. 3.3.1.7 The standard time interval expected from disconnection of a live Telephone Exchange Service to the connection of the Analog 2W Loops to ATI PW is fifteen (15) minutes per Analog 2W Loop for all orders consisting of twenty (20) Analog 2W Loops or less. Orders involving more than twenty (20) Loops will require a negotiated interval. 3.3.1.8 Conversions involving LNP will be completed according to North American Numbering Council (NANC) standards, via the regional Number Portability Administration Center (NPAC). 3.3.1.9 If ATI PW requires Analog 2W Loop conversions outside of the regularly scheduled Verizon RCCC operating hours, such conversions shall be separately negotiated. Additional charges (e.g. overtime labor charges) may apply for desired dates and times outside of regularly scheduled RCCC operating hours.

Conversion of Live Telephone Exchange Service to Analog 2W Loops. 3.3.1 3.17.1 The following coordination procedures shall apply to “live” cutovers of Verizon Customers who are converting their Telephone Exchange Services to ATI GNAPs Telephone Exchange Services provisioned over Analog 2W unbundled Local Loops (“Analog 2W Loops) to be provided by Verizon to ATIGNAPs: 3.3.1.1 3.17.1.1 Coordinated cutover charges shall apply to conversions of live Telephone Exchange Services to Analog 2W Loops. When an outside dispatch is required to perform a conversion, additional charges may apply. If ATI GNAPs does not request a coordinated cutover, Verizon will process ATI’s GNAPs’ order as a new installation subject to applicable standard provisioning intervals. 3.3.1.2 ATI 3.17.1.2 GNAPs shall request Analog 2W Loops for coordinated cutover from Verizon by delivering to Verizon a valid electronic Local Service Request (“LSR”). Xxxxxxx agrees to accept from ATI GNAPs the date and time for the conversion designated on the LSR (“Scheduled Conversion Time”), provided that such designation is within the regularly scheduled operating hours of the Verizon Regional CLEC Control Center (“RCCC”) and subject to the availability of Verizon’s work force. In the event that Xxxxxxx’s work force is not available, ATI GNAPs and Verizon shall mutually agree on a New Conversion Time, as defined below. ATI GNAPs shall designate the Scheduled Conversion Time subject to Verizon standard provisioning intervals as stated in the Verizon CLEC Handbook, as may be revised from time to time. Within three (3) Business Days of Verizon's receipt of such valid LSR, or as otherwise required by Applicable Law, Verizon shall provide ATI GNAPs the scheduled due date for conversion of the Analog 2W Loops covered by such LSR. 3.3.1.3 ATI 3.17.1.3 GNAPs shall provide dial tone at the ATI collocation GNAPs Collocation site at least forty-eight (48) hours prior to the Scheduled Conversion Time. 3.3.1.4 3.17.1.4 Either Party may contact the other Party to negotiate a new Scheduled Conversion Time (the “New Conversion Time”); provided, however, that each Party shall use commercially reasonable efforts to provide four (4) business hours’ advance notice to the other Party of its request for a New Conversion Time. Any Scheduled Conversion Time or New Conversion Time may not be rescheduled more than one (1) time in a Business Daybusiness day, and any two New Conversion Times for a particular Analog 2W Loop shall differ by at least eight (8) hours, unless otherwise agreed to by the Parties. 3.3.1.5 3.17.1.5 If the New Conversion Time is more than one (1) business hour from the original Scheduled Conversion Time or from the previous New Conversion Time, the Party requesting such New Conversion Time shall be subject to the following: 3.3.1.5.1 3.17.1.5.1 If Verizon requests to reschedule outside of the one (1) hour time frame above, the Analog 2W Loops Service Order Charge for the original Scheduled Conversion Time or the previous New Conversion Time shall be credited waived upon request from ATIGNAPs; and 3.3.1.5.2 3.17.1.5.2 If ATI GNAPs requests to reschedule outside the one (1) hour time frame above, ATI GNAPs shall be charged an additional Analog 2W Loops Service Order Charge for rescheduling the conversion to the New Conversion Time. 3.3.1.6 3.17.1.6 If ATI GNAPs is not ready to accept service at the Scheduled Conversion Time or at a New Conversion Time, as applicable, an additional Service Order Charge shall apply. If Verizon is not available or ready to perform the conversion within thirty (30) minutes of the Scheduled Conversion Time or New Conversion Time, as applicable, Verizon and ATI GNAPs will reschedule and, upon request from ATIGNAPs, Verizon will credit waive the Analog 2W Loop Service Order Charge for the original Scheduled Conversion Time. 3.3.1.7 3.17.1.7 The standard time interval expected from disconnection of a live Telephone Exchange Service to the connection of the Analog 2W Loops to ATI GNAPs is fifteen (15) minutes per Analog 2W Loop for all orders consisting of twenty (20) Analog 2W Loops or less. Orders involving more than twenty (20) Loops will require a negotiated interval. 3.3.1.8 3.17.1.8 Conversions involving LNP will be completed according to North American Numbering Council (“NANC”) standards, via the regional Number Portability Administration Center (“NPAC”). 3.3.1.9 3.17.1.9 If ATI GNAPs requires Analog 2W Loop conversions outside of the regularly scheduled Verizon RCCC operating hours, such conversions shall be separately negotiated. Additional charges (e.g. overtime labor charges) may apply for desired dates and times outside of regularly scheduled RCCC operating hours.

Conversion of Live Telephone Exchange Service to Analog 2W Loops. 3.3.1 The following coordination procedures shall apply to “live” cutovers of Verizon Customers who are converting their Telephone Exchange Services to ATI TCG Telephone Exchange Services provisioned over Analog 2W unbundled Local Loops (“Analog 2W Loops”) to be provided by Verizon to ATI:TCG. 3.3.1.1 11.9.1 Coordinated cutover charges charges, including but not limited to outside dispatch charges, where applicable, shall apply to conversions of live Telephone Exchange Services to Analog 2W Loops. When an outside dispatch is required to perform a conversion, additional charges may apply. as set forth in Exhibit A. If ATI TCG does not request a coordinated cutover, Verizon will process ATITCG’s order as a new installation subject to applicable standard provisioning intervals. 3.3.1.2 ATI 11.9.2 TCG shall request Analog 2W Loops for coordinated cutover from Verizon by delivering to Verizon a valid electronic Local Service Request (“LSR”)) in accordance with the terms of Section 11.6. Xxxxxxx agrees to accept from ATI TCG shall designate the requested date and time for the conversion designated on the LSR (“Scheduled Conversion Time”)) subject to Verizon standard provisioning intervals, as may be revised from time to time. Subject to the immediately preceding sentence, Verizon agrees to accept from TCG the Scheduled Conversion Time, provided that such designation is within the regularly scheduled operating hours of the Verizon Regional CLEC Control Center (“RCCC”) and subject to the availability of Verizon’s work force. In the event that XxxxxxxVerizon’s work force is not available, ATI TCG and Verizon shall mutually agree on a New Conversion Time, as defined below. ATI shall designate the Scheduled Conversion Time subject to Verizon standard provisioning intervals as stated in the Verizon CLEC Handbook, as may be revised from time to time. Within three (3) Business Days business days of Verizon's ’s receipt of such a valid LSR, or except as otherwise required by Applicable Law, Verizon shall provide ATI TCG the scheduled due date for conversion of by which the Analog 2W Loops covered by such LSRLSR will be converted. 3.3.1.3 ATI 11.9.3 TCG shall provide dial tone at the ATI collocation TCG Collocation site at least forty-eight (48) hours prior to the Scheduled Conversion TimeTime such that Verizon may verify dial tone as provided herein. Verizon shall verify dial tone on the loop scheduled to be migrated to TCG and shall also verify TCG dial tone from the TCG Collocation cage. If Verizon is unable to verify such dial tone, Verizon shall take appropriate steps to address the problem, including promptly notifying TCG, as may be required. 3.3.1.4 11.9.4 Either Party may contact the other Party to negotiate a new Scheduled Conversion Time (the “New Conversion Time”); , provided, however, that each Party shall use commercially reasonable efforts to provide four (4) business hours’ advance notice to the other Party of its request for a New Conversion Time. Any Scheduled Conversion Time or New Conversion Time may not be rescheduled more than one one (1) time in a Business Daybusiness day, and any two New Conversion Times for a particular Analog 2W Loop Loops shall differ by at least eight (8) hours, unless otherwise agreed to by the Parties. 3.3.1.5 11.9.4.1 If the New Conversion Time is more than one (1) business hour from the original Scheduled Conversion Time or from the previous New Conversion Time, the Party requesting such New Conversion Time shall be subject to the following: 3.3.1.5.1 (i) If Verizon requests to reschedule outside of the one (1) hour time frame above, the Analog 2W Loops Service Order Charge for the original Scheduled Conversion Time or the previous New Conversion Time shall be credited upon request from ATI; waived, and 3.3.1.5.2 (ii) If ATI TCG requests to reschedule outside the one (1) hour time frame above, ATI TCG shall be charged an additional Analog 2W Loops Service Order Charge for rescheduling the conversion to the New Conversion Time. 3.3.1.6 11.9.5 If ATI TCG is not ready to accept service at the Scheduled Conversion Time or at a New Conversion Time, as applicable, an additional Service Order Charge shall apply. If Verizon is not available or ready to perform the conversion within thirty (30) minutes of the Scheduled Conversion Time or New Conversion Time, as applicable, Verizon and ATI TCG will reschedule and, upon request from ATI, and Verizon will credit waive the Analog 2W Loop Service Order Charge for the original Scheduled Conversion Time. 3.3.1.7 The standard time interval expected from disconnection of a live Telephone Exchange Service to the connection of the Analog 2W Loops to ATI is fifteen (15) minutes per Analog 2W Loop for all orders consisting of twenty (20) Analog 2W Loops or less. Orders involving more than twenty (20) Loops will require a negotiated interval. 3.3.1.8 11.9.6 Conversions involving LNP will be completed according to North American Numbering Council (“NANC”) standards, via the regional Number Portability Administration Center (“NPAC”). 3.3.1.9 11.9.7 If ATI TCG requires Analog 2W Loop conversions outside of the regularly scheduled Verizon RCCC operating hours, such conversions shall be separately negotiated. Additional charges (e.g. e.g., overtime labor charges) may apply for desired dates and times outside of regularly scheduled RCCC operating hours. 11.9.8 After receiving notification of completion of the hot cut by Verizon, TCG will confirm operation of the loop. In the event the loop is not functional, TCG may submit the necessary trouble ticket to initiate a request for repair. 11.9.9 If TCG and Verizon cannot isolate and fix the problem, TCG may request that the Customer be restored to service on the Verizon network. Such restoration shall occur within a commercially reasonable time period.

Conversion of Live Telephone Exchange Service to Analog 2W Loops. 3.3.1 3.17.1 The following coordination procedures shall apply to “live” cutovers of Verizon Customers who are converting their Telephone Exchange Services to ATI Rhythms Telephone Exchange Services provisioned over Analog 2W unbundled Local Loops (“Analog 2W Loops) to be provided by Verizon to ATIRhythms: 3.3.1.1 3.17.1.1 Coordinated cutover charges shall apply to conversions of live Telephone Exchange Services to Analog 2W Loops. When an outside dispatch is required to perform a conversion, additional charges may apply. If ATI Rhythms does not request a coordinated cutover, Verizon will process ATI’s Rhythms' order as a new installation subject to applicable standard provisioning intervals. 3.3.1.2 ATI 3.17.1.2 Rhythms shall request Analog 2W Loops for coordinated cutover from Verizon by delivering to Verizon a valid electronic Local Service Request (“LSR”). Xxxxxxx agrees to accept from ATI Rhythms the date and time for the conversion designated on the LSR (“Scheduled Conversion Time”), provided that such designation is within the regularly scheduled operating hours of the Verizon Regional CLEC Control Center (“RCCC”) and subject to the availability of Verizon’s work force. In the event that Xxxxxxx’s work force is not available, ATI Rhythms and Verizon shall mutually agree on a New Conversion Time, as defined below. ATI Rhythms shall designate the Scheduled Conversion Time subject to Verizon standard provisioning intervals as stated in the Verizon CLEC Handbook, as may be revised from time to time. Within three (3) Business Days of Verizon's receipt of such valid LSR, or as otherwise required by Applicable Law, Verizon shall provide ATI Rhythms the scheduled due date for conversion of the Analog 2W Loops covered by such LSR. 3.3.1.3 ATI 3.17.1.3 Rhythms shall provide dial tone at the ATI collocation Rhythms Collocation site at least forty-eight (48) hours prior to the Scheduled Conversion Time. 3.3.1.4 3.17.1.4 Either Party may contact the other Party to negotiate a new Scheduled Conversion Time (the “New Conversion Time”); provided, however, that each Party shall use commercially reasonable efforts to provide four (4) business hours’ advance notice to the other Party of its request for a New Conversion Time. Any Scheduled Conversion Time or New Conversion Time may not be rescheduled more than one (1) time in a Business Daybusiness day, and any two New Conversion Times for a particular Analog 2W Loop Loops shall differ by at least eight (8) hours, unless otherwise agreed to by the Parties. 3.3.1.5 3.17.1.5 If the New Conversion Time is more than one (1) business hour from the original Scheduled Conversion Time or from the previous New Conversion Time, the Party requesting such New Conversion Time shall be subject to the following: 3.3.1.5.1 3.17.1.5.1 If Verizon requests to reschedule outside of the one (1) hour time frame above, the Analog 2W Loops Service Order Charge for the original Scheduled Conversion Time or the previous New Conversion Time shall be credited waived upon request from ATIRhythms; and 3.3.1.5.2 3.17.1.5.2 If ATI Rhythms requests to reschedule outside the one (1) hour time frame above, ATI Rhythms shall be charged an additional Analog 2W Loops Service Order Charge for rescheduling the conversion to the New Conversion Time. 3.3.1.6 3.17.1.6 If ATI Rhythms is not ready to accept service at the Scheduled Conversion Time or at a New Conversion Time, as applicable, an additional Service Order Charge shall apply. If Verizon is not available or ready to perform the conversion within thirty (30) minutes of the Scheduled Conversion Time or New Conversion Time, as applicable, Verizon and ATI Rhythms will reschedule and, upon request from ATIRhythms, Verizon will credit waive the Analog 2W Loop Service Order Charge for the original Scheduled Conversion Time. 3.3.1.7 3.17.1.7 The standard time interval expected from disconnection of a live Telephone Exchange Service to the connection of the Analog 2W Loops to ATI Rhythms is fifteen (15) minutes per Analog 2W Loop for all orders consisting of twenty (20) Analog 2W Loops or less. Orders involving more than twenty (20) Loops will require a negotiated interval. 3.3.1.8 3.17.1.8 Conversions involving LNP will be completed according to North American Numbering Council (“NANC”) standards, via the regional Number Portability Administration Center (“NPAC”). 3.3.1.9 3.17.1.9 If ATI Rhythms requires Analog 2W Loop conversions outside of the regularly scheduled Verizon RCCC operating hours, such conversions shall be separately negotiated. Additional charges (e.g. overtime labor charges) may apply for desired dates and times outside of regularly scheduled RCCC operating hours.

Conversion of Live Telephone Exchange Service to Analog 2W Loops. 3.3.1 3.18.1 The following coordination procedures shall apply to “live” cutovers of Verizon Customers who are converting their Telephone Exchange Services to ATI Tech Com Telephone Exchange Services provisioned over Analog 2W unbundled Local Loops (“Analog 2W Loops) to be provided by Verizon to ATITech Com: 3.3.1.1 3.18.1.1 Coordinated cutover charges shall apply to conversions of live Telephone Exchange Services to Analog 2W Loops. When an outside dispatch is required to perform a conversion, additional charges may apply. If ATI Tech Com does not request requests a coordinated cutover, Verizon will process ATITech Com’s order Order as a new installation subject at parity with the quality of service provided to applicable standard provisioning intervalsVerizon retail customers, measured as the percentage of conversions with disrupted service compared to the total number of conversions or orders undertaken by Verizon in Wisconsin during the same period of time, as ordered by the Commission in Docket No. 05-MA-132. 3.3.1.2 ATI 3.18.1.2 Tech Com shall request Analog 2W Loops for coordinated cutover from Verizon by delivering to Verizon a valid electronic Local Service Request (“LSR”). Xxxxxxx Verizon agrees to accept from ATI Tech Com the date and time for the conversion designated on the LSR (“Scheduled Conversion Time”), provided that such designation is within the regularly scheduled operating hours of the Verizon Regional CLEC Control Center (“RCCC”) and subject to the availability of Verizon’s work force. In the event that XxxxxxxVerizon’s work force is not available, ATI Tech Com and Verizon shall mutually agree on a New Conversion Time, as defined below. ATI Tech Com shall designate the Scheduled Conversion Time subject to Verizon Verizon’s standard provisioning intervals as stated in the Verizon CLEC Handbook, as may be revised from time to time. Within three (3) Business Days the time frames specified in this Section 3.18.1.2 of Verizon's receipt of such valid LSR, or as otherwise required by Applicable Law, Verizon shall provide ATI Tech Com the scheduled due date for conversion of the Analog 2W Loops covered by such LSR. 3.3.1.3 ATI 3.18.1.2.1 For orders submitted to Verizon by Tech Com, Verizon’s performance for order confirmation timeliness shall be measured in accordance with Metric OR-1, “Order Confirmation Timeliness,” of Attachment A-2b of the Carrier-to-Carrier Performance Assurance Plan set out in Appendix D, Attachment A, “Carrier-to-Carrier Performance Assurance Plan,” of the Merger Order as in effect on the Effective Date of this Agreement, as set out in Exhibit A to the Unbundled Network Elements Attachment, attached. 3.18.1.2.2 For orders submitted to Verizon by Tech Com, Verizon shall meet the performance standards for order confirmation timeliness set out in Exhibit A to the Unbundled Network Elements Attachment, attached, as may be further affected by the applicable related provisions of the Merger Order. 3.18.1.2.3 Xxxxxx XX-0, “Order Confirmation Timeliness,” as in effect on the Effective Date of this Agreement, is set out in Exhibit A to the Unbundled Network Elements Attachment, attached. Xxxxxx XX-0, “Order Confirmation Timeliness,” shall be subject to change from time-to-time as provided in Section 31.2.3 of the General Terms and Conditions of this Agreement. 3.18.1.3 Tech Com shall provide dial tone at the ATI collocation site at least fortytwenty-eight four (4824) hours prior to the Scheduled Conversion Time. 3.3.1.4 3.18.1.4 Either Party may contact the other Party to negotiate a new Scheduled Conversion Time (the “New Conversion Time”); provided, however, that each Party shall use commercially reasonable efforts to provide no less than twenty-four (424) business hours’ advance notice to the other Party of its request for a New Conversion Time. Any Scheduled Conversion Time or New Conversion Time may not be rescheduled more than one one (1) time in a Business Day, business day and any two New Conversion Times for a particular Analog 2W Loop Loops shall differ by at least eight (8) hours, unless otherwise agreed to by the Parties. 3.3.1.5 3.18.1.5 If the New Conversion Time is more than one (1) business hour from the original Scheduled Conversion Time or from the previous New Conversion Time, the Party requesting such New Conversion Time shall be subject to the following: 3.3.1.5.1 3.18.1.5.1 If Verizon requests to reschedule outside of the one (1) hour time frame above, above the Analog 2W Loops Service Order Charge for the original Scheduled Conversion Time or the previous New Conversion Time shall be credited upon request from ATITech Com; and 3.3.1.5.2 3.18.1.5.2 If ATI Tech Com requests to reschedule outside the one (1) hour time frame above, ATI Tech Com shall be charged an additional Analog 2W Loops Service Order Charge for rescheduling the conversion to the New Conversion Time. 3.3.1.6 3.18.1.6 If ATI Tech Com is not ready to accept service at within thirty (30) minutes of the Scheduled Conversion Time or at a New Conversion Time, as applicable, an additional Service Order Charge shall apply. If Verizon is not available or ready to perform the conversion within thirty (30) minutes of the Scheduled Conversion Time or New Conversion Time, as applicable, Verizon and ATI Tech Com will reschedule and, upon request from ATITech Com, Verizon will credit the Analog 2W Loop Service Order Charge for the original Scheduled Conversion Time. 3.3.1.7 3.18.1.7 The standard time interval expected from disconnection of a live Telephone Exchange Service to the connection of the Analog 2W Loops to ATI Tech Com is fifteen (15) minutes per Analog 2W Loop for all orders consisting of twenty (20) Analog 2W Loops or less. Orders involving more than twenty (20) Loops will require a negotiated interval. 3.3.1.8 3.18.1.8 Conversions involving LNP will be completed according to North American Numbering Council (“NANC”) standards, via the regional Number Portability Administration Center (“NPAC”). 3.3.1.9 3.18.1.9 If ATI Tech Com requires Analog 2W Loop conversions outside of the regularly scheduled Verizon RCCC operating hours, such conversions shall be separately negotiated. Additional charges (e.g. overtime labor charges) may apply for desired dates and times outside of regularly scheduled RCCC operating hours.

Conversion of Live Telephone Exchange Service to Analog 2W Loops. 3.3.1 The following coordination procedures shall apply to “live” cutovers of Verizon BA Customers who are converting their Telephone Exchange Services to ATI Global Telephone Exchange Services provisioned over Analog 2W unbundled Local Loops (“Analog 2W Loops”) to be provided by Verizon BA to ATI:Global. 3.3.1.1 Coordinated 11.9.1 Subject to approval by the Commission, coordinated cutover charges shall apply to conversions of live Telephone Exchange Services to Analog 2W Loops. When an outside dispatch is required to perform a conversion, additional charges may apply. If ATI Global does not request a coordinated cutover, Verizon BA will process ATIGlobal’s order as a new installation subject to applicable standard provisioning intervals. 3.3.1.2 ATI 11.9.2 Global shall request Analog 2W Loops for coordinated cutover from Verizon BA by delivering to Verizon BA a valid electronic Local Service Request (“LSR”). Xxxxxxx BA agrees to accept from ATI Global the date and time for the conversion designated on the LSR (“Scheduled Conversion Time”), provided that such designation is within the regularly scheduled operating hours of the Verizon BA Regional CLEC Control Center (“RCCC”) and subject to the availability of VerizonBA’s work force. In the event that XxxxxxxBA’s work force is not available, ATI Global and Verizon BA shall mutually agree on a New Conversion Time, as defined below. ATI Global shall designate the Scheduled Conversion Time subject to Verizon BA standard provisioning intervals as stated in the Verizon BA CLEC Handbook, as may be revised from time to time. Within three two (32) Business Days business days of VerizonBA's receipt of such valid LSR, or as otherwise required by Applicable Law, Verizon BA shall provide ATI Global the scheduled due firm order commitment (“FOC”) date for conversion of by which the Analog 2W Loops covered by such LSRLSR will be converted. 3.3.1.3 ATI 11.9.3 Global shall provide dial tone at the ATI collocation Global Collocation site at least forty-eight (48) hours prior to the Scheduled Conversion Time. 3.3.1.4 11.9.4 Either Party may contact the other Party to negotiate a new Scheduled Conversion Time (the “New Conversion Time”); provided, however, that each Party shall use commercially reasonable efforts to provide four (4) business hours’ advance notice to the other Party of its request for a New Conversion Time. Any Scheduled Conversion Time or New Conversion Time may not be rescheduled more than one one (1) time in a Business Daybusiness day, and any two New Conversion Times for a particular Analog 2W Loop Loops shall differ by at least eight (8) hours, unless otherwise agreed to by the Parties. 3.3.1.5 11.9.4.1 If the New Conversion Time is more than one (1) business hour from the original Scheduled Conversion Time or from the previous New Conversion Time, the Party requesting such New Conversion Time shall be subject to the following: 3.3.1.5.1 (i) If Verizon BA requests to reschedule outside of the one (1) hour time frame above, the Analog 2W Loops Service Order Charge for the original Scheduled Conversion Time or the previous New Conversion Time shall be credited waived upon request from ATIGlobal; and 3.3.1.5.2 (ii) If ATI Global requests to reschedule outside the one (1) hour time frame above, ATI Global shall be charged an additional Analog 2W Loops Service Order Charge for rescheduling the conversion to the New Conversion Time. 3.3.1.6 11.9.5 If ATI Global is not ready to accept service at the Scheduled Conversion Time or at a New Conversion Time, as applicable, an additional Service Order Charge shall apply. If Verizon BA is not available or ready to perform the conversion within thirty (30) minutes of the Scheduled Conversion Time or New Conversion Time, as applicable, Verizon BA and ATI Global will reschedule and, upon request from ATIGlobal, Verizon BA will credit waive the Analog 2W Loop Service Order Charge for the original Scheduled Conversion Time. 3.3.1.7 11.9.6 The standard time interval expected from disconnection of a live Telephone Exchange Service to the connection of the Analog 2W Loops to ATI Global is fifteen (15) minutes per Analog 2W Loop Loops for all orders consisting of twenty (20) Analog 2W Loops or less. Orders involving more than twenty (20) Loops will require a negotiated interval. 3.3.1.8 11.9.7 Conversions involving LNP will be completed according to North American Numbering Council (“NANC”) standards, via the regional Number Portability Administration Center (“NPAC”). 3.3.1.9 11.9.8 If ATI Global requires Analog 2W Loop Loops conversions outside of the regularly scheduled Verizon BA RCCC operating hours, such conversions shall be separately negotiated. Additional charges (e.g. overtime labor charges) may apply for desired dates and times outside of regularly scheduled RCCC operating hours.

Conversion of Live Telephone Exchange Service to Analog 2W Loops. 3.3.1 3.17.1 The following coordination procedures shall apply to “live” cutovers of Verizon Customers who are converting their Telephone Exchange Services to ATI Winn Telecom Telephone Exchange Services provisioned over Analog 2W unbundled Local Loops (“Analog 2W Loops) to be provided by Verizon to ATIWinn Telecom: 3.3.1.1 3.17.1.1 Coordinated cutover charges shall apply to conversions of live Telephone Exchange Services to Analog 2W Loops. When an outside dispatch is required to perform a conversion, additional charges may apply. If ATI Winn Telecom does not request a coordinated cutover, Verizon will process ATIWinn Telecom’s order as a new installation subject to applicable standard provisioning intervals. 3.3.1.2 ATI 3.17.1.2 Winn Telecom shall request Analog 2W Loops for coordinated cutover from Verizon by delivering to Verizon a valid electronic Local Service Request (“LSR”). Xxxxxxx Verizon agrees to accept from ATI Winn Telecom the date and time for the conversion designated on the LSR (“Scheduled Conversion Time”), provided that such designation is within the regularly scheduled operating hours of the Verizon Regional CLEC Control Center (“RCCC”) and subject to the availability of Verizon’s work force. In the event that XxxxxxxVerizon’s work force is not available, ATI Winn Telecom and Verizon shall mutually agree on a New Conversion Time, as defined below. ATI Winn Telecom shall designate the Scheduled Conversion Time subject to Verizon standard provisioning intervals as stated in the Verizon CLEC Handbook, as may be revised from time to time. Within three (3) Business Days of Verizon's receipt of such valid LSR, or as otherwise required by Applicable Law, Verizon shall provide ATI Winn Telecom the scheduled due date for conversion of the Analog 2W Loops covered by such LSR. 3.3.1.3 ATI 3.17.1.3 Winn Telecom shall provide dial tone at the ATI collocation Winn Telecom Collocation site at least forty-eight (48) hours prior to the Scheduled Conversion Time. 3.3.1.4 3.17.1.4 Either Party may contact the other Party to negotiate a new Scheduled Conversion Time (the “New Conversion Time”); provided, however, that each Party shall use commercially reasonable efforts to provide four (4) business hours’ advance notice to the other Party of its request for a New Conversion Time. Any Scheduled Conversion Time or New Conversion Time may not be rescheduled more than one (1) time in a Business Day, and any two New Conversion Times for a particular Analog 2W Loop shall differ by at least eight (8) hours, unless otherwise agreed to by the Parties. 3.3.1.5 3.17.1.5 If the New Conversion Time is more than one (1) business hour from the original Scheduled Conversion Time or from the previous New Conversion Time, the Party requesting such New Conversion Time shall be subject to the following: 3.3.1.5.1 3.17.1.5.1 If Verizon requests to reschedule outside of the one (1) hour time frame above, the Analog 2W Loops Service Order Charge for the original Scheduled Conversion Time or the previous New Conversion Time shall be credited waived upon request from ATIWinn Telecom; and 3.3.1.5.2 3.17.1.5.2 If ATI Winn Telecom requests to reschedule outside the one (1) hour time frame above, ATI Winn Telecom shall be charged an additional Analog 2W Loops Service Order Charge for rescheduling the conversion to the New Conversion Time. 3.3.1.6 3.17.1.6 If ATI Winn Telecom is not ready to accept service at the Scheduled Conversion Time or at a New Conversion Time, as applicable, an additional Service Order Charge shall apply. If Verizon is not available or ready to perform the conversion within thirty (30) minutes of the Scheduled Conversion Time or New Conversion Time, as applicable, Verizon and ATI Winn Telecom will reschedule and, upon request from ATIWinn Telecom, Verizon will credit waive the Analog 2W Loop Service Order Charge for the original Scheduled Conversion Time. 3.3.1.7 3.17.1.7 The standard time interval expected from disconnection of a live Telephone Exchange Service to the connection of the Analog 2W Loops to ATI Winn Telecom is fifteen (15) minutes per Analog 2W Loop for all orders consisting of twenty (20) Analog 2W Loops or less. Orders involving more than twenty (20) Loops will require a negotiated interval. 3.3.1.8 3.17.1.8 Conversions involving LNP will be completed according to North American Numbering Council (“NANC”) standards, via the regional Number Portability Administration Center (“NPAC”). 3.3.1.9 3.17.1.9 If ATI Winn Telecom requires Analog 2W Loop conversions outside of the regularly scheduled Verizon RCCC operating hours, such conversions shall be separately negotiated. Additional charges (e.g. overtime labor charges) may apply for desired dates and times outside of regularly scheduled RCCC operating hours.

Conversion of Live Telephone Exchange Service to Analog 2W Loops. 3.3.1 The following coordination procedures shall apply to “live” cutovers of Verizon Customers who are converting their Telephone Exchange Services to ATI MMG Telephone Exchange Services provisioned over Analog 2W unbundled Local Loops (“Analog 2W Loops) to be provided by Verizon to ATIMMG: 3.3.1.1 Coordinated cutover charges shall apply to conversions of live Telephone Exchange Services to Analog 2W Loops. When an outside dispatch is required to perform a conversion, additional charges may apply. If ATI MMG does not request a coordinated cutover, Verizon will process ATIMMG’s order as a new installation subject to applicable standard provisioning intervals. 3.3.1.2 ATI MMG shall request Analog 2W Loops for coordinated cutover from Verizon by delivering to Verizon a valid electronic Local Service Request (“LSR”). Xxxxxxx Verizon agrees to accept from ATI MMG the date and time for the conversion designated on the LSR (“Scheduled Conversion Time”), provided that such designation is within the regularly scheduled operating hours of the Verizon Regional CLEC Control Center (“RCCC”) and subject to the availability of Verizon’s work force. In the event that XxxxxxxVerizon’s work force is not available, ATI MMG and Verizon shall mutually agree on a New Conversion Time, as defined below. ATI MMG shall designate the Scheduled Conversion Time subject to Verizon standard provisioning intervals as stated in the Verizon CLEC Handbook, as may be revised from time to time. Within three (3) Business Days of Verizon's receipt of such valid LSR, or as otherwise required by Applicable Lawthe Federal Unbundling Rules, Verizon shall provide ATI MMG the scheduled due date for conversion of the Analog 2W Loops covered by such LSR. 3.3.1.3 ATI MMG shall provide dial tone at the ATI MMG collocation site at least forty-eight (48) hours prior to the Scheduled Conversion Time. 3.3.1.4 Either Party may contact the other Party to negotiate a new Scheduled Conversion Time (the “New Conversion Time”); provided, however, that each Party shall use commercially reasonable efforts to provide four (4) business hours’ advance notice to the other Party of its request for a New Conversion Time. Any Scheduled Conversion Time or New Conversion Time may not be rescheduled more than one (1) time in a Business Day, and any two New Conversion Times for a particular Analog 2W Loop shall differ by at least eight (8) hours, unless otherwise agreed to by the Parties. 3.3.1.5 If the New Conversion Time is more than one (1) business hour from the original Scheduled Conversion Time or from the previous New Conversion Time, the Party requesting such New Conversion Time shall be subject to the following: 3.3.1.5.1 If Verizon requests to reschedule outside of the one (1) hour time frame above, the Analog 2W Loops Service Order Charge for the original Scheduled Conversion Time or the previous New Conversion Time shall be credited upon request from ATIMMG; and 3.3.1.5.2 If ATI MMG requests to reschedule outside the one one (1) hour time frame above, ATI MMG shall be charged an additional Analog 2W Loops Service Order Charge for rescheduling the conversion to the New Conversion Time. 3.3.1.6 If ATI MMG is not ready to accept service at the Scheduled Conversion Time or at a New Conversion Time, as applicable, an additional Service Order Charge shall apply. If Verizon is not available or ready to perform the conversion within thirty (30) minutes of the Scheduled Conversion Time or New Conversion Time, as applicable, Verizon and ATI MMG will reschedule and, upon request from ATI, Verizon will credit the Analog 2W Loop Service Order Charge for the original Scheduled Conversion Time. 3.3.1.7 The standard time interval expected from disconnection of a live Telephone Exchange Service to the connection of the Analog 2W Loops to ATI is fifteen (15) minutes per Analog 2W Loop for all orders consisting of twenty (20) Analog 2W Loops or less. Orders involving more than twenty (20) Loops will require a negotiated interval. 3.3.1.8 Conversions involving LNP will be completed according to North American Numbering Council (NANC) standards, via the regional Number Portability Administration Center (NPAC). 3.3.1.9 If ATI requires Analog 2W Loop conversions outside of the regularly scheduled Verizon RCCC operating hours, such conversions shall be separately negotiated. Additional charges (e.g. overtime labor charges) may apply for desired dates and times outside of regularly scheduled RCCC operating hours.from

Conversion of Live Telephone Exchange Service to Analog 2W Loops. 3.3.1 3.17.1 The following coordination procedures shall apply to “live” cutovers of Verizon Customers who are converting their Telephone Exchange Services to ATI GNAPs Telephone Exchange Services provisioned over Analog 2W unbundled Local Loops (“Analog 2W Loops) to be provided by Verizon to ATIGNAPs: 3.3.1.1 3.17.1.1 Coordinated cutover charges shall apply to conversions of live Telephone Exchange Services to Analog 2W Loops. When an outside dispatch is required to perform a conversion, additional charges may apply. If ATI GNAPs does not request a coordinated cutover, Verizon will process ATIGNAPs’s order as a new installation subject to applicable standard provisioning intervals. 3.3.1.2 ATI 3.17.1.2 GNAPs shall request Analog 2W Loops for coordinated cutover from Verizon by delivering to Verizon a valid electronic Local Service Request (“LSR”). Xxxxxxx Verizon agrees to accept from ATI GNAPs the date and time for the conversion designated on the LSR (“Scheduled Conversion Time”), provided that such designation is within the regularly scheduled operating hours of the Verizon Regional CLEC Control Center (“RCCC”) and subject to the availability of Verizon’s work force. In the event that XxxxxxxVerizon’s work force is not available, ATI GNAPs and Verizon shall mutually agree on a New Conversion Time, as defined below. ATI GNAPs shall designate the Scheduled Conversion Time subject to Verizon standard provisioning intervals as stated in the Verizon CLEC Handbook, as may be revised from time to time. Within W ithin three (3) Business Days of Verizon's receipt of such valid LSR, or as otherwise required by Applicable Law, Verizon shall provide ATI GNAPs the scheduled due date for conversion of the Analog 2W Loops covered by such LSR. 3.3.1.3 ATI 3.17.1.3 GNAPs shall provide dial tone at the ATI collocation GNAPs Collocation site at least forty-eight (48) hours prior to the Scheduled Conversion Time. 3.3.1.4 3.17.1.4 Either Party may contact the other Party to negotiate a new Scheduled Conversion Time (the “New Conversion Time”); provided, however, that each Party shall use commercially reasonable efforts to provide four (4) business hours’ advance notice to the other Party of its request for a New Conversion Time. Any Scheduled Conversion Time or New Conversion Time may not be rescheduled more than one (1) time in a Business Daybusiness day, and any two New Conversion Times for a particular Analog 2W Loop shall differ by at least eight (8) hours, unless otherwise agreed to by the Parties. 3.3.1.5 3.17.1.5 If the New Conversion Time is more than one (1) business hour from the original Scheduled Conversion Time or from the previous New Conversion Time, the Party requesting such New Conversion Time shall be subject to the following: 3.3.1.5.1 3.17.1.5.1 If Verizon requests to reschedule outside of the one (1) hour time frame above, the Analog 2W Loops Service Order Charge for the original Scheduled Conversion Time or the previous New Conversion Time shall be credited waived upon request from ATIGNAPs; and 3.3.1.5.2 3.17.1.5.2 If ATI GNAPs requests to reschedule outside the one (1) hour time frame above, ATI GNAPs shall be charged an additional Analog 2W Loops Service Order Charge for rescheduling the conversion to the New Conversion Time. 3.3.1.6 3.17.1.6 If ATI GNAPs is not ready to accept service at the Scheduled Conversion Time or at a New Conversion Time, as applicable, an additional Service Order Charge shall apply. If Verizon is not available or ready to perform the conversion within thirty (30) minutes of the Scheduled Conversion Time or New Conversion Time, as applicable, Verizon and ATI GNAPs will reschedule and, upon request from ATIGNAPs, Verizon will credit waive the Analog 2W Loop Service Order Charge for the original Scheduled Conversion Time. 3.3.1.7 3.17.1.7 The standard time interval expected from disconnection of a live Telephone Exchange Service to the connection of the Analog 2W Loops to ATI GNAPs is fifteen (15) minutes per Analog 2W Loop for all orders consisting of twenty (20) Analog 2W Loops or less. Orders involving more than twenty (20) Loops will require a negotiated interval. 3.3.1.8 3.17.1.8 Conversions involving LNP will be completed according to North American Numbering Council (“NANC”) standards, via the regional Number Portability Administration Center (“NPAC”). 3.3.1.9 3.17.1.9 If ATI GNAPs requires Analog 2W Loop conversions outside of the regularly scheduled Verizon RCCC operating hours, such conversions shall be separately negotiated. Additional charges (e.g. overtime labor charges) may apply for desired dates and times outside of regularly scheduled RCCC operating hours.

Conversion of Live Telephone Exchange Service to Analog 2W Loops. 3.3.1 3.17.1 The following coordination procedures shall apply to “live” cutovers of Verizon Customers who are converting their Telephone Exchange Services to ATI Winco Telephone Exchange Services provisioned over Analog 2W unbundled Local Loops (“Analog 2W Loops) to be provided by Verizon to ATIWinco: 3.3.1.1 3.17.1.1 Coordinated cutover charges shall apply to conversions of live Telephone Exchange Services to Analog 2W Loops. When an outside dispatch is required to perform a conversion, additional charges may apply. If ATI Winco does not request a coordinated cutover, Verizon will process ATIWinco’s order as a new installation subject to applicable standard provisioning intervals. 3.3.1.2 ATI 3.17.1.2 Winco shall request Analog 2W Loops for coordinated cutover from Verizon by delivering to Verizon a valid electronic Local Service Request (“LSR”). Xxxxxxx Verizon agrees to accept from ATI Winco the date and time for the conversion designated on the LSR (“Scheduled Conversion Time”), provided that such designation is within the regularly scheduled operating hours of the Verizon Regional CLEC Control Center (“RCCC”) and subject to the availability of Verizon’s work force. In the event that XxxxxxxVerizon’s work force is not available, ATI Winco and Verizon shall mutually agree on a New Conversion Time, as defined below. ATI Winco shall designate the Scheduled Conversion Time subject to Verizon standard provisioning intervals as stated in the Verizon CLEC Handbook, as may be revised from time to time. Within three (3) Business Days of Verizon's receipt of such valid LSR, or as otherwise required by Applicable Law, Verizon shall provide ATI Winco the scheduled due date for conversion of the Analog 2W Loops covered by such LSR. 3.3.1.3 ATI 3.17.1.3 Winco shall provide dial tone at the ATI collocation Winco Collocation site at least forty-eight (48) hours prior to the Scheduled Conversion Time. 3.3.1.4 3.17.1.4 Either Party may contact the other Party to negotiate a new Scheduled Conversion Time (the “New Conversion Time”); provided, however, that each Party shall use commercially reasonable efforts to provide four (4) business hours’ advance notice to the other Party of its request for a New Conversion Time. Any Scheduled Conversion Time or New Conversion Time may not be rescheduled more than one (1) time in a Business Daybusiness day, and any two New Conversion Times for a particular Analog 2W Loop shall differ by at least eight (8) hours, unless otherwise agreed to by the Parties. 3.3.1.5 3.17.1.5 If the New Conversion Time is more than one (1) business hour from the original Scheduled Conversion Time or from the previous New Conversion Time, the Party requesting such New Conversion Time shall be subject to the following: 3.3.1.5.1 3.17.1.5.1 If Verizon requests to reschedule outside of the one (1) hour time frame above, the Analog 2W Loops Service Order Charge for the original Scheduled Conversion Time or the previous New Conversion Time shall be credited waived upon request from ATIWinco; and 3.3.1.5.2 3.17.1.5.2 If ATI Winco requests to reschedule outside the one one (1) hour time frame above, ATI Winco shall be charged an additional Analog 2W Loops Service Order Charge for rescheduling the conversion to the New Conversion Time. 3.3.1.6 3.17.1.6 If ATI Winco is not ready to accept service at the Scheduled Conversion Time or at a New Conversion Time, as applicable, an additional Service Order Charge shall apply. If Verizon is not available or ready to perform the conversion within thirty (30) minutes of the Scheduled Conversion Time or New Conversion Time, as applicable, Verizon and ATI Winco will reschedule and, upon request from ATIWinco, Verizon will credit waive the Analog 2W Loop Service Order Charge for the original Scheduled Conversion Time. 3.3.1.7 3.17.1.7 The standard time interval expected from disconnection of a live Telephone Exchange Service to the connection of the Analog 2W Loops to ATI Winco is fifteen (15) minutes per Analog 2W Loop for all orders consisting of twenty (20) Analog 2W Loops or less. Orders involving more than twenty (20) Loops will require a negotiated interval. 3.3.1.8 3.17.1.8 Conversions involving LNP will be completed according to North American Numbering Council (“NANC”) standards, via the regional Number Portability Administration Center (“NPAC”). 3.3.1.9 3.17.1.9 If ATI Winco requires Analog 2W Loop conversions outside of the regularly scheduled Verizon RCCC operating hours, such conversions shall be separately negotiated. Additional charges (e.g. overtime labor charges) may apply for desired dates and times outside of regularly scheduled RCCC operating hours.

Conversion of Live Telephone Exchange Service to Analog 2W Loops. 3.3.1 The following coordination procedures shall apply to “live” cutovers of Verizon BA Customers who are converting their Telephone Exchange Services to ATI Mpower Telephone Exchange Services provisioned over Analog 2W unbundled Local Loops (“Analog 2W LoopsLoop”s) to be provided by Verizon BA to ATI:Mpower. 3.3.1.1 Coordinated 11.9.1 Subject to approval by the Commission, coordinated cutover charges shall apply to conversions of live Telephone Exchange Services to Analog 2W Loops. When an outside dispatch is required to perform a conversion, additional charges may apply. If ATI Mpower does not request a coordinated cutover, Verizon BA will process ATIMpower’s order as a new installation subject to applicable standard provisioning intervals. 3.3.1.2 ATI 11.9.2 Mpower shall request Analog 2W Loops for coordinated cutover from Verizon BA by delivering to Verizon BA a valid electronic Local Service Request (“LSR”). Xxxxxxx BA agrees to accept from ATI Mpower the date and time for the conversion designated on the LSR (“Scheduled Conversion Time”), provided that such designation is within the regularly scheduled operating hours of the Verizon BA Regional CLEC Control Center (“RCCC”) and subject to the availability of VerizonBA’s work force. In the event that XxxxxxxBA’s work force is not available, ATI Mpower and Verizon BA shall mutually agree on a New Conversion Time, as defined below. ATI Mpower shall designate the Scheduled Conversion Time subject to Verizon BA standard provisioning intervals as stated in the Verizon BA CLEC Handbook, as may be revised from time to time. Within three two (32) Business Days business days of VerizonBA's receipt of such valid LSR, or as otherwise required by Applicable Law, Verizon BA shall provide ATI Mpower the scheduled due firm order commitment (“FOC”) date for conversion of by which the Analog 2W Loops covered by such LSRLSR will be converted. 3.3.1.3 ATI 11.9.3 Mpower shall provide dial tone at the ATI collocation Mpower Collocation site at least forty-eight (48) hours prior to the Scheduled Conversion Time. 3.3.1.4 11.9.4 Either Party may contact the other Party to negotiate a new Scheduled Conversion Time (the “New Conversion Time”); provided, however, that each Party shall use commercially reasonable efforts to provide four (4) business hours’ advance notice to the other Party of its request for a New Conversion Time. Any Scheduled Conversion Time or New Conversion Time may not be rescheduled more than one one (1) time in a Business Daybusiness day, and any two New Conversion Times for a particular Analog 2W Loop Loops shall differ by at least eight (8) hours, unless otherwise agreed to by the Parties. 3.3.1.5 11.9.4.1 If the New Conversion Time is more than one (1) business hour from the original Scheduled Conversion Time or from the previous New Conversion Time, the Party requesting such New Conversion Time shall be subject to the following: 3.3.1.5.1 (i) If Verizon BA requests to reschedule outside of the one (1) hour time frame above, the Analog 2W Loops Service Order Charge for the original Scheduled Conversion Time or the previous New Conversion Time shall be credited waived upon request from ATIMpower; and 3.3.1.5.2 (ii) If ATI Mpower requests to reschedule outside the one (1) hour time frame above, ATI Mpower shall be charged an additional Analog 2W Loops Service Order Charge for rescheduling the conversion to the New Conversion Time. 3.3.1.6 11.9.5 If ATI Mpower is not ready to accept service at the Scheduled Conversion Time or at a New Conversion Time, as applicable, an additional Service Order Charge shall apply. If Verizon BA is not available or ready to perform the conversion within thirty (30) minutes of the Scheduled Conversion Time or New Conversion Time, as applicable, Verizon BA and ATI Mpower will reschedule and, upon request from ATIMpower, Verizon BA will credit waive the Analog 2W Loop Service Order Charge for the original Scheduled Conversion Time. 3.3.1.7 11.9.6 The standard time interval expected from disconnection of a live Telephone Exchange Service to the connection of the Analog 2W Loops to ATI Mpower is fifteen (15) minutes per Analog 2W Loop Loops for all orders consisting of twenty (20) Analog 2W Loops or less. Orders involving more than twenty (20) Loops will require a negotiated interval. 3.3.1.8 11.9.7 Conversions involving LNP will be completed according to North American Numbering Council (“NANC”) standards, via the regional Number Portability Administration Center (“NPAC”). 3.3.1.9 11.9.8 If ATI Mpower requires Analog 2W Loop Loops conversions outside of the regularly scheduled Verizon BA RCCC operating hours, such conversions shall be separately negotiated. Additional charges (e.g. overtime labor charges) may apply for desired dates and times outside of regularly scheduled RCCC operating hours.

Conversion of Live Telephone Exchange Service to Analog 2W Loops. 3.3.1 3.17.1 The following coordination procedures shall apply to “live” cutovers of Verizon Customers who are converting their Telephone Exchange Services to ATI Best Telephone Exchange Services provisioned over Analog 2W unbundled Local Loops (“Analog 2W Loops) to be provided by Verizon to ATIBest: 3.3.1.1 3.17.1.1 Coordinated cutover charges shall apply to conversions of live Telephone Exchange Services to Analog 2W Loops. When an outside dispatch is required to perform a conversion, additional charges may apply. If ATI Best does not request a coordinated cutover, Verizon will process ATIBest’s order as a new installation subject to applicable standard provisioning intervals. 3.3.1.2 ATI 3.17.1.2 Best shall request Analog 2W Loops for coordinated cutover from Verizon by delivering to Verizon a valid electronic Local Service Request (“LSR”). Xxxxxxx Verizon agrees to accept from ATI Best the date and time for the conversion designated on the LSR (“Scheduled Conversion Time”), provided that such designation is within the regularly scheduled operating hours of the Verizon Regional CLEC Control Center (“RCCC”) and subject to the availability of Verizon’s work force. In the event that XxxxxxxVerizon’s work force is not available, ATI Best and Verizon shall mutually agree on a New Conversion Time, as defined below. ATI Best shall designate the Scheduled Conversion Time subject to Verizon standard provisioning intervals as stated in the Verizon CLEC Handbook, as may be revised from time to time. Within three (3) Business Days business days of Verizon's receipt of such valid LSR, or as otherwise required by Applicable Law, Verizon shall provide ATI Best the scheduled due date for conversion of the Analog 2W Loops covered by such LSR. 3.3.1.3 ATI 3.17.1.3 Best shall provide dial tone at the ATI collocation Best Collocation site at least forty-eight (48) hours prior to the Scheduled Conversion Time. 3.3.1.4 3.17.1.4 Either Party may contact the other Party to negotiate a new Scheduled Conversion Time (the “New Conversion Time”); provided, however, that each Party shall use commercially reasonable efforts to provide four (4) business hours’ advance notice to the other Party of its request for a New Conversion Time. Any Scheduled Conversion Time or New Conversion Time may not be rescheduled more than one one (1) time in a Business Daybusiness day, and any two New Conversion Times for a particular Analog 2W Loop Loops shall differ by at least eight (8) hours, unless otherwise agreed to by the Parties. 3.3.1.5 3.17.1.5 If the New Conversion Time is more than one (1) business hour from the original Scheduled Conversion Time or from the previous New Conversion Time, the Party requesting such New Conversion Time shall be subject to the following: 3.3.1.5.1 3.17.1.5.1 If Verizon requests to reschedule outside of the one (1) hour time frame above, the Analog 2W Loops Service Order Charge for the original Scheduled Conversion Time or the previous New Conversion Time shall be credited waived upon request from ATIBest; and 3.3.1.5.2 3.17.1.5.2 If ATI Best requests to reschedule outside the one (1) hour time frame above, ATI Best shall be charged an additional Analog 2W Loops Service Order Charge for rescheduling the conversion to the New Conversion Time. 3.3.1.6 3.17.1.6 If ATI Best is not ready to accept service at the Scheduled Conversion Time or at a New Conversion Time, as applicable, an additional Service Order Charge shall apply. If Verizon is not available or ready to perform the conversion within thirty (30) minutes of the Scheduled Conversion Time or New Conversion Time, as applicable, Verizon and ATI will reschedule and, upon request from ATI, Verizon will credit the Analog 2W Loop Service Order Charge for the original Scheduled Conversion Time. 3.3.1.7 The standard time interval expected from disconnection of a live Telephone Exchange Service to the connection of the Analog 2W Loops to ATI is fifteen (15) minutes per Analog 2W Loop for all orders consisting of twenty (20) Analog 2W Loops or less. Orders involving more than twenty (20) Loops will require a negotiated interval. 3.3.1.8 Conversions involving LNP will be completed according to North American Numbering Council (NANC) standards, via the regional Number Portability Administration Center (NPAC). 3.3.1.9 If ATI requires Analog 2W Loop conversions outside of the regularly scheduled Verizon RCCC operating hours, such conversions shall be separately negotiated. Additional charges (e.g. overtime labor charges) may apply for desired dates and times outside of regularly scheduled RCCC operating hours.thirty

Conversion of Live Telephone Exchange Service to Analog 2W Loops. 3.3.1 The following coordination procedures shall apply to “live” cutovers of Verizon Customers who are converting their Telephone Exchange Services to ATI BullsEye Telephone Exchange Services provisioned over Analog 2W unbundled Local Loops (“Analog 2W Loops) to be provided by Verizon to ATIBullsEye: 3.3.1.1 Coordinated cutover charges shall apply to conversions of live Telephone Exchange Services to Analog 2W Loops. When an outside dispatch is required to perform a conversion, additional charges may apply. If ATI BullsEye does not request a coordinated cutover, Verizon will process ATIBullsEye’s order as a new installation subject to applicable standard provisioning intervals. 3.3.1.2 ATI BullsEye shall request Analog 2W Loops for coordinated cutover from Verizon by delivering to Verizon a valid electronic Local Service Request (“LSR”). Xxxxxxx Verizon agrees to accept from ATI BullsEye the date and time for the conversion designated on the LSR (“Scheduled Conversion Time”), provided that such designation is within the regularly scheduled operating hours of the Verizon Regional CLEC Control Center (“RCCC”) and subject to the availability of Verizon’s work force. In the event that XxxxxxxVerizon’s work force is not available, ATI BullsEye and Verizon shall mutually agree on a New Conversion Time, as defined below. ATI BullsEye shall designate the Scheduled Conversion Time subject to Verizon standard provisioning intervals as stated in the Verizon CLEC Handbook, as may be revised from time to time. Within three (3) Business Days of Verizon's receipt of such valid LSR, or as otherwise required by Applicable Law, Verizon shall provide ATI BullsEye the scheduled due date for conversion of the Analog 2W Loops covered by such LSR. 3.3.1.3 ATI BullsEye shall provide dial tone at the ATI collocation BullsEye Collocation site at least forty-eight (48) hours prior to the Scheduled Conversion Time. 3.3.1.4 Either Party may contact the other Party to negotiate a new Scheduled Conversion Time (the “New Conversion Time”); provided, however, that each Party shall use commercially reasonable efforts to provide four (4) business hours’ advance notice to the other Party of its request for a New Conversion Time. Any Scheduled Conversion Time or New Conversion Time may not be rescheduled more than one (1) time in a Business Day, and any two New Conversion Times for a particular Analog 2W Loop shall differ by at least eight (8) hours, unless otherwise agreed to by the Parties. 3.3.1.5 If the New Conversion Time is more than one (1) business hour from the original Scheduled Conversion Time or from the previous New Conversion Time, the Party requesting such New Conversion Time shall be subject to the following: 3.3.1.5.1 If Verizon requests to reschedule outside of the one (1) hour time frame above, the Analog 2W Loops Service Order Charge for the original Scheduled Conversion Time or the previous New Conversion Time shall be credited upon request from ATIBullsEye; and 3.3.1.5.2 If ATI BullsEye requests to reschedule outside the one (1) hour time frame above, ATI BullsEye shall be charged an additional Analog 2W Loops Service Order Charge for rescheduling the conversion to the New Conversion Time. 3.3.1.6 If ATI BullsEye is not ready to accept service at the Scheduled Conversion Time or at a New Conversion Time, as applicable, an additional Service Order Charge shall apply. If Verizon is not available or ready to perform the conversion within thirty (30) minutes of the Scheduled Conversion Time or New Conversion Time, as applicable, Verizon and ATI BullsEye will reschedule and, upon request from ATIBullsEye, Verizon will credit the Analog 2W Loop Service Order Charge for the original Scheduled Conversion Time. 3.3.1.7 The standard time interval expected from disconnection of a live Telephone Exchange Service to the connection of the Analog 2W Loops to ATI BullsEye is fifteen (15) minutes per Analog 2W Loop for all orders consisting of twenty (20) Analog 2W Loops or less. Orders involving more than twenty (20) Loops will require a negotiated interval. 3.3.1.8 Conversions involving LNP will be completed according to North American Numbering Council (NANC) standards, via the regional Number Portability Administration Center (NPAC). 3.3.1.9 If ATI BullsEye requires Analog 2W Loop conversions outside of the regularly scheduled Verizon RCCC operating hours, such conversions shall be separately negotiated. Additional charges (e.g. overtime labor charges) may apply for desired dates and times outside of regularly scheduled RCCC operating hours.

Conversion of Live Telephone Exchange Service to Analog 2W Loops. 3.3.1 3.17.1 The following coordination procedures shall apply to “live” cutovers of Verizon Customers who are converting their Telephone Exchange Services to ATI RACC Telephone Exchange Services provisioned over Analog 2W unbundled Local Loops (“Analog 2W Loops) to be provided by Verizon to ATIRACC: 3.3.1.1 3.17.1.1 Coordinated cutover charges shall apply to conversions of live Telephone Exchange Services to Analog 2W Loops. When an outside dispatch is required to perform a conversion, additional charges may apply. If ATI RACC does not request a coordinated cutover, Verizon will process ATIRACC’s order as a new installation subject to applicable standard provisioning intervals. 3.3.1.2 ATI 3.17.1.2 RACC shall request Analog 2W Loops for coordinated cutover from Verizon by delivering to Verizon a valid electronic Local Service Request (“LSR”). Xxxxxxx Verizon agrees to accept from ATI RACC the date and time for the conversion designated on the LSR (“Scheduled Conversion Time”), provided that such designation is within the regularly scheduled operating hours of the Verizon Regional CLEC Control Center (“RCCC”) and subject to the availability of Verizon’s work force. In the event that XxxxxxxVerizon’s work force is not available, ATI RACC and Verizon shall mutually agree on a New Conversion Time, as defined below. ATI RACC shall designate the Scheduled Conversion Time subject to Verizon standard provisioning intervals as stated in the Verizon CLEC Handbook, as may be revised from time to time. Within three (3) Business Days of Verizon's receipt of such valid LSR, or as otherwise required by Applicable Law, Verizon shall provide ATI RACC the scheduled due date for conversion of the Analog 2W Loops covered by such LSR. 3.3.1.3 ATI 3.17.1.3 RACC shall provide dial tone at the ATI collocation RACC Collocation site at least forty-eight (48) hours prior to the Scheduled Conversion Time. 3.3.1.4 3.17.1.4 Either Party may contact the other Party to negotiate a new Scheduled Conversion Time (the “New Conversion Time”); provided, however, that each Party shall use commercially reasonable efforts to provide four (4) business hours’ advance notice to the other Party of its request for a New Conversion Time. Any Scheduled Conversion Time or New Conversion Time may not be rescheduled more than one (1) time in a Business Daybusiness day, and any two New Conversion Times for a particular Analog 2W Loop shall differ by at least eight (8) hours, unless otherwise agreed to by the Parties. 3.3.1.5 3.17.1.5 If the New Conversion Time is more than one (1) business hour from the original Scheduled Conversion Time or from the previous New Conversion Time, the Party requesting such New Conversion Time shall be subject to the following: 3.3.1.5.1 3.17.1.5.1 If Verizon requests to reschedule outside of the one (1) hour time frame above, the Analog 2W Loops Service Order Charge for the original Scheduled Conversion Time or the previous New Conversion Time shall be credited waived upon request from ATIRACC; and 3.3.1.5.2 3.17.1.5.2 If ATI RACC requests to reschedule outside the one one (1) hour time frame above, ATI RACC shall be charged an additional Analog 2W Loops Service Order Charge for rescheduling the conversion to the New Conversion Time. 3.3.1.6 3.17.1.6 If ATI RACC is not ready to accept service at the Scheduled Conversion Time or at a New Conversion Time, as applicable, an additional Service Order Charge shall apply. If Verizon is not available or ready to perform the conversion within thirty (30) minutes of the Scheduled Conversion Time or New Conversion Time, as applicable, Verizon and ATI RACC will reschedule and, upon request from ATIRACC, Verizon will credit waive the Analog 2W Loop Service Order Charge for the original Scheduled Conversion Time. 3.3.1.7 3.17.1.7 The standard time interval expected from disconnection of a live Telephone Exchange Service to the connection of the Analog 2W Loops to ATI RACC is fifteen (15) minutes per Analog 2W Loop for all orders consisting of twenty (20) Analog 2W Loops or less. Orders involving more than twenty (20) Loops will require a negotiated interval. 3.3.1.8 3.17.1.8 Conversions involving LNP will be completed according to North American Numbering Council (“NANC”) standards, via the regional Number Portability Administration Center (“NPAC”). 3.3.1.9 3.17.1.9 If ATI RACC requires Analog 2W Loop conversions outside of the regularly scheduled Verizon RCCC operating hours, such conversions shall be separately negotiated. Additional charges (e.g. overtime labor charges) may apply for desired dates and times outside of regularly scheduled RCCC operating hours.

Conversion of Live Telephone Exchange Service to Analog 2W Loops. 3.3.1 The following coordination procedures shall apply to “live” cutovers of Verizon Customers who are converting their Telephone Exchange Services to ATI Navtel Telephone Exchange Services provisioned over Analog 2W unbundled Local Loops (“Analog 2W Loops) to be provided by Verizon to ATINavtel: 3.3.1.1 Coordinated cutover charges shall apply to conversions of live Telephone Exchange Services to Analog 2W Loops. When an outside dispatch is required to perform a conversion, additional charges may apply. If ATI Navtel does not request a coordinated cutover, Verizon will process ATINavtel’s order as a new installation subject to applicable standard provisioning intervals. 3.3.1.2 ATI Navtel shall request Analog 2W Loops for coordinated cutover from Verizon by delivering to Verizon a valid electronic Local Service Request (“LSR”). Xxxxxxx agrees to accept from ATI Navtel the date and time for the conversion designated on the LSR (“Scheduled Conversion Time”), provided that such designation is within the regularly scheduled operating hours of the Verizon Regional CLEC Control Center (“RCCC”) and subject to the availability of Verizon’s work force. In the event that Xxxxxxx’s work force is not available, ATI Navtel and Verizon shall mutually agree on a New Conversion Time, as defined below. ATI Navtel shall designate the Scheduled Conversion Time subject to Verizon standard provisioning intervals as stated in the Verizon CLEC Handbook, as may be revised from time to time. Within three (3) Business Days of Verizon's receipt of such valid LSR, or as otherwise required by Applicable Law, Verizon shall provide ATI Navtel the scheduled due date for conversion of the Analog 2W Loops covered by such LSR. 3.3.1.3 ATI Navtel shall provide dial tone at the ATI Navtel collocation site at least forty-eight (48) hours prior to the Scheduled Conversion Time. 3.3.1.4 Either Party may contact the other Party to negotiate a new Scheduled Conversion Time (the “New Conversion Time”); provided, however, that each Party shall use commercially reasonable efforts to provide four (4) business hours’ advance notice to the other Party of its request for a New Conversion Time. Any Scheduled Conversion Time or New Conversion Time may not be rescheduled more than one (1) time in a Business Day, and any two New Conversion Times for a particular Analog 2W Loop shall differ by at least eight (8) hours, unless otherwise agreed to by the Parties. 3.3.1.5 If the New Conversion Time is more than one (1) business hour from the original Scheduled Conversion Time or from the previous New Conversion Time, the Party requesting such New Conversion Time shall be subject to the following: 3.3.1.5.1 If Verizon requests to reschedule outside of the one (1) hour time frame above, the Analog 2W Loops Service Order Charge for the original Scheduled Conversion Time or the previous New Conversion Time shall be credited upon request from ATINavtel; and 3.3.1.5.2 If ATI Navtel requests to reschedule outside the one one (1) hour time frame above, ATI Navtel shall be charged an additional Analog 2W Loops Service Order Charge for rescheduling the conversion to the New Conversion Time. 3.3.1.6 If ATI Navtel is not ready to accept service at the Scheduled Conversion Time or at a New Conversion Time, as applicable, an additional Service Order Charge shall apply. If Verizon is not available or ready to perform the conversion within thirty (30) minutes of the Scheduled Conversion Time or New Conversion Time, as applicable, Verizon and ATI Navtel will reschedule and, upon request from ATINavtel, Verizon will credit the Analog 2W Loop Service Order Charge for the original Scheduled Conversion Time. 3.3.1.7 The standard time interval expected from disconnection of a live Telephone Exchange Service to the connection of the Analog 2W Loops to ATI Navtel is fifteen (15) minutes per Analog 2W Loop for all orders consisting of twenty (20) Analog 2W Loops or less. Orders involving more than twenty (20) Loops will require a negotiated interval. 3.3.1.8 Conversions involving LNP will be completed according to North American Numbering Council (NANC) standards, via the regional Number Portability Administration Center (NPAC). 3.3.1.9 If ATI Navtel requires Analog 2W Loop conversions outside of the regularly scheduled Verizon RCCC operating hours, such conversions shall be separately negotiated. Additional charges (e.g. overtime labor charges) may apply for desired dates and times outside of regularly scheduled RCCC operating hours.

Conversion of Live Telephone Exchange Service to Analog 2W Loops. 3.3.1 The following coordination procedures shall apply to “live” cutovers of Verizon Customers who are converting their Telephone Exchange Services to ATI CTT Telephone Exchange Services provisioned over Analog 2W unbundled Local Loops (“Analog 2W Loops) to be provided by Verizon to ATICTT: 3.3.1.1 Coordinated cutover charges shall apply to conversions of live Telephone Exchange Services to Analog 2W Loops. When an outside dispatch is required to perform a conversion, additional charges may apply. If ATI CTT does not request a coordinated cutover, Verizon will process ATICTT’s order as a new installation subject to applicable standard provisioning intervals. 3.3.1.2 ATI CTT shall request Analog 2W Loops for coordinated cutover from Verizon by delivering to Verizon a valid electronic Local Service Request (“LSR”). Xxxxxxx Verizon agrees to accept from ATI CTT the date and time for the conversion designated on the LSR (“Scheduled Conversion Time”), provided that such designation is within the regularly scheduled operating hours of the Verizon Regional CLEC Control Center (“RCCC”) and subject to the availability of Verizon’s work force. In the event that XxxxxxxVerizon’s work force is not available, ATI CTT and Verizon shall mutually agree on a New Conversion Time, as defined below. ATI CTT shall designate the Scheduled Conversion Time subject to Verizon standard provisioning intervals as stated in the Verizon CLEC Handbook, as may be revised from time to time. Within three (3) Business Days of Verizon's receipt of such valid LSR, or as otherwise required by Applicable Law, Verizon shall provide ATI CTT the scheduled due date for conversion of the Analog 2W Loops covered by such LSR. 3.3.1.3 ATI CTT shall provide dial tone at the ATI CTT collocation site at least forty-eight (48) hours prior to the Scheduled Conversion Time. 3.3.1.4 Either Party may contact the other Party to negotiate a new Scheduled Conversion Time (the “New Conversion Time”); provided, however, that each Party shall use commercially reasonable efforts to provide four (4) business hours’ advance notice to the other Party of its request for a New Conversion Time. Any Scheduled Conversion Time or New Conversion Time may not be rescheduled more than one (1) time in a Business Day, and any two New Conversion Times for a particular Analog 2W Loop shall differ by at least eight (8) hours, unless otherwise agreed to by the Parties. 3.3.1.5 If the New Conversion Time is more than one (1) business hour from the original Scheduled Conversion Time or from the previous New Conversion Time, the Party requesting such New Conversion Time shall be subject to the following: 3.3.1.5.1 If Verizon requests to reschedule outside of the one (1) hour time frame above, the Analog 2W Loops Service Order Charge for the original Scheduled Conversion Time or the previous New Conversion Time shall be credited upon request from ATICTT; and 3.3.1.5.2 If ATI CTT requests to reschedule outside the one one (1) hour time frame above, ATI CTT shall be charged an additional Analog 2W Loops Service Order Charge for rescheduling the conversion to the New Conversion Time. 3.3.1.6 If ATI CTT is not ready to accept service at the Scheduled Conversion Time or at a New Conversion Time, as applicable, an additional Service Order Charge shall apply. If Verizon is not available or ready to perform the conversion within thirty (30) minutes of the Scheduled Conversion Time or New Conversion Time, as applicable, Verizon and ATI CTT will reschedule and, upon request from ATICTT, Verizon will credit the Analog 2W Loop Service Order Charge for the original Scheduled Conversion Time. 3.3.1.7 The standard time interval expected from disconnection of a live Telephone Exchange Service to the connection of the Analog 2W Loops to ATI CTT is fifteen (15) minutes per Analog 2W Loop for all orders consisting of twenty (20) Analog 2W Loops or less. Orders involving more than twenty (20) Loops will require a negotiated interval. 3.3.1.8 Conversions involving LNP will be completed according to North American Numbering Council (NANC) standards, via the regional Number Portability Administration Center (NPAC). 3.3.1.9 If ATI CTT requires Analog 2W Loop conversions outside of the regularly scheduled Verizon RCCC operating hours, such conversions shall be separately negotiated. Additional charges (e.g. overtime labor charges) may apply for desired dates and times outside of regularly scheduled RCCC operating hours.

Conversion of Live Telephone Exchange Service to Analog 2W Loops. 3.3.1 3.17.1 The following coordination procedures shall apply to “live” cutovers of Verizon Customers who are converting their Telephone Exchange Services to ATI RVP Telephone Exchange Services provisioned over Analog 2W unbundled Local Loops (“Analog 2W Loops) to be provided by Verizon to ATIRVP: 3.3.1.1 3.17.1.1 Coordinated cutover charges shall apply to conversions of live Telephone Exchange Services to Analog 2W Loops. When an outside dispatch is required to perform a conversion, additional charges may apply. If ATI RVP does not request a coordinated cutover, Verizon will process ATIRVP’s order as a new installation subject to applicable standard provisioning intervals. 3.3.1.2 ATI 3.17.1.2 RVP shall request Analog 2W Loops for coordinated cutover from Verizon by delivering to Verizon a valid electronic Local Service Request (“LSR”). Xxxxxxx Verizon agrees to accept from ATI RVP the date and time for the conversion designated on the LSR (“Scheduled Conversion Time”), provided that such designation is within the regularly scheduled operating hours of the Verizon Regional CLEC Control Center (“RCCC”) and subject to the availability of Verizon’s work force. In the event that XxxxxxxVerizon’s work force is not available, ATI RVP and Verizon shall mutually agree on a New Conversion Time, as defined below. ATI RVP shall designate the Scheduled Conversion Time subject to Verizon standard provisioning intervals as stated in the Verizon CLEC Handbook, as may be revised from time to time. Within three (3) Business Days of Verizon's receipt of such valid LSR, or as otherwise required by Applicable Law, Verizon shall provide ATI RVP the scheduled due date for conversion of the Analog 2W Loops covered by such LSR. 3.3.1.3 ATI 3.17.1.3 RVP shall provide dial tone at the ATI collocation RVP Collocation site at least forty-eight (48) hours prior to the Scheduled Conversion Time. 3.3.1.4 3.17.1.4 Either Party may contact the other Party to negotiate a new Scheduled Conversion Time (the “New Conversion Time”); provided, however, that each Party shall use commercially reasonable efforts to provide four (4) business hours’ advance notice to the other Party of its request for a New Conversion Time. Any Scheduled Conversion Time or New Conversion Time may not be rescheduled more than one (1) time in a Business Day, and any two New Conversion Times for a particular Analog 2W Loop shall differ by at least eight (8) hours, unless otherwise agreed to by the Parties. 3.3.1.5 3.17.1.5 If the New Conversion Time is more than one (1) business hour from the original Scheduled Conversion Time or from the previous New Conversion Time, the Party requesting such New Conversion Time shall be subject to the following: 3.3.1.5.1 3.17.1.5.1 If Verizon requests to reschedule outside of the one (1) hour time frame above, the Analog 2W Loops Service Order Charge for the original Scheduled Conversion Time or the previous New Conversion Time shall be credited waived upon request from ATIRVP; and 3.3.1.5.2 3.17.1.5.2 If ATI RVP requests to reschedule outside the one one (1) hour time frame above, ATI RVP shall be charged an additional Analog 2W Loops Service Order Charge for rescheduling the conversion to the New Conversion Time. 3.3.1.6 3.17.1.6 If ATI RVP is not ready to accept service at the Scheduled Conversion Time or at a New Conversion Time, as applicable, an additional Service Order Charge shall apply. If Verizon is not available or ready to perform the conversion within thirty (30) minutes of the Scheduled Conversion Time or New Conversion Time, as applicable, Verizon and ATI RVP will reschedule and, upon request from ATIRVP, Verizon will credit waive the Analog 2W Loop Service Order Charge for the original Scheduled Conversion Time. 3.3.1.7 3.17.1.7 The standard time interval expected from disconnection of a live Telephone Exchange Service to the connection of the Analog 2W Loops to ATI RVP is fifteen (15) minutes per Analog 2W Loop for all orders consisting of twenty (20) Analog 2W Loops or less. Orders involving more than twenty (20) Loops will require a negotiated interval. 3.3.1.8 3.17.1.8 Conversions involving LNP will be completed according to North American Numbering Council (“NANC”) standards, via the regional Number Portability Administration Center (“NPAC”). 3.3.1.9 3.17.1.9 If ATI RVP requires Analog 2W Loop conversions outside of the regularly scheduled Verizon RCCC operating hours, such conversions shall be separately negotiated. Additional charges (e.g. overtime labor charges) may apply for desired dates and times outside of regularly scheduled RCCC operating hours.

Conversion of Live Telephone Exchange Service to Analog 2W Loops. 3.3.1 The following coordination procedures shall apply to “live” cutovers of Verizon Customers who are converting their Telephone Exchange Services to ATI CSTC Telephone Exchange Services provisioned over Analog 2W unbundled Local Loops (“Analog 2W Loops) to be provided by Verizon to ATICSTC: 3.3.1.1 Coordinated cutover charges shall apply to conversions of live Telephone Exchange Services to Analog 2W Loops. When an outside dispatch is required to perform a conversion, additional charges may apply. If ATI CSTC does not request a coordinated cutover, Verizon will process ATICSTC’s order as a new installation subject to applicable standard provisioning intervals. 3.3.1.2 ATI CSTC shall request Analog 2W Loops for coordinated cutover from Verizon by delivering to Verizon a valid electronic Local Service Request (“LSR”). Xxxxxxx agrees to accept from ATI CSTC the date and time for the conversion designated on the LSR (“Scheduled Conversion Time”), provided that such designation is within the regularly scheduled operating hours of the Verizon Regional CLEC Control Center (“RCCC”) and subject to the availability of Verizon’s work force. In the event that XxxxxxxVerizon’s work force is not available, ATI CSTC and Verizon shall mutually agree on a New Conversion Time, as defined below. ATI CSTC shall designate the Scheduled Conversion Time subject to Verizon standard provisioning intervals as stated in the Verizon CLEC Handbook, as may be revised from time to time. Within three (3) Business Days of Verizon's receipt of such valid LSR, or as otherwise required by Applicable Law, Verizon shall provide ATI CSTC the scheduled due date for conversion of the Analog 2W Loops covered by such LSR. 3.3.1.3 ATI CSTC shall provide dial tone at the ATI collocation CSTC Collocation site at least forty-eight (48) hours prior to the Scheduled Conversion Time. 3.3.1.4 Either Party may contact the other Party to negotiate a new Scheduled Conversion Time (the “New Conversion Time”); provided, however, that each Party shall use commercially reasonable efforts to provide four (4) business hours’ advance notice to the other Party of its request for a New Conversion Time. Any Scheduled Conversion Time or New Conversion Time may not be rescheduled more than one (1) time in a Business Day, and any two New Conversion Times for a particular Analog 2W Loop shall differ by at least eight (8) hours, unless otherwise agreed to by the Parties. 3.3.1.5 If the New Conversion Time is more than one (1) business hour from the original Scheduled Conversion Time or from the previous New Conversion Time, the Party requesting such New Conversion Time shall be subject to the following: 3.3.1.5.1 If Verizon requests to reschedule outside of the one (1) hour time frame above, the Analog 2W Loops Service Order Charge for the original Scheduled Conversion Time or the previous New Conversion Time shall be credited upon request from ATICSTC; and 3.3.1.5.2 If ATI CSTC requests to reschedule outside the one one (1) hour time frame above, ATI CSTC shall be charged an additional Analog 2W Loops Service Order Charge for rescheduling the conversion to the New Conversion Time. 3.3.1.6 If ATI CSTC is not ready to accept service at the Scheduled Conversion Time or at a New Conversion Time, as applicable, an additional Service Order Charge shall apply. If Verizon is not available or ready to perform the conversion within thirty (30) minutes of the Scheduled Conversion Time or New Conversion Time, as applicable, Verizon and ATI CSTC will reschedule and, upon request from ATICSTC, Verizon will credit the Analog 2W Loop Service Order Charge for the original Scheduled Conversion Time. 3.3.1.7 The standard time interval expected from disconnection of a live Telephone Exchange Service to the connection of the Analog 2W Loops to ATI CSTC is fifteen (15) minutes per Analog 2W Loop for all orders consisting of twenty (20) Analog 2W Loops or less. Orders involving more than twenty (20) Loops will require a negotiated interval. 3.3.1.8 Conversions involving LNP will be completed according to North American Numbering Council (NANC) standards, via the regional Number Portability Administration Center (NPAC). 3.3.1.9 If ATI CSTC requires Analog 2W Loop conversions outside of the regularly scheduled Verizon RCCC operating hours, such conversions shall be separately negotiated. Additional charges (e.g. overtime labor charges) may apply for desired dates and times outside of regularly scheduled RCCC operating hours.

Conversion of Live Telephone Exchange Service to Analog 2W Loops. 3.3.1 3.17.1 The following coordination procedures shall apply to “live” cutovers of Verizon Customers who are converting their Telephone Exchange Services to ATI Rhythms Telephone Exchange Services provisioned over Analog 2W unbundled Local Loops (“Analog 2W Loops) to be provided by Verizon to ATIRhythms: 3.3.1.1 3.17.1.1 Coordinated cutover charges shall apply to conversions of live Telephone Exchange Services to Analog 2W Loops. When an outside dispatch is required to perform a conversion, additional charges may apply. If ATI Rhythms does not request a coordinated cutover, Verizon will process ATI’s Rhythms' order as a new installation subject to applicable standard provisioning intervals. 3.3.1.2 ATI 3.17.1.2 Rhythms shall request Analog 2W Loops for coordinated cutover from Verizon by delivering to Verizon a valid electronic Local Service Request (“LSR”). Xxxxxxx Verizon agrees to accept from ATI Rhythms the date and time for the conversion designated on the LSR (“Scheduled Conversion Time”), provided that such designation is within the regularly scheduled operating hours of the Verizon Regional CLEC Control Center (“RCCC”) and subject to the availability of Verizon’s work force. In the event that XxxxxxxVerizon’s work force is not available, ATI Rhythms and Verizon shall mutually agree on a New Conversion Time, as defined below. ATI Rhythms shall designate the Scheduled Conversion Time subject to Verizon standard provisioning intervals as stated in the Verizon CLEC Handbook, as may be revised from time to time. Within three (3) Business Days of Verizon's receipt of such valid LSR, or as otherwise required by Applicable Law, Verizon shall provide ATI Rhythms the scheduled due date for conversion of the Analog 2W Loops covered by such LSR. 3.3.1.3 ATI 3.17.1.3 Rhythms shall provide dial tone at the ATI collocation Rhythms Collocation site at least forty-eight (48) hours prior to the Scheduled Conversion Time. 3.3.1.4 3.17.1.4 Either Party may contact the other Party to negotiate a new Scheduled Conversion Time (the “New Conversion Time”); provided, however, that each Party shall use commercially reasonable efforts to provide four (4) business hours’ advance notice to the other Party of its request for a New Conversion Time. Any Scheduled Conversion Time or New Conversion Time may not be rescheduled more than one (1) time in a Business Daybusiness day, and any two New Conversion Times for a particular Analog 2W Loop Loops shall differ by at least eight (8) hours, unless otherwise agreed to by the Parties. 3.3.1.5 3.17.1.5 If the New Conversion Time is more than one (1) business hour from the original Scheduled Conversion Time or from the previous New Conversion Time, the Party requesting such New Conversion Time shall be subject to the following: 3.3.1.5.1 3.17.1.5.1 If Verizon requests to reschedule outside of the one (1) hour time frame above, the Analog 2W Loops Service Order Charge for the original Scheduled Conversion Time or the previous New Conversion Time shall be credited waived upon request from ATIRhythms; and 3.3.1.5.2 3.17.1.5.2 If ATI Rhythms requests to reschedule outside the one (1) hour time frame above, ATI Rhythms shall be charged an additional Analog 2W Loops Service Order Charge for rescheduling the conversion to the New Conversion Time. 3.3.1.6 3.17.1.6 If ATI Rhythms is not ready to accept service at the Scheduled Conversion Time or at a New Conversion Time, as applicable, an additional Service Order Charge shall apply. If Verizon is not available or ready to perform the conversion within thirty (30) minutes of the Scheduled Conversion Time or New Conversion Time, as applicable, Verizon and ATI Rhythms will reschedule and, upon request from ATIRhythms, Verizon will credit waive the Analog 2W Loop Service Order Charge for the original Scheduled Conversion Time. 3.3.1.7 3.17.1.7 The standard time interval expected from disconnection of a live Telephone Exchange Service to the connection of the Analog 2W Loops to ATI Rhythms is fifteen (15) minutes per Analog 2W Loop for all orders consisting of twenty (20) Analog 2W Loops or less. Orders involving more than twenty (20) Loops will require a negotiated interval. 3.3.1.8 3.17.1.8 Conversions involving LNP will be completed according to North American Numbering Council (“NANC”) standards, via the regional Number Portability Administration Center (“NPAC”). 3.3.1.9 3.17.1.9 If ATI Rhythms requires Analog 2W Loop conversions outside of the regularly scheduled Verizon RCCC operating hours, such conversions shall be separately negotiated. Additional charges (e.g. overtime labor charges) may apply for desired dates and times outside of regularly scheduled RCCC operating hours.

Conversion of Live Telephone Exchange Service to Analog 2W Loops. 3.3.1 The following coordination procedures shall apply to “live” cutovers of Verizon Customers who are converting their Telephone Exchange Services to ATI Lightcore Telephone Exchange Services provisioned over Analog 2W unbundled Local Loops (“Analog 2W Loops) to be provided by Verizon to ATILightcore: 3.3.1.1 Coordinated cutover charges shall apply to conversions of live Telephone Exchange Services to Analog 2W Loops. When an outside dispatch is required to perform a conversion, additional charges may apply. If ATI Lightcore does not request a coordinated cutover, Verizon will process ATILightcore’s order as a new installation subject to applicable standard provisioning intervals. 3.3.1.2 ATI Lightcore shall request Analog 2W Loops for coordinated cutover from Verizon by delivering to Verizon a valid electronic Local Service Request (“LSR”). Xxxxxxx agrees to accept from ATI Lightcore the date and time for the conversion designated on the LSR (“Scheduled Conversion Time”), provided that such designation is within the regularly scheduled operating hours of the Verizon Regional CLEC Control Center (“RCCC”) and subject to the availability of Verizon’s work force. In the event that Xxxxxxx’s work force is not available, ATI Lightcore and Verizon shall mutually agree on a New Conversion Time, as defined below. ATI Lightcore shall designate the Scheduled Conversion Time subject to Verizon standard provisioning intervals as stated in the Verizon CLEC Handbook, as may be revised from time to time. Within three (3) Business Days of Verizon's receipt of such valid LSR, or as otherwise required by Applicable Law, Verizon shall provide ATI Lightcore the scheduled due date for conversion of the Analog 2W Loops covered by such LSR. 3.3.1.3 ATI Lightcore shall provide dial tone at the ATI collocation Lightcore Collocation site at least forty-eight (48) hours prior to the Scheduled Conversion Time. 3.3.1.4 Either Party may contact the other Party to negotiate a new Scheduled Conversion Time (the “New Conversion Time”); provided, however, that each Party shall use commercially reasonable efforts to provide four (4) business hours’ advance notice to the other Party of its request for a New Conversion Time. Any Scheduled Conversion Time or New Conversion Time may not be rescheduled more than one (1) time in a Business Day, and any two New Conversion Times for a particular Analog 2W Loop shall differ by at least eight (8) hours, unless otherwise agreed to by the Parties. 3.3.1.5 If the New Conversion Time is more than one (1) business hour from the original Scheduled Conversion Time or from the previous New Conversion Time, the Party requesting such New Conversion Time shall be subject to the following: 3.3.1.5.1 If Verizon requests to reschedule outside of the one (1) hour time frame above, the Analog 2W Loops Service Order Charge for the original Scheduled Conversion Time or the previous New Conversion Time shall be credited upon request from ATILightcore; and 3.3.1.5.2 If ATI Lightcore requests to reschedule outside the one (1) hour time frame above, ATI Lightcore shall be charged an additional Analog 2W Loops Service Order Charge for rescheduling the conversion to the New Conversion Time. 3.3.1.6 If ATI Lightcore is not ready to accept service at the Scheduled Conversion Time or at a New Conversion Time, as applicable, an additional Service Order Charge shall apply. If Verizon is not available or ready to perform the conversion within thirty (30) minutes of the Scheduled Conversion Time or New Conversion Time, as applicable, Verizon and ATI Lightcore will reschedule and, upon request from ATILightcore, Verizon will credit the Analog 2W Loop Service Order Charge for the original Scheduled Conversion Time. 3.3.1.7 The standard time interval expected from disconnection of a live Telephone Exchange Service to the connection of the Analog 2W Loops to ATI Lightcore is fifteen (15) minutes per Analog 2W Loop for all orders consisting of twenty (20) Analog 2W Loops or less. Orders involving more than twenty (20) Loops will require a negotiated interval. 3.3.1.8 Conversions involving LNP will be completed according to North American Numbering Council (NANC) standards, via the regional Number Portability Administration Center (NPAC). 3.3.1.9 If ATI Lightcore requires Analog 2W Loop conversions outside of the regularly scheduled Verizon RCCC operating hours, such conversions shall be separately negotiated. Additional charges (e.g. overtime labor charges) may apply for desired dates and times outside of regularly scheduled RCCC operating hours.

Conversion of Live Telephone Exchange Service to Analog 2W Loops. 3.3.1 The following coordination procedures shall apply to “live” cutovers of Verizon Customers who are converting their Telephone Exchange Services to ATI InterGlobe Telephone Exchange Services provisioned over Analog 2W unbundled Local Loops (“Analog 2W Loops) to be provided by Verizon to ATIInterGlobe: 3.3.1.1 Coordinated cutover charges shall apply to conversions of live Telephone Exchange Services to Analog 2W Loops. When an outside dispatch is required to perform a conversion, additional charges may apply. If ATI InterGlobe does not request a coordinated cutover, Verizon will process ATIInterGlobe’s order as a new installation subject to applicable standard provisioning intervals. 3.3.1.2 ATI InterGlobe shall request Analog 2W Loops for coordinated cutover from Verizon by delivering to Verizon a valid electronic Local Service Request (“LSR”). Xxxxxxx Verizon agrees to accept from ATI InterGlobe the date and time for the conversion designated on the LSR (“Scheduled Conversion Time”), provided that such designation is within the regularly scheduled operating hours of the Verizon Regional CLEC Control Center (“RCCC”) and subject to the availability of Verizon’s work force. In the event that XxxxxxxVerizon’s work force is not available, ATI InterGlobe and Verizon shall mutually agree on a New Conversion Time, as defined below. ATI InterGlobe shall designate the Scheduled Conversion Time subject to Verizon standard provisioning intervals as stated in the Verizon CLEC Handbook, as may be revised from time to time. Within three (3) Business Days of Verizon's receipt of such valid LSR, or as otherwise required by Applicable Law, Verizon shall provide ATI InterGlobe the scheduled due date for conversion of the Analog 2W Loops covered by such LSR. 3.3.1.3 ATI InterGlobe shall provide dial tone at the ATI collocation InterGlobe Collocation site at least forty-eight (48) hours prior to the Scheduled Conversion Time. 3.3.1.4 Either Party may contact the other Party to negotiate a new Scheduled Conversion Time (the “New Conversion Time”); provided, however, that each Party shall use commercially reasonable efforts to provide four (4) business hours’ advance notice to the other Party of its request for a New Conversion Time. Any Scheduled Conversion Time or New Conversion Time may not be rescheduled more than one (1) time in a Business Day, and any two New Conversion Times for a particular Analog 2W Loop shall differ by at least eight (8) hours, unless otherwise agreed to by the Parties. 3.3.1.5 If the New Conversion Time is more than one (1) business hour from the original Scheduled Conversion Time or from the previous New Conversion Time, the Party requesting such New Conversion Time shall be subject to the following: 3.3.1.5.1 If Verizon requests to reschedule outside of the one (1) hour time frame above, the Analog 2W Loops Service Order Charge for the original Scheduled Conversion Time or the previous New Conversion Time shall be credited upon request from ATIInterGlobe; and 3.3.1.5.2 If ATI InterGlobe requests to reschedule outside the one (1) hour time frame above, ATI InterGlobe shall be charged an additional Analog 2W Loops Service Order Charge for rescheduling the conversion to the New Conversion Time. 3.3.1.6 If ATI InterGlobe is not ready to accept service at the Scheduled Conversion Time or at a New Conversion Time, as applicable, an additional Service Order Charge shall apply. If Verizon is not available or ready to perform the conversion within thirty (30) minutes of the Scheduled Conversion Time or New Conversion Time, as applicable, Verizon and ATI InterGlobe will reschedule and, upon request from ATIInterGlobe, Verizon will credit the Analog 2W Loop Service Order Charge for the original Scheduled Conversion Time. 3.3.1.7 The standard time interval expected from disconnection of a live Telephone Exchange Service to the connection of the Analog 2W Loops to ATI InterGlobe is fifteen (15) minutes per Analog 2W Loop for all orders consisting of twenty (20) Analog 2W Loops or less. Orders involving more than twenty (20) Loops will require a negotiated interval. 3.3.1.8 Conversions involving LNP will be completed according to North American Numbering Council (NANC) standards, via the regional Number Portability Administration Center (NPAC). 3.3.1.9 If ATI InterGlobe requires Analog 2W Loop conversions outside of the regularly scheduled Verizon RCCC operating hours, such conversions shall be separately negotiated. Additional charges (e.g. overtime labor charges) may apply for desired dates and times outside of regularly scheduled RCCC operating hours.

Conversion of Live Telephone Exchange Service to Analog 2W Loops. 3.3.1 The following coordination procedures shall apply to “live” cutovers of Verizon Customers who are converting their Telephone Exchange Services to ATI KDL Telephone Exchange Services provisioned over Analog 2W unbundled Local Loops (“Analog 2W Loops) to be provided by Verizon to ATIKDL: 3.3.1.1 Coordinated cutover charges shall apply to conversions of live Telephone Exchange Services to Analog 2W Loops. When an outside dispatch is required to perform a conversion, additional charges may apply. If ATI KDL does not request a coordinated cutover, Verizon will process ATIKDL’s order as a new installation subject to applicable standard provisioning intervals. 3.3.1.2 ATI KDL shall request Analog 2W Loops for coordinated cutover from Verizon by delivering to Verizon a valid electronic Local Service Request (“LSR”). Xxxxxxx Verizon agrees to accept from ATI KDL the date and time for the conversion designated on the LSR (“Scheduled Conversion Time”), provided that such designation is within the regularly scheduled operating hours of the Verizon Regional CLEC Control Center (“RCCC”) and subject to the availability of Verizon’s work force. In the event that XxxxxxxVerizon’s work force is not available, ATI KDL and Verizon shall mutually agree on a New Conversion Time, as defined below. ATI KDL shall designate the Scheduled Conversion Time subject to Verizon standard provisioning intervals as stated in the Verizon CLEC Handbook, as may be revised from time to time. Within three (3) Business Days of Verizon's receipt of such valid LSR, or as otherwise required by Applicable Law, Verizon shall provide ATI KDL the scheduled due date for conversion of the Analog 2W Loops covered by such LSR. 3.3.1.3 ATI KDL shall provide dial tone at the ATI KDL collocation site at least forty-eight (48) hours prior to the Scheduled Conversion Time. 3.3.1.4 Either Party may contact the other Party to negotiate a new Scheduled Conversion Time (the “New Conversion Time”); provided, however, that each Party shall use commercially reasonable efforts to provide four (4) business hours’ advance notice to the other Party of its request for a New Conversion Time. Any Scheduled Conversion Time or New Conversion Time may not be rescheduled more than one (1) time in a Business Day, and any two New Conversion Times for a particular Analog 2W Loop shall differ by at least eight (8) hours, unless otherwise agreed to by the Parties. 3.3.1.5 If the New Conversion Time is more than one (1) business hour from the original Scheduled Conversion Time or from the previous New Conversion Time, the Party requesting such New Conversion Time shall be subject to the following: 3.3.1.5.1 If Verizon requests to reschedule outside of the one (1) hour time frame above, the Analog 2W Loops Service Order Charge for the original Scheduled Conversion Time or the previous New Conversion Time shall be credited upon request from ATIKDL; and 3.3.1.5.2 If ATI KDL requests to reschedule outside the one one (1) hour time frame above, ATI KDL shall be charged an additional Analog 2W Loops Service Order Charge for rescheduling the conversion to the New Conversion Time. 3.3.1.6 If ATI KDL is not ready to accept service at the Scheduled Conversion Time or at a New Conversion Time, as applicable, an additional Service Order Charge shall apply. If Verizon is not available or ready to perform the conversion within thirty (30) minutes of the Scheduled Conversion Time or New Conversion Time, as applicable, Verizon and ATI KDL will reschedule and, upon request from ATIKDL, Verizon will credit the Analog 2W Loop Service Order Charge for the original Scheduled Conversion Time. 3.3.1.7 The standard time interval expected from disconnection of a live Telephone Exchange Service to the connection of the Analog 2W Loops to ATI KDL is fifteen (15) minutes per Analog 2W Loop for all orders consisting of twenty (20) Analog 2W Loops or less. Orders involving more than twenty (20) Loops will require a negotiated interval. 3.3.1.8 Conversions involving LNP will be completed according to North American Numbering Council (NANC) standards, via the regional Number Portability Administration Center (NPAC). 3.3.1.9 If ATI KDL requires Analog 2W Loop conversions outside of the regularly scheduled Verizon RCCC operating hours, such conversions shall be separately negotiated. Additional charges (e.g. overtime labor charges) may apply for desired dates and times outside of regularly scheduled RCCC operating hours.

Conversion of Live Telephone Exchange Service to Analog 2W Loops. 3.3.1 3.17.1 The following coordination procedures shall apply to “live” cutovers of Verizon Customers who are converting their Telephone Exchange Services to ATI NOS Telephone Exchange Services provisioned over Analog 2W unbundled Local Loops (“Analog 2W Loops) to be provided by Verizon to ATINOS: 3.3.1.1 3.17.1.1 Coordinated cutover charges shall apply to conversions of live Telephone Exchange Services to Analog 2W Loops. When an outside dispatch is required to perform a conversion, additional charges may apply. If ATI NOS does not request a coordinated cutover, Verizon will process ATINOS’s order as a new installation subject to applicable standard provisioning intervals. 3.3.1.2 ATI 3.17.1.2 NOS shall request Analog 2W Loops for coordinated cutover from Verizon by delivering to Verizon a valid electronic Local Service Request (“LSR”). Xxxxxxx agrees to accept from ATI NOS the date and time for the conversion designated on the LSR (“Scheduled Conversion Time”), provided that such designation is within the regularly scheduled operating hours of the Verizon Regional CLEC Control Center (“RCCC”) and subject to the availability of Verizon’s work force. In the event that Xxxxxxx’s work force is not available, ATI NOS and Verizon shall mutually agree on a New Conversion Time, as defined below. ATI NOS shall designate the Scheduled Conversion Time subject to Verizon standard provisioning intervals as stated in the Verizon CLEC Handbook, as may be revised from time to time. Within three (3) Business Days of Verizon's receipt of such valid LSR, or as otherwise required by Applicable Law, Verizon shall provide ATI NOS the scheduled due date for conversion of the Analog 2W Loops covered by such LSR. 3.3.1.3 ATI 3.17.1.3 NOS shall provide dial tone at the ATI collocation NOS Collocation site at least forty-eight (48) hours prior to the Scheduled Conversion Time. 3.3.1.4 3.17.1.4 Either Party may contact the other Party to negotiate a new Scheduled Conversion Time (the “New Conversion Time”); provided, however, that each Party shall use commercially reasonable efforts to provide four (4) business hours’ advance notice to the other Party of its request for a New Conversion Time. Any Scheduled Conversion Time or New Conversion Time may not be rescheduled more than one (1) time in a Business Day, and any two New Conversion Times for a particular Analog 2W Loop Loops shall differ by at least eight (8) hours, unless otherwise agreed to by the Parties. 3.3.1.5 3.17.1.5 If the New Conversion Time is more than one (1) business hour from the original Scheduled Conversion Time or from the previous New Conversion Time, the Party requesting such New Conversion Time shall be subject to the following: 3.3.1.5.1 3.17.1.5.1 If Verizon requests to reschedule outside of the one (1) hour time frame above, the Analog 2W Loops Service Order Charge for the original Scheduled Conversion Time or the previous New Conversion Time shall be credited waived upon request from ATINOS; and 3.3.1.5.2 3.17.1.5.2 If ATI NOS requests to reschedule outside the one one (1) hour time frame above, ATI NOS shall be charged an additional Analog 2W Loops Service Order Charge for rescheduling the conversion to the New Conversion Time. 3.3.1.6 3.17.1.6 If ATI NOS is not ready to accept service at the Scheduled Conversion Time or at a New Conversion Time, as applicable, an additional Service Order Charge shall apply. If Verizon is not available or ready to perform the conversion within thirty (30) minutes of the Scheduled Conversion Time or New Conversion Time, as applicable, Verizon and ATI NOS will reschedule and, upon request from ATINOS, Verizon will credit waive the Analog 2W Loop Service Order Charge for the original Scheduled Conversion Time. 3.3.1.7 3.17.1.7 The standard time interval expected from disconnection of a live Telephone Exchange Service to the connection of the Analog 2W Loops to ATI NOS is fifteen (15) minutes per Analog 2W Loop for all orders consisting of twenty (20) Analog 2W Loops or less. Orders involving more than twenty (20) Loops will require a negotiated interval. 3.3.1.8 3.17.1.8 Conversions involving LNP will be completed according to North American Numbering Council (“NANC”) standards, via the regional Number Portability Administration Center (“NPAC”). 3.3.1.9 3.17.1.9 If ATI NOS requires Analog 2W Loop conversions outside of the regularly scheduled Verizon RCCC operating hours, such conversions shall be separately negotiated. Additional charges (e.g. overtime labor charges) may apply for desired dates and times outside of regularly scheduled RCCC operating hours.

Conversion of Live Telephone Exchange Service to Analog 2W Loops. 3.3.1 3.17.1 The following coordination procedures shall apply to “live” cutovers of Verizon Customers who are converting their Telephone Exchange Services Servi ces to ATI ICG Telephone Exchange Services provisioned over Analog 2W unbundled Local Loops (“Analog 2W Loops) to be provided by Verizon to ATIICG: 3.3.1.1 3.17.1.1 Coordinated cutover charges shall apply to conversions of live Telephone Exchange Services to Analog 2W Loops. When an outside dispatch is required to perform a conversion, additional charges may apply. If ATI ICG does not request a coordinated cutover, Verizon will process ATIICG’s order as a new installation subject to applicable standard provisioning intervals. 3.3.1.2 ATI 3.17.1.2 ICG shall request Analog 2W Loops for coordinated cutover from Verizon by delivering to Verizon a valid electronic Local Service Request (“LSR”). Xxxxxxx Verizon agrees to accept from ATI ICG the date and time for the conversion designated on the LSR (“Scheduled Conversion Time”), provided that such designation is within the regularly scheduled operating hours of the Verizon Regional CLEC Control Center (“RCCC”) and subject to the availability of Verizon’s work force. In the event that Xxxxxxx’s work force is not available, ATI ICG and Verizon shall mutually agree on a New Conversion Time, as defined below. ATI ICG shall designate the Scheduled Conversion Time subject to Verizon standard provisioning intervals as stated in the Verizon CLEC Handbook, as may be revised from time to time. Within three (3) Business Days of Verizon's receipt of such valid LSR, or as otherwise required by Applicable Law, Verizon shall provide ATI ICG the scheduled due date for conversion of the Analog 2W Loops covered by such LSR. 3.3.1.3 ATI 3.17.1.3 ICG shall provide dial tone at the ATI collocation ICG Collocation site at least forty-eight (48) hours prior to the Scheduled Conversion Time. 3.3.1.4 3.17.1.4 Either Party may contact the other Party to negotiate a new Scheduled Conversion Time (the “New Conversion Time”); provided, however, that each Party shall use commercially reasonable efforts to provide four (4) business hours’ advance notice to the other Party of its request for a New Conversion Time. Any Scheduled Conversion Time or New Conversion Time may not be rescheduled more than one (1) time in a Business Day, and any two New Conversion Times for a particular Analog 2W Loop Loops shall differ by at least eight (8) hours, unless otherwise agreed to by the Parties. 3.3.1.5 3.17.1.5 If the New Conversion Time is more than one (1) business hour from the original Scheduled Conversion Time or from the previous New Conversion Time, the Party requesting such New Conversion Time shall be subject to the following: 3.3.1.5.1 3.17.1.5.1 If Verizon requests to reschedule outside of the one (1) hour time frame above, the Analog 2W Loops Service Order Charge for the original Scheduled Conversion Time or the previous New Conversion Time shall be credited waived upon request from ATIICG; and 3.3.1.5.2 3.17.1.5.2 If ATI ICG requests to reschedule outside the one one (1) hour time frame above, ATI ICG shall be charged an additional Analog 2W Loops Service Order Charge for rescheduling the conversion to the New Conversion Time. 3.3.1.6 3.17.1.6 If ATI ICG is not ready to accept service at the Scheduled Conversion Time or at a New Conversion Time, as applicable, an additional Service Order Charge shall apply. If Verizon is not available or ready to perform the conversion within thirty (30) minutes of the Scheduled Conversion Time or New Conversion Time, as applicable, Verizon and ATI ICG will reschedule and, upon request from ATIICG, Verizon will credit waive the Analog 2W Loop Service Order Charge for the original Scheduled Conversion Time. 3.3.1.7 3.17.1.7 The standard time interval expected from disconnection of a live Telephone Exchange Service to the connection of the Analog 2W Loops to ATI ICG is fifteen (15) minutes per Analog 2W Loop for all orders consisting of twenty (20) Analog 2W Loops or less. Orders involving more than twenty (20) Loops will require a negotiated interval. 3.3.1.8 3.17.1.8 Conversions involving LNP will be completed according to North American Numbering Council (“NANC”) standards, via the regional Number Portability Administration Center (“NPAC”). 3.3.1.9 3.17.1.9 If ATI ICG requires Analog 2W Loop conversions outside of the regularly scheduled Verizon RCCC operating hours, such conversions shall be separately negotiated. Additional charges (e.g. overtime labor charges) may apply for desired dates and times outside of regularly scheduled RCCC operating hours.

Conversion of Live Telephone Exchange Service to Analog 2W Loops. 3.3.1 The following coordination procedures shall apply to “live” cutovers of Verizon Customers who are converting their Telephone Exchange Services to ATI ECI Telephone Exchange Services provisioned over Analog 2W unbundled Local Loops (“Analog 2W Loops) to be provided by Verizon to ATIECI: 3.3.1.1 Coordinated cutover charges shall apply to conversions of live Telephone Exchange Services to Analog 2W Loops. When an outside dispatch is required to perform a conversion, additional charges may apply. If ATI ECI does not request a coordinated cutover, Verizon will process ATIECI’s order as a new installation subject to applicable standard provisioning intervals. 3.3.1.2 ATI ECI shall request Analog 2W Loops for coordinated cutover from Verizon by delivering to Verizon a valid electronic Local Service Request (“LSR”). Xxxxxxx Verizon agrees to accept from ATI ECI the date and time for the conversion designated on the LSR (“Scheduled Conversion Time”), provided that such designation is within the regularly scheduled operating hours of the Verizon Regional CLEC Control Center (“RCCC”) and subject to the availability of Verizon’s work force. In the event that XxxxxxxVerizon’s work force is not available, ATI ECI and Verizon shall mutually agree on a New Conversion Time, as defined below. ATI ECI shall designate the Scheduled Conversion Time subject to Verizon standard provisioning intervals as stated in the Verizon CLEC Handbook, as may be revised from time to time. Within three (3) Business Days of Verizon's receipt of such valid LSR, or as otherwise required by Applicable Law, Verizon shall provide ATI ECI the scheduled due date for conversion of the Analog 2W Loops covered by such LSR. 3.3.1.3 ATI ECI shall provide dial tone at the ATI ECI collocation site at least forty-eight (48) hours prior to the Scheduled Conversion Time. 3.3.1.4 Either Party may contact the other Party to negotiate a new Scheduled Conversion Time (the “New Conversion Time”); provided, however, that each Party shall use commercially reasonable efforts to provide four (4) business hours’ advance notice to the other Party of its request for a New Conversion Time. Any Scheduled Conversion Time or New Conversion Time may not be rescheduled more than one (1) time in a Business Day, and any two New Conversion Times for a particular Analog 2W Loop shall differ by at least eight (8) hours, unless otherwise agreed to by the Parties. 3.3.1.5 If the New Conversion Time is more than one (1) business hour from the original Scheduled Conversion Time or from the previous New Conversion Time, the Party requesting such New Conversion Time shall be subject to the following: 3.3.1.5.1 If Verizon requests to reschedule outside of the one (1) hour time frame above, the Analog 2W Loops Service Order Charge for the original Scheduled Conversion Time or the previous New Conversion Time shall be credited upon request from ATIECI; and 3.3.1.5.2 If ATI ECI requests to reschedule outside the one (1) hour time frame above, ATI ECI shall be charged an additional Analog 2W Loops Service Order Charge for rescheduling the conversion to the New Conversion Time. 3.3.1.6 If ATI ECI is not ready to accept service at the Scheduled Conversion Time or at a New Conversion Time, as applicable, an additional Service Order Charge shall apply. If Verizon is not available or ready to perform the conversion within thirty (30) minutes of the Scheduled Conversion Time or New Conversion Time, as applicable, Verizon and ATI ECI will reschedule and, upon request from ATIECI, Verizon will credit the Analog 2W Loop Service Order Charge for the original Scheduled Conversion Time. 3.3.1.7 The standard time interval expected from disconnection of a live Telephone Exchange Service to the connection of the Analog 2W Loops to ATI ECI is fifteen (15) minutes per Analog 2W Loop for all orders consisting of twenty (20) Analog 2W Loops or less. Orders involving more than twenty (20) Loops will require a negotiated interval. 3.3.1.8 Conversions involving LNP will be completed according to North American Numbering Council (NANC) standards, via the regional Number Portability Administration Center (NPAC). 3.3.1.9 If ATI ECI requires Analog 2W Loop conversions outside of the regularly scheduled Verizon RCCC operating hours, such conversions shall be separately negotiated. Additional charges (e.g. overtime labor charges) may apply for desired dates and times outside of regularly scheduled RCCC operating hours.

Conversion of Live Telephone Exchange Service to Analog 2W Loops. 3.3.1 The following coordination procedures shall apply to “live” cutovers of Verizon Customers who are converting their Telephone Exchange Services to ATI CCA Telephone Exchange Services provisioned over Analog 2W unbundled Local Loops (“Analog 2W Loops) to be provided by Verizon to ATICCA: 3.3.1.1 Coordinated cutover charges shall apply to conversions of live Telephone Exchange Services to Analog 2W Loops. When an outside dispatch is required to perform a conversion, additional charges may apply. If ATI CCA does not request a coordinated cutover, Verizon will process ATICCA’s order as a new installation subject to applicable standard provisioning intervals. 3.3.1.2 ATI CCA shall request Analog 2W Loops for coordinated cutover from Verizon by delivering to Verizon a valid electronic Local Service Request (“LSR”). Xxxxxxx agrees to accept from ATI CCA the date and time for the conversion designated on the LSR (“Scheduled Conversion Time”), provided that such designation is within the regularly scheduled operating hours of the Verizon Regional CLEC Control Center (“RCCC”) and subject to the availability of Verizon’s work force. In the event that Xxxxxxx’s work force is not available, ATI CCA and Verizon shall mutually agree on a New Conversion Time, as defined below. ATI CCA shall designate the Scheduled Conversion Time subject to Verizon standard provisioning intervals as stated in the Verizon CLEC Handbook, as may be revised from time to time. Within three (3) Business Days of Verizon's receipt of such valid LSR, or as otherwise required by Applicable Law, Verizon shall provide ATI CCA the scheduled due date for conversion of the Analog 2W Loops covered by such LSR. 3.3.1.3 ATI CCA shall provide dial tone at the ATI collocation CCA Collocation site at least forty-eight (48) hours prior to the Scheduled Conversion Time. 3.3.1.4 Either Party may contact the other Party to negotiate a new Scheduled Conversion Time (the “New Conversion Time”); provided, however, that each Party shall use commercially reasonable efforts to provide four (4) business hours’ advance notice to the other Party of its request for a New Conversion Time. Any Scheduled Conversion Time or New Conversion Time may not be rescheduled more than one (1) time in a Business Day, and any two New Conversion Times for a particular Analog 2W Loop shall differ by at least eight (8) hours, unless otherwise agreed to by the Parties. 3.3.1.5 If the New Conversion Time is more than one (1) business hour from the original Scheduled Conversion Time or from the previous New Conversion Time, the Party requesting such New Conversion Time shall be subject to the following: 3.3.1.5.1 If Verizon requests to reschedule outside of the one (1) hour time frame above, the Analog 2W Loops Service Order Charge for the original Scheduled Conversion Time or the previous New Conversion Time shall be credited upon request from ATICCA; and 3.3.1.5.2 If ATI CCA requests to reschedule outside the one one (1) hour time frame above, ATI CCA shall be charged an additional Analog 2W Loops Service Order Charge for rescheduling the conversion to the New Conversion Time. 3.3.1.6 If ATI CCA is not ready to accept service at the Scheduled Conversion Time or at a New Conversion Time, as applicable, an additional Service Order Charge shall apply. If Verizon is not available or ready to perform the conversion within thirty (30) minutes of the Scheduled Conversion Time or New Conversion Time, as applicable, Verizon and ATI CCA will reschedule and, upon request from ATICCA, Verizon will credit the Analog 2W Loop Service Order Charge for the original Scheduled Conversion Time. 3.3.1.7 The standard time interval expected from disconnection of a live Telephone Exchange Service to the connection of the Analog 2W Loops to ATI CCA is fifteen (15) minutes per Analog 2W Loop for all orders consisting of twenty (20) Analog 2W Loops or less. Orders involving more than twenty (20) Loops will require a negotiated interval. 3.3.1.8 Conversions involving LNP will be completed according to North American Numbering Council (NANC) standards, via the regional Number Portability Administration Center (NPAC). 3.3.1.9 If ATI CCA requires Analog 2W Loop conversions outside of the regularly scheduled Verizon RCCC operating hours, such conversions shall be separately negotiated. Additional charges (e.g. overtime labor charges) may apply for desired dates and times outside of regularly scheduled RCCC operating hours.

Conversion of Live Telephone Exchange Service to Analog 2W Loops. 3.3.1 3.17.1 The following coordination procedures shall apply to “live” cutovers of Verizon Customers who are converting their Telephone Exchange Services to ATI ECSI Telephone Exchange Services provisioned over Analog 2W unbundled Local Loops (“Analog 2W Loops) to be provided by Verizon to ATIECSI: 3.3.1.1 3.17.1.1 Coordinated cutover charges shall apply to conversions of live Telephone Exchange Services to Analog 2W Loops. When an outside dispatch is required to perform a conversion, additional charges may apply. If ATI ECSI does not request a coordinated cutover, Verizon will process ATIECSI’s order as a new installation subject to applicable standard provisioning intervals. 3.3.1.2 ATI 3.17.1.2 ECSI shall request Analog 2W Loops for coordinated cutover from Verizon by delivering to Verizon a valid electronic Local Service Request (“LSR”). Xxxxxxx Verizon agrees to accept from ATI ECSI the date and time for the conversion designated on the LSR (“Scheduled Conversion Time”), provided that such designation is within the regularly scheduled operating hours of the Verizon Regional CLEC Control Center (“RCCC”) and subject to the availability of Verizon’s work force. In the event that XxxxxxxVerizon’s work force is not available, ATI ECSI and Verizon shall mutually agree on a New Conversion Time, as defined below. ATI ECSI shall designate the Scheduled Conversion Time subject to Verizon standard provisioning intervals as stated in the Verizon CLEC Handbook, as may be revised from time to time. Within three (3) Business Days of Verizon's receipt of such valid LSR, or as otherwise required by Applicable Law, Verizon shall provide ATI ECSI the scheduled due date for conversion of the Analog 2W Loops covered by such LSR. 3.3.1.3 ATI 3.17.1.3 ECSI shall provide dial tone at the ATI collocation ECSI Collocation site at least forty-eight (48) hours prior to the Scheduled Conversion Time. 3.3.1.4 3.17.1.4 Either Party may contact the other Party to negotiate a new Scheduled Conversion Time (the “New Conversion Time”); provided, however, that each Party shall use commercially reasonable efforts to provide four (4) business hours’ advance notice to the other Party of its request for a New Conversion Time. Any Scheduled Conversion Time or New Conversion Time may not be rescheduled more than one (1) time in a Business Day, and any two New Conversion Times for a particular Analog 2W Loop Loops shall differ by at least eight (8) hours, unless otherwise agreed to by the Parties. 3.3.1.5 3.17.1.5 If the New Conversion Time is more than one (1) business hour from the original Scheduled Conversion Time or from the previous New Conversion Time, the Party requesting such New Conversion Time shall be subject to the following: 3.3.1.5.1 3.17.1.5.1 If Verizon requests to reschedule outside of the one (1) hour time frame above, the Analog 2W Loops Service Order Charge for the original Scheduled Conversion Time or the previous New Conversion Time shall be credited waived upon request from ATIECSI; and 3.3.1.5.2 3.17.1.5.2 If ATI ECSI requests to reschedule outside the one one (1) hour time frame above, ATI ECSI shall be charged an additional Analog 2W Loops Service Order Charge for rescheduling the conversion to the New Conversion Time. 3.3.1.6 3.17.1.6 If ATI ECSI is not ready to accept service at the Scheduled Conversion Time or at a New Conversion Time, as applicable, an additional Service Order Charge shall apply. If Verizon is not available or ready to perform the conversion within thirty (30) minutes of the Scheduled Conversion Time or New Conversion Time, as applicable, Verizon and ATI ECS I will reschedule and, upon request from ATIECSI, Verizon will credit waive the Analog 2W Loop Service Order Charge for the original Scheduled Conversion Time. 3.3.1.7 3.17.1.7 The standard time interval expected from disconnection of a live Telephone Exchange Service to the connection of the Analog 2W Loops to ATI ECSI is fifteen (15) minutes per Analog 2W Loop for all orders consisting of twenty (20) Analog 2W Loops or less. Orders involving more than twenty (20) Loops will require a negotiated interval. 3.3.1.8 3.17.1.8 Conversions involving LNP will be completed according to North American Numbering Council (“NANC”) standards, via the regional Number Portability Administration Center (“NPAC”). 3.3.1.9 3.17.1.9 If ATI ECSI requires Analog 2W Loop conversions outside of the regularly scheduled Verizon RCCC operating hours, such conversions shall be separately negotiated. Additional charges (e.g. overtime labor charges) may apply for desired dates and times outside of regularly scheduled RCCC operating hours.

Conversion of Live Telephone Exchange Service to Analog 2W Loops. 3.3.1 The following coordination procedures shall apply to “live” cutovers of Verizon Customers who are converting their Telephone Exchange Services to ATI Global Link Telephone Exchange Services provisioned over Analog 2W unbundled Local Loops (“Analog 2W Loops) to be provided by Verizon to ATIGlobal Link: 3.3.1.1 Coordinated cutover charges shall apply to conversions of live Telephone Exchange Services to Analog 2W Loops. When an outside dispatch is required to perform a conversion, additional charges may apply. If ATI Global Link does not request a coordinated cutover, Verizon will process ATIGlobal Link’s order as a new installation subject to applicable standard provisioning intervals. 3.3.1.2 ATI Global Link shall request Analog 2W Loops for coordinated cutover from Verizon by delivering to Verizon a valid electronic Local Service Request (“LSR”). Xxxxxxx Verizon agrees to accept from ATI Global Link the date and time for the conversion designated on the LSR (“Scheduled Conversion Time”), provided that such designation is within the regularly scheduled operating hours of the Verizon Regional CLEC Control Center (“RCCC”) and subject to the availability of Verizon’s work force. In the event that XxxxxxxVerizon’s work force is not available, ATI Global Link and Verizon shall mutually agree on a New Conversion Time, as defined below. ATI Global Link shall designate the Scheduled Conversion Time subject to Verizon standard provisioning intervals as stated in the Verizon CLEC Handbook, as may be revised from time to time. Within three (3) Business Days of Verizon's receipt of such valid LSR, or as otherwise required by Applicable Law, Verizon shall provide ATI Global Link the scheduled due date for conversion of the Analog 2W Loops covered by such LSR. 3.3.1.3 ATI Global Link shall provide dial tone at the ATI Global Link collocation site at least forty-eight (48) hours prior to the Scheduled Conversion Time. 3.3.1.4 Either Party may contact the other Party to negotiate a new Scheduled Conversion Time (the “New Conversion Time”); provided, however, that each Party shall use commercially reasonable efforts to provide four (4) business hours’ advance notice to the other Party of its request for a New Conversion Time. Any Scheduled Conversion Time or New Conversion Time may not be rescheduled more than one (1) time in a Business Day, and any two New Conversion Times for a particular Analog 2W Loop shall differ by at least eight (8) hours, unless otherwise agreed to by the Parties. 3.3.1.5 If the New Conversion Time is more than one (1) business hour from the original Scheduled Conversion Time or from the previous New Conversion Time, the Party requesting such New Conversion Time shall be subject to the following: 3.3.1.5.1 If Verizon requests to reschedule outside of the one (1) hour time frame above, the Analog 2W Loops Service Order Charge for the original Scheduled Conversion Time or the previous New Conversion Time shall be credited upon request from ATIGlobal Link; and 3.3.1.5.2 If ATI Global Link requests to reschedule outside the one (1) hour time frame above, ATI Global Link shall be charged an additional Analog 2W Loops Service Order Charge for rescheduling the conversion to the New Conversion Time. 3.3.1.6 If ATI Global Link is not ready to accept service at the Scheduled Conversion Time or at a New Conversion Time, as applicable, an additional Service Order Charge shall apply. If Verizon is not available or ready to perform the conversion within thirty (30) minutes of the Scheduled Conversion Time or New Conversion Time, as applicable, Verizon and ATI Global Link will reschedule and, upon request from ATIGlobal Link, Verizon will credit the Analog 2W Loop Service Order Charge for the original Scheduled Conversion Time. 3.3.1.7 The standard time interval expected from disconnection of a live Telephone Exchange Service to the connection of the Analog 2W Loops to ATI Global Link is fifteen (15) minutes per Analog 2W Loop for all orders consisting of twenty (20) Analog 2W Loops or less. Orders involving more than twenty (20) Loops will require a negotiated interval. 3.3.1.8 Conversions involving LNP will be completed according to North American Numbering Council (NANC) standards, via the regional Number Portability Administration Center (NPAC). 3.3.1.9 If ATI Global Link requires Analog 2W Loop conversions outside of the regularly scheduled Verizon RCCC operating hours, such conversions shall be separately negotiated. Additional charges (e.g. overtime labor charges) may apply for desired dates and times outside of regularly scheduled RCCC operating hours.

Conversion of Live Telephone Exchange Service to Analog 2W Loops. 3.3.1 3.17.1 The following coordination procedures shall apply to “live” cutovers of Verizon Customers who are converting their Telephone Exchange Services to ATI ICG Telephone Exchange Services provisioned over Analog 2W unbundled Local Loops (“Analog 2W Loops) to be provided by Verizon to ATIICG: 3.3.1.1 3.17.1.1 Coordinated cutover charges shall apply to conversions of live Telephone Exchange Services to Analog 2W Loops. When an outside dispatch is required to perform a conversion, additional charges may apply. If ATI ICG does not request a coordinated cutover, Verizon will process ATIICG’s order as a new installation subject to applicable standard provisioning intervals. 3.3.1.2 ATI 3.17.1.2 ICG shall request Analog 2W Loops for coordinated cutover from Verizon by delivering to Verizon a valid electronic Local Service Request (“LSR”). Xxxxxxx Verizon agrees to accept from ATI ICG the date and time for the conversion designated on the LSR (“Scheduled Conversion Time”), provided that such designation is within the regularly scheduled operating hours of the Verizon Regional CLEC Control Center (“RCCC”) and subject to the availability of Verizon’s work force. In the event that XxxxxxxVerizon’s work force is not available, ATI ICG and Verizon shall mutually agree on a New Conversion Time, as defined below. ATI ICG shall designate the Scheduled Conversion Time subject to Verizon standard provisioning intervals as stated in the Verizon CLEC Handbook, as may be revised from time to time. Within three (3) Business Days of Verizon's receipt of such valid LSR, or as otherwise required by Applicable Law, Verizon shall provide ATI ICG the scheduled due date for conversion of the Analog 2W Loops covered by such LSR. 3.3.1.3 ATI 3.17.1.3 ICG shall provide dial tone at the ATI collocation ICG Collocation site at least forty-eight (48) hours prior to the Scheduled Conversion Time. 3.3.1.4 3.17.1.4 Either Party may contact the other Party to negotiate a new Scheduled Conversion Time (the “New Conversion Time”); provided, however, that each Party shall use commercially reasonable efforts to provide four (4) business hours’ advance notice to the other Party of its request for a New Conversion Time. Any Scheduled Conversion Time or New Conversion Time may not be rescheduled more than one (1) time in a Business Day, and any two New Conversion Times for a particular Analog 2W Loop Loops shall differ by at least eight (8) hours, unless otherwise agreed to by the Parties. 3.3.1.5 3.17.1.5 If the New Conversion Time is more than one (1) business hour from the original Scheduled Conversion Time or from the previous New Conversion Time, the Party requesting such New Conversion Time shall be subject to the following: 3.3.1.5.1 3.17.1.5.1 If Verizon requests to reschedule outside of the one (1) hour time frame above, the Analog 2W Loops Service Order Charge for the original Scheduled Conversion Time or the previous New Conversion Time shall be credited waived upon request from ATIICG; and 3.3.1.5.2 3.17.1.5.2 If ATI ICG requests to reschedule outside the one one (1) hour time frame above, ATI ICG shall be charged an additional Analog 2W Loops Service Order Charge for rescheduling the conversion to the New Conversion Time. 3.3.1.6 3.17.1.6 If ATI ICG is not ready to accept service at the Scheduled Conversion Time or at a New Conversion Time, as applicable, an additional Service Order Charge shall apply. If Verizon is not available or ready to perform the conversion within thirty (30) minutes of the Scheduled Conversion Time or New Conversion Time, as applicable, Verizon and ATI ICG will reschedule and, upon request from ATIICG, Verizon will credit waive the Analog 2W Loop Service Order Charge for the original Scheduled Conversion Time. 3.3.1.7 3.17.1.7 The standard time interval expected from disconnection of a live Telephone Exchange Service to the connection of the Analog 2W Loops to ATI ICG is fifteen (15) minutes per Analog 2W Loop for all orders consisting of twenty (20) Analog 2W Loops or less. Orders involving more than twenty (20) Loops will require a negotiated interval. 3.3.1.8 3.17.1.8 Conversions involving LNP will be completed according to North American Numbering Council (“NANC”) standards, via the regional Number Portability Administration Center (“NPAC”). 3.3.1.9 3.17.1.9 If ATI ICG requires Analog 2W Loop conversions outside of the regularly scheduled Verizon RCCC operating hours, such conversions shall be separately negotiated. Additional charges (e.g. overtime labor charges) may apply for desired dates and times outside of regularly scheduled RCCC operating hours.

Conversion of Live Telephone Exchange Service to Analog 2W Loops. 3.3.1 3.17.1 The following coordination procedures shall apply to “live” cutovers of Verizon Customers who are converting their Telephone Exchange Services to ATI Reconex Telephone Exchange Services provisioned over Analog 2W unbundled Local Loops (“Analog 2W Loops) to be provided by Verizon to ATIReconex: 3.3.1.1 3.17.1.1 Coordinated cutover charges shall apply to conversions of live Telephone Exchange Services to Analog 2W Loops. When an outside dispatch is required to perform a conversion, additional charges may apply. If ATI Reconex does not request a coordinated cutover, Verizon will process ATIReconex’s order as a new installation subject to applicable standard provisioning intervals. 3.3.1.2 ATI 3.17.1.2 Reconex shall request Analog 2W Loops for coordinated cutover from Verizon by delivering to Verizon a valid electronic Local Service Request (“LSR”). Xxxxxxx Verizon agrees to accept from ATI Reconex the date and time for the conversion designated on the LSR (“Scheduled Conversion Time”), provided that such designation is within the regularly scheduled operating hours of the Verizon Regional CLEC Control Center (“RCCC”) and subject to the availability of Verizon’s work force. In the event that XxxxxxxVerizon’s work force is not available, ATI Reconex and Verizon shall mutually agree on a New Conversion Time, as defined below. ATI Reconex shall designate the Scheduled Conversion Time subject to Verizon standard provisioning intervals as stated in the Verizon CLEC Handbook, as may be revised from time to time. Within three (3) Business Days of Verizon's receipt of such valid LSR, or as otherwise required by Applicable Law, Verizon shall provide ATI Reconex the scheduled due date for conversion of the Analog 2W Loops covered by such LSR. 3.3.1.3 ATI 3.17.1.3 Reconex shall provide dial tone at the ATI collocation Reconex Collocation site at least forty-eight (48) hours prior to the Scheduled Conversion Time. 3.3.1.4 3.17.1.4 Either Party may contact the other Party to negotiate a new Scheduled Conversion Time (the “New Conversion Time”); provided, however, that each Party shall use commercially reasonable efforts to provide four (4) business hours’ advance notice to the other Party of its request for a New Conversion Time. Any Scheduled Conversion Time or New Conversion Time may not be rescheduled more than one (1) time in a Business Day, and any two New Conversion Times for a particular Analog 2W Loop Loops shall differ by at least eight (8) hours, unless otherwise agreed to by the Parties. 3.3.1.5 3.17.1.5 If the New Conversion Time is more than one (1) business hour from the original Scheduled Conversion Time or from the previous New Conversion Time, the Party requesting such New Conversion Time shall be subject to the following: 3.3.1.5.1 3.17.1.5.1 If Verizon requests to reschedule outside of the one (1) hour time frame above, the Analog 2W Loops Service Order Charge for the original Scheduled Conversion Time or the previous New Conversion Time shall be credited waived upon request from ATIReconex; and 3.3.1.5.2 3.17.1.5.2 If ATI Reconex requests to reschedule outside the one (1) hour time frame above, ATI Reconex shall be charged an additional Analog 2W Loops Service Order Charge for rescheduling the conversion to the New Conversion Time. 3.3.1.6 3.17.1.6 If ATI Reconex is not ready to accept service at the Scheduled Conversion Time or at a New Conversion Time, as applicable, an additional Service Order Charge shall apply. If Verizon is not available or ready to perform the conversion within thirty (30) minutes of the Scheduled Conversion Time or New Conversion Time, as applicable, Verizon and ATI Reconex will reschedule and, upon request from ATIReconex, Verizon will credit waive the Analog 2W Loop Service Order Charge for the original Scheduled Conversion Time. 3.3.1.7 3.17.1.7 The standard time interval expected from disconnection of a live Telephone Exchange Service to the connection of the Analog 2W Loops to ATI Reconex is fifteen (15) minutes per Analog 2W Loop for all orders consisting of twenty (20) Analog 2W Loops or less. Orders involving more than twenty (20) Loops will require a negotiated interval. 3.3.1.8 3.17.1.8 Conversions involving LNP will be completed according to North American Numbering Council (“NANC”) standards, via the regional Number Portability Administration Center (“NPAC”). 3.3.1.9 3.17.1.9 If ATI Reconex requires Analog 2W Loop conversions outside of the regularly scheduled Verizon RCCC operating hours, such conversions shall be separately negotiated. Additional charges (e.g. overtime labor charges) may apply for desired dates and times outside of regularly scheduled RCCC operating hours.

Conversion of Live Telephone Exchange Service to Analog 2W Loops. 3.3.1 The following coordination procedures shall apply to “live” cutovers of Verizon BA Customers who are converting their Telephone Exchange Services to ATI Essex Telephone Exchange Services provisioned over Analog 2W unbundled Local Loops (“Analog 2W Loops's) to be provided by Verizon BA to ATI:Essex. 3.3.1.1 Coordinated 11.9.1 Subject to approval by the Commission, coordinated cutover charges shall apply to conversions of live Telephone Exchange Services to Analog 2W Loops. When an outside dispatch is required to perform a conversion, additional charges may apply. If ATI Essex does not request a coordinated cutover, Verizon BA will process ATIEssex’s order as a new installation subject to applicable standard provisioning intervals. 3.3.1.2 ATI 11.9.2 Essex shall request Analog 2W Loops Loop(s) for coordinated cutover from Verizon BA by delivering to Verizon BA a valid electronic Local Service Request (“LSR”). Xxxxxxx BA agrees to accept from ATI Essex the date and time for the conversion designated on the LSR (“Scheduled Conversion Time”), provided that such designation is within the regularly scheduled operating hours of the Verizon BA Regional CLEC Control Center (“RCCC”) and subject to the availability of VerizonBA’s work force. In the event that XxxxxxxBA’s work force is not available, ATI Essex and Verizon BA shall mutually agree on a New Conversion Time, as defined below. ATI Essex shall designate the Scheduled Conversion Time subject to Verizon BA standard provisioning intervals as stated in the Verizon BA CLEC Handbook, as may be revised from time to time. Within three two (32) Business Days business days of VerizonBA's receipt of such valid LSR, or as otherwise required by Applicable Law, Verizon BA shall provide ATI Essex the scheduled due firm order commitment (“FOC”) date for conversion of by which the Analog 2W Loops Loop(s) covered by such LSRLSR will be converted. 3.3.1.3 ATI 11.9.3 Essex shall provide dial tone at the ATI collocation Essex Collocation site at least forty-forty- eight (48) hours prior to the Scheduled Conversion Time. 3.3.1.4 11.9.4 Either Party may contact the other Party to negotiate a new Scheduled Conversion Time (the “New Conversion Time”); provided, however, that each Party shall use commercially reasonable efforts to provide four (4) business hours’ advance notice to the other Party of its request for a New Conversion Time. Any Scheduled Conversion Time or New Conversion Time may not be rescheduled more than one one (1) time in a Business Daybusiness day, and any two New Conversion Times for a particular Analog 2W Loop shall differ by at least eight (8) hours, unless otherwise agreed to by the Parties. 3.3.1.5 11.9.4.1 If the New Conversion Time is more than one (1) business hour from the original Scheduled Conversion Time or from the previous New Conversion Time, the Party requesting such New Conversion Time shall be subject to the following: 3.3.1.5.1 (i) If Verizon BA requests to reschedule outside of the one (1) hour time frame above, the Analog 2W Loops Loop Service Order Charge for the original Scheduled Conversion Time or the previous New Conversion Time shall be credited waived upon request from ATIEssex; and 3.3.1.5.2 (ii) If ATI Essex requests to reschedule outside the one (1) hour time frame above, ATI Essex shall be charged an additional Analog 2W Loops Loop Service Order Charge for rescheduling the conversion to the New Conversion Time.Time.‌‌‌ 3.3.1.6 11.9.5 If ATI Essex is not ready to accept service at the Scheduled Conversion Time or at a New Conversion Time, as applicable, an additional Service Order Charge shall apply. If Verizon BA is not available or ready to perform the conversion within thirty (30) minutes of the Scheduled Conversion Time or New Conversion Time, as applicable, Verizon BA and ATI Essex will reschedule and, upon request from ATIEssex, Verizon BA will credit waive the Analog 2W Loop Service Order Charge for the original Scheduled Conversion Time. 3.3.1.7 11.9.6 The standard time interval expected from disconnection of a live Telephone Exchange Service to the connection of the Analog 2W Loops Loop to ATI Essex is fifteen (15) minutes per Analog 2W Loop for all orders consisting of twenty (20) Analog 2W Loops or less. Orders involving more than twenty (20) Loops will require a negotiated interval. 3.3.1.8 11.9.7 Conversions involving LNP will be completed according to North American Numbering Council (“NANC”) standards, via the regional Number Portability Administration Center (“NPAC”). 3.3.1.9 11.9.8 If ATI Essex requires Analog 2W Loop conversions outside of the regularly scheduled Verizon BA RCCC operating hours, such conversions shall be separately negotiated. Additional charges (e.g. overtime labor charges) may apply for desired dates and times outside of regularly scheduled RCCC operating hours.

Conversion of Live Telephone Exchange Service to Analog 2W Loops. 3.3.1 The following coordination procedures shall apply to “live” cutovers of Verizon Customers who are converting their Telephone Exchange Services to ATI McGraw Telephone Exchange Services provisioned over Analog 2W unbundled Local Loops (“Analog 2W Loops) to be provided by Verizon to ATIMcGraw: 3.3.1.1 Coordinated cutover charges shall apply to conversions of live Telephone Exchange Services to Analog 2W Loops. When an outside dispatch is required to perform a conversion, additional charges may apply. If ATI XxXxxx does not request a coordinated cutover, Verizon will process ATIMcGraw’s order as a new installation subject to applicable standard provisioning intervals. 3.3.1.2 ATI McGraw shall request Analog 2W Loops for coordinated cutover from Verizon by delivering to Verizon a valid electronic Local Service Request (“LSR”). Xxxxxxx agrees to accept from ATI McGraw the date and time for the conversion designated on the LSR (“Scheduled Conversion Time”), provided that such designation is within the regularly scheduled operating hours of the Verizon Regional CLEC Control Center (“RCCC”) and subject to the availability of Verizon’s work force. In the event that Xxxxxxx’s work force is not available, ATI XxXxxx and Verizon shall mutually agree on a New Conversion Time, as defined below. ATI XxXxxx shall designate the Scheduled Conversion Time subject to Verizon standard provisioning intervals as stated in the Verizon CLEC Handbook, as may be revised from time to time. Within three (3) Business Days of Verizon's receipt of such valid LSR, or as otherwise required by Applicable Law, Verizon shall provide ATI McGraw the scheduled due date for conversion of the Analog 2W Loops covered by such LSR. 3.3.1.3 ATI McGraw shall provide dial tone at the ATI McGraw collocation site at least forty-eight (48) hours prior to the Scheduled Conversion Time. 3.3.1.4 Either Party may contact the other Party to negotiate a new Scheduled Conversion Time (the “New Conversion Time”); provided, however, that each Party shall use commercially reasonable efforts to provide four (4) business hours’ advance notice to the other Party of its request for a New Conversion Time. Any Scheduled Conversion Time or New Conversion Time may not be rescheduled more than one (1) time in a Business Day, and any two New Conversion Times for a particular Analog 2W Loop shall differ by at least eight (8) hours, unless otherwise agreed to by the Parties. 3.3.1.5 If the New Conversion Time is more than one (1) business hour from the original Scheduled Conversion Time or from the previous New Conversion Time, the Party requesting such New Conversion Time shall be subject to the following: 3.3.1.5.1 If Verizon requests to reschedule outside of the one (1) hour time frame above, the Analog 2W Loops Service Order Charge for the original Scheduled Conversion Time or the previous New Conversion Time shall be credited upon request from ATIXxXxxx; and 3.3.1.5.2 If ATI XxXxxx requests to reschedule outside the one (1) hour time frame above, ATI XxXxxx shall be charged an additional Analog 2W Loops Service Order Charge for rescheduling the conversion to the New Conversion Time. 3.3.1.6 If ATI McGraw is not ready to accept service at the Scheduled Conversion Time or at a New Conversion Time, as applicable, an additional Service Order Charge shall apply. If Verizon is not available or ready to perform the conversion within thirty (30) minutes of the Scheduled Conversion Time or New Conversion Time, as applicable, Verizon and ATI XxXxxx will reschedule and, upon request from ATIXxXxxx, Verizon will credit the Analog 2W Loop Service Order Charge for the original Scheduled Conversion Time. 3.3.1.7 The standard time interval expected from disconnection of a live Telephone Exchange Service to the connection of the Analog 2W Loops to ATI McGraw is fifteen (15) minutes per Analog 2W Loop for all orders consisting of twenty (20) Analog 2W Loops or less. Orders involving more than twenty (20) Loops will require a negotiated interval. 3.3.1.8 Conversions involving LNP will be completed according to North American Numbering Council (NANC) standards, via the regional Number Portability Administration Center (NPAC). 3.3.1.9 If ATI McGraw requires Analog 2W Loop conversions outside of the regularly scheduled Verizon RCCC operating hours, such conversions shall be separately negotiated. Additional charges (e.g. overtime labor charges) may apply for desired dates and times outside of regularly scheduled RCCC operating hours.

Conversion of Live Telephone Exchange Service to Analog 2W Loops. 3.3.1 3.17.1 The following coordination procedures shall apply to “live” cutovers of Verizon Customers who are converting their Telephone Exchange Services to ATI SBCT Telephone Exchange Services provisioned over Analog 2W unbundled Local Loops (“Analog 2W Loops) to be provided by Verizon to ATISBCT: 3.3.1.1 3.17.1.1 Coordinated cutover charges shall apply to conversions of live Telephone Exchange Services to Analog 2W Loops. When an outside dispatch is required to perform a conversion, additional charges may apply. If ATI SBCT does not request a coordinated cutover, Verizon will process ATISBCT’s order as a new installation subject to applicable standard provisioning intervals. 3.3.1.2 ATI 3.17.1.2 SBCT shall request Analog 2W Loops for coordinated cutover from Verizon by delivering to Verizon a valid electronic Local Service Request (“LSR”). Xxxxxxx Verizon agrees to accept from ATI SBCT the date and time for the conversion designated on the LSR (“Scheduled Conversion Time”), provided that such designation is within the regularly scheduled operating hours of the Verizon Regional CLEC Control Center (“RCCC”) and subject to the availability of Verizon’s work force. In the event that XxxxxxxVerizon’s work force is not available, ATI SBCT and Verizon shall mutually agree on a New Conversion Time, as defined below. ATI SBCT shall designate the Scheduled Conversion Time subject to Verizon standard provisioning intervals as stated in the Verizon CLEC Handbook, as may be revised from time to time. Within three (3) Business Days of Verizon's receipt of such valid LSR, or as otherwise required by Applicable Law, The intervals provided in the Verizon shall provide ATI the scheduled due date for conversion of the Analog 2W Loops covered by such LSR. 3.3.1.3 ATI shall provide dial tone at the ATI collocation site at least forty-eight (48) hours prior to the Scheduled Conversion Time. 3.3.1.4 Either Party may contact the other Party to negotiate a new Scheduled Conversion Time (the “New Conversion Time”); provided, however, that each Party shall use commercially reasonable efforts to provide four (4) business hours’ advance notice to the other Party of its request for a New Conversion Time. Any Scheduled Conversion Time or New Conversion Time may not be rescheduled more than one (1) time in a Business Day, and any two New Conversion Times for a particular Analog 2W Loop shall differ by at least eight (8) hours, unless otherwise agreed to by the Parties. 3.3.1.5 If the New Conversion Time is more than one (1) business hour from the original Scheduled Conversion Time or from the previous New Conversion Time, the Party requesting such New Conversion Time CLEC Handbook shall be subject equal to the following: 3.3.1.5.1 If those which Verizon requests to reschedule outside of the one (1) hour time frame above, the Analog 2W Loops Service Order Charge for the original Scheduled Conversion Time or the previous New Conversion Time shall be credited upon request from ATI; and 3.3.1.5.2 If ATI requests to reschedule outside the one (1) hour time frame above, ATI shall be charged an additional Analog 2W Loops Service Order Charge for rescheduling the conversion to the New Conversion Time. 3.3.1.6 If ATI is not ready to accept provisions service at the Scheduled Conversion Time or at a New Conversion Time, as applicable, an additional Service Order Charge shall apply. If Verizon is not available or ready to perform the conversion within thirty (30) minutes of the Scheduled Conversion Time or New Conversion Time, as applicable, Verizon and ATI will reschedule and, upon request from ATI, Verizon will credit the Analog 2W Loop Service Order Charge for the original Scheduled Conversion Time. 3.3.1.7 The standard time interval expected from disconnection of a live Telephone Exchange Service to the connection of the Analog 2W Loops to ATI is fifteen (15) minutes per Analog 2W Loop for all orders consisting of twenty (20) Analog 2W Loops or less. Orders involving more than twenty (20) Loops will require a negotiated interval. 3.3.1.8 Conversions involving LNP will be completed according to North American Numbering Council (NANC) standards, via the regional Number Portability Administration Center (NPAC). 3.3.1.9 If ATI requires Analog 2W Loop conversions outside of the regularly scheduled Verizon RCCC operating hours, such conversions shall be separately negotiated. Additional charges (e.g. overtime labor charges) may apply for desired dates and times outside of regularly scheduled RCCC operating hours.to

Conversion of Live Telephone Exchange Service to Analog 2W Loops. 3.3.1 The following coordination procedures shall apply to “live” cutovers of Verizon Customers who are converting their Telephone Exchange Services to ATI Ymax Telephone Exchange Services provisioned over Analog 2W unbundled Local Loops (“Analog 2W Loops) to be provided by Verizon to ATIYmax: 3.3.1.1 Coordinated cutover charges shall apply to conversions of live Telephone Exchange Services to Analog 2W Loops. When an outside dispatch is required to perform a conversion, additional charges may apply. If ATI Ymax does not request a coordinated cutover, Verizon will process ATIYmax’s order as a new installation subject to applicable standard provisioning intervals. 3.3.1.2 ATI Ymax shall request Analog 2W Loops for coordinated cutover from Verizon by delivering to Verizon a valid electronic Local Service Request (“LSR”). Xxxxxxx Verizon agrees to accept from ATI Ymax the date and time for the conversion designated on the LSR (“Scheduled Conversion Time”), provided that such designation is within the regularly scheduled operating hours of the Verizon Regional CLEC Control Center (“RCCC”) and subject to the availability of Verizon’s work force. In the event that XxxxxxxVerizon’s work force is not available, ATI Ymax and Verizon shall mutually agree on a New Conversion Time, as defined below. ATI Ymax shall designate the Scheduled Conversion Time subject to Verizon standard provisioning intervals as stated in the Verizon CLEC Handbook, as may be revised from time to time. Within three (3) Business Days of Verizon's receipt of such valid LSR, or as otherwise required by Applicable Law, Verizon shall provide ATI Ymax the scheduled due date for conversion of the Analog 2W Loops covered by such LSR. 3.3.1.3 ATI Ymax shall provide dial tone at the ATI Ymax collocation site at least forty-eight (48) hours prior to the Scheduled Conversion Time. 3.3.1.4 Either Party may contact the other Party to negotiate a new Scheduled Conversion Time (the “New Conversion Time”); provided, however, that each Party shall use commercially reasonable efforts to provide four (4) business hours’ advance notice to the other Party of its request for a New Conversion Time. Any Scheduled Conversion Time or New Conversion Time may not be rescheduled more than one (1) time in a Business Day, and any two New Conversion Times for a particular Analog 2W Loop shall differ by at least eight (8) hours, unless otherwise agreed to by the Parties. 3.3.1.5 If the New Conversion Time is more than one (1) business hour from the original Scheduled Conversion Time or from the previous New Conversion Time, the Party requesting such New Conversion Time shall be subject to the following: 3.3.1.5.1 If Verizon requests to reschedule outside of the one (1) hour time frame above, the Analog 2W Loops Service Order Charge for the original Scheduled Conversion Time or the previous New Conversion Time shall be credited upon request from ATIYmax; and 3.3.1.5.2 If ATI Ymax requests to reschedule outside the one one (1) hour time frame above, ATI Ymax shall be charged an additional Analog 2W Loops Service Order Charge for rescheduling the conversion to the New Conversion Time. 3.3.1.6 If ATI Ymax is not ready to accept service at the Scheduled Conversion Time or at a New Conversion Time, as applicable, an additional Service Order Charge shall apply. If Verizon is not available or ready to perform the conversion within thirty (30) minutes of the Scheduled Conversion Time or New Conversion Time, as applicable, Verizon and ATI Ymax will reschedule and, upon request from ATIYmax, Verizon will credit the Analog 2W Loop Service Order Charge for the original Scheduled Conversion Time. 3.3.1.7 The standard time interval expected from disconnection of a live Telephone Exchange Service to the connection of the Analog 2W Loops to ATI Ymax is fifteen (15) minutes per Analog 2W Loop for all orders consisting of twenty (20) Analog 2W Loops or less. Orders involving more than twenty (20) Loops will require a negotiated interval. 3.3.1.8 Conversions involving LNP will be completed according to North American Numbering Council (NANC) standards, via the regional Number Portability Administration Center (NPAC). 3.3.1.9 If ATI Ymax requires Analog 2W Loop conversions outside of the regularly scheduled Verizon RCCC operating hours, such conversions shall be separately negotiated. Additional charges (e.g. overtime labor charges) may apply for desired dates and times outside of regularly scheduled RCCC operating hours.

Conversion of Live Telephone Exchange Service to Analog 2W Loops. 3.3.1 The following coordination procedures shall apply to “live” cutovers of Verizon Customers who are converting their Telephone Exchange Services to ATI PNG Telephone Exchange Services provisioned over Analog 2W unbundled Local Loops (“Analog 2W Loops) to be provided by Verizon to ATIPNG: 3.3.1.1 Coordinated cutover charges shall apply to conversions of live Telephone Exchange Services to Analog 2W Loops. When an outside dispatch is required to perform a conversion, additional charges may apply. If ATI PNG does not request a coordinated cutover, Verizon will process ATIPNG’s order as a new installation subject to applicable standard provisioning intervals. 3.3.1.2 ATI PNG shall request Analog 2W Loops for coordinated cutover from Verizon by delivering to Verizon a valid electronic Local Service Request (“LSR”). Xxxxxxx Verizon agrees to accept from ATI PNG the date and time for the conversion designated on the LSR (“Scheduled Conversion Time”), provided that such designation is within the regularly scheduled operating hours of the Verizon Regional CLEC Control Center (“RCCC”) and subject to the availability of Verizon’s work force. In the event that Xxxxxxx’s work force is not available, ATI PNG and Verizon shall mutually agree on a New Conversion Time, as defined below. ATI PNG shall designate the Scheduled Conversion Time subject to Verizon standard provisioning intervals as stated in the Verizon CLEC Handbook, as may be revised from time to time. Within three (3) Business Days of Verizon's receipt of such valid LSR, or as otherwise required by Applicable Law, Verizon shall provide ATI PNG the scheduled due date for conversion of the Analog 2W Loops covered by such LSR. 3.3.1.3 ATI PNG shall provide dial tone at the ATI collocation PNG Collocation site at least forty-eight (48) hours prior to the Scheduled Conversion Time. 3.3.1.4 Either Party may contact the other Party to negotiate a new Scheduled Conversion Time (the “New Conversion Time”); provided, however, that each Party shall use commercially reasonable efforts to provide four (4) business hours’ advance notice to the other Party of its request for a New Conversion Time. Any Scheduled Conversion Time or New Conversion Time may not be rescheduled more than one (1) time in a Business Day, and any two New Conversion Times for a particular Analog 2W Loop shall differ by at least eight (8) hours, unless otherwise agreed to by the Parties. 3.3.1.5 If the New Conversion Time is more than one (1) business hour from the original Scheduled Conversion Time or from the previous New Conversion Time, the Party requesting such New Conversion Time shall be subject to the following: 3.3.1.5.1 If Verizon requests to reschedule outside of the one (1) hour time frame above, the Analog 2W Loops Service Order Charge for the original Scheduled Conversion Time or the previous New Conversion Time shall be credited upon request from ATIPNG; and 3.3.1.5.2 If ATI PNG requests to reschedule outside the one one (1) hour time frame above, ATI PNG shall be charged an additional Analog 2W Loops Service Order Charge for rescheduling the conversion to the New Conversion Time. 3.3.1.6 If ATI PNG is not ready to accept service at the Scheduled Conversion Time or at a New Conversion Time, as applicable, an additional Service Order Charge shall apply. If Verizon is not available or ready to perform the conversion within thirty (30) minutes of the Scheduled Conversion Time or New Conversion Time, as applicable, Verizon and ATI PNG will reschedule and, upon request from ATIPNG, Verizon will credit the Analog 2W Loop Service Order Charge for the original Scheduled Conversion Time. 3.3.1.7 The standard time interval expected from disconnection of a live Telephone Exchange Service to the connection of the Analog 2W Loops to ATI PNG is fifteen (15) minutes per Analog 2W Loop for all orders consisting of twenty (20) Analog 2W Loops or less. Orders involving more than twenty (20) Loops will require a negotiated interval. 3.3.1.8 Conversions involving LNP will be completed according to North American Numbering Council (NANC) standards, via the regional Number Portability Administration Center (NPAC). 3.3.1.9 If ATI PNG requires Analog 2W Loop conversions outside of the regularly scheduled Verizon RCCC operating hours, such conversions shall be separately negotiated. Additional charges (e.g. overtime labor charges) may apply for desired dates and times outside of regularly scheduled RCCC operating hours.

Conversion of Live Telephone Exchange Service to Analog 2W Loops. 3.3.1 3.17.1 The following coordination procedures shall apply to “live” cutovers of Verizon Customers who are converting their Telephone Exchange Services to ATI ReFlex Telephone Exchange Services provisioned over Analog 2W unbundled Local Loops (“Analog 2W Loops) to be provided by Verizon to ATIReFlex: 3.3.1.1 3.17.1.1 Coordinated cutover charges shall apply to conversions of live Telephone Exchange Services to Analog 2W Loops. When an outside dispatch is required to perform a conversion, additional charges may apply. If ATI ReFlex does not request a coordinated cutover, Verizon will process ATIReFlex’s order as a new installation subject to applicable standard provisioning intervals. 3.3.1.2 ATI 3.17.1.2 ReFlex shall request Analog 2W Loops for coordinated cutover from Verizon by delivering to Verizon a valid electronic Local Service Request (“LSR”). Xxxxxxx agrees to accept from ATI ReFlex the date and time for the conversion designated on the LSR (“Scheduled Conversion Time”), provided that such designation is within the regularly scheduled operating hours of the Verizon Regional CLEC Control Center (“RCCC”) and subject to the availability of Verizon’s work force. In the event that Xxxxxxx’s work force is not available, ATI ReFlex and Verizon shall mutually agree on a New Conversion Time, as defined below. ATI ReFlex shall designate the Scheduled Conversion Time subject to Verizon standard provisioning intervals as stated in the Verizon CLEC Handbook, as may be revised from time to time. Within three (3) Business Days business days of Verizon's receipt of such valid LSR, or as otherwise required by Applicable Law, Verizon shall provide ATI ReFlex the scheduled due date for conversion of the Analog 2W Loops covered by such LSR. 3.3.1.3 ATI 3.17.1.3 ReFlex shall provide dial tone at the ATI collocation ReFlex Collocation site at least forty-eight (48) hours prior to the Scheduled Conversion Time. 3.3.1.4 3.17.1.4 Either Party may contact the other Party to negotiate a new Scheduled Conversion Time (the “New Conversion Time”); provided, however, that each Party shall use commercially reasonable efforts to provide four (4) business hours’ advance notice to the other Party of its request for a New Conversion Time. Any Scheduled Conversion Time or New Conversion Time may not be rescheduled more than one one (1) time in a Business Daybusiness day, and any two New Conversion Times for a particular Analog 2W Loop Loops shall differ by at least eight (8) hours, unless otherwise agreed to by the Parties. 3.3.1.5 3.17.1.5 If the New Conversion Time is more than one (1) business hour from the original Scheduled Conversion Time or from the previous New Conversion Time, the Party requesting such New Conversion Time shall be subject to the following: 3.3.1.5.1 3.17.1.5.1 If Verizon requests to reschedule outside of the one (1) hour time frame above, the Analog 2W Loops Service Order Charge for the original Scheduled Conversion Time or the previous New Conversion Time shall be credited waived upon request from ATIReFlex; and 3.3.1.5.2 3.17.1.5.2 If ATI ReFlex requests to reschedule outside the one one (1) hour time frame above, ATI ReFlex shall be charged an additional Analog 2W Loops Service Order Charge for rescheduling the conversion to the New Conversion Time. 3.3.1.6 3.17.1.6 If ATI ReFlex is not ready to accept service at the Scheduled Conversion Time or at a New Conversion Time, as applicable, an additional Service Order Charge shall apply. If Verizon is not available or ready to perform the conversion within thirty (30) minutes of the Scheduled Conversion Time or New Conversion Time, as applicable, Verizon and ATI will reschedule and, upon request from ATI, Verizon will credit the Analog 2W Loop Service Order Charge for the original Scheduled Conversion Time. 3.3.1.7 The standard time interval expected from disconnection of a live Telephone Exchange Service to the connection of the Analog 2W Loops to ATI is fifteen (15) minutes per Analog 2W Loop for all orders consisting of twenty (20) Analog 2W Loops or less. Orders involving more than twenty (20) Loops will require a negotiated interval. 3.3.1.8 Conversions involving LNP will be completed according to North American Numbering Council (NANC) standards, via the regional Number Portability Administration Center (NPAC). 3.3.1.9 If ATI requires Analog 2W Loop conversions outside of the regularly scheduled Verizon RCCC operating hours, such conversions shall be separately negotiated. Additional charges (e.g. overtime labor charges) may apply for desired dates and times outside of regularly scheduled RCCC operating hours.thirty

Conversion of Live Telephone Exchange Service to Analog 2W Loops. 3.3.1 The following coordination procedures shall apply to “live” cutovers of Verizon Customers who are converting their Telephone Exchange Services to ATI CSTC Telephone Exchange Services provisioned over Analog 2W unbundled Local Loops (“Analog 2W Loops) to be provided by Verizon to ATICSTC: 3.3.1.1 Coordinated cutover charges shall apply to conversions of live Telephone Exchange Services to Analog 2W Loops. When an outside dispatch is required to perform a conversion, additional charges may apply. If ATI CSTC does not request a coordinated cutover, Verizon will process ATICSTC’s order as a new installation subject to applicable standard provisioning intervals. 3.3.1.2 ATI CSTC shall request Analog 2W Loops for coordinated cutover from Verizon by delivering to Verizon a valid electronic Local Service Request (“LSR”). Xxxxxxx Verizon agrees to accept from ATI CSTC the date and time for the conversion designated on the LSR (“Scheduled Conversion Time”), provided that such designation is within the regularly scheduled operating hours of the Verizon Regional CLEC Control Center (“RCCC”) and subject to the availability of Verizon’s work force. In the event that XxxxxxxVerizon’s work force is not available, ATI CSTC and Verizon shall mutually agree on a New Conversion Time, as defined below. ATI CSTC shall designate the Scheduled Conversion Time subject to Verizon standard provisioning intervals as stated in the Verizon CLEC Handbook, as may be revised from time to time. Within three (3) Business Days of Verizon's receipt of such valid LSR, or as otherwise required by Applicable Law, Verizon shall provide ATI CSTC the scheduled due date for conversion of the Analog 2W Loops covered by such LSR. 3.3.1.3 ATI CSTC shall provide dial tone at the ATI collocation CSTC Collocation site at least forty-eight (48) hours prior to the Scheduled Conversion Time. 3.3.1.4 Either Party may contact the other Party to negotiate a new Scheduled Conversion Time (the “New Conversion Time”); provided, however, that each Party shall use commercially reasonable efforts to provide four (4) business hours’ advance notice to the other Party of its request for a New Conversion Time. Any Scheduled Conversion Time or New Conversion Time may not be rescheduled more than one (1) time in a Business Day, and any two New Conversion Times for a particular Analog 2W Loop shall differ by at least eight (8) hours, unless otherwise agreed to by the Parties. 3.3.1.5 If the New Conversion Time is more than one (1) business hour from the original Scheduled Conversion Time or from the previous New Conversion Time, the Party requesting such New Conversion Time shall be subject to the following: 3.3.1.5.1 If Verizon requests to reschedule outside of the one (1) hour time frame above, the Analog 2W Loops Service Order Charge for the original Scheduled Conversion Time or the previous New Conversion Time shall be credited upon request from ATICSTC; and 3.3.1.5.2 If ATI CSTC requests to reschedule outside the one one (1) hour time frame above, ATI CSTC shall be charged an additional Analog 2W Loops Service Order Charge for rescheduling the conversion to the New Conversion Time. 3.3.1.6 If ATI CSTC is not ready to accept service at the Scheduled Conversion Time or at a New Conversion Time, as applicable, an additional Service Order Charge shall apply. If Verizon is not available or ready to perform the conversion within thirty (30) minutes of the Scheduled Conversion Time or New Conversion Time, as applicable, Verizon and ATI CSTC will reschedule and, upon request from ATICSTC, Verizon will credit the Analog 2W Loop Service Order Charge for the original Scheduled Conversion Time. 3.3.1.7 The standard time interval expected from disconnection of a live Telephone Exchange Service to the connection of the Analog 2W Loops to ATI CSTC is fifteen (15) minutes per Analog 2W Loop for all orders consisting of twenty (20) Analog 2W Loops or less. Orders involving more than twenty (20) Loops will require a negotiated interval. 3.3.1.8 Conversions involving LNP will be completed according to North American Numbering Council (NANC) standards, via the regional Number Portability Administration Center (NPAC). 3.3.1.9 If ATI CSTC requires Analog 2W Loop conversions outside of the regularly scheduled Verizon RCCC operating hours, such conversions shall be separately negotiated. Additional charges (e.g. overtime labor charges) may apply for desired dates and times outside of regularly scheduled RCCC operating hours.

Conversion of Live Telephone Exchange Service to Analog 2W Loops. 3.3.1 The following coordination procedures shall apply to “live” cutovers of Verizon Customers who are converting their Telephone Exchange Services to ATI NUI Telephone Exchange Services provisioned over Analog 2W unbundled Local Loops (“Analog 2W Loops) to be provided by Verizon to ATINUI: 3.3.1.1 Coordinated cutover charges shall apply to conversions of live Telephone Exchange Services to Analog 2W Loops. When an outside dispatch is required to perform a conversion, additional charges may apply. If ATI NUI does not request a coordinated cutover, Verizon will process ATINUI’s order as a new installation subject to applicable standard provisioning intervals. 3.3.1.2 ATI NUI shall request Analog 2W Loops for coordinated cutover from Verizon by delivering to Verizon a valid electronic Local Service Request (“LSR”). Xxxxxxx Verizon agrees to accept from ATI NUI the date and time for the conversion designated on the LSR (“Scheduled Conversion Time”), provided that such designation is within the regularly scheduled operating hours of the Verizon Regional CLEC Control Center (“RCCC”) and subject to the availability of Verizon’s work force. In the event that XxxxxxxVerizon’s work force is not available, ATI NUI and Verizon shall mutually agree on a New Conversion Time, as defined below. ATI NUI shall designate the Scheduled Conversion Time subject to Verizon standard provisioning intervals as stated in the Verizon CLEC Handbook, as may be revised from time to time. Within three (3) Business Days of Verizon's ’s receipt of such valid LSR, or as otherwise required by Applicable Law, Verizon shall provide ATI NUI the scheduled due date for conversion of the Analog 2W Loops covered by such LSR. 3.3.1.3 ATI NUI shall provide dial tone at the ATI collocation NUI Collocation site at least forty-eight (48) hours prior to the Scheduled Conversion Time. 3.3.1.4 Either Party may contact the other Party to negotiate a new Scheduled Conversion Time (the “New Conversion Time”); provided, however, that each Party shall use commercially reasonable efforts to provide four (4) business hours’ advance notice to the other Party of its request for a New Conversion Time. Any Scheduled Conversion Time or New Conversion Time may not be rescheduled more than one one (1) time in a Business Day, and any two New Conversion Times for a particular Analog 2W Loop shall differ by at least eight (8) hours, unless otherwise agreed to by the Parties. 3.3.1.5 If the New Conversion Time is more than one (1) business hour from the original Scheduled Conversion Time or from the previous New Conversion Time, the Party requesting such New Conversion Time shall be subject to the following: 3.3.1.5.1 If Verizon requests to reschedule outside of the one (1) hour time frame above, the Analog 2W Loops Service Order Charge for the original Scheduled Conversion Time or the previous New Conversion Time shall be credited upon request from ATINUI; and 3.3.1.5.2 If ATI NUI requests to reschedule outside the one (1) hour time frame above, ATI NUI shall be charged an additional Analog 2W Loops Service Order Charge for rescheduling the conversion to the New Conversion Time. 3.3.1.6 If ATI NUI is not ready to accept service at the Scheduled Conversion Time or at a New Conversion Time, as applicable, an additional Service Order Charge shall apply. If Verizon is not available or ready to perform the conversion within thirty (30) minutes of the Scheduled Conversion Time or New Conversion Time, as applicable, Verizon and ATI NUI will reschedule and, upon request from ATINUI, Verizon will credit the Analog 2W Loop Service Order Charge for the original Scheduled Conversion Time. 3.3.1.7 The standard time interval expected from disconnection of a live Telephone Exchange Service to the connection of the Analog 2W Loops to ATI NUI is fifteen (15) minutes per Analog 2W Loop for all orders consisting of twenty (20) Analog 2W Loops or less. Orders involving more than twenty (20) Loops will require a negotiated interval. 3.3.1.8 Conversions involving LNP will be completed according to North American Numbering Council (NANC) standards, via the regional Number Portability Administration Center (NPAC). 3.3.1.9 If ATI NUI requires Analog 2W Loop conversions outside of the regularly scheduled Verizon RCCC operating hours, such conversions shall be separately negotiated. Additional charges (e.g. overtime labor charges) may apply for desired dates and times outside of regularly scheduled RCCC operating hours.

Conversion of Live Telephone Exchange Service to Analog 2W Loops. 3.3.1 The following coordination procedures shall apply to “live” cutovers of Verizon Customers who are converting their Telephone Exchange Services to ATI NL Telephone Exchange Services provisioned over Analog 2W unbundled Local Loops (“Analog 2W Loops) to be provided by Verizon to ATINL: 3.3.1.1 Coordinated cutover charges shall apply to conversions of live Telephone Exchange Services to Analog 2W Loops. When an outside dispatch is required to perform a conversion, additional charges may apply. If ATI NL does not request a coordinated cutover, Verizon will process ATINL’s order as a new installation subject to applicable standard provisioning intervals. 3.3.1.2 ATI NL shall request Analog 2W Loops for coordinated cutover from Verizon by delivering to Verizon a valid electronic Local Service Request (“LSR”). Xxxxxxx Verizon agrees to accept from ATI NL the date and time for the conversion designated on the LSR (“Scheduled Conversion Time”), provided that such designation is within the regularly scheduled operating hours of the Verizon Regional CLEC Control Center (“RCCC”) and subject to the availability of Verizon’s work force. In the event that XxxxxxxVerizon’s work force is not available, ATI NL and Verizon shall mutually agree on a New Conversion Time, as defined below. ATI NL shall designate the Scheduled Conversion Time subject to Verizon standard provisioning intervals as stated in the Verizon CLEC Handbook, as may be revised from time to time. Within three (3) Business Days of Verizon's receipt of such valid LSR, or as otherwise required by Applicable Law, Verizon shall provide ATI NL the scheduled due date for conversion of the Analog 2W Loops covered by such LSR. 3.3.1.3 ATI NL shall provide dial tone at the ATI NL collocation site at least forty-eight (48) hours prior to the Scheduled Conversion Time. 3.3.1.4 Either Party may contact the other Party to negotiate a new Scheduled Conversion Time (the “New Conversion Time”); provided, however, that each Party shall use commercially reasonable efforts to provide four (4) business hours’ advance notice to the other Party of its request for a New Conversion Time. Any Scheduled Conversion Time or New Conversion Time may not be rescheduled more than one (1) time in a Business Day, and any two New Conversion Times for a particular Analog 2W Loop shall differ by at least eight (8) hours, unless otherwise agreed to by the Parties. 3.3.1.5 If the New Conversion Time is more than one (1) business hour from the original Scheduled Conversion Time or from the previous New Conversion Time, the Party requesting such New Conversion Time shall be subject to the following: 3.3.1.5.1 If Verizon requests to reschedule outside of the one (1) hour time frame above, the Analog 2W Loops Service Order Charge for the original Scheduled Conversion Time or the previous New Conversion Time shall be credited upon request from ATINL; and 3.3.1.5.2 If ATI NL requests to reschedule outside the one (1) hour time frame above, ATI NL shall be charged an additional Analog 2W Loops Service Order Charge for rescheduling the conversion to the New Conversion Time. 3.3.1.6 If ATI NL is not ready to accept service at the Scheduled Conversion Time or at a New Conversion Time, as applicable, an additional Service Order Charge shall apply. If Verizon is not available or ready to perform the conversion within thirty (30) minutes of the Scheduled Conversion Time or New Conversion Time, as applicable, Verizon and ATI NL will reschedule and, upon request from ATINL, Verizon will credit the Analog 2W Loop Service Order Charge for the original Scheduled Conversion Time. 3.3.1.7 The standard time interval expected from disconnection of a live Telephone Exchange Service to the connection of the Analog 2W Loops to ATI NL is fifteen (15) minutes per Analog 2W Loop for all orders consisting of twenty (20) Analog 2W Loops or less. Orders involving more than twenty (20) Loops will require a negotiated interval. 3.3.1.8 Conversions involving LNP will be completed according to North American Numbering Council (NANC) standards, via the regional Number Portability Administration Center (NPAC). 3.3.1.9 If ATI NL requires Analog 2W Loop conversions outside of the regularly scheduled Verizon RCCC operating hours, such conversions shall be separately negotiated. Additional charges (e.g. overtime labor charges) may apply for desired dates and times outside of regularly scheduled RCCC operating hours.

Conversion of Live Telephone Exchange Service to Analog 2W Loops. 3.3.1 The following coordination procedures shall apply to “live” cutovers of Verizon Customers who are converting their Telephone Exchange Services to ATI Northstar Telephone Exchange Services provisioned over Analog 2W unbundled Local Loops (“Analog 2W Loops) to be provided by Verizon to ATINorthstar: 3.3.1.1 Coordinated cutover charges shall apply to conversions of live Telephone Exchange Services to Analog 2W Loops. When an outside dispatch is required to perform a conversion, additional charges may apply. If ATI Northstar does not request a coordinated cutover, Verizon will process ATINorthstar’s order as a new installation subject to applicable standard provisioning intervals. 3.3.1.2 ATI Northstar shall request Analog 2W Loops for coordinated cutover from Verizon by delivering to Verizon a valid electronic Local Service Request (“LSR”). Xxxxxxx agrees to accept from ATI Northstar the date and time for the conversion designated on the LSR (“Scheduled Conversion Time”), provided that such designation is within the regularly scheduled operating hours of the Verizon Regional CLEC Control Center (“RCCC”) and subject to the availability of Verizon’s work force. In the event that Xxxxxxx’s work force is not available, ATI Northstar and Verizon shall mutually agree on a New Conversion Time, as defined below. ATI Northstar shall designate the Scheduled Conversion Time subject to Verizon standard provisioning intervals as stated in the Verizon CLEC Handbook, as may be revised from time to time. Within three (3) Business Days of Verizon's receipt of such valid LSR, or as otherwise required by Applicable Law, Verizon shall provide ATI Northstar the scheduled due date for conversion of the Analog 2W Loops covered by such LSR. 3.3.1.3 ATI Northstar shall provide dial tone at the ATI Northstar collocation site at least forty-eight (48) hours prior to the Scheduled Conversion Time. 3.3.1.4 Either Party may contact the other Party to negotiate a new Scheduled Conversion Time (the “New Conversion Time”); provided, however, that each Party shall use commercially reasonable efforts to provide four (4) business hours’ advance notice to the other Party of its request for a New Conversion Time. Any Scheduled Conversion Time or New Conversion Time may not be rescheduled more than one (1) time in a Business Day, and any two New Conversion Times for a particular Analog 2W Loop shall differ by at least eight (8) hours, unless otherwise agreed to by the Parties. 3.3.1.5 If the New Conversion Time is more than one (1) business hour from the original Scheduled Conversion Time or from the previous New Conversion Time, the Party requesting such New Conversion Time shall be subject to the following: 3.3.1.5.1 If Verizon requests to reschedule outside of the one (1) hour time frame above, the Analog 2W Loops Service Order Charge for the original Scheduled Conversion Time or the previous New Conversion Time shall be credited upon request from ATINorthstar; and 3.3.1.5.2 If ATI Northstar requests to reschedule outside the one (1) hour time frame above, ATI Northstar shall be charged an additional Analog 2W Loops Service Order Charge for rescheduling the conversion to the New Conversion Time. 3.3.1.6 If ATI Northstar is not ready to accept service at the Scheduled Conversion Time or at a New Conversion Time, as applicable, an additional Service Order Charge shall apply. If Verizon is not available or ready to perform the conversion within thirty (30) minutes of the Scheduled Conversion Time or New Conversion Time, as applicable, Verizon and ATI Northstar will reschedule and, upon request from ATINorthstar, Verizon will credit the Analog 2W Loop Service Order Charge for the original Scheduled Conversion Time. 3.3.1.7 The standard time interval expected from disconnection of a live Telephone Exchange Service to the connection of the Analog 2W Loops to ATI Northstar is fifteen (15) minutes per Analog 2W Loop for all orders consisting of twenty (20) Analog 2W Loops or less. Orders involving more than twenty (20) Loops will require a negotiated interval. 3.3.1.8 Conversions involving LNP will be completed according to North American Numbering Council (NANC) standards, via the regional Number Portability Administration Center (NPAC). 3.3.1.9 If ATI Northstar requires Analog 2W Loop conversions outside of the regularly scheduled Verizon RCCC operating hours, such conversions shall be separately negotiated. Additional charges (e.g. overtime labor charges) may apply for desired dates and times outside of regularly scheduled RCCC operating hours.

Conversion of Live Telephone Exchange Service to Analog 2W Loops. 3.3.1 3.17.1 The following coordination procedures shall apply to “live” cutovers of Verizon Customers who are converting their Telephone Exchange Services to ATI Intrado Telephone Exchange Services provisioned over Analog 2W unbundled Local Loops (“Analog 2W Loops) to be provided by Verizon to ATIIntrado: 3.3.1.1 3.17.1.1 Coordinated cutover charges shall apply to conversions of live Telephone Exchange Services to Analog 2W Loops. When an outside dispatch is required to perform a conversion, additional charges may apply. If ATI Intrado does not request a coordinated cutover, Verizon will process ATI**CLEC’s order as a new installation subject to applicable standard provisioning intervals. 3.3.1.2 ATI 3.17.1.2 Intrado shall request Analog 2W Loops for coordinated cutover from Verizon by delivering to Verizon a valid electronic Local Service Request (“LSR”). Xxxxxxx agrees to accept from ATI Intrado the date and time for the conversion designated on the LSR (“Scheduled Conversion Time”), provided that such designation is within the regularly scheduled operating hours of the Verizon Regional CLEC Control Center (“RCCC”) and subject to the availability of Verizon’s work force. In the event that Xxxxxxx’s work force is not available, ATI Intrado and Verizon shall mutually agree on a New Conversion Time, as defined below. ATI Intrado shall designate the Scheduled Conversion Time subject to Verizon standard provisioning intervals as stated in the Verizon CLEC Handbook, as may be revised from time to time. Within three (3) Business Days business days of Verizon's receipt of such valid LSR, or as otherwise required by Applicable Law, Verizon shall provide ATI Intrado the scheduled due date for conversion of the Analog 2W Loops covered by such LSR. 3.3.1.3 ATI 3.17.1.3 Intrado shall provide dial tone at the ATI collocation Intrado Collocation site at least forty-eight (48) hours prior to the Scheduled Conversion Time. 3.3.1.4 3.17.1.4 Either Party may contact the other Party to negotiate a new Scheduled Conversion Time (the “New Conversion Time”); provided, however, that each Party shall use commercially reasonable efforts to provide four (4) business hours’ advance notice to the other Party of its request for a New Conversion Time. Any Scheduled Conversion Time or New Conversion Time may not be rescheduled more than one one (1) time in a Business Daybusiness day, and any two New Conversion Times for a particular Analog 2W Loop Loops shall differ by at least eight (8) hours, unless otherwise agreed to by the Parties. 3.3.1.5 3.17.1.5 If the New Conversion Time is more than one (1) business hour from the original Scheduled Conversion Time or from the previous New Conversion Time, the Party requesting such New Conversion Time shall be subject to the following: 3.3.1.5.1 3.17.1.5.1 If Verizon requests to reschedule outside of the one (1) hour time frame above, the Analog 2W Loops Service Order Charge for the original Scheduled Conversion Time or the previous New Conversion Time shall be credited waived upon request from ATIIntrado; and 3.3.1.5.2 3.17.1.5.2 If ATI Intrado requests to reschedule outside the one one (1) hour time frame above, ATI Intrado shall be charged an additional Analog 2W Loops Service Order Charge for rescheduling the conversion to the New Conversion Time. 3.3.1.6 3.17.1.6 If ATI Intrado is not ready to accept service at the Scheduled Conversion Time or at a New Conversion Time, as applicable, an additional Service Order Charge shall apply. If Verizon is not available or ready to perform the conversion within thirty (30) minutes of the Scheduled Conversion Time or New Conversion Time, as applicable, Verizon and ATI will reschedule and, upon request from ATI, Verizon will credit the Analog 2W Loop Service Order Charge for the original Scheduled Conversion Time. 3.3.1.7 The standard time interval expected from disconnection of a live Telephone Exchange Service to the connection of the Analog 2W Loops to ATI is fifteen (15) minutes per Analog 2W Loop for all orders consisting of twenty (20) Analog 2W Loops or less. Orders involving more than twenty (20) Loops will require a negotiated interval. 3.3.1.8 Conversions involving LNP will be completed according to North American Numbering Council (NANC) standards, via the regional Number Portability Administration Center (NPAC). 3.3.1.9 If ATI requires Analog 2W Loop conversions outside of the regularly scheduled Verizon RCCC operating hours, such conversions shall be separately negotiated. Additional charges (e.g. overtime labor charges) may apply for desired dates and times outside of regularly scheduled RCCC operating hours.thirty

Conversion of Live Telephone Exchange Service to Analog 2W Loops. 3.3.1 3.17.1 The following coordination procedures shall apply to “live” cutovers of Verizon Customers who are converting their Telephone Exchange Services to ATI Premiere Telephone Exchange Services provisioned over Analog 2W unbundled Local Loops (“Analog 2W Loops) to be provided by Verizon to ATIPremiere: 3.3.1.1 3.17.1.1 Coordinated cutover charges shall apply to conversions of live Telephone Exchange Services to Analog 2W Loops. When an outside dispatch is required to perform a conversion, additional charges may apply. If ATI Premiere does not request a coordinated cutover, Verizon will process ATIPremiere’s order as a new installation subject to applicable standard provisioning intervals. 3.3.1.2 ATI 3.17.1.2 Premiere shall request Analog 2W Loops for coordinated cutover from Verizon by delivering to Verizon a valid electronic Local Service Request (“LSR”). Xxxxxxx Verizon agrees to accept from ATI Premiere the date and time for the conversion designated on the LSR (“Scheduled Conversion Time”), provided that such designation is within the regularly scheduled operating hours of the Verizon Regional CLEC Control Center (“RCCC”) and subject to the availability of Verizon’s work force. In the event that XxxxxxxVerizon’s work force is not available, ATI Premiere and Verizon shall mutually agree on a New Conversion Time, as defined below. ATI Premiere shall designate the Scheduled Conversion Time subject to Verizon standard provisioning intervals as stated in the Verizon CLEC Handbook, as may be revised from time to time. Within three (3) Business Days of Verizon's receipt of such valid LSR, or as otherwise required by Applicable Law, Verizon shall provide ATI Premiere the scheduled due date for conversion of the Analog 2W Loops covered by such LSR. 3.3.1.3 ATI 3.17.1.3 Premiere shall provide dial tone at the ATI collocation Premiere Collocation site at least forty-eight (48) hours prior to the Scheduled Conversion Time. 3.3.1.4 3.17.1.4 Either Party may contact the other Party to negotiate a new Scheduled Conversion Time (the “New Conversion Time”); provided, however, that each Party shall use commercially reasonable efforts to provide four (4) business hours’ advance notice to the other Party of its request for a New Conversion Time. Any Scheduled Conversion Time or New Conversion Time may not be rescheduled more than one (1) time in a Business Day, and any two New Conversion Times for a particular Analog 2W Loop Loops shall differ by at least eight (8) hours, unless otherwise agreed to by the Parties. 3.3.1.5 3.17.1.5 If the New Conversion Time is more than one (1) business hour from the original Scheduled Conversion Time or from the previous New Conversion Time, the Party requesting such New Conversion Time shall be subject to the following:following:‌‌‌‌‌‌‌ 3.3.1.5.1 3.17.1.5.1 If Verizon requests to reschedule outside of the one (1) hour time frame above, the Analog 2W Loops Service Order Charge for the original Scheduled Conversion Time or the previous New Conversion Time shall be credited waived upon request from ATIPremiere; and 3.3.1.5.2 3.17.1.5.2 If ATI Premiere requests to reschedule outside the one (1) hour time frame above, ATI Premiere shall be charged an additional Analog 2W Loops Service Order Charge for rescheduling the conversion to the New Conversion Time. 3.3.1.6 3.17.1.6 If ATI Premiere is not ready to accept service at the Scheduled Conversion Time or at a New Conversion Time, as applicable, an additional Service Order Charge shall apply. If Verizon is not available or ready to perform the conversion within thirty (30) minutes of the Scheduled Conversion Time or New Conversion Time, as applicable, Verizon and ATI Premiere will reschedule and, upon request from ATIPremiere, Verizon will credit waive the Analog 2W Loop Service Order Charge for the original Scheduled Conversion Time. 3.3.1.7 3.17.1.7 The standard time interval expected from disconnection of a live Telephone Exchange Service to the connection of the Analog 2W Loops to ATI Premiere is fifteen (15) minutes per Analog 2W Loop for all orders consisting of twenty (20) Analog 2W Loops or less. Orders involving more than twenty (20) Loops will require a negotiated interval. 3.3.1.8 3.17.1.8 Conversions involving LNP will be completed according to North American Numbering Council (“NANC”) standards, via the regional Number Portability Administration Center (“NPAC”). 3.3.1.9 3.17.1.9 If ATI Premiere requires Analog 2W Loop conversions outside of the regularly scheduled Verizon RCCC operating hours, such conversions shall be separately negotiated. Additional charges (e.g. overtime labor charges) may apply for desired dates and times outside of regularly scheduled RCCC operating hours.

Conversion of Live Telephone Exchange Service to Analog 2W Loops. 3.3.1 ‌‌‌‌‌‌ 3.17.1 The following coordination procedures shall apply to “live” cutovers of Verizon Customers who are converting their Telephone Exchange Services to ATI ICG Telephone Exchange Services provisioned over Analog 2W unbundled Local Loops (“Analog 2W Loops) to be provided by Verizon to ATIICG: 3.3.1.1 3.17.1.1 Coordinated cutover charges shall apply to conversions of live Telephone Exchange Services to Analog 2W Loops. When an outside dispatch is required to perform a conversion, additional charges may apply. If ATI ICG does not request a coordinated cutover, Verizon will process ATIICG’s order as a new installation subject to applicable standard provisioning intervals. 3.3.1.2 ATI 3.17.1.2 ICG shall request Analog 2W Loops for coordinated cutover from Verizon by delivering to Verizon a valid electronic Local Service Request (“LSR”). Xxxxxxx Verizon agrees to accept from ATI ICG the date and time for the conversion designated on the LSR (“Scheduled Conversion Time”), provided that such designation is within the regularly scheduled operating hours of the Verizon Regional CLEC Control Center (“RCCC”) and subject to the availability of Verizon’s work force. In the event that XxxxxxxVerizon’s work force is not available, ATI ICG and Verizon shall mutually agree on a New Conversion Time, as defined below. ATI ICG shall designate the Scheduled Conversion Time subject to Verizon standard provisioning intervals as stated in the Verizon CLEC Handbook, as may be revised from time to time. Within three (3) Business Days of Verizon's receipt of such valid LSR, or as otherwise required by Applicable Law, Verizon shall provide ATI ICG the scheduled due date for conversion of the Analog 2W Loops covered by such LSR. 3.3.1.3 ATI 3.17.1.3 ICG shall provide dial tone at the ATI collocation ICG Collocation site at least forty-eight (48) hours prior to the Scheduled Conversion Time. 3.3.1.4 3.17.1.4 Either Party may contact the other Party to negotiate a new Scheduled Conversion Time (the “New Conversion Time”); provided, however, that each Party shall use commercially reasonable efforts to provide four (4) business hours’ advance notice to the other Party of its request for a New Conversion Time. Any Scheduled Conversion Time or New Conversion Time may not be rescheduled more than one (1) time in a Business Day, and any two New Conversion Times for a particular Analog 2W Loop Loops shall differ by at least eight (8) hours, unless otherwise agreed to by the Parties. 3.3.1.5 3.17.1.5 If the New Conversion Time is more than one (1) business hour from the original Scheduled Conversion Time or from the previous New Conversion Time, the Party requesting such New Conversion Time shall be subject to the following: 3.3.1.5.1 3.17.1.5.1 If Verizon requests to reschedule outside of the one (1) hour time frame above, the Analog 2W Loops Service Order Charge for the original Scheduled Conversion Time or the previous New Conversion Time shall be credited waived upon request from ATIICG; andand‌‌‌‌‌‌ 3.3.1.5.2 3.17.1.5.2 If ATI ICG requests to reschedule outside the one one (1) hour time frame above, ATI ICG shall be charged an additional Analog 2W Loops Service Order Charge for rescheduling the conversion to the New Conversion Time. 3.3.1.6 3.17.1.6 If ATI ICG is not ready to accept service at the Scheduled Conversion Time or at a New Conversion Time, as applicable, an additional Service Order Charge shall apply. If Verizon is not available or ready to perform the conversion within thirty (30) minutes of the Scheduled Conversion Time or New Conversion Time, as applicable, Verizon and ATI ICG will reschedule and, upon request from ATIICG, Verizon will credit waive the Analog 2W Loop Service Order Charge for the original Scheduled Conversion Time. 3.3.1.7 3.17.1.7 The standard time interval expected from disconnection of a live Telephone Exchange Service to the connection of the Analog 2W Loops to ATI ICG is fifteen (15) minutes per Analog 2W Loop for all orders consisting of twenty (20) Analog 2W Loops or less. Orders involving more than twenty (20) Loops will require a negotiated interval. 3.3.1.8 3.17.1.8 Conversions involving LNP will be completed according to North American Numbering Council (“NANC”) standards, via the regional Number Portability Administration Center (“NPAC”). 3.3.1.9 3.17.1.9 If ATI ICG requires Analog 2W Loop conversions outside of the regularly scheduled Verizon RCCC operating hours, such conversions shall be separately negotiated. Additional charges (e.g. overtime labor charges) may apply for desired dates and times outside of regularly scheduled RCCC operating hours.

Conversion of Live Telephone Exchange Service to Analog 2W Loops. 3.3.1 3.17.1 The following coordination procedures shall apply to “live” cutovers of Verizon Customers who are converting their Telephone Exchange Services to ATI Ciera Telephone Exchange Services provisioned over Analog 2W unbundled Local Loops (“Analog 2W Loops) to be provided by Verizon to ATICiera: 3.3.1.1 3.17.1.1 Coordinated cutover charges shall apply to conversions of live Telephone Exchange Services to Analog 2W Loops. When an outside dispatch is required to perform a conversion, additional charges may apply. If ATI Ciera does not request a coordinated cutover, Verizon will process ATICiera’s order as a new installation subject to applicable standard provisioning intervals. 3.3.1.2 ATI 3.17.1.2 Ciera shall request Analog 2W Loops for coordinated cutover from Verizon by delivering to Verizon a valid electronic Local Service Request (“LSR”). Xxxxxxx Verizon agrees to accept from ATI Ciera the date and time for the conversion designated on the LSR (“Scheduled Conversion Time”), provided that such designation is within the regularly scheduled operating hours of the Verizon Regional CLEC Control Center (“RCCC”) and subject to the availability of Verizon’s work force. In the event that XxxxxxxVerizon’s work force is not available, ATI Ciera and Verizon shall mutually agree on a New Conversion Time, as defined below. ATI Ciera shall designate the Scheduled Conversion Time subject to Verizon standard provisioning intervals as stated in the Verizon CLEC Handbook, as may be revised from time to time. Within three (3) Business Days of Verizon's receipt of such valid LSR, or as otherwise required by Applicable Law, Verizon shall provide ATI Ciera the scheduled due date for conversion of the Analog 2W Loops covered by such LSR. 3.3.1.3 ATI 3.17.1.3 Ciera shall provide dial tone at the ATI collocation Ciera Collocation site at least forty-eight (48) hours prior to the Scheduled Conversion Time. 3.3.1.4 3.17.1.4 Either Party may contact the other Party to negotiate a new Scheduled Conversion Time (the “New Conversion Time”); provided, however, that each Party shall use commercially reasonable efforts to provide four (4) business hours’ advance notice to the other Party of its request for a New Conversion Time. Any Scheduled Conversion Time or New Conversion Time may not be rescheduled more than one (1) time in a Business Daybusiness day, and any two New Conversion Times for a particular Analog 2W Loop shall differ by at least eight (8) hours, unless otherwise agreed to by the Parties. 3.3.1.5 3.17.1.5 If the New Conversion Time is more than one (1) business hour from the original Scheduled Conversion Time or from the previous New Conversion Time, the Party requesting such New Conversion Time shall be subject to the following: 3.3.1.5.1 3.17.1.5.1 If Verizon requests to reschedule outside of the one (1) hour time frame above, the Analog 2W Loops Service Order Charge for the original Scheduled Conversion Time or the previous New Conversion Time shall be credited waived upon request from ATICiera; and 3.3.1.5.2 3.17.1.5.2 If ATI Ciera requests to reschedule outside the one one (1) hour time frame above, ATI Ciera shall be charged an additional Analog 2W Loops Service Order Charge for rescheduling the conversion to the New Conversion Time. 3.3.1.6 3.17.1.6 If ATI Ciera is not ready to accept service at the Scheduled Conversion Time or at a New Conversion Time, as applicable, an additional Service Order Charge shall apply. If Verizon is not available or ready to perform the conversion within thirty (30) minutes of the Scheduled Conversion Time or New Conversion Time, as applicable, Verizon and ATI Ciera will reschedule and, upon request from ATICiera, Verizon will credit waive the Analog 2W Loop Service Order Charge for the original Scheduled Conversion Time. 3.3.1.7 3.17.1.7 The standard time interval expected from disconnection of a live Telephone Exchange Service to the connection of the Analog 2W Loops to ATI Ciera is fifteen (15) minutes per Analog 2W Loop for all orders consisting of twenty (20) Analog 2W Loops or less. Orders involving more than twenty (20) Loops will require a negotiated interval. 3.3.1.8 3.17.1.8 Conversions involving LNP will be completed according to North American Numbering Council (“NANC”) standards, via the regional Number Portability Administration Center (“NPAC”). 3.3.1.9 3.17.1.9 If ATI Ciera requires Analog 2W Loop conversions outside of the regularly scheduled Verizon RCCC operating hours, such conversions shall be separately negotiated. Additional charges (e.g. overtime labor charges) may apply for desired dates and times outside of regularly scheduled RCCC operating hours.

Conversion of Live Telephone Exchange Service to Analog 2W Loops. 3.3.1 3.17.1 The following coordination procedures shall apply to “live” cutovers of Verizon Customers who are converting their Telephone Exchange Services to ATI IG2 Telephone Exchange Services provisioned over Analog 2W unbundled Local Loops (“Analog 2W Loops) to be provided by Verizon to ATIIG2: 3.3.1.1 3.17.1.1 Coordinated cutover charges shall apply to conversions of live Telephone Exchange Services to Analog 2W Loops. When an outside dispatch is required to perform a conversion, additional charges may apply. If ATI IG2 does not request a coordinated cutover, Verizon will process ATIIG2’s order as a new installation subject to applicable standard provisioning intervals. 3.3.1.2 ATI 3.17.1.2 IG2 shall request Analog 2W Loops for coordinated cutover from Verizon by delivering to Verizon a valid electronic Local Service Request (“LSR”). Xxxxxxx Verizon agrees to accept from ATI IG2 the date and time for the conversion designated on the LSR (“Scheduled Conversion Time”), provided that such designation is within the regularly scheduled operating hours of the Verizon Regional CLEC Control Center (“RCCC”) and subject to the availability of Verizon’s work force. In the event that XxxxxxxVerizon’s work force is not available, ATI IG2 and Verizon shall mutually agree on a New Conversion Time, as defined below. ATI IG2 shall designate the Scheduled Conversion Time subject to Verizon standard provisioning intervals as stated in the Verizon CLEC Handbook, as may be revised from time to time. Within three (3) Business Days of Verizon's receipt of such valid LSR, or as otherwise required by Applicable Law, Verizon shall provide ATI IG2 the scheduled due date for conversion of the Analog 2W Loops covered by such LSR. 3.3.1.3 ATI 3.17.1.3 IG2 shall provide dial tone at the ATI collocation IG2 Collocation site at least forty-eight (48) hours prior to the Scheduled Conversion Time. 3.3.1.4 3.17.1.4 Either Party may contact the other Party to negotiate a new Scheduled Conversion Time (the “New Conversion Time”); provided, however, that each Party shall use commercially reasonable efforts to provide four (4) business hours’ advance notice to the other Party of its request for a New Conversion Time. Any Scheduled Conversion Time or New Conversion Time may not be rescheduled more than one (1) time in a Business Daybusiness day, and any two New Conversion Times for a particular Analog 2W Loop shall differ by at least eight (8) hours, unless otherwise agreed to by the Parties. 3.3.1.5 3.17.1.5 If the New Conversion Time is more than one (1) business hour from the original Scheduled Conversion Time or from the previous New Conversion Time, the Party requesting such New Conversion Time shall be subject to the following: 3.3.1.5.1 3.17.1.5.1 If Verizon requests to reschedule outside of the one (1) hour time frame above, the Analog 2W Loops Service Order Charge for the original Scheduled Conversion Time or the previous New Conversion Time shall be credited waived upon request from ATIIG2; and 3.3.1.5.2 3.17.1.5.2 If ATI IG2 requests to reschedule outside the one (1) hour time frame above, ATI IG2 shall be charged an additional Analog 2W Loops Service Order Charge for rescheduling the conversion to the New Conversion Time. 3.3.1.6 3.17.1.6 If ATI IG2 is not ready to accept service at the Scheduled Conversion Time or at a New Conversion Time, as applicable, an additional Service Order Charge shall apply. If Verizon is not available or ready to perform the conversion within thirty (30) minutes of the Scheduled Conversion Time or New Conversion Time, as applicable, Verizon and ATI IG2 will reschedule and, upon request from ATIIG2, Verizon will credit waive the Analog 2W Loop Service Order Charge for the original Scheduled Conversion Time. 3.3.1.7 3.17.1.7 The standard time interval expected from disconnection of a live Telephone Exchange Service to the connection of the Analog 2W Loops to ATI IG2 is fifteen (15) minutes per Analog 2W Loop for all orders consisting of twenty (20) Analog 2W Loops or less. Orders involving more than twenty (20) Loops will require a negotiated interval. 3.3.1.8 3.17.1.8 Conversions involving LNP will be completed according to North American Numbering Council (“NANC”) standards, via the regional Number Portability Administration Center (“NPAC”). 3.3.1.9 3.17.1.9 If ATI IG2 requires Analog 2W Loop conversions outside of the regularly scheduled Verizon RCCC operating hours, such conversions shall be separately negotiated. Additional charges (e.g. overtime labor charges) may apply for desired dates and times outside of regularly scheduled RCCC operating hours.

Conversion of Live Telephone Exchange Service to Analog 2W Loops. 3.3.1 The following coordination procedures shall apply to “live” cutovers of Verizon Customers who are converting their Telephone Exchange Services to ATI New Horizons Telephone Exchange Services provisioned over Analog 2W unbundled Local Loops (“Analog 2W Loops) to be provided by Verizon to ATINew Horizons: 3.3.1.1 Coordinated cutover charges shall apply to conversions of live Telephone Exchange Services to Analog 2W Loops. When an outside dispatch is required to perform a conversion, additional charges may apply. If ATI New Horizons does not request a coordinated cutover, Verizon will process ATINew Horizons’s order as a new installation subject to applicable standard provisioning intervals. 3.3.1.2 ATI New Horizons shall request Analog 2W Loops for coordinated cutover from Verizon by delivering to Verizon a valid electronic Local Service Request (“LSR”). Xxxxxxx agrees to accept from ATI New Horizons the date and time for the conversion designated on the LSR (“Scheduled Conversion Time”), provided that such designation is within the regularly scheduled operating hours of the Verizon Regional CLEC Control Center (“RCCC”) and subject to the availability of Verizon’s work force. In the event that Xxxxxxx’s work force is not available, ATI New Horizons and Verizon shall mutually agree on a New Conversion Time, as defined below. ATI New Horizons shall designate the Scheduled Conversion Time subject to Verizon standard provisioning intervals as stated in the Verizon CLEC Handbook, as may be revised from time to time. Within three (3) Business Days of Verizon's receipt of such valid LSR, or as otherwise required by Applicable Law, Verizon shall provide ATI New Horizons the scheduled due date for conversion of the Analog 2W Loops covered by such LSR. 3.3.1.3 ATI New Horizons shall provide dial tone at the ATI New Horizons collocation site at least forty-eight (48) hours prior to the Scheduled Conversion Time. 3.3.1.4 Either Party may contact the other Party to negotiate a new Scheduled Conversion Time (the “New Conversion Time”); provided, however, that each Party shall use commercially reasonable efforts to provide four (4) business hours’ advance notice to the other Party of its request for a New Conversion Time. Any Scheduled Conversion Time or New Conversion Time may not be rescheduled more than one (1) time in a Business Day, and any two New Conversion Times for a particular Analog 2W Loop shall differ by at least eight (8) hours, unless otherwise agreed to by the Parties. 3.3.1.5 If the New Conversion Time is more than one (1) business hour from the original Scheduled Conversion Time or from the previous New Conversion Time, the Party requesting such New Conversion Time shall be subject to the following: 3.3.1.5.1 If Verizon requests to reschedule outside of the one (1) hour time frame above, the Analog 2W Loops Service Order Charge for the original Scheduled Conversion Time or the previous New Conversion Time shall be credited upon request from ATINew Horizons; and 3.3.1.5.2 If ATI New Horizons requests to reschedule outside the one (1) hour time frame above, ATI New Horizons shall be charged an additional Analog 2W Loops Service Order Charge for rescheduling the conversion to the New Conversion Time. 3.3.1.6 If ATI New Horizons is not ready to accept service at the Scheduled Conversion Time or at a New Conversion Time, as applicable, an additional Service Order Charge shall apply. If Verizon is not available or ready to perform the conversion within thirty (30) minutes of the Scheduled Conversion Time or New Conversion Time, as applicable, Verizon and ATI New Horizons will reschedule and, upon request from ATINew Horizons, Verizon will credit the Analog 2W Loop Service Order Charge for the original Scheduled Conversion Time. 3.3.1.7 The standard time interval expected from disconnection of a live Telephone Exchange Service to the connection of the Analog 2W Loops to ATI New Horizons is fifteen (15) minutes per Analog 2W Loop for all orders consisting of twenty (20) Analog 2W Loops or less. Orders involving more than twenty (20) Loops will require a negotiated interval. 3.3.1.8 Conversions involving LNP will be completed according to North American Numbering Council (NANC) standards, via the regional Number Portability Administration Center (NPAC). 3.3.1.9 If ATI New Horizons requires Analog 2W Loop conversions outside of the regularly scheduled Verizon RCCC operating hours, such conversions shall be separately negotiated. Additional charges (e.g. overtime labor charges) may apply for desired dates and times outside of regularly scheduled RCCC operating hours.

Conversion of Live Telephone Exchange Service to Analog 2W Loops. 3.3.1 The following coordination procedures shall apply to “live” cutovers of Verizon VERIZON Customers who are converting their Telephone Exchange Services to ATI SPRINT Telephone Exchange Services provisioned over Analog 2W unbundled Local Loops (“Analog 2W Loops”) to be provided by Verizon VERIZON to ATI:SPRINT. 3.3.1.1 Coordinated 1.9.1 Subject to approval by the Commission, coordinated cutover charges shall apply to conversions of live Telephone Exchange Services to Analog 2W Loops. When an outside dispatch is required to perform a conversion, additional charges may apply. If ATI SPRINT does not request a coordinated cutover, Verizon VERIZON will process ATISPRINT’s order as a new installation subject to applicable standard provisioning intervals. 3.3.1.2 ATI 1.9.2 SPRINT shall request Analog 2W Loops for coordinated cutover from Verizon VERIZON by delivering to Verizon VERIZON a valid electronic Local Service Request (“LSR”). Xxxxxxx VERIZON agrees to accept from ATI SPRINT the date and time for the conversion designated on the LSR (“Scheduled Conversion Time”), provided that such designation is within the regularly scheduled operating hours of the Verizon VERIZON Regional CLEC Control Center (“RCCC”) and subject to the availability of VerizonVERIZON’s work force. In the event that XxxxxxxVERIZON’s work force is not available, ATI SPRINT and Verizon VERIZON shall mutually agree on a New Conversion Time, as defined below. ATI SPRINT shall designate the Scheduled Conversion Time subject to Verizon VERIZON standard provisioning intervals as stated in the Verizon VERIZON CLEC Handbook, as may be revised from time to time. Within three (3) Business Days business days of VerizonVERIZON's receipt of such valid LSR, or as otherwise required by Applicable Law, Verizon VERIZON shall provide ATI SPRINT the scheduled schedule due date for conversion of by which the Analog 2W Loops covered by such LSRLSR will be converted. 3.3.1.3 ATI 1.9.3 SPRINT shall provide dial tone at the ATI collocation SPRINT Collocation site at least forty-eight (48) hours prior to the Scheduled Conversion Time. 3.3.1.4 1.9.4 Either Party may contact the other Party to negotiate a new Scheduled Conversion Time (the “New Conversion Time”); provided, however, that each Party shall use commercially reasonable efforts to provide four (4) business hours’ advance notice to the other Party of its request for a New Conversion Time. Any Scheduled Conversion Time or New Conversion Time may not be rescheduled more than one one (1) time in a Business Daybusiness day, and any two New Conversion Times for a particular Analog 2W Loop Loops shall differ by at least eight (8) hours, unless otherwise agreed to by the Parties. 3.3.1.5 1.9.4.1 If the New Conversion Time is more than one (1) business hour from the original Scheduled Conversion Time or from the previous New Conversion Time, the Party requesting such New Conversion Time shall be subject to the following: 3.3.1.5.1 (i) If Verizon VERIZON requests to reschedule outside of the one (1) hour time frame above, the Analog 2W Loops Service Order Charge for the original Scheduled Conversion Time or the previous New Conversion Time shall be credited waived upon request from ATISPRINT; and 3.3.1.5.2 (ii) If ATI SPRINT requests to reschedule outside the one (1) hour time frame above, ATI SPRINT shall be charged an additional Analog 2W Loops Service Order Charge for rescheduling the conversion to the New Conversion Time. 3.3.1.6 1.9.5 If ATI SPRINT is not ready to accept service at the Scheduled Conversion Time or at a New Conversion Time, as applicable, an additional Service Order Charge shall apply. If Verizon VERIZON is not available or ready to perform the conversion within thirty (30) minutes of the Scheduled Conversion Time or New Conversion Time, as applicable, Verizon VERIZON and ATI SPRINT will reschedule and, upon request from ATISPRINT, Verizon VERIZON will credit waive the Analog 2W Loop Service Order Charge for the original Scheduled Conversion Time. 3.3.1.7 1.9.6 The standard time interval expected from disconnection of a live Telephone Exchange Service to the connection of the Analog 2W Loops to ATI SPRINT is fifteen (15) minutes per Analog 2W Loop for all orders consisting of twenty (20) Analog 2W Loops or less. Orders involving more than twenty (20) Loops will require a negotiated interval. 3.3.1.8 1.9.7 Conversions involving LNP will be completed according to North American Numbering Council (“NANC”) standards, via the regional Number Portability Administration Center (“NPAC”). 3.3.1.9 1.9.8 If ATI SPRINT requires Analog 2W Loop Loops conversions outside of the regularly scheduled Verizon VERIZON RCCC operating hours, such conversions shall be separately negotiated. Additional charges (e.g. overtime labor charges) may apply for desired dates and times outside of regularly scheduled RCCC operating hours.

Conversion of Live Telephone Exchange Service to Analog 2W Loops. 3.3.1 The following coordination procedures shall apply to “live” cutovers of Verizon Customers who are converting their Telephone Exchange Services to ATI NLG Telephone Exchange Services provisioned over Analog 2W unbundled Local Loops (“Analog 2W Loops) to be provided by Verizon to ATINLG: 3.3.1.1 Coordinated cutover charges shall apply to conversions of live Telephone Exchange Services to Analog 2W Loops. When an outside dispatch is required to perform a conversion, additional charges may apply. If ATI NLG does not request a coordinated cutover, Verizon will process ATINLG’s order as a new installation subject to applicable standard provisioning intervals. 3.3.1.2 ATI NLG shall request Analog 2W Loops for coordinated cutover from Verizon by delivering to Verizon a valid electronic Local Service Request (“LSR”). Xxxxxxx agrees to accept from ATI NLG the date and time for the conversion designated on the LSR (“Scheduled Conversion Time”), provided that such designation is within the regularly scheduled operating hours of the Verizon Regional CLEC Control Center (“RCCC”) and subject to the availability of Verizon’s work force. In the event that Xxxxxxx’s work force is not available, ATI NLG and Verizon shall mutually agree on a New Conversion Time, as defined below. ATI NLG shall designate the Scheduled Conversion Time subject to Verizon standard provisioning intervals as stated in the Verizon CLEC Handbook, as may be revised from time to time. Within three (3) Business Days of Verizon's receipt of such valid LSR, or as otherwise required by Applicable Law, Verizon shall provide ATI NLG the scheduled due date for conversion of the Analog 2W Loops covered by such LSR. 3.3.1.3 ATI NLG shall provide dial tone at the ATI NLG collocation site at least forty-eight (48) hours prior to the Scheduled Conversion Time. 3.3.1.4 Either Party may contact the other Party to negotiate a new Scheduled Conversion Time (the “New Conversion Time”); provided, however, that each Party shall use commercially reasonable efforts to provide four (4) business hours’ advance notice to the other Party of its request for a New Conversion Time. Any Scheduled Conversion Time or New Conversion Time may not be rescheduled more than one (1) time in a Business Day, and any two New Conversion Times for a particular Analog 2W Loop shall differ by at least eight (8) hours, unless otherwise agreed to by the Parties. 3.3.1.5 If the New Conversion Time is more than one (1) business hour from the original Scheduled Conversion Time or from the previous New Conversion Time, the Party requesting such New Conversion Time shall be subject to the following: 3.3.1.5.1 If Verizon requests to reschedule outside of the one (1) hour time frame above, the Analog 2W Loops Service Order Charge for the original Scheduled Conversion Time or the previous New Conversion Time shall be credited upon request from ATINLG; and 3.3.1.5.2 If ATI NLG requests to reschedule outside the one (1) hour time frame above, ATI shall be charged an additional Analog 2W Loops Service Order Charge for rescheduling the conversion to the New Conversion Time. 3.3.1.6 If ATI is not ready to accept service at the Scheduled Conversion Time or at a New Conversion Time, as applicable, an additional Service Order Charge shall apply. If Verizon is not available or ready to perform the conversion within thirty (30) minutes of the Scheduled Conversion Time or New Conversion Time, as applicable, Verizon and ATI will reschedule and, upon request from ATI, Verizon will credit the Analog 2W Loop Service Order Charge for the original Scheduled Conversion Time. 3.3.1.7 The standard time interval expected from disconnection of a live Telephone Exchange Service to the connection of the Analog 2W Loops to ATI is fifteen (15) minutes per Analog 2W Loop for all orders consisting of twenty (20) Analog 2W Loops or less. Orders involving more than twenty (20) Loops will require a negotiated interval. 3.3.1.8 Conversions involving LNP will be completed according to North American Numbering Council (NANC) standards, via the regional Number Portability Administration Center (NPAC). 3.3.1.9 If ATI requires Analog 2W Loop conversions outside of the regularly scheduled Verizon RCCC operating hours, such conversions shall be separately negotiated. Additional charges (e.g. overtime labor charges) may apply for desired dates and times outside of regularly scheduled RCCC operating hours.one

Conversion of Live Telephone Exchange Service to Analog 2W Loops. 3.3.1 3.17.1 The following coordination procedures shall apply to “live” cutovers of Verizon Customers who are converting their Telephone Exchange Services to ATI VarTec Telephone Exchange Services provisioned over Analog 2W unbundled Local Loops (“Analog 2W Loops) to be provided by Verizon to ATIVarTec: 3.3.1.1 3.17.1.1 Coordinated cutover charges shall apply to conversions of live Telephone Exchange Services to Analog 2W Loops. When an outside dispatch is required to perform a conversion, additional charges may apply. If ATI VarTec does not request a coordinated cutover, Verizon will process ATIVarTec’s order as a new installation subject to applicable standard provisioning intervals. 3.3.1.2 ATI 3.17.1.2 VarTec shall request Analog 2W Loops for coordinated cutover from Verizon by delivering to Verizon a valid electronic Local Service Request (“LSR”). Xxxxxxx agrees to accept from ATI VarTec the date and time for the conversion designated on the LSR (“Scheduled Conversion Time”), provided that such designation is within the regularly scheduled operating hours of the Verizon Regional CLEC Control Center (“RCCC”) and subject to the availability of Verizon’s work force. In the event that Xxxxxxx’s work force is not available, ATI VarTec and Verizon shall mutually agree on a New Conversion Time, as defined below. ATI VarTec shall designate the Scheduled Conversion Time subject to Verizon standard provisioning intervals as stated in the Verizon CLEC Handbook, as may be revised from time to time. Within three (3) Business Days of Verizon's receipt of such valid LSR, or as otherwise required by Applicable Law, Verizon shall provide ATI VarTec the scheduled due date for conversion of the Analog 2W Loops covered by such LSR. 3.3.1.3 ATI 3.17.1.3 VarTec shall provide dial tone at the ATI collocation VarTec Collocation site at least forty-eight (48) hours prior to the Scheduled Conversion Time. 3.3.1.4 3.17.1.4 Either Party may contact the other Party to negotiate a new Scheduled Conversion Time (the “New Conversion Time”); provided, however, that each Party shall use commercially reasonable efforts to provide four (4) business hours’ advance notice to the other Party of its request for a New Conversion Time. Any Scheduled Conversion Time or New Conversion Time may not be rescheduled more than one (1) time in a Business Daybusiness day, and any two New Conversion Times for a particular Analog 2W Loop shall differ by at least eight (8) hours, unless otherwise agreed to by the Parties. 3.3.1.5 3.17.1.5 If the New Conversion Time is more than one (1) business hour from the original Scheduled Conversion Time or from the previous New Conversion Time, the Party requesting such New Conversion Time shall be subject to the following: 3.3.1.5.1 3.17.1.5.1 If Verizon requests to reschedule outside of the one (1) hour time frame above, the Analog 2W Loops Service Order Charge for the original Scheduled Conversion Time or the previous New Conversion Time shall be credited waived upon request from ATIVarTec; and 3.3.1.5.2 3.17.1.5.2 If ATI VarTec requests to reschedule outside the one one (1) hour time frame above, ATI VarTec shall be charged an additional Analog 2W Loops Service Order Charge for rescheduling the conversion to the New Conversion Time. 3.3.1.6 3.17.1.6 If ATI VarTec is not ready to accept service at the Scheduled Conversion Time or at a New Conversion Time, as applicable, an additional Service Order Charge shall apply. If Verizon is not available or ready to perform the conversion within thirty (30) minutes of the Scheduled Conversion Time or New Conversion Time, as applicable, Verizon and ATI VarTec will reschedule and, upon request from ATIVarTec, Verizon will credit waive the Analog 2W Loop Service Order Charge for the original Scheduled Conversion Time. 3.3.1.7 3.17.1.7 The standard time interval expected from disconnection of a live Telephone Exchange Service to the connection of the Analog 2W Loops to ATI VarTec is fifteen (15) minutes per Analog 2W Loop for all orders consisting of twenty (20) Analog 2W Loops or less. Orders involving more than twenty (20) Loops will require a negotiated interval. 3.3.1.8 3.17.1.8 Conversions involving LNP will be completed according to North American Numbering Council (“NANC”) standards, via the regional Number Portability Administration Center (“NPAC”). 3.3.1.9 3.17.1.9 If ATI VarTec requires Analog 2W Loop conversions outside of the regularly scheduled Verizon RCCC operating hours, such conversions shall be separately negotiated. Additional charges (e.g. overtime labor charges) may apply for desired dates and times outside of regularly scheduled RCCC operating hours.

Conversion of Live Telephone Exchange Service to Analog 2W Loops. 3.3.1 The following coordination procedures shall apply to “live” cutovers of Verizon BA Customers who are converting their Telephone Exchange Services to ATI TGI Telephone Exchange Services provisioned over Analog 2W unbundled Local Loops (“Analog 2W Loops's) to be provided by Verizon BA to ATI:TGI. 3.3.1.1 Coordinated 11.9.1 Subject to approval by the Commission, coordinated cutover charges shall apply to conversions of live Telephone Exchange Services to Analog 2W Loops. When an outside dispatch is required to perform a conversion, additional charges may apply. If ATI TGI does not request a coordinated cutover, Verizon BA will process ATITGI’s order as a new installation subject to applicable standard provisioning intervals. 3.3.1.2 ATI 11.9.2 TGI shall request Analog 2W Loops Loop(s) for coordinated cutover from Verizon BA by delivering to Verizon BA a valid electronic Local Service Request (“LSR”). Xxxxxxx BA agrees to accept from ATI TGI the date and time for the conversion designated on the LSR (“Scheduled Conversion Time”), provided that such designation is within the regularly scheduled operating hours of the Verizon BA Regional CLEC Control Center (“RCCC”) and subject to the availability of VerizonBA’s work force. In the event that XxxxxxxBA’s work force is not available, ATI TGI and Verizon BA shall mutually agree on a New Conversion Time, as defined below. ATI TGI shall designate the Scheduled Conversion Time subject to Verizon BA standard provisioning intervals as stated in the Verizon BA CLEC Handbook, as may be revised from time to time. Within three two (32) Business Days business days of VerizonBA's receipt of such valid LSR, or as otherwise required by Applicable Law, Verizon BA shall provide ATI TGI the scheduled due firm order commitment (“FOC”) date for conversion of by which the Analog 2W Loops Loop(s) covered by such LSRLSR will be converted. 3.3.1.3 ATI 11.9.3 TGI shall provide dial tone at the ATI collocation TGI Collocation site at least forty-forty- eight (48) hours prior to the Scheduled Conversion Time. 3.3.1.4 11.9.4 Either Party may contact the other Party to negotiate a new Scheduled Conversion Time (the “New Conversion Time”); provided, however, that each Party shall use commercially reasonable efforts to provide four (4) business hours’ advance notice to the other Party of its request for a New Conversion Time. Any Scheduled Conversion Time or New Conversion Time may not be rescheduled more than one one (1) time in a Business Daybusiness day, and any two New Conversion Times for a particular Analog 2W Loop shall differ by at least eight (8) hours, unless otherwise agreed to by the Parties. 3.3.1.5 11.9.4.1 If the New Conversion Time is more than one (1) business hour from the original Scheduled Conversion Time or from the previous New Conversion Time, the Party requesting such New Conversion Time shall be subject to the following: 3.3.1.5.1 (i) If Verizon BA requests to reschedule outside of the one (1) hour time frame above, the Analog 2W Loops Loop Service Order Charge for the original Scheduled Conversion Time or the previous New Conversion Time shall be credited waived upon request from ATITGI; and 3.3.1.5.2 (ii) If ATI TGI requests to reschedule outside the one (1) hour time frame above, ATI TGI shall be charged an additional Analog 2W Loops Loop Service Order Charge for rescheduling the conversion to the New Conversion Time. 3.3.1.6 11.9.5 If ATI TGI is not ready to accept service at the Scheduled Conversion Time or at a New Conversion Time, as applicable, an additional Service Order Charge shall apply. If Verizon BA is not available or ready to perform the conversion within thirty (30) minutes of the Scheduled Conversion Time or New Conversion Time, as applicable, Verizon BA and ATI TGI will reschedule and, upon request from ATITGI, Verizon BA will credit waive the Analog 2W Loop Service Order Charge for the original Scheduled Conversion Time.Time.‌‌‌‌ 3.3.1.7 11.9.6 The standard time interval expected from disconnection of a live Telephone Exchange Service to the connection of the Analog 2W Loops Loop to ATI TGI is fifteen (15) minutes per Analog 2W Loop for all orders consisting of twenty (20) Analog 2W Loops or less. Orders involving more than twenty (20) Loops will require a negotiated interval. 3.3.1.8 11.9.7 Conversions involving LNP will be completed according to North American Numbering Council (“NANC”) standards, via the regional Number Portability Administration Center (“NPAC”). 3.3.1.9 11.9.8 If ATI TGI requires Analog 2W Loop conversions outside of the regularly scheduled Verizon BA RCCC operating hours, such conversions shall be separately negotiated. Additional charges (e.g. overtime labor charges) may apply for desired dates and times outside of regularly scheduled RCCC operating hours.

Conversion of Live Telephone Exchange Service to Analog 2W Loops. 3.3.1 1. The following coordination procedures shall apply to “"live” " cutovers of Verizon Customers who are converting their Telephone Exchange Services to ATI Cinergy Telephone Exchange Services provisioned over Analog 2W unbundled Local Loops (“"Analog 2W Loops) to be provided by Verizon to ATICinergy: 3.3.1.1 1. Coordinated cutover charges shall apply to conversions of live Telephone Exchange Services to Analog 2W Loops. When an outside dispatch is required to perform a conversion, additional charges may apply. If ATI Cinergy does not request a coordinated cutover, Verizon will process ATICinergy’s order as a new installation subject to applicable standard provisioning intervals. 3.3.1.2 ATI 2. Cinergy shall request Analog 2W Loops for coordinated cutover from Verizon by delivering to Verizon a valid electronic Local Service Request (“"LSR”"). Xxxxxxx Verizon agrees to accept from ATI Cinergy the date and time for the conversion designated on the LSR (“"Scheduled Conversion Time”"), provided that such designation is within the regularly scheduled operating hours of the Verizon Regional CLEC Control Center (“"RCCC”") and subject to the availability of Verizon’s work force. In the event that XxxxxxxVerizon’s work force is not available, ATI Cinergy and Verizon shall mutually agree on a New Conversion Time, as defined below. ATI Cinergy shall designate the Scheduled Conversion Time subject to Verizon standard provisioning intervals as stated in the Verizon CLEC Handbook, as may be revised from time to time. Within three (3) Business Days of Verizon's receipt of such valid LSR, or as otherwise required by Applicable Law, Verizon shall provide ATI Cinergy the scheduled due date for conversion of the Analog 2W Loops covered by such LSR. 3.3.1.3 ATI 3. Cinergy shall provide dial tone at the ATI collocation Cinergy Collocation site at least forty-eight (48) hours prior to the Scheduled Conversion Time. 3.3.1.4 4. Either Party may contact the other Party to negotiate a new Scheduled Conversion Time (the “"New Conversion Time”"); provided, however, that each Party shall use commercially reasonable efforts to provide four (4) business hours’ advance notice to the other Party of its request for a New Conversion Time. Any Scheduled Conversion Time or New Conversion Time may not be rescheduled more than one one (1) time in a Business Day, and any two New Conversion Times for a particular Analog 2W Loop shall differ by at least eight (8) hours, unless otherwise agreed to by the Parties. 3.3.1.5 5. If the New Conversion Time is more than one (1) business hour from the original Scheduled Conversion Time or from the previous New Conversion Time, the Party requesting such New Conversion Time shall be subject to the following: 3.3.1.5.1 1. If Verizon requests to reschedule outside of the one (1) hour time frame above, the Analog 2W Loops Service Order Charge for the original Scheduled Conversion Time or the previous New Conversion Time shall be credited waived upon request from ATICinergy; and 3.3.1.5.2 2. If ATI Cinergy requests to reschedule outside the one (1) hour time frame above, ATI Cinergy shall be charged an additional Analog 2W Loops Service Order Charge for rescheduling the conversion to the New Conversion Time. 3.3.1.6 6. If ATI Cinergy is not ready to accept service at the Scheduled Conversion Time or at a New Conversion Time, as applicable, an additional Service Order Charge shall apply. If Verizon is not available or ready to perform the conversion within thirty (30) minutes of the Scheduled Conversion Time or New Conversion Time, as applicable, Verizon and ATI Cinergy will reschedule and, upon request from ATICinergy, Verizon will credit waive the Analog 2W Loop Service Order Charge for the original Scheduled Conversion Time. 3.3.1.7 7. The standard time interval expected from disconnection of a live Telephone Exchange Service to the connection of the Analog 2W Loops to ATI Cinergy is fifteen (15) minutes per Analog 2W Loop for all orders consisting of twenty (20) Analog 2W Loops or less. Orders involving more than twenty (20) Loops will require a negotiated interval. 3.3.1.8 8. Conversions involving LNP will be completed according to North American Numbering Council ("NANC") standards, via the regional Number Portability Administration Center ("NPAC"). 3.3.1.9 9. If ATI Cinergy requires Analog 2W Loop conversions outside of the regularly scheduled Verizon RCCC operating hours, such conversions shall be separately negotiated. Additional charges (e.g. overtime labor charges) may apply for desired dates and times outside of regularly scheduled RCCC operating hours.

Conversion of Live Telephone Exchange Service to Analog 2W Loops. 3.3.1 The following coordination procedures shall apply to “live” cutovers of Verizon Customers who are converting their Telephone Exchange Services to ATI CCI Telephone Exchange Services provisioned over Analog 2W unbundled Local Loops (“Analog 2W Loops) to be provided by Verizon to ATICCI: 3.3.1.1 Coordinated cutover charges shall apply to conversions of live Telephone Exchange Services to Analog 2W Loops. When an outside dispatch is required to perform a conversion, additional charges may apply. If ATI CCI does not request a coordinated cutover, Verizon will process ATICCI’s order as a new installation subject to applicable standard provisioning intervals. 3.3.1.2 ATI CCI shall request Analog 2W Loops for coordinated cutover from Verizon by delivering to Verizon a valid electronic Local Service Request (“LSR”). Xxxxxxx Verizon agrees to accept from ATI CCI the date and time for the conversion designated on the LSR (“Scheduled Conversion Time”), provided that such designation is within the regularly scheduled operating hours of the Verizon Regional CLEC Control Center (“RCCC”) and subject to the availability of Verizon’s work force. In the event that Xxxxxxx’s work force is not available, ATI CCI and Verizon shall mutually agree on a New Conversion Time, as defined below. ATI CCI shall designate the Scheduled Conversion Time subject to Verizon standard provisioning intervals as stated in the Verizon CLEC Handbook, as may be revised from time to time. Within three (3) Business Days of Verizon's receipt of such valid LSR, or as otherwise required by Applicable Law, Verizon shall provide ATI CCI the scheduled due date for conversion of the Analog 2W Loops covered by such LSR. 3.3.1.3 ATI CCI shall provide dial tone at the ATI collocation CCI Collocation site at least forty-eight (48) hours prior to the Scheduled Conversion Time. 3.3.1.4 Either Party may contact the other Party to negotiate a new Scheduled Conversion Time (the “New Conversion Time”); provided, however, that each Party shall use commercially reasonable efforts to provide four (4) business hours’ advance notice to the other Party of its request for a New Conversion Time. Any Scheduled Conversion Time or New Conversion Time may not be rescheduled more than one (1) time in a Business Day, and any two New Conversion Times for a particular Analog 2W Loop shall differ by at least eight (8) hours, unless otherwise agreed to by the Parties. 3.3.1.5 If the New Conversion Time is more than one (1) business hour from the original Scheduled Conversion Time or from the previous New Conversion Time, the Party requesting such New Conversion Time shall be subject to the following: 3.3.1.5.1 If Verizon requests to reschedule outside of the one (1) hour time frame above, the Analog 2W Loops Service Order Charge for the original Scheduled Conversion Time or the previous New Conversion Time shall be credited upon request from ATICCI; and 3.3.1.5.2 If ATI CCI requests to reschedule outside the one (1) hour time frame above, ATI CCI shall be charged an additional Analog 2W Loops Service Order Charge for rescheduling the conversion to the New Conversion Time. 3.3.1.6 If ATI CCI is not ready to accept service at the Scheduled Conversion Time or at a New Conversion Time, as applicable, an additional Service Order Charge shall apply. If Verizon is not available or ready to perform the conversion within thirty (30) minutes of the Scheduled Conversion Time or New Conversion Time, as applicable, Verizon and ATI CCI will reschedule and, upon request from ATICCI, Verizon will credit the Analog 2W Loop Service Order Charge for the original Scheduled Conversion Time. 3.3.1.7 The standard time interval expected from disconnection of a live Telephone Exchange Service to the connection of the Analog 2W Loops to ATI CCI is fifteen (15) minutes per Analog 2W Loop for all orders consisting of twenty (20) Analog 2W Loops or less. Orders involving more than twenty (20) Loops will require a negotiated interval. 3.3.1.8 Conversions involving LNP will be completed according to North American Numbering Council (NANC) standards, via the regional Number Portability Administration Center (NPAC). 3.3.1.9 If ATI CCI requires Analog 2W Loop conversions outside of the regularly scheduled Verizon RCCC operating hours, such conversions shall be separately negotiated. Additional charges (e.g. overtime labor charges) may apply for desired dates and times outside of regularly scheduled RCCC operating hours.

Conversion of Live Telephone Exchange Service to Analog 2W Loops. 3.3.1 The following coordination procedures shall apply to “live” cutovers of Verizon Customers who are converting their Telephone Exchange Services to ATI Xxxxxxxx Telephone Exchange Services provisioned over Analog 2W unbundled Local Loops (“Analog 2W Loops) to be provided by Verizon to ATIXxxxxxxx: 3.3.1.1 Coordinated cutover charges shall apply to conversions of live Telephone Exchange Services to Analog 2W Loops. When an outside dispatch is required to perform a conversion, additional charges may apply. If ATI Xxxxxxxx does not request a coordinated cutover, Verizon will process ATI’s Xxxxxxxx’x order as a new installation subject to applicable standard provisioning intervals. 3.3.1.2 ATI Xxxxxxxx shall request Analog 2W Loops for coordinated cutover from Verizon by delivering to Verizon a valid electronic Local Service Request (“LSR”). Xxxxxxx Verizon agrees to accept from ATI Xxxxxxxx the date and time for the conversion designated on the LSR (“Scheduled Conversion Time”), provided that such designation is within the regularly scheduled operating hours of the Verizon Regional CLEC Control Center (“RCCC”) and subject to the availability of Verizon’s work force. In the event that XxxxxxxVerizon’s work force is not available, ATI Xxxxxxxx and Verizon shall mutually agree on a New Conversion Time, as defined below. ATI Xxxxxxxx shall designate the Scheduled Conversion Time subject to Verizon standard provisioning intervals as stated in the Verizon CLEC Handbook, as may be revised from time to time. Within three (3) Business Days of Verizon's receipt of such valid LSR, or as otherwise required by Applicable Law, Verizon shall provide ATI Xxxxxxxx the scheduled due date for conversion of the Analog 2W Loops covered by such LSR. 3.3.1.3 ATI Xxxxxxxx shall provide dial tone at the ATI collocation Xxxxxxxx Collocation site at least forty-eight (48) hours prior to the Scheduled Conversion Time. 3.3.1.4 Either Party may contact the other Party to negotiate a new Scheduled Conversion Time (the “New Conversion Time”); provided, however, that each Party shall use commercially reasonable efforts to provide four (4) business hours’ advance notice to the other Party of its request for a New Conversion Time. Any Scheduled Conversion Time or New Conversion Time may not be rescheduled more than one (1) time in a Business Day, and any two New Conversion Times for a particular Analog 2W Loop shall differ by at least eight (8) hours, unless otherwise agreed to by the Parties. 3.3.1.5 If the New Conversion Time is more than one (1) business hour from the original Scheduled Conversion Time or from the previous New Conversion Time, the Party requesting such New Conversion Time shall be subject to the following: 3.3.1.5.1 If Verizon requests to reschedule outside of the one (1) hour time frame above, the Analog 2W Loops Service Order Charge for the original Scheduled Conversion Time or the previous New Conversion Time shall be credited upon request from ATIXxxxxxxx; and 3.3.1.5.2 If ATI Xxxxxxxx requests to reschedule outside the one (1) hour time frame above, ATI Xxxxxxxx shall be charged an additional Analog 2W Loops Service Order Charge for rescheduling the conversion to the New Conversion Time. 3.3.1.6 If ATI Xxxxxxxx is not ready to accept service at the Scheduled Conversion Time or at a New Conversion Time, as applicable, an additional Service Order Charge shall apply. If Verizon is not available or ready to perform the conversion within thirty (30) minutes of the Scheduled Conversion Time or New Conversion Time, as applicable, Verizon and ATI Xxxxxxxx will reschedule and, upon request from ATIXxxxxxxx, Verizon will credit the Analog 2W Loop Service Order Charge for the original Scheduled Conversion Time. 3.3.1.7 The standard time interval expected from disconnection of a live Telephone Exchange Service to the connection of the Analog 2W Loops to ATI Xxxxxxxx is fifteen (15) minutes per Analog 2W Loop for all orders consisting of twenty (20) Analog 2W Loops or less. Orders involving more than twenty (20) Loops will require a negotiated interval. 3.3.1.8 Conversions involving LNP will be completed according to North American Numbering Council (NANC) standards, via the regional Number Portability Administration Center (NPAC). 3.3.1.9 If ATI Xxxxxxxx requires Analog 2W Loop conversions outside of the regularly scheduled Verizon RCCC operating hours, such conversions shall be separately negotiated. Additional charges (e.g. overtime labor charges) may apply for desired dates and times outside of regularly scheduled RCCC operating hours.

Conversion of Live Telephone Exchange Service to Analog 2W Loops. 3.3.1 The following coordination procedures shall apply to “live” cutovers of Verizon Customers who are converting their Telephone Exchange Services to ATI TNCI Telephone Exchange Services provisioned over Analog 2W unbundled Local Loops (“Analog 2W Loops) to be provided by Verizon to ATITNCI: 3.3.1.1 Coordinated cutover charges shall apply to conversions of live Telephone Exchange Services to Analog 2W Loops. When an outside dispatch is required to perform a conversion, additional charges may apply. If ATI TNCI does not request a coordinated cutover, Verizon will process ATITNCI’s order as a new installation subject to applicable standard provisioning intervals. 3.3.1.2 ATI TNCI shall request Analog 2W Loops for coordinated cutover from Verizon by delivering to Verizon a valid electronic Local Service Request (“LSR”). Xxxxxxx Verizon agrees to accept from ATI TNCI the date and time for the conversion designated on the LSR (“Scheduled Conversion Time”), provided that such designation is within the regularly scheduled operating hours of the Verizon Regional CLEC Control Center (“RCCC”) and subject to the availability of Verizon’s work force. In the event that Xxxxxxx’s work force is not available, ATI TNCI and Verizon shall mutually agree on a New Conversion Time, as defined below. ATI TNCI shall designate the Scheduled Conversion Time subject to Verizon standard provisioning intervals as stated in the Verizon CLEC Handbook, as may be revised from time to time. Within three (3) Business Days of Verizon's receipt of such valid LSR, or as otherwise required by Applicable Law, Verizon shall provide ATI TNCI the scheduled due date for conversion of the Analog 2W Loops covered by such LSR. 3.3.1.3 ATI TNCI shall provide dial tone at the ATI TNCI collocation site at least forty-eight (48) hours prior to the Scheduled Conversion Time. 3.3.1.4 Either Party may contact the other Party to negotiate a new Scheduled Conversion Time (the “New Conversion Time”); provided, however, that each Party shall use commercially reasonable efforts to provide four (4) business hours’ advance notice to the other Party of its request for a New Conversion Time. Any Scheduled Conversion Time or New Conversion Time may not be rescheduled more than one (1) time in a Business Day, and any two New Conversion Times for a particular Analog 2W Loop shall differ by at least eight (8) hours, unless otherwise agreed to by the Parties. 3.3.1.5 If the New Conversion Time is more than one (1) business hour from the original Scheduled Conversion Time or from the previous New Conversion Time, the Party requesting such New Conversion Time shall be subject to the following: 3.3.1.5.1 If Verizon requests to reschedule outside of the one (1) hour time frame above, the Analog 2W Loops Service Order Charge for the original Scheduled Conversion Time or the previous New Conversion Time shall be credited upon request from ATITNCI; and 3.3.1.5.2 If ATI TNCI requests to reschedule outside the one one (1) hour time frame above, ATI TNCI shall be charged an additional Analog 2W Loops Service Order Charge for rescheduling the conversion to the New Conversion Time. 3.3.1.6 If ATI TNCI is not ready to accept service at the Scheduled Conversion Time or at a New Conversion Time, as applicable, an additional Service Order Charge shall apply. If Verizon is not available or ready to perform the conversion within thirty (30) minutes of the Scheduled Conversion Time or New Conversion Time, as applicable, Verizon and ATI TNCI will reschedule and, upon request from ATITNCI, Verizon will credit the Analog 2W Loop Service Order Charge for the original Scheduled Conversion Time. 3.3.1.7 The standard time interval expected from disconnection of a live Telephone Exchange Service to the connection of the Analog 2W Loops to ATI TNCI is fifteen (15) minutes per Analog 2W Loop for all orders consisting of twenty (20) Analog 2W Loops or less. Orders involving more than twenty (20) Loops will require a negotiated interval. 3.3.1.8 Conversions involving LNP will be completed according to North American Numbering Council (NANC) standards, via the regional Number Portability Administration Center (NPAC). 3.3.1.9 If ATI TNCI requires Analog 2W Loop conversions outside of the regularly scheduled Verizon RCCC operating hours, such conversions shall be separately negotiated. Additional charges (e.g. overtime labor charges) may apply for desired dates and times outside of regularly scheduled RCCC operating hours.

Conversion of Live Telephone Exchange Service to Analog 2W Loops. 3.3.1 The following coordination procedures shall apply to “live” cutovers of Verizon Customers who are converting their Telephone Exchange Services to ATI MLTC Telephone Exchange Services provisioned over Analog 2W unbundled Local Loops (“Analog 2W Loops) to be provided by Verizon to ATIMLTC: 3.3.1.1 Coordinated cutover charges shall apply to conversions of live Telephone Exchange Services to Analog 2W Loops. When an outside dispatch is required to perform a conversion, additional charges may apply. If ATI MLTC does not request a coordinated cutover, Verizon will process ATIMLTC’s order as a new installation subject to applicable standard provisioning intervals. 3.3.1.2 ATI MLTC shall request Analog 2W Loops for coordinated cutover from Verizon by delivering to Verizon a valid electronic Local Service Request (“LSR”). Xxxxxxx Verizon agrees to accept from ATI MLTC the date and time for the conversion designated on the LSR (“Scheduled Conversion Time”), provided that such designation is within the regularly scheduled operating hours of the Verizon Regional CLEC Control Center (“RCCC”) and subject to the availability of Verizon’s work force. In the event that XxxxxxxVerizon’s work force is not available, ATI MLTC and Verizon shall mutually agree on a New Conversion Time, as defined below. ATI MLTC shall designate the Scheduled Conversion Time subject to Verizon standard provisioning intervals as stated in the Verizon CLEC Handbook, as may be revised from time to time. Within three (3) Business Days of Verizon's receipt of such valid LSR, or as otherwise required by Applicable Law, Verizon shall provide ATI MLTC the scheduled due date for conversion of the Analog 2W Loops covered by such LSR. 3.3.1.3 ATI MLTC shall provide dial tone at the ATI MLTC collocation site at least forty-eight (48) hours prior to the Scheduled Conversion Time. 3.3.1.4 Either Party may contact the other Party to negotiate a new Scheduled Conversion Time (the “New Conversion Time”); provided, however, that each Party shall use commercially reasonable efforts to provide four (4) business hours’ advance notice to the other Party of its request for a New Conversion Time. Any Scheduled Conversion Time or New Conversion Time may not be rescheduled more than one (1) time in a Business Day, and any two New Conversion Times for a particular Analog 2W Loop shall differ by at least eight (8) hours, unless otherwise agreed to by the Parties. 3.3.1.5 If the New Conversion Time is more than one (1) business hour from the original Scheduled Conversion Time or from the previous New Conversion Time, the Party requesting such New Conversion Time shall be subject to the following: 3.3.1.5.1 If Verizon requests to reschedule outside of the one (1) hour time frame above, the Analog 2W Loops Service Order Charge for the original Scheduled Conversion Time or the previous New Conversion Time shall be credited upon request from ATIMLTC; and 3.3.1.5.2 If ATI MLTC requests to reschedule outside the one one (1) hour time frame above, ATI MLTC shall be charged an additional Analog 2W Loops Service Order Charge for rescheduling the conversion to the New Conversion Time. 3.3.1.6 If ATI MLTC is not ready to accept service at the Scheduled Conversion Time or at a New Conversion Time, as applicable, an additional Service Order Charge shall apply. If Verizon is not available or ready to perform the conversion within thirty (30) minutes of the Scheduled Conversion Time or New Conversion Time, as applicable, Verizon and ATI MLTC will reschedule and, upon request from ATIMLTC, Verizon will credit the Analog 2W Loop Service Order Charge for the original Scheduled Conversion Time. 3.3.1.7 The standard time interval expected from disconnection of a live Telephone Exchange Service to the connection of the Analog 2W Loops to ATI MLTC is fifteen (15) minutes per Analog 2W Loop for all orders consisting of twenty (20) Analog 2W Loops or less. Orders involving more than twenty (20) Loops will require a negotiated interval. 3.3.1.8 Conversions involving LNP will be completed according to North American Numbering Council (NANC) standards, via the regional Number Portability Administration Center (NPAC). 3.3.1.9 If ATI MLTC requires Analog 2W Loop conversions outside of the regularly scheduled Verizon RCCC operating hours, such conversions shall be separately negotiated. Additional charges (e.g. overtime labor charges) may apply for desired dates and times outside of regularly scheduled RCCC operating hours.

Conversion of Live Telephone Exchange Service to Analog 2W Loops. 3.3.1 The following coordination procedures shall apply to “live” cutovers of Verizon Customers who are converting their Telephone Exchange Services to ATI Syniverse Telephone Exchange Services provisioned over Analog 2W unbundled Local Loops (“Analog 2W Loops) to be provided by Verizon to ATISyniverse: 3.3.1.1 Coordinated cutover charges shall apply to conversions of live Telephone Exchange Services to Analog 2W Loops. When an outside dispatch is required to perform a conversion, additional charges may apply. If ATI Syniverse does not request a coordinated cutover, Verizon will process ATISyniverse’s order as a new installation subject to applicable standard provisioning intervals. 3.3.1.2 ATI Syniverse shall request Analog 2W Loops for coordinated cutover from Verizon by delivering to Verizon a valid electronic Local Service Request (“LSR”). Xxxxxxx Verizon agrees to accept from ATI Syniverse the date and time for the conversion designated on the LSR (“Scheduled Conversion Time”), provided that such designation is within the regularly scheduled operating hours of the Verizon Regional CLEC Control Center (“RCCC”) and subject to the availability of Verizon’s work force. In the event that XxxxxxxVerizon’s work force is not available, ATI Syniverse and Verizon shall mutually agree on a New Conversion Time, as defined below. ATI Syniverse shall designate the Scheduled Conversion Time subject to Verizon standard provisioning intervals as stated in the Verizon CLEC Handbook, as may be revised from time to time. Within three (3) Business Days of Verizon's receipt of such valid LSR, or as otherwise required by Applicable Lawthe Federal Unbundling Rules, Verizon shall provide ATI Syniverse the scheduled due date for conversion of the Analog 2W Loops covered by such LSR. 3.3.1.3 ATI Syniverse shall provide dial tone at the ATI Syniverse collocation site at least forty-eight (48) hours prior to the Scheduled Conversion Time. 3.3.1.4 Either Party may contact the other Party to negotiate a new Scheduled Conversion Time (the “New Conversion Time”); provided, however, that each Party shall use commercially reasonable efforts to provide four (4) business hours’ advance notice to the other Party of its request for a New Conversion Time. Any Scheduled Conversion Time or New Conversion Time may not be rescheduled more than one (1) time in a Business Day, and any two New Conversion Times for a particular Analog 2W Loop shall differ by at least eight (8) hours, unless otherwise agreed to by the Parties. 3.3.1.5 If the New Conversion Time is more than one (1) business hour from the original Scheduled Conversion Time or from the previous New Conversion Time, the Party requesting such New Conversion Time shall be subject to the following: 3.3.1.5.1 If Verizon requests to reschedule outside of the one (1) hour time frame above, the Analog 2W Loops Service Order Charge for the original Scheduled Conversion Time or the previous New Conversion Time shall be credited upon request from ATISyniverse; and 3.3.1.5.2 If ATI Syniverse requests to reschedule outside the one (1) hour time frame above, ATI Syniverse shall be charged an additional Analog 2W Loops Service Order Charge for rescheduling the conversion to the New Conversion Time. 3.3.1.6 If ATI Syniverse is not ready to accept service at the Scheduled Conversion Time or at a New Conversion Time, as applicable, an additional Service Order Charge shall apply. If Verizon is not available or ready to perform the conversion within thirty (30) minutes of the Scheduled Conversion Time or New Conversion Time, as applicable, Verizon and ATI Syniverse will reschedule and, upon request from ATISyniverse, Verizon will credit the Analog 2W Loop Service Order Charge for the original Scheduled Conversion Time. 3.3.1.7 The standard time interval expected from disconnection of a live Telephone Exchange Service to the connection of the Analog 2W Loops to ATI is fifteen (15) minutes per Analog 2W Loop for all orders consisting of twenty (20) Analog 2W Loops or less. Orders involving more than twenty (20) Loops will require a negotiated interval. 3.3.1.8 Conversions involving LNP will be completed according to North American Numbering Council (NANC) standards, via the regional Number Portability Administration Center (NPAC). 3.3.1.9 If ATI requires Analog 2W Loop conversions outside of the regularly scheduled Verizon RCCC operating hours, such conversions shall be separately negotiated. Additional charges (e.g. overtime labor charges) may apply for desired dates and times outside of regularly scheduled RCCC operating hours.Loop

Conversion of Live Telephone Exchange Service to Analog 2W Loops. 3.3.1 The following coordination procedures shall apply to “live” cutovers of Verizon Customers who are converting their Telephone Exchange Services to ATI WCS Telephone Exchange Services provisioned over Analog 2W unbundled Local Loops (“Analog 2W Loops) to be provided by Verizon to ATIWCS: 3.3.1.1 Coordinated cutover charges shall apply to conversions of live Telephone Exchange Services to Analog 2W Loops. When an outside dispatch is required to perform a conversion, additional charges may apply. If ATI WCS does not request a coordinated cutover, Verizon will process ATIWCS’s order as a new installation subject to applicable standard provisioning intervals. 3.3.1.2 ATI WCS shall request Analog 2W Loops for coordinated cutover from Verizon by delivering to Verizon a valid electronic Local Service Request (“LSR”). Xxxxxxx Verizon agrees to accept from ATI WCS the date and time for the conversion designated on the LSR (“Scheduled Conversion Time”), provided that such designation is within the regularly scheduled operating hours of the Verizon Regional CLEC Control Center (“RCCC”) and subject to the availability of Verizon’s work force. In the event that XxxxxxxVerizon’s work force is not available, ATI WCS and Verizon shall mutually agree on a New Conversion Time, as defined below. ATI WCS shall designate the Scheduled Conversion Time subject to Verizon standard provisioning intervals as stated in the Verizon CLEC Handbook, as may be revised from time to time. Within three (3) Business Days of Verizon's receipt of such valid LSR, or as otherwise required by Applicable Lawthe Federal Unbundling Rules, Verizon shall provide ATI WCS the scheduled due date for conversion of the Analog 2W Loops covered by such LSR. 3.3.1.3 ATI WCS shall provide dial tone at the ATI WCS collocation site at least forty-eight (48) hours prior to the Scheduled Conversion Time. 3.3.1.4 Either Party may contact the other Party to negotiate a new Scheduled Conversion Time (the “New Conversion Time”); provided, however, that each Party shall use commercially reasonable efforts to provide four (4) business hours’ advance notice to the other Party of its request for a New Conversion Time. Any Scheduled Conversion Time or New Conversion Time may not be rescheduled more than one (1) time in a Business Day, and any two New Conversion Times for a particular Analog 2W Loop shall differ by at least eight (8) hours, unless otherwise agreed to by the Parties. 3.3.1.5 If the New Conversion Time is more than one (1) business hour from the original Scheduled Conversion Time or from the previous New Conversion Time, the Party requesting such New Conversion Time shall be subject to the following: 3.3.1.5.1 If Verizon requests to reschedule outside of the one (1) hour time frame above, the Analog 2W Loops Service Order Charge for the original Scheduled Conversion Time or the previous New Conversion Time shall be credited upon request from ATIWCS; and 3.3.1.5.2 If ATI WCS requests to reschedule outside the one one (1) hour time frame above, ATI WCS shall be charged an additional Analog 2W Loops Service Order Charge for rescheduling the conversion to the New Conversion Time. 3.3.1.6 If ATI WCS is not ready to accept service at the Scheduled Conversion Time or at a New Conversion Time, as applicable, an additional Service Order Charge shall apply. If Verizon is not available or ready to perform the conversion within thirty (30) minutes of the Scheduled Conversion Time or New Conversion Time, as applicable, Verizon and ATI WCS will reschedule and, upon request from ATI, Verizon will credit the Analog 2W Loop Service Order Charge for the original Scheduled Conversion Time. 3.3.1.7 The standard time interval expected from disconnection of a live Telephone Exchange Service to the connection of the Analog 2W Loops to ATI is fifteen (15) minutes per Analog 2W Loop for all orders consisting of twenty (20) Analog 2W Loops or less. Orders involving more than twenty (20) Loops will require a negotiated interval. 3.3.1.8 Conversions involving LNP will be completed according to North American Numbering Council (NANC) standards, via the regional Number Portability Administration Center (NPAC). 3.3.1.9 If ATI requires Analog 2W Loop conversions outside of the regularly scheduled Verizon RCCC operating hours, such conversions shall be separately negotiated. Additional charges (e.g. overtime labor charges) may apply for desired dates and times outside of regularly scheduled RCCC operating hours.from

Conversion of Live Telephone Exchange Service to Analog 2W Loops. 3.3.1 The following coordination procedures shall apply to “live” cutovers of Verizon Customers who are converting their Telephone Exchange Services to ATI Advent Telephone Exchange Services provisioned over Analog 2W unbundled Local Loops (“Analog 2W Loops) to be provided by Verizon to ATIAdvent: 3.3.1.1 Coordinated cutover charges shall apply to conversions of live Telephone Exchange Services to Analog 2W Loops. When an outside dispatch is required to perform a conversion, additional charges may apply. If ATI Advent does not request a coordinated cutover, Verizon will process ATIAdvent’s order as a new installation subject to applicable standard provisioning intervals. 3.3.1.2 ATI Advent shall request Analog 2W Loops for coordinated cutover from Verizon by delivering to Verizon a valid electronic Local Service Request (“LSR”). Xxxxxxx Verizon agrees to accept from ATI Advent the date and time for the conversion designated on the LSR (“Scheduled Conversion Time”), provided that such designation is within the regularly scheduled operating hours of the Verizon Regional CLEC Control Center (“RCCC”) and subject to the availability of Verizon’s work force. In the event that XxxxxxxVerizon’s work force is not available, ATI Advent and Verizon shall mutually agree on a New Conversion Time, as defined below. ATI Advent shall designate the Scheduled Conversion Time subject to Verizon standard provisioning intervals as stated in the Verizon CLEC Handbook, as may be revised from time to time. Within three (3) Business Days of Verizon's receipt of such valid LSR, or as otherwise required by Applicable Law, Verizon shall provide ATI Advent the scheduled due date for conversion of the Analog 2W Loops covered by such LSR. 3.3.1.3 ATI Advent shall provide dial tone at the ATI collocation Advent Collocation site at least forty-eight (48) hours prior to the Scheduled Conversion Time. 3.3.1.4 Either Party may contact the other Party to negotiate a new Scheduled Conversion Time (the “New Conversion Time”); provided, however, that each Party shall use commercially reasonable efforts to provide four (4) business hours’ advance notice to the other Party of its request for a New Conversion Time. Any Scheduled Conversion Time or New Conversion Time may not be rescheduled more than one (1) time in a Business Day, and any two New Conversion Times for a particular Analog 2W Loop shall differ by at least eight (8) hours, unless otherwise agreed to by the Parties. 3.3.1.5 If the New Conversion Time is more than one (1) business hour from the original Scheduled Conversion Time or from the previous New Conversion Time, the Party requesting such New Conversion Time shall be subject to the following: 3.3.1.5.1 If Verizon requests to reschedule outside of the one (1) hour time frame above, the Analog 2W Loops Service Order Charge for the original Scheduled Conversion Time or the previous New Conversion Time shall be credited upon request from ATIAdvent; and 3.3.1.5.2 If ATI Advent requests to reschedule outside the one one (1) hour time frame above, ATI Advent shall be charged an additional Analog 2W Loops Service Order Charge for rescheduling the conversion to the New Conversion Time. 3.3.1.6 If ATI Advent is not ready to accept service at the Scheduled Conversion Time or at a New Conversion Time, as applicable, an additional Service Order Charge shall apply. If Verizon is not available or ready to perform the conversion within thirty (30) minutes of the Scheduled Conversion Time or New Conversion Time, as applicable, Verizon and ATI Advent will reschedule and, upon request from ATIAdvent, Verizon will credit the Analog 2W Loop Service Order Charge for the original Scheduled Conversion Time. 3.3.1.7 The standard time interval expected from disconnection of a live Telephone Exchange Service to the connection of the Analog 2W Loops to ATI Advent is fifteen (15) minutes per Analog 2W Loop for all orders consisting of twenty (20) Analog 2W Loops or less. Orders involving more than twenty (20) Loops will require a negotiated interval. 3.3.1.8 Conversions involving LNP will be completed according to North American Numbering Council (NANC) standards, via the regional Number Portability Administration Center (NPAC). 3.3.1.9 If ATI Advent requires Analog 2W Loop conversions outside of the regularly scheduled Verizon RCCC operating hours, such conversions shall be separately negotiated. Additional charges (e.g. overtime labor charges) may apply for desired dates and times outside of regularly scheduled RCCC operating hours.

Conversion of Live Telephone Exchange Service to Analog 2W Loops. 3.3.1 3.17.1 The following coordination procedures shall apply to “live” cutovers of Verizon Customers who are converting their Telephone Exchange Services to ATI OneStar Telephone Exchange Services provisioned over Analog 2W unbundled Local Loops (“Analog 2W Loops) to be provided by Verizon to ATIOneStar: 3.3.1.1 3.17.1.1 Coordinated cutover charges shall apply to conversions of live Telephone Exchange Services to Analog 2W Loops. When an outside dispatch is required to perform a conversion, additional charges may apply. If ATI OneStar does not request a coordinated cutover, Verizon will process ATIOneStar’s order as a new installation subject to applicable standard provisioning intervals. 3.3.1.2 ATI 3.17.1.2 OneStar shall request Analog 2W Loops for coordinated cutover from Verizon by delivering to Verizon a valid electronic Local Service Request (“LSR”). Xxxxxxx Verizon agrees to accept from ATI OneStar the date and time for the conversion designated on the LSR (“Scheduled Conversion Time”), provided that such designation is within the regularly scheduled operating hours of the Verizon Regional CLEC Control Center (“RCCC”) and subject to the availability of Verizon’s work force. In the event that XxxxxxxVerizon’s work force is not available, ATI OneStar and Verizon shall mutually agree on a New Conversion Time, as defined below. ATI OneStar shall designate the Scheduled Conversion Time subject to Verizon standard provisioning intervals as stated in the Verizon CLEC Handbook, as may be revised from time to time. Within three (3) Business Days of Verizon's receipt of such valid LSR, or as otherwise required by Applicable Law, Verizon shall provide ATI the scheduled due date for conversion of the Analog 2W Loops covered by such LSR.of 3.3.1.3 ATI 3.17.1.3 OneStar shall provide dial tone at the ATI collocation OneStar Collocation site at least forty-eight (48) hours prior to the Scheduled Conversion Time. 3.3.1.4 3.17.1.4 Either Party may contact the other Party to negotiate a new Scheduled Conversion Time (the “New Conversion Time”); provided, however, that each Party shall use commercially reasonable efforts to provide four (4) business hours’ advance notice to the other Party of its request for a New Conversion Time. Any Scheduled Conversion Time or New Conversion Time may not be rescheduled more than one (1) time in a Business Day, and any two New Conversion Times for a particular Analog 2W Loop shall differ by at least eight (8) hours, unless otherwise agreed to by the Parties. 3.3.1.5 3.17.1.5 If the New Conversion Time is more than one (1) business hour from the original Scheduled Conversion Time or from the previous New Conversion Time, the Party requesting such New Conversion Time shall be subject to the following: 3.3.1.5.1 3.17.1.5.1 If Verizon requests to reschedule outside of the one (1) hour time frame above, the Analog 2W Loops Service Order Charge for the original Scheduled Conversion Time or the previous New Conversion Time shall be credited waived upon request from ATIOneStar; and 3.3.1.5.2 3.17.1.5.2 If ATI OneStar requests to reschedule outside the one (1) hour time frame above, ATI OneStar shall be charged an additional Analog 2W Loops Service Order Charge for rescheduling the conversion to the New Conversion Time. 3.3.1.6 3.17.1.6 If ATI OneStar is not ready to accept service at the Scheduled Conversion Time or at a New Conversion Time, as applicable, an additional Service Order Charge shall apply. If Verizon is not available or ready to perform the conversion within thirty (30) minutes of the Scheduled Conversion Time or New Conversion Time, as applicable, Verizon and ATI OneStar will reschedule and, upon request from ATIOneStar, Verizon will credit waive the Analog 2W Loop Service Order Charge for the original Scheduled Conversion Time. 3.3.1.7 3.17.1.7 The standard time interval expected from disconnection of a live Telephone Exchange Service to the connection of the Analog 2W Loops to ATI OneStar is fifteen (15) minutes per Analog 2W Loop for all orders consisting of twenty (20) Analog 2W Loops or less. Orders involving more than twenty (20) Loops will require a negotiated interval. 3.3.1.8 3.17.1.8 Conversions involving LNP will be completed according to North American Numbering Council (“NANC”) standards, via the regional Number Portability Administration Center (NPAC).“NPAC”).‌‌‌‌‌‌ 3.3.1.9 3.17.1.9 If ATI OneStar requires Analog 2W Loop conversions outside of the regularly scheduled Verizon RCCC operating hours, such conversions shall be separately negotiated. Additional charges (e.g. overtime labor charges) may apply for desired dates and times outside of regularly scheduled RCCC operating hours.

Conversion of Live Telephone Exchange Service to Analog 2W Loops. 3.3.1 The following coordination procedures shall apply to “live” cutovers of Verizon Customers who are converting their Telephone Exchange Services to ATI API Telephone Exchange Services provisioned over Analog 2W unbundled Local Loops (“Analog 2W Loops) to be provided by Verizon to ATIAPI: 3.3.1.1 Coordinated cutover charges shall apply to conversions of live Telephone Exchange Services to Analog 2W Loops. When an outside dispatch is required to perform a conversion, additional charges may apply. If ATI API does not request a coordinated cutover, Verizon will process ATIAPI’s order as a new installation subject to applicable standard provisioning intervals. 3.3.1.2 ATI API shall request Analog 2W Loops for coordinated cutover from Verizon by delivering to Verizon a valid electronic Local Service Request (“LSR”). Xxxxxxx Verizon agrees to accept from ATI API the date and time for the conversion designated on the LSR (“Scheduled Conversion Time”), provided that such designation is within the regularly scheduled operating hours of the Verizon Regional CLEC Control Center (“RCCC”) and subject to the availability of Verizon’s work force. In the event that Xxxxxxx’s work force is not available, ATI API and Verizon shall mutually agree on a New Conversion Time, as defined below. ATI API shall designate the Scheduled Conversion Time subject to Verizon standard provisioning intervals as stated in the Verizon CLEC Handbook, as may be revised from time to time. Within three (3) Business Days of Verizon's receipt of such valid LSR, or as otherwise required by Applicable Law, Verizon shall provide ATI API the scheduled due date for conversion of the Analog 2W Loops covered by such LSR. 3.3.1.3 ATI API shall provide dial tone at the ATI collocation API Collocation site at least forty-eight (48) hours prior to the Scheduled Conversion Time. 3.3.1.4 Either Party may contact the other Party to negotiate a new Scheduled Conversion Time (the “New Conversion Time”); provided, however, that each Party shall use commercially reasonable efforts to provide four (4) business hours’ advance notice to the other Party of its request for a New Conversion Time. Any Scheduled Conversion Time or New Conversion Time may not be rescheduled more than one (1) time in a Business Day, and any two New Conversion Times for a particular Analog 2W Loop shall differ by at least eight (8) hours, unless otherwise agreed to by the Parties. 3.3.1.5 If the New Conversion Time is more than one (1) business hour from the original Scheduled Conversion Time or from the previous New Conversion Time, the Party requesting such New Conversion Time shall be subject to the following: 3.3.1.5.1 If Verizon requests to reschedule outside of the one (1) hour time frame above, the Analog 2W Loops Service Order Charge for the original Scheduled Conversion Time or the previous New Conversion Time shall be credited upon request from ATIAPI; and 3.3.1.5.2 If ATI API requests to reschedule outside the one (1) hour time frame above, ATI API shall be charged an additional Analog 2W Loops Service Order Charge for rescheduling the conversion to the New Conversion Time. 3.3.1.6 If ATI API is not ready to accept service at the Scheduled Conversion Time or at a New Conversion Time, as applicable, an additional Service Order Charge shall apply. If Verizon is not available or ready to perform the conversion within thirty (30) minutes of the Scheduled Conversion Time or New Conversion Time, as applicable, Verizon and ATI API will reschedule and, upon request from ATIAPI, Verizon will credit the Analog 2W Loop Service Order Charge for the original Scheduled Conversion Time. 3.3.1.7 The standard time interval expected from disconnection of a live Telephone Exchange Service to the connection of the Analog 2W Loops to ATI API is fifteen (15) minutes per Analog 2W Loop for all orders consisting of twenty (20) Analog 2W Loops or less. Orders involving more than twenty (20) Loops will require a negotiated interval. 3.3.1.8 Conversions involving LNP will be completed according to North American Numbering Council (NANC) standards, via the regional Number Portability Administration Center (NPAC). 3.3.1.9 If ATI API requires Analog 2W Loop conversions outside of the regularly scheduled Verizon RCCC operating hours, such conversions shall be separately negotiated. Additional charges (e.g. overtime labor charges) may apply for desired dates and times outside of regularly scheduled RCCC operating hours.

Conversion of Live Telephone Exchange Service to Analog 2W Loops. 3.3.1 3.17.1 The following coordination procedures shall apply to “live” cutovers of Verizon Customers who are converting their Telephone Exchange Services to ATI NTE Telephone Exchange Services provisioned over Analog 2W unbundled Local Loops (“Analog 2W Loops) to be provided by Verizon to ATINTE: 3.3.1.1 3.17.1.1 Coordinated cutover charges shall apply to conversions of live Telephone Exchange Services to Analog 2W Loops. When an outside dispatch is required to perform a conversion, additional charges may apply. If ATI NTE does not request a coordinated cutover, Verizon will process ATINTE’s order as a new installation subject to applicable standard provisioning intervals. 3.3.1.2 ATI 3.17.1.2 NTE shall request Analog 2W Loops for coordinated cutover from Verizon by delivering to Verizon a valid electronic Local Service Request (“LSR”). Xxxxxxx Verizon agrees to accept from ATI NTE the date and time for the conversion designated on the LSR (“Scheduled Conversion Time”), provided that such designation is within the regularly scheduled operating hours of the Verizon Regional CLEC Control Center (“RCCC”) and subject to the availability of Verizon’s work force. In the event that XxxxxxxVerizon’s work force is not available, ATI NTE and Verizon shall mutually agree on a New Conversion Time, as defined below. ATI NTE shall designate the Scheduled Conversion Time subject to Verizon standard provisioning intervals as stated in the Verizon CLEC Handbook, as may be revised from time to time. Within three (3) Business Days of Verizon's receipt of such valid LSR, or as otherwise required by Applicable Law, Verizon shall provide ATI NTE the scheduled due date for conversion of the Analog 2W Loops covered by such LSR. 3.3.1.3 ATI 3.17.1.3 NTE shall provide dial tone at the ATI collocation NTE Collocation site at least forty-eight (48) hours prior to the Scheduled Conversion Time. 3.3.1.4 3.17.1.4 Either Party may contact the other Party to negotiate a new Scheduled Conversion Time (the “New Conversion Time”); provided, however, that each Party shall use commercially reasonable efforts to provide four (4) business hours’ advance notice to the other Party of its request for a New Conversion Time. Any Scheduled Conversion Time or New Conversion Time may not be rescheduled more than one (1) time in a Business Daybusiness day, and any two New Conversion Times for a particular Analog 2W Loop shall differ by at least eight (8) hours, unless otherwise agreed to by the Parties. 3.3.1.5 3.17.1.5 If the New Conversion Time is more than one (1) business hour from the original Scheduled Conversion Time or from the previous New Conversion Time, the Party requesting such New Conversion Time shall be subject to the following: 3.3.1.5.1 3.17.1.5.1 If Verizon requests to reschedule outside of the one (1) hour time frame above, the Analog 2W Loops Service Order Charge for the original Scheduled Conversion Time or the previous New Conversion Time shall be credited waived upon request from ATINTE; and 3.3.1.5.2 3.17.1.5.2 If ATI NTE requests to reschedule outside the one one (1) hour time frame above, ATI NTE shall be charged an additional Analog 2W Loops Service Order Charge for rescheduling the conversion to the New Conversion Time. 3.3.1.6 3.17.1.6 If ATI NTE is not ready to accept service at the Scheduled Conversion Time or at a New Conversion Time, as applicable, an additional Service Order Charge shall apply. If Verizon is not available or ready to perform the conversion within thirty (30) minutes of the Scheduled Conversion Time or New Conversion Time, as applicable, Verizon and ATI NTE will reschedule and, upon request from ATINTE, Verizon will credit waive the Analog 2W Loop Service Order Charge for the original Scheduled Conversion Time. 3.3.1.7 3.17.1.7 The standard time interval expected from disconnection of a live Telephone Exchange Service to the connection of the Analog 2W Loops to ATI NTE is fifteen (15) minutes per Analog 2W Loop for all orders consisting of twenty (20) Analog 2W Loops or less. Orders involving more than twenty (20) Loops will require a negotiated interval. 3.3.1.8 3.17.1.8 Conversions involving LNP will be completed according to North American Numbering Council (“NANC”) standards, via the regional Number Portability Administration Center (“NPAC”). 3.3.1.9 3.17.1.9 If ATI NTE requires Analog 2W Loop conversions outside of the regularly scheduled Verizon RCCC operating hours, such conversions shall be separately negotiated. Additional charges (e.g. overtime labor charges) may apply for desired dates and times outside of regularly scheduled RCCC operating hours.

Conversion of Live Telephone Exchange Service to Analog 2W Loops. 3.3.1 3.17.1 The following coordination procedures shall apply to “live” cutovers of Verizon Customers who are converting their Telephone Exchange Services to ATI Prepaid Telephone Exchange Services provisioned over Analog 2W unbundled Local Loops (“Analog 2W Loops) to be provided by Verizon to ATIPrepaid: 3.3.1.1 3.17.1.1 Coordinated cutover charges shall apply to conversions of live Telephone Exchange Services to Analog 2W Loops. When an outside dispatch is required to perform a conversion, additional charges may apply. If ATI Prepaid does not request a coordinated cutover, Verizon will process ATIPrepaid’s order as a new installation subject to applicable standard provisioning intervals. 3.3.1.2 ATI 3.17.1.2 Prepaid shall request Analog 2W Loops for coordinated cutover from Verizon by delivering to Verizon a valid electronic Local Service Request (“LSR”). Xxxxxxx agrees to accept from ATI Prepaid the date and time for the conversion designated on the LSR (“Scheduled Conversion Time”), provided that such designation is within the regularly scheduled operating hours of the Verizon Regional CLEC Control Center (“RCCC”) and subject to the availability of Verizon’s work force. In the event that Xxxxxxx’s work force is not available, ATI Prepaid and Verizon shall mutually agree on a New Conversion Time, as defined below. ATI Prepaid shall designate the Scheduled Conversion Time subject to Verizon standard provisioning intervals as stated in the Verizon CLEC Handbook, as may be revised from time to time. Within three (3) Business Days of Verizon's receipt of such valid LSR, or as otherwise required by Applicable Law, Verizon shall provide ATI Prepaid the scheduled due date for conversion of the Analog 2W Loops covered by such LSR. 3.3.1.3 ATI 3.17.1.3 Prepaid shall provide dial tone at the ATI collocation Prepaid Collocation site at least forty-eight (48) hours prior to the Scheduled Conversion Time. 3.3.1.4 3.17.1.4 Either Party may contact the other Party to negotiate a new Scheduled Conversion Time (the “New Conversion Time”); provided, however, that each Party shall use commercially reasonable efforts to provide four (4) business hours’ advance notice to the other Party of its request for a New Conversion Time. Any Scheduled Conversion Time or New Conversion Time may not be rescheduled more than one (1) time in a Business Day, and any two New Conversion Times for a particular Analog 2W Loop shall differ by at least eight (8) hours, unless otherwise agreed to by the Parties. 3.3.1.5 3.17.1.5 If the New Conversion Time is more than one (1) business hour from the original Scheduled Conversion Time or from the previous New Conversion Time, the Party requesting such New Conversion Time shall be subject to the following: 3.3.1.5.1 3.17.1.5.1 If Verizon requests to reschedule outside of the one (1) hour time frame above, the Analog 2W Loops Service Order Charge for the original Scheduled Conversion Time or the previous New Conversion Time shall be credited waived upon request from ATIPrepaid; and 3.3.1.5.2 3.17.1.5.2 If ATI Prepaid requests to reschedule outside the one (1) hour time frame above, ATI Prepaid shall be charged an additional Analog 2W Loops Service Order Charge for rescheduling the conversion to the New Conversion Time. 3.3.1.6 3.17.1.6 If ATI Prepaid is not ready to accept service at the Scheduled Conversion Time or at a New Conversion Time, as applicable, an additional Service Order Charge shall apply. If Verizon is not available or ready to perform the conversion within thirty (30) minutes of the Scheduled Conversion Time or New Conversion Time, as applicable, Verizon and ATI Prepaid will reschedule and, upon request from ATIPrepaid, Verizon will credit waive the Analog 2W Loop Service Order Charge for the original Scheduled Conversion Time. 3.3.1.7 3.17.1.7 The standard time interval expected from disconnection of a live Telephone Exchange Service to the connection of the Analog 2W Loops to ATI Prepaid is fifteen (15) minutes per Analog 2W Loop for all orders consisting of twenty (20) Analog 2W Loops or less. Orders involving more than twenty (20) Loops will require a negotiated interval. 3.3.1.8 3.17.1.8 Conversions involving LNP will be completed according to North American Numbering Council (“NANC”) standards, via the regional Number Portability Administration Center (“NPAC”). 3.3.1.9 3.17.1.9 If ATI Prepaid requires Analog 2W Loop conversions outside of the regularly scheduled Verizon RCCC operating hours, such conversions shall be separately negotiated. Additional charges (e.g. overtime labor charges) may apply for desired dates and times outside of regularly scheduled RCCC operating hours.

Conversion of Live Telephone Exchange Service to Analog 2W Loops. 3.3.1 3.17.1 The following coordination procedures shall apply to “live” cutovers of Verizon Customers who are converting their Telephone Exchange Services to ATI AURA Telephone Exchange Services provisioned over Analog 2W unbundled Local Loops (“Analog 2W Loops) to be provided by Verizon to ATIAURA: 3.3.1.1 3.17.1.1 Coordinated cutover charges shall apply to conversions of live Telephone Exchange Services to Analog 2W Loops. When an outside dispatch is required to perform a conversion, additional charges may apply. If ATI AURA does not request a coordinated cutover, Verizon will process ATIAURA’s order as a new installation subject to applicable standard provisioning intervals. 3.3.1.2 ATI 3.17.1.2 AURA shall request Analog 2W Loops for coordinated cutover from Verizon by delivering to Verizon a valid electronic Local Service Request (“LSR”). Xxxxxxx Verizon agrees to accept from ATI AURA the date and time for the conversion designated on the LSR (“Scheduled Conversion Time”), provided that such designation is within the regularly scheduled operating hours of the Verizon Regional CLEC Control Center (“RCCC”) and subject to the availability of Verizon’s work force. In the event that XxxxxxxVerizon’s work force is not available, ATI AURA and Verizon shall mutually agree on a New Conversion Time, as defined below. ATI AURA shall designate the Scheduled Conversion Time subject to Verizon standard provisioning intervals as stated in the Verizon CLEC Handbook, as may be revised from time to time. Within three (3) Business Days business days of Verizon's receipt of such valid LSR, or as otherwise required by Applicable Law, Verizon shall provide ATI AURA the scheduled due date for conversion of the Analog 2W Loops covered by such LSR. 3.3.1.3 ATI 3.17.1.3 AURA shall provide dial tone at the ATI collocation AURA Collocation site at least forty-eight (48) hours prior to the Scheduled Conversion Time. 3.3.1.4 3.17.1.4 Either Party may contact the other Party to negotiate a new Scheduled Conversion Time (the “New Conversion Time”); provided, however, that each Party shall use commercially reasonable efforts to provide four (4) business hours’ advance notice to the other Party of its request for a New Conversion Time. Any Scheduled Conversion Time or New Conversion Time may not be rescheduled more than one one (1) time in a Business Daybusiness day, and any two New Conversion Times for a particular Analog 2W Loop Loops shall differ by at least eight (8) hours, unless otherwise agreed to by the Parties. 3.3.1.5 3.17.1.5 If the New Conversion Time is more than one (1) business hour from the original Scheduled Conversion Time or from the previous New Conversion Time, the Party requesting such New Conversion Time shall be subject to the following: 3.3.1.5.1 3.17.1.5.1 If Verizon requests to reschedule outside of the one (1) hour time frame above, the Analog 2W Loops Service Order Charge for the original Scheduled Conversion Time or the previous New Conversion Time shall be credited waived upon request from ATIAURA; and 3.3.1.5.2 3.17.1.5.2 If ATI AURA requests to reschedule outside the one (1) hour time frame above, ATI AURA shall be charged an additional Analog 2W Loops Service Order Charge for rescheduling the conversion to the New Conversion Time. 3.3.1.6 3.17.1.6 If ATI AURA is not ready to accept service at the Scheduled Conversion Time or at a New Conversion Time, as applicable, an additional Service Order Charge shall apply. If Verizon is not available or ready to perform the conversion within thirty (30) minutes of the Scheduled Conversion Time or New Conversion Time, as applicable, Verizon and ATI AURA will reschedule and, upon request from ATIAURA, Verizon will credit waive the Analog 2W Loop Service Order Charge for the original Scheduled Conversion Time. 3.3.1.7 3.17.1.7 The standard time interval expected from disconnection of a live Telephone Exchange Service to the connection of the Analog 2W Loops to ATI AURA is fifteen (15) minutes per Analog 2W Loop for all orders consisting of twenty (20) Analog 2W Loops or less. Orders involving more than twenty (20) Loops will require a negotiated interval. 3.3.1.8 3.17.1.8 Conversions involving LNP will be completed according to North American Numbering Council (“NANC”) standards, via the regional Number Portability Administration Center (“NPAC”). 3.3.1.9 3.17.1.9 If ATI AURA requires Analog 2W Loop conversions outside of the regularly scheduled Verizon RCCC operating hours, such conversions shall be separately negotiated. Additional charges (e.g. overtime labor charges) may apply for desired dates and times outside of regularly scheduled RCCC operating hours.

Conversion of Live Telephone Exchange Service to Analog 2W Loops. 3.3.1 3.17.1 The following coordination procedures shall apply to “live” cutovers of Verizon Customers who are converting their Telephone Exchange Services to ATI Snappy Phone Telephone Exchange Services provisioned over Analog 2W unbundled Local Loops (“Analog 2W Loops) to be provided by Verizon to ATISnappy Phone: 3.3.1.1 3.17.1.1 Coordinated cutover charges shall apply to conversions of live Telephone Exchange Services to Analog 2W Loops. When an outside dispatch is required to perform a conversion, additional charges may apply. If ATI Snappy Phone does not request a coordinated cutover, Verizon will process ATISnappy Phone’s order as a new installation subject to applicable standard provisioning intervals. 3.3.1.2 ATI 3.17.1.2 Snappy Phone shall request Analog 2W Loops for coordinated cutover from Verizon by delivering to Verizon a valid electronic Local Service Request (“LSR”). Xxxxxxx Verizon agrees to accept from ATI Snappy Phone the date and time for the conversion designated on the LSR (“Scheduled Conversion Time”), provided that such designation is within the regularly scheduled operating hours of the Verizon Regional CLEC Control Center (“RCCC”) and subject to the availability of Verizon’s work force. In the event that Xxxxxxx’s work force is not available, ATI Snappy Phone and Verizon shall mutually agree on a New Conversion Time, as defined below. ATI Snappy Phone shall designate the Scheduled Conversion Time subject to Verizon standard provisioning intervals as stated in the Verizon CLEC Handbook, as may be revised from time to time. Within three (3) Business Days of Verizon's receipt of such valid LSR, or as otherwise required by Applicable Law, Verizon shall provide ATI Snappy Phone the scheduled due date for conversion of the Analog 2W Loops covered by such LSR. 3.3.1.3 ATI 3.17.1.3 Snappy Phone shall provide dial tone at the ATI collocation Snappy Phone Collocation site at least forty-eight (48) hours prior to the Scheduled Conversion Time. 3.3.1.4 3.17.1.4 Either Party may contact the other Party to negotiate a new Scheduled Conversion Time (the “New Conversion Time”); provided, however, that each Party shall use commercially reasonable efforts to provide four (4) business hours’ advance notice to the other Party of its request for a New Conversion Time. Any Scheduled Conversion Time or New Conversion Time may not be rescheduled more than one (1) time in a Business Day, and any two New Conversion Times for a particular Analog 2W Loop shall differ by at least eight (8) hours, unless otherwise agreed to by the Parties. 3.3.1.5 3.17.1.5 If the New Conversion Time is more than one (1) business hour from the original Scheduled Conversion Time or from the previous New Conversion Time, the Party requesting such New Conversion Time shall be subject to the following: 3.3.1.5.1 3.17.1.5.1 If Verizon requests to reschedule outside of the one (1) hour time frame above, the Analog 2W Loops Service Order Charge for the original Scheduled Conversion Time or the previous New Conversion Time shall be credited waived upon request from ATISnappy Phone; and 3.3.1.5.2 3.17.1.5.2 If ATI Snappy Phone requests to reschedule outside the one (1) hour time frame above, ATI Snappy Phone shall be charged an additional Analog 2W Loops Service Order Charge for rescheduling the conversion to the New Conversion Time. 3.3.1.6 3.17.1.6 If ATI Snappy Phone is not ready to accept service at the Scheduled Conversion Time or at a New Conversion Time, as applicable, an additional Service Order Charge shall apply. If Verizon is not available or ready to perform the conversion within thirty (30) minutes of the Scheduled Conversion Time or New Conversion Time, as applicable, Verizon and ATI Snappy Phone will reschedule and, upon request from ATISnappy Phone, Verizon will credit waive the Analog 2W Loop Service Order Charge for the original Scheduled Conversion Time. 3.3.1.7 3.17.1.7 The standard time interval expected from disconnection of a live Telephone Exchange Service to the connection of the Analog 2W Loops to ATI Snappy Phone is fifteen (15) minutes per Analog 2W Loop for all orders consisting of twenty (20) Analog 2W Loops or less. Orders involving more than twenty (20) Loops will require a negotiated interval. 3.3.1.8 3.17.1.8 Conversions involving LNP will be completed according to North American Numbering Council (“NANC”) standards, via the regional Number Portability Administration Center (“NPAC”). 3.3.1.9 3.17.1.9 If ATI Snappy Phone requires Analog 2W Loop conversions outside of the regularly scheduled Verizon RCCC operating hours, such conversions shall be separately negotiated. Additional charges (e.g. overtime labor charges) may apply for desired dates and times outside of regularly scheduled RCCC operating hours.

Conversion of Live Telephone Exchange Service to Analog 2W Loops. 3.3.1 3.17.1 The following coordination procedures shall apply to “live” cutovers of Verizon Customers who are converting their Telephone Exchange Services to ATI BTI Telephone Exchange Services provisioned over Analog 2W unbundled Local Loops (“Analog 2W Loops) to be provided by Verizon to ATIBTI: 3.3.1.1 3.17.1.1 Coordinated cutover charges shall apply to Loop conversions of live Telephone Exchange Services to Analog 2W Loops. When an outside dispatch is required to perform a conversion, additional charges may apply. If ATI BTI does not request a coordinated cutover, Verizon will process ATIBTI’s order as a new installation subject to applicable standard provisioning intervals. 3.3.1.2 ATI 3.17.1.2 BTI shall request Analog 2W Loops for coordinated cutover from Verizon by delivering to Verizon a valid electronic Local Service Request (“LSR”). Xxxxxxx Verizon agrees to accept from ATI BTI the date and time for the conversion designated on the LSR (“Scheduled Conversion Time”), provided that such designation is within the regularly scheduled operating hours of the Verizon Regional CLEC Control Center (“RCCC”) and subject to the availability of Verizon’s work force. In the event that Xxxxxxx’s work force is not available, ATI BTI and Verizon shall mutually agree on a New Conversion Time, as defined below. ATI BTI shall designate the Scheduled Conversion Time subject to Verizon standard provisioning intervals as stated in the Verizon CLEC Handbook, as may be revised from time to time. Within three (3) Business Days business days of Verizon's receipt of such valid LSR, or as otherwise required by Applicable Law, Verizon shall provide ATI BTI the scheduled due date for conversion of the Analog 2W Loops covered by such LSR. 3.3.1.3 ATI 3.17.1.3 BTI shall provide dial tone at the ATI collocation BTI Collocation site at least forty-eight (48) hours prior to the Scheduled Conversion Time. 3.3.1.4 3.17.1.4 Either Party may contact the other Party to negotiate a new Scheduled Conversion Time (the “New Conversion Time”); provided, however, that each Party shall use commercially reasonable efforts to provide four (4) business hours’ advance notice to the other Party of its request for a New Conversion Time. Any Scheduled Conversion Time or New Conversion Time may not be rescheduled more than one one (1) time in a Business Daybusiness day, and any two New Conversion Times for a particular Analog 2W Loop Loops shall differ by at least eight (8) hours, unless otherwise agreed to by the Parties. 3.3.1.5 3.17.1.5 If the New Conversion Time is more than one (1) business hour from the original Scheduled Conversion Time or from the previous New Conversion Time, the Party requesting such New Conversion Time shall be subject to the following: 3.3.1.5.1 3.17.1.5.1 If Verizon requests to reschedule outside of the one (1) hour time frame above, the Analog 2W Loops Service Order Charge for the original Scheduled Conversion Time or the previous New Conversion Time shall be credited waived upon request from ATIBTI, so long as BTI or it agent is not directly at fault for the rescheduling; and 3.3.1.5.2 3.17.1.5.2 If ATI BTI requests to reschedule outside the one (1) hour time frame above, ATI BTI shall be charged an additional Analog 2W Loops Service Order Charge for rescheduling the conversion to the New Conversion TimeTime so long as Verizon or its agent is not directly at fault for the rescheduling. 3.3.1.6 3.17.1.6 If ATI BTI is not ready to accept service at the Scheduled Conversion Time or at a New Conversion Time, as applicable, an additional Service Order Charge shall apply. If Verizon is not available or ready to perform the conversion within thirty (30) minutes of the Scheduled Conversion Time or New Conversion Time, as applicable, Verizon and ATI will reschedule and, upon request from ATI, Verizon will credit the Analog 2W Loop Service Order Charge for the original Scheduled Conversion Time. 3.3.1.7 The standard time interval expected from disconnection of a live Telephone Exchange Service to the connection of the Analog 2W Loops to ATI is fifteen (15) minutes per Analog 2W Loop for all orders consisting of twenty (20) Analog 2W Loops or less. Orders involving more than twenty (20) Loops will require a negotiated interval. 3.3.1.8 Conversions involving LNP will be completed according to North American Numbering Council (NANC) standards, via the regional Number Portability Administration Center (NPAC). 3.3.1.9 If ATI requires Analog 2W Loop conversions outside of the regularly scheduled Verizon RCCC operating hours, such conversions shall be separately negotiated. Additional charges (e.g. overtime labor charges) may apply for desired dates and times outside of regularly scheduled RCCC operating hours.thirty

Conversion of Live Telephone Exchange Service to Analog 2W Loops. 3.3.1 3.17.1 The following coordination procedures shall apply to “live” cutovers of Verizon Customers who are converting their Telephone Exchange Services to ATI Velocity Telephone Exchange Services provisioned over Analog 2W unbundled Local Loops (“Analog 2W Loops) to be provided by Verizon to ATIVelocity: 3.3.1.1 3.17.1.1 Coordinated cutover charges shall apply to conversions of live Telephone Exchange Services to Analog 2W Loops. When an outside dispatch is required to perform a conversion, additional charges may apply. If ATI Velocity does not request a coordinated cutover, Verizon will process ATIVelocity’s order as a new installation subject to applicable standard provisioning intervals. 3.3.1.2 ATI 3.17.1.2 Velocity shall request Analog 2W Loops for coordinated cutover from Verizon by delivering to Verizon a valid electronic Local Service Request (“LSR”). Xxxxxxx Verizon agrees to accept from ATI Velocity the date and time for the conversion designated on the LSR (“Scheduled Conversion Time”), provided that such designation is within the regularly scheduled operating hours of the Verizon Regional CLEC Control Center (“RCCC”) and subject to the availability of Verizon’s work force. In the event that XxxxxxxVerizon’s work force is not available, ATI Velocity and Verizon shall mutually agree on a New Conversion Time, as defined below. ATI Velocity shall designate the Scheduled Conversion Time subject to Verizon standard provisioning intervals as stated in the Verizon CLEC Handbook, as may be revised from time to time. Within three (3) Business Days of Verizon's receipt of such valid LSR, or as otherwise required by Applicable Law, Verizon shall provide ATI Velocity the scheduled due date for conversion of the Analog 2W Loops covered by such LSR. 3.3.1.3 ATI 3.17.1.3 Velocity shall provide dial tone at the ATI collocation Velocity Collocation site at least forty-eight (48) hours prior to the Scheduled Conversion Time. 3.3.1.4 3.17.1.4 Either Party may contact the other Party to negotiate a new Scheduled Conversion Time (the “New Conversion Time”); provided, however, that each Party shall use commercially reasonable efforts to provide four (4) business hours’ advance notice to the other Party of its request for a New Conversion Time. Any Scheduled Conversion Time or New Conversion Time may not be rescheduled more than one (1) time in a Business Day, and any two New Conversion Times for a particular Analog 2W Loop Loops shall differ by at least eight (8) hours, unless otherwise agreed to by the Parties. 3.3.1.5 3.17.1.5 If the New Conversion Time is more than one (1) business hour from the original Scheduled Conversion Time or from the previous New Conversion Time, the Party requesting such New Conversion Time shall be subject to the following: 3.3.1.5.1 3.17.1.5.1 If Verizon requests to reschedule outside of the one (1) hour time frame above, the Analog 2W Loops Service Order Charge for the original Scheduled Conversion Time or the previous New Conversion Time shall be credited waived upon request from ATIVelocity; and 3.3.1.5.2 3.17.1.5.2 If ATI Velocity requests to reschedule outside the one (1) hour time frame above, ATI Velocity shall be charged an additional Analog 2W Loops Service Order Charge for rescheduling the conversion to the New Conversion Time. 3.3.1.6 3.17.1.6 If ATI Velocity is not ready to accept service at the Scheduled Conversion Time or at a New Conversion Time, as applicable, an additional Service Order Charge shall apply. If Verizon is not available or ready to perform the conversion within thirty (30) minutes of the Scheduled Conversion Time or New Conversion Time, as applicable, Verizon and ATI Velocity will reschedule and, upon request from ATIVelocity, Verizon will credit waive the Analog 2W Loop Service Order Charge for the original Scheduled Conversion Time. 3.3.1.7 3.17.1.7 The standard time interval expected from disconnection of a live Telephone Exchange Service to the connection of the Analog 2W Loops to ATI Velocity is fifteen (15) minutes per Analog 2W Loop for all orders consisting of twenty (20) Analog 2W Loops or less. Orders involving more than twenty (20) Loops will require a negotiated interval. 3.3.1.8 3.17.1.8 Conversions involving LNP will be completed according to North American Numbering Council (“NANC”) standards, via the regional Number Portability Administration Center (“NPAC”). 3.3.1.9 3.17.1.9 If ATI Velocity requires Analog 2W Loop conversions outside of the regularly scheduled Verizon RCCC operating hours, such conversions shall be separately negotiated. Additional charges (e.g. overtime labor charges) may apply for desired dates and times outside of regularly scheduled RCCC operating hours.

Conversion of Live Telephone Exchange Service to Analog 2W Loops. 3.3.1 The following coordination procedures shall apply to “live” cutovers of Verizon Customers who are converting their Telephone Exchange Services to ATI AT&T Broadband Telephone Exchange Services provisioned over Analog 2W unbundled Local Loops (“Analog 2W LoopsLoop’s) to be provided by Verizon to ATI:AT&T Broadband. 3.3.1.1 Coordinated 11.9.1 Subject to approval by the Department, coordinated cutover charges shall apply to conversions of live Telephone Exchange Services to Analog 2W Loops. When an outside dispatch is required to perform a conversion, additional charges may apply. If ATI AT&T Broadband does not request a coordinated cutover, Verizon will process ATIAT&T Broadband’s order as a new installation subject to applicable standard provisioning intervals. 3.3.1.2 ATI 11.9.2 AT&T Broadband shall request Analog 2W Loops for coordinated cutover from Verizon by delivering to Verizon a valid electronic Local Service Request (“LSR”). Xxxxxxx Verizon agrees to accept from ATI AT&T Broadband the date and time for the conversion designated on the LSR (“Scheduled Conversion Time”), provided that such designation is within the regularly scheduled operating hours of the Verizon Regional CLEC Control Center (“RCCC”) and subject to the availability of Verizon’s work force. In the event that XxxxxxxVerizon’s work force is not available, ATI AT&T Broadband and Verizon shall mutually agree on a New Conversion Time, as defined below. ATI AT&T Broadband shall designate the Scheduled Conversion Time subject to Verizon standard provisioning intervals as stated in the Verizon CLEC Handbook, as may be revised from time to time. Within three two (32) Business Days business days of Verizon's ’s receipt of such valid LSR, or as otherwise required by Applicable Law, Verizon shall provide ATI AT&T Broadband the scheduled due firm order commitment (“FOC”) date for conversion of by which the Analog 2W Loops covered by such LSRLSR will be converted. 3.3.1.3 ATI 11.9.3 AT&T Broadband shall provide dial tone at the ATI collocation AT&T Broadband Collocation site at least forty-eight (48) hours prior to the Scheduled Conversion Time. 3.3.1.4 11.9.4 Either Party may contact the other Party to negotiate a new Scheduled Conversion Time (the “New Conversion Time”); provided, however, that each Party shall use commercially reasonable efforts to provide four (4) business hours’ hours advance notice to the other Party of its request for a New Conversion Time. Any Scheduled Conversion Time or New Conversion Time may not be rescheduled more than one one (1) time in a Business Daybusiness day, and any two New Conversion Times for a particular Analog 2W Loop Loops shall differ by at least eight (8) hours, unless otherwise agreed to by the Parties. 3.3.1.5 11.9.4.1 If the New Conversion Time is more than one (1) business hour from the original Scheduled Conversion Time or from the previous New Conversion Time, the Party requesting such New Conversion Time shall be subject to the following: 3.3.1.5.1 (i) If Verizon requests to reschedule outside of the one (1) hour time frame above, the Analog 2W Loops Service Order Charge for the original Scheduled Conversion Time or the previous New Conversion Time shall be credited waived upon request from ATIAT&T Broadband; and 3.3.1.5.2 (ii) If ATI AT&T Broadband requests to reschedule outside the one (1) hour time frame above, ATI AT&T Broadband shall be charged an additional Analog 2W Loops Service Order Charge for rescheduling the conversion to the New Conversion Time. 3.3.1.6 11.9.5 If ATI AT&T Broadband is not ready to accept service at the Scheduled Conversion Time or at a New Conversion Time, as applicable, an additional Service Order Charge shall apply. If Verizon is not available or ready to perform the conversion within thirty (30) minutes of the Scheduled Conversion Time or New Conversion Time, as applicable, Verizon and ATI AT&T Broadband will reschedule and, upon request from ATIAT&T Broadband, Verizon will credit waive the Analog 2W Loop Service Order Charge for the original Scheduled Conversion Time. 3.3.1.7 11.9.6 The standard time interval expected from disconnection of a live Telephone Exchange Service to the connection of the Analog 2W Loops to ATI AT&T Broadband is fifteen (15) minutes per Analog 2W Loop Loops for all orders consisting of twenty (20) Analog 2W Loops or less. Orders involving more than twenty (20) Loops will require a negotiated interval. 3.3.1.8 11.9.7 Conversions involving LNP will be completed according to North American Numbering Council (“NANC”) standards, via the regional Number Portability Administration Center (“NPAC”). 3.3.1.9 11.9.8 If ATI AT&T Broadband requires Analog 2W Loop Loops conversions outside of the regularly scheduled Verizon RCCC operating hours, such conversions shall be separately negotiated. Additional charges (e.g. overtime labor charges) may apply for desired dates and times outside of regularly scheduled RCCC operating hours.

Conversion of Live Telephone Exchange Service to Analog 2W Loops. 3.3.1 3.17.1 The following coordination procedures shall apply to “live” cutovers of Verizon Customers who are converting their Telephone Exchange Services to ATI Talk Unlimited Telephone Exchange Services provisioned over Analog 2W unbundled Local Loops (“Analog 2W Loops) to be provided by Verizon to ATITalk Unlimited: 3.3.1.1 3.17.1.1 Coordinated cutover charges shall apply to conversions of live Telephone Exchange Services to Analog 2W Loops. When an outside dispatch is required to perform a conversion, additional charges may apply. If ATI Talk Unlimited does not request a coordinated cutover, Verizon will process ATITalk Unlimited’s order as a new installation subject to applicable standard provisioning intervals. 3.3.1.2 ATI 3.17.1.2 Talk Unlimited shall request Analog 2W Loops for coordinated cutover from Verizon by delivering to Verizon a valid electronic Local Service Request (“LSR”). Xxxxxxx Verizon agrees to accept from ATI Talk Unlimited the date and time for the conversion designated on the LSR (“Scheduled Conversion Time”), provided that such designation is within the regularly scheduled operating hours of the Verizon Regional CLEC Control Center (“RCCC”) and subject to the availability of Verizon’s work force. In the event that XxxxxxxVerizon’s work force is not available, ATI Talk Unlimited and Verizon shall mutually agree on a New Conversion Time, as defined below. ATI shall designate the Scheduled Conversion Time subject to Verizon standard provisioning intervals as stated in the Verizon CLEC Handbook, as may be revised from time to time. Within three (3) Business Days of Verizon's receipt of such valid LSR, or as otherwise required by Applicable Law, Verizon shall provide ATI the scheduled due date for conversion of the Analog 2W Loops covered by such LSR.as 3.3.1.3 ATI 3.17.1.3 Talk Unlimited shall provide dial tone at the ATI collocation Talk Unlimited Collocation site at least forty-eight (48) hours prior to the Scheduled Conversion Time. 3.3.1.4 3.17.1.4 Either Party may contact the other Party to negotiate a new Scheduled Conversion Time (the “New Conversion Time”); provided, however, that each Party shall use commercially reasonable efforts to provide four (4) business hours’ advance notice to the other Party of its request for a New Conversion Time. Any Scheduled Conversion Time or New Conversion Time may not be rescheduled more than one (1) time in a Business Day, and any two New Conversion Times for a particular Analog 2W Loop shall differ by at least eight (8) hours, unless otherwise agreed to by the Parties. 3.3.1.5 3.17.1.5 If the New Conversion Time is more than one (1) business hour from the original Scheduled Conversion Time or from the previous New Conversion Time, the Party requesting such New Conversion Time shall be subject to the following: 3.3.1.5.1 3.17.1.5.1 If Verizon requests to reschedule outside of the one (1) hour time frame above, the Analog 2W Loops Service Order Charge for the original Scheduled Conversion Time or the previous New Conversion Time shall be credited waived upon request from ATITalk Unlimited; and 3.3.1.5.2 3.17.1.5.2 If ATI Talk Unlimited requests to reschedule outside the one (1) hour time frame above, ATI Talk Unlimited shall be charged an additional Analog 2W Loops Service Order Charge for rescheduling the conversion to the New Conversion Time. 3.3.1.6 3.17.1.6 If ATI Talk Unlimited is not ready to accept service at the Scheduled Conversion Time or at a New Conversion Time, as applicable, an additional Service Order Charge shall apply. If Verizon is not available or ready to perform the conversion within thirty (30) minutes of the Scheduled Conversion Time or New Conversion Time, as applicable, Verizon and ATI Talk Unlimited will reschedule and, upon request from ATITalk Unlimited, Verizon will credit waive the Analog 2W Loop Service Order Charge for the original Scheduled Conversion Time. 3.3.1.7 3.17.1.7 The standard time interval expected from disconnection of a live Telephone Exchange Service to the connection of the Analog 2W Loops to ATI is fifteen (15) minutes per Analog 2W Loop for all orders consisting of twenty (20) Analog 2W Loops or lessthe 3.17.1. Orders involving more than twenty (20) Loops will require a negotiated interval. 3.3.1.8 8 Conversions involving LNP will be completed according to North American Numbering Council (“NANC”) standards, via the regional Number Portability Administration Center (“NPAC”). 3.3.1.9 If ATI requires Analog 2W Loop conversions outside of the regularly scheduled Verizon RCCC operating hours, such conversions shall be separately negotiated. Additional charges (e.g. overtime labor charges) may apply for desired dates and times outside of regularly scheduled RCCC operating hours.

Conversion of Live Telephone Exchange Service to Analog 2W Loops. 3.3.1 3.17.1 The following coordination procedures shall apply to “live” cutovers of Verizon Customers who are converting their Telephone Exchange Services to ATI NOS Telephone Exchange Services provisioned over Analog 2W unbundled Local Loops (“Analog 2W Loops) to be provided by Verizon to ATINOS: 3.3.1.1 3.17.1.1 Coordinated cutover charges shall apply to conversions of live Telephone Exchange Services to Analog 2W Loops. When an outside dispatch is required to perform a conversion, additional charges may apply. If ATI NOS does not request a coordinated cutover, Verizon will process ATINOS’s order as a new installation subject to applicable standard provisioning intervals. 3.3.1.2 ATI 3.17.1.2 NOS shall request Analog 2W Loops for coordinated cutover from Verizon by delivering to Verizon a valid electronic Local Service Request (“LSR”). Xxxxxxx Verizon agrees to accept from ATI NOS the date and time for the conversion designated on the LSR (“Scheduled Conversion Time”), provided that such designation is within the regularly scheduled operating hours of the Verizon Regional CLEC Control Center (“RCCC”) and subject to the availability of Verizon’s work force. In the event that XxxxxxxVerizon’s work force is not available, ATI NOS and Verizon shall mutually agree on a New Conversion Time, as defined below. ATI NOS shall designate the Scheduled Conversion Time subject to Verizon standard provisioning intervals as stated in the Verizon CLEC Handbook, as may be revised from time to time. Within three (3) Business Days of Verizon's receipt of such valid LSR, or as otherwise required by Applicable Law, Verizon shall provide ATI NOS the scheduled due date for conversion of the Analog 2W Loops covered by such LSR. 3.3.1.3 ATI 3.17.1.3 NOS shall provide dial tone at the ATI collocation NOS Collocation site at least forty-eight (48) hours prior to the Scheduled Conversion Time. 3.3.1.4 3.17.1.4 Either Party may contact the other Party to negotiate a new Scheduled Conversion Time (the “New Conversion Time”); provided, however, that each Party shall use commercially reasonable efforts to provide four (4) business hours’ advance notice to the other Party of its request for a New Conversion Time. Any Scheduled Conversion Time or New Conversion Time may not be rescheduled more than one (1) time in a Business Day, and any two New Conversion Times for a particular Analog 2W Loop Loops shall differ by at least eight (8) hours, unless otherwise agreed to by the Parties. 3.3.1.5 3.17.1.5 If the New Conversion Time is more than one (1) business hour from the original Scheduled Conversion Time or from the previous New Conversion Time, the Party requesting such New Conversion Time shall be subject to the following: 3.3.1.5.1 3.17.1.5.1 If Verizon requests to reschedule outside of the one (1) hour time frame above, the Analog 2W Loops Service Order Charge for the original Scheduled Conversion Time or the previous New Conversion Time shall be credited waived upon request from ATINOS; and 3.3.1.5.2 3.17.1.5.2 If ATI NOS requests to reschedule outside the one one (1) hour time frame above, ATI NOS shall be charged an additional Analog 2W Loops Service Order Charge for rescheduling the conversion to the New Conversion Time. 3.3.1.6 3.17.1.6 If ATI NOS is not ready to accept service at the Scheduled Conversion Time or at a New Conversion Time, as applicable, an additional Service Order Charge shall apply. If Verizon is not available or ready to perform the conversion within thirty (30) minutes of the Scheduled Conversion Time or New Conversion Time, as applicable, Verizon and ATI NOS will reschedule and, upon request from ATINOS, Verizon will credit waive the Analog 2W Loop Service Order Charge for the original Scheduled Conversion Time. 3.3.1.7 3.17.1.7 The standard time interval expected from disconnection of a live Telephone Exchange Service to the connection of the Analog 2W Loops to ATI NOS is fifteen (15) minutes per Analog 2W Loop for all orders consisting of twenty (20) Analog 2W Loops or less. Orders involving more than twenty (20) Loops will require a negotiated interval. 3.3.1.8 3.17.1.8 Conversions involving LNP will be completed according to North American Numbering Council (“NANC”) standards, via the regional Number Portability Administration Center (“NPAC”). 3.3.1.9 3.17.1.9 If ATI NOS requires Analog 2W Loop conversions outside of the regularly scheduled Verizon RCCC operating hours, such conversions shall be separately negotiated. Additional charges (e.g. overtime labor charges) may apply for desired dates and times outside of regularly scheduled RCCC operating hours.

Conversion of Live Telephone Exchange Service to Analog 2W Loops. 3.3.1 3.17.1 The following coordination procedures shall apply to “live” cutovers of Verizon Customers who are converting their Telephone Exchange Services to ATI FRCI Telephone Exchange Services provisioned over Analog 2W unbundled Local Loops (“Analog 2W Loops) to be provided by Verizon to ATIFRCI: 3.3.1.1 3.17.1.1 Coordinated cutover charges shall apply to conversions of live Telephone Exchange Services to Analog 2W Loops. When an outside dispatch is required to perform a conversion, additional charges may apply. If ATI FRCI does not request a coordinated cutover, Verizon will process ATIFRCI’s order as a new installation subject to applicable standard provisioning intervals. 3.3.1.2 ATI 3.17.1.2 FRCI shall request Analog 2W Loops for coordinated cutover from Verizon by delivering to Verizon a valid electronic Local Service Request (“LSR”). Xxxxxxx Verizon agrees to accept from ATI FRCI the date and time for the conversion designated on the LSR (“Scheduled Conversion Time”), provided that such designation is within the regularly scheduled operating hours of the Verizon Regional CLEC CLE C Control Center (“RCCC”) and subject to the availability of Verizon’s work force. In the event that XxxxxxxVerizon’s work force is not available, ATI FRCI and Verizon shall mutually agree on a New Conversion Time, as defined below. ATI FRCI shall designate the Scheduled Conversion Time subject to Verizon standard provisioning intervals as stated in the Verizon CLEC Handbook, as may be revised from time to time. Within three (3) Business Days of Verizon's receipt of such valid LSR, or as otherwise required by Applicable Law, Verizon shall provide ATI FRCI the scheduled due date for conversion of the Analog 2W Loops covered by such LSR. 3.3.1.3 ATI 3.17.1.3 FRCI shall provide dial tone at the ATI collocation FRCI Collocation site at least forty-eight (48) hours prior to the Scheduled Conversion Time. 3.3.1.4 3.17.1.4 Either Party may contact the other Party to negotiate a new Scheduled Conversion Time (the “New Conversion Time”); provided, however, that each Party shall use commercially reasonable efforts to provide four (4) business hours’ advance notice to the other Party of its request for a New Conversion Time. Any Scheduled Conversion Time or New Conversion Time may not be rescheduled more than one (1) time in a Business Day, and any two New Conversion Times for a particular Analog 2W Loop Loops shall differ by at least eight (8) hours, unless otherwise agreed to by the Parties. 3.3.1.5 3.17.1.5 If the New Conversion Time is more than one (1) business hour from the original Scheduled Conversion Time or from the previous New Conversion Time, the Party requesting such New Conversion Time shall be subject to the following: 3.3.1.5.1 3.17.1.5.1 If Verizon requests to reschedule outside of the one (1) hour time frame above, the Analog 2W Loops Service Order Charge for the original Scheduled Conversion Time or the previous New Conversion Time shall be credited waived upon request from ATIFRCI; and 3.3.1.5.2 3.17.1.5.2 If ATI FRCI requests to reschedule outside the one one (1) hour time frame above, ATI FRCI shall be charged an additional Analog 2W Loops Service Order Charge for rescheduling the conversion to the New Conversion Time. 3.3.1.6 3.17.1.6 If ATI FRCI is not ready to accept service at the Scheduled Conversion Time or at a New Conversion Time, as applicable, an additional Service Order Charge shall apply. If Verizon is not available or ready to perform the conversion within thirty (30) minutes of the Scheduled Conversion Time or New Conversion Time, as applicable, Verizon and ATI FRCI will reschedule and, upon request from ATIFRCI, Verizon will credit waive the Analog 2W Loop Service Order Charge for the original Scheduled Conversion Time. 3.3.1.7 3.17.1.7 The standard time interval expected from disconnection of a live Telephone Exchange Service to the connection of the Analog 2W Loops to ATI FRCI is fifteen (15) minutes per Analog 2W Loop for all orders consisting of twenty (20) Analog 2W Loops or less. Orders involving more than twenty (20) Loops will require a negotiated interval. 3.3.1.8 3.17.1.8 Conversions involving LNP will be completed according to North American Numbering Council (“NANC”) standards, via the regional Number Portability Administration Center (“NPAC”). 3.3.1.9 3.17.1.9 If ATI FRCI requires Analog 2W Loop conversions outside of the regularly scheduled Verizon RCCC operating hours, such conversions shall be separately negotiated. Additional charges (e.g. overtime labor charges) may apply for desired dates and times outside of regularly scheduled RCCC operating hours.

Conversion of Live Telephone Exchange Service to Analog 2W Loops. 3.3.1 3.17.1 The following coordination procedures shall apply to “live” cutovers of Verizon Customers who are converting their Telephone Exchange Services to ATI Delta Phones Telephone Exchange Services provisioned over Analog 2W unbundled Local Loops (“Analog 2W Loops) to be provided by Verizon to ATIDelta Phones: 3.3.1.1 3.17.1.1 Coordinated cutover charges shall apply to conversions of live Telephone Exchange Services to Analog 2W Loops. When an outside dispatch is required to perform a conversion, additional charges may apply. If ATI Delta Phones does not request a coordinated cutover, Verizon will process ATIDelta Phones’s order as a new installation subject to applicable standard provisioning intervals. 3.3.1.2 ATI 3.17.1.2 Delta Phones shall request Analog 2W Loops for coordinated cutover from Verizon by delivering to Verizon a valid electronic Local Service Request (“LSR”). Xxxxxxx Verizon agrees to accept from ATI Delta Phones the date and time for the conversion designated on the LSR (“Scheduled Conversion Time”), provided that such designation is within the regularly scheduled operating hours of the Verizon Regional CLEC Control Center (“RCCC”) and subject to the availability of Verizon’s work force. In the event that XxxxxxxVerizon’s work force is not available, ATI Delta Phones and Verizon shall mutually agree on a New Conversion Time, as defined below. ATI Delta Phones shall designate the Scheduled Conversion Time subject to Verizon standard provisioning intervals as stated in the Verizon CLEC Handbook, as may be revised from time to time. Within three (3) Business Days of Verizon's receipt of such valid LSR, or as otherwise required by Applicable Law, Verizon shall provide ATI Delta Phones the scheduled due date for conversion of the Analog 2W Loops covered by such LSR. 3.3.1.3 ATI 3.17.1.3 Delta Phones shall provide dial tone at the ATI collocation Delta Phones Collocation site at least forty-eight (48) hours prior to the Scheduled Conversion Time. 3.3.1.4 3.17.1.4 Either Party may contact the other Party to negotiate a new Scheduled Conversion Time (the “New Conversion Time”); provided, however, that each Party shall use commercially reasonable efforts to provide four (4) business hours’ advance notice to the other Party of its request for a New Conversion Time. Any Scheduled Conversion Time or New Conversion Time may not be rescheduled more than one (1) time in a Business Daybusiness day, and any two New Conversion Times for a particular Analog 2W Loop shall differ by at least eight (8) hours, unless otherwise agreed to by the Parties. 3.3.1.5 3.17.1.5 If the New Conversion Time is more than one (1) business hour from the original Scheduled Conversion Time or from the previous New Conversion Time, the Party requesting such New Conversion Time shall be subject to the following: 3.3.1.5.1 3.17.1.5.1 If Verizon requests to reschedule outside of the one (1) hour time frame above, the Analog 2W Loops Service Order Charge for the original Scheduled Conversion Time or the previous New Conversion Time shall be credited waived upon request from ATIDelta Phones; and 3.3.1.5.2 3.17.1.5.2 If ATI Delta Phones requests to reschedule outside the one (1) hour time frame above, ATI Delta Phones shall be charged an additional Analog 2W Loops Service Order Charge for rescheduling the conversion to the New Conversion Time. 3.3.1.6 3.17.1.6 If ATI Delta Phones is not ready to accept service at the Scheduled Conversion Time or at a New Conversion Time, as applicable, an additional Service Order Charge shall apply. If Verizon is not available or ready to perform the conversion within thirty (30) minutes of the Scheduled Conversion Time or New Conversion Time, as applicable, Verizon and ATI Delta Phones will reschedule and, upon request from ATIDelta Phones, Verizon will credit waive the Analog 2W Loop Service Order Charge for the original Scheduled Conversion Time. 3.3.1.7 3.17.1.7 The standard time interval expected from disconnection of a live Telephone Exchange Service to the connection of the Analog 2W Loops to ATI Delta Phones is fifteen (15) minutes per Analog 2W Loop for all orders consisting of twenty (20) Analog 2W Loops or less. Orders involving more than twenty (20) Loops will require a negotiated interval. 3.3.1.8 3.17.1.8 Conversions involving LNP will be completed according to North American Numbering Council (“NANC”) standards, via the regional Number Portability Administration Center (“NPAC”). 3.3.1.9 3.17.1.9 If ATI Delta Phones requires Analog 2W Loop conversions outside of the regularly scheduled Verizon RCCC operating hours, such conversions shall be separately negotiated. Additional charges (e.g. overtime labor charges) may apply for desired dates and times outside of regularly scheduled RCCC operating hours.

Conversion of Live Telephone Exchange Service to Analog 2W Loops. 3.3.1 3.17.1 The following coordination procedures shall apply to “live” cutovers of Verizon Customers who are converting their Telephone Exchange Services to ATI Budget Phone Telephone Exchange Services provisioned over Analog 2W unbundled Local Loops (“Analog 2W Loops) to be provided by Verizon to ATIBudget Phone: 3.3.1.1 3.17.1.1 Coordinated cutover charges shall apply to conversions of live Telephone Exchange Services to Analog 2W Loops. When an outside dispatch is required to perform a conversion, additional charges may apply. If ATI Budget Phone does not request a coordinated cutover, Verizon will process ATIBudget Phone’s order as a new installation subject to applicable standard provisioning intervals. 3.3.1.2 ATI 3.17.1.2 Budget Phone shall request Analog 2W Loops for coordinated cutover from Verizon by delivering to Verizon a valid electronic Local Service Request (“LSR”). Xxxxxxx Verizon agrees to accept from ATI Budget Phone the date and time for the conversion designated on the LSR (“Scheduled Conversion Time”), provided that such designation is within the regularly scheduled operating hours of the Verizon Regional CLEC Control Center (“RCCC”) and subject to the availability of Verizon’s work force. In the event that XxxxxxxVerizon’s work force is not available, ATI Budget Phone and Verizon shall mutually agree on a New Conversion Time, as defined below. ATI Budget Phone shall designate the Scheduled Conversion Time subject to Verizon standard provisioning intervals as stated in the Verizon CLEC Handbook, as may be revised from time to time. Within three (3) Business Days of Verizon's receipt of such valid LSR, or as otherwise required by Applicable Law, Verizon shall provide ATI Budget Phone the scheduled due date for conversion of the Analog 2W Loops covered by such LSR. 3.3.1.3 ATI 3.17.1.3 Budget Phone shall provide dial tone at the ATI collocation Budget Phone Collocation site at least forty-eight (48) hours prior to the Scheduled Conversion Time. 3.3.1.4 3.17.1.4 Either Party may contact the other Party to negotiate a new Scheduled Conversion Time (the “New Conversion Time”); provided, however, that each Party shall use commercially reasonable efforts to provide four (4) business hours’ advance notice to the other Party of its request for a New Conversion Time. Any Scheduled Conversion Time or New Conversion Time may not be rescheduled more than one (1) time in a Business Day, and any two New Conversion Times for a particular Analog 2W Loop shall differ by at least eight (8) hours, unless otherwise agreed to by the Parties. 3.3.1.5 3.17.1.5 If the New Conversion Time is more than one (1) business hour from the original Scheduled Conversion Time or from the previous New Conversion Time, the Party requesting such New Conversion Time shall be subject to the following: 3.3.1.5.1 3.17.1.5.1 If Verizon requests to reschedule outside of the one (1) hour time frame above, the Analog 2W Loops Service Order Charge for the original Scheduled Conversion Time or the previous New Conversion Time shall be credited waived upon request from ATIBudget Phone; and 3.3.1.5.2 3.17.1.5.2 If ATI Budget Phone requests to reschedule outside the one (1) hour time frame above, ATI Budget Phone shall be charged an additional Analog 2W Loops Service Order Charge for rescheduling the conversion to the New Conversion Time. 3.3.1.6 3.17.1.6 If ATI Budget Phone is not ready to accept service at the Scheduled Conversion Time or at a New Conversion Time, as applicable, an additional Service Order Charge shall apply. If Verizon is not available or ready to perform the conversion within thirty (30) minutes of the Scheduled Conversion Time or New Conversion Time, as applicable, Verizon and ATI Budget Phone will reschedule and, upon request from ATIBudget Phone, Verizon will credit waive the Analog 2W Loop Service Order Charge for the original Scheduled Conversion Time. 3.3.1.7 3.17.1.7 The standard time interval expected from disconnection of a live Telephone Exchange Service to the connection of the Analog 2W Loops to ATI Budget Phone is fifteen (15) minutes per Analog 2W Loop for all orders consisting of twenty (20) Analog 2W Loops or less. Orders involving more than twenty (20) Loops will require a negotiated interval. 3.3.1.8 3.17.1.8 Conversions involving LNP will be completed according to North American Numbering Council (“NANC”) standards, via the regional Number Portability Administration Center (“NPAC”). 3.3.1.9 3.17.1.9 If ATI Budget Phone requires Analog 2W Loop conversions outside of the regularly scheduled Verizon RCCC operating hours, such conversions shall be separately negotiated. Additional charges (e.g. overtime labor charges) may apply for desired dates and times outside of regularly scheduled RCCC operating hours.

Conversion of Live Telephone Exchange Service to Analog 2W Loops. 3.3.1 The following coordination procedures shall apply to “live” cutovers of Verizon Customers who are converting their Telephone Exchange Services to ATI ECI Telephone Exchange Services provisioned over Analog 2W unbundled Local Loops (“Analog 2W Loops) to be provided by Verizon to ATIECI: 3.3.1.1 Coordinated cutover charges shall apply to conversions of live Telephone Exchange Services to Analog 2W Loops. When an outside dispatch is required to perform a conversion, additional charges may apply. If ATI ECI does not request a coordinated cutover, Verizon will process ATIECI’s order as a new installation subject to applicable standard provisioning intervals. 3.3.1.2 ATI ECI shall request Analog 2W Loops for coordinated cutover from Verizon by delivering to Verizon a valid electronic Local Service Request (“LSR”). Xxxxxxx agrees to accept from ATI ECI the date and time for the conversion designated on the LSR (“Scheduled Conversion Time”), provided that such designation is within the regularly scheduled operating hours of the Verizon Regional CLEC Control Center (“RCCC”) and subject to the availability of Verizon’s work force. In the event that Xxxxxxx’s work force is not available, ATI ECI and Verizon shall mutually agree on a New Conversion Time, as defined below. ATI ECI shall designate the Scheduled Conversion Time subject to Verizon standard provisioning intervals as stated in the Verizon CLEC Handbook, as may be revised from time to time. Within three (3) Business Days of Verizon's receipt of such valid LSR, or as otherwise required by Applicable Law, Verizon shall provide ATI ECI the scheduled due date for conversion of the Analog 2W Loops covered by such LSR. 3.3.1.3 ATI ECI shall provide dial tone at the ATI ECI collocation site at least forty-eight (48) hours prior to the Scheduled Conversion Time. 3.3.1.4 Either Party may contact the other Party to negotiate a new Scheduled Conversion Time (the “New Conversion Time”); provided, however, that each Party shall use commercially reasonable efforts to provide four (4) business hours’ advance notice to the other Party of its request for a New Conversion Time. Any Scheduled Conversion Time or New Conversion Time may not be rescheduled more than one (1) time in a Business Day, and any two New Conversion Times for a particular Analog 2W Loop shall differ by at least eight (8) hours, unless otherwise agreed to by the Parties. 3.3.1.5 If the New Conversion Time is more than one (1) business hour from the original Scheduled Conversion Time or from the previous New Conversion Time, the Party requesting such New Conversion Time shall be subject to the following: 3.3.1.5.1 If Verizon requests to reschedule outside of the one (1) hour time frame above, the Analog 2W Loops Service Order Charge for the original Scheduled Conversion Time or the previous New Conversion Time shall be credited upon request from ATIECI; and 3.3.1.5.2 If ATI ECI requests to reschedule outside the one (1) hour time frame above, ATI ECI shall be charged an additional Analog 2W Loops Service Order Charge for rescheduling the conversion to the New Conversion Time. 3.3.1.6 If ATI ECI is not ready to accept service at the Scheduled Conversion Time or at a New Conversion Time, as applicable, an additional Service Order Charge shall apply. If Verizon is not available or ready to perform the conversion within thirty (30) minutes of the Scheduled Conversion Time or New Conversion Time, as applicable, Verizon and ATI ECI will reschedule and, upon request from ATIECI, Verizon will credit the Analog 2W Loop Service Order Charge for the original Scheduled Conversion Time. 3.3.1.7 The standard time interval expected from disconnection of a live Telephone Exchange Service to the connection of the Analog 2W Loops to ATI ECI is fifteen (15) minutes per Analog 2W Loop for all orders consisting of twenty (20) Analog 2W Loops or less. Orders involving more than twenty (20) Loops will require a negotiated interval. 3.3.1.8 Conversions involving LNP will be completed according to North American Numbering Council (NANC) standards, via the regional Number Portability Administration Center (NPAC). 3.3.1.9 If ATI ECI requires Analog 2W Loop conversions outside of the regularly scheduled Verizon RCCC operating hours, such conversions shall be separately negotiated. Additional charges (e.g. overtime labor charges) may apply for desired dates and times outside of regularly scheduled RCCC operating hours.

Conversion of Live Telephone Exchange Service to Analog 2W Loops. 3.3.1 The following coordination procedures shall apply to “live” cutovers of Verizon Customers who are converting their Telephone Exchange Services to ATI Ymax Telephone Exchange Services provisioned over Analog 2W unbundled Local Loops (“Analog 2W Loops) to be provided by Verizon to ATIYmax: 3.3.1.1 Coordinated cutover charges shall apply to conversions of live Telephone Exchange Services to Analog 2W Loops. When an outside dispatch is required to perform a conversion, additional charges may apply. If ATI Ymax does not request a coordinated cutover, Verizon will process ATIYmax’s order as a new installation subject to applicable standard provisioning intervals. 3.3.1.2 ATI Ymax shall request Analog 2W Loops for coordinated cutover from Verizon by delivering to Verizon a valid electronic Local Service Request (“LSR”). Xxxxxxx agrees to accept from ATI Ymax the date and time for the conversion designated on the LSR (“Scheduled Conversion Time”), provided that such designation is within the regularly scheduled operating hours of the Verizon Regional CLEC Control Center (“RCCC”) and subject to the availability of Verizon’s work force. In the event that Xxxxxxx’s work force is not available, ATI Ymax and Verizon shall mutually agree on a New Conversion Time, as defined below. ATI Ymax shall designate the Scheduled Conversion Time subject to Verizon standard provisioning intervals as stated in the Verizon CLEC Handbook, as may be revised from time to time. Within three (3) Business Days of Verizon's receipt of such valid LSR, or as otherwise required by Applicable Law, Verizon shall provide ATI Ymax the scheduled due date for conversion of the Analog 2W Loops covered by such LSR. 3.3.1.3 ATI Ymax shall provide dial tone at the ATI Ymax collocation site at least forty-eight (48) hours prior to the Scheduled Conversion Time. 3.3.1.4 Either Party may contact the other Party to negotiate a new Scheduled Conversion Time (the “New Conversion Time”); provided, however, that each Party shall use commercially reasonable efforts to provide four (4) business hours’ advance notice to the other Party of its request for a New Conversion Time. Any Scheduled Conversion Time or New Conversion Time may not be rescheduled more than one (1) time in a Business Day, and any two New Conversion Times for a particular Analog 2W Loop shall differ by at least eight (8) hours, unless otherwise agreed to by the Parties. 3.3.1.5 If the New Conversion Time is more than one (1) business hour from the original Scheduled Conversion Time or from the previous New Conversion Time, the Party requesting such New Conversion Time shall be subject to the following: 3.3.1.5.1 If Verizon requests to reschedule outside of the one (1) hour time frame above, the Analog 2W Loops Service Order Charge for the original Scheduled Conversion Time or the previous New Conversion Time shall be credited upon request from ATIYmax; and 3.3.1.5.2 If ATI Ymax requests to reschedule outside the one one (1) hour time frame above, ATI Ymax shall be charged an additional Analog 2W Loops Service Order Charge for rescheduling the conversion to the New Conversion Time. 3.3.1.6 If ATI Ymax is not ready to accept service at the Scheduled Conversion Time or at a New Conversion Time, as applicable, an additional Service Order Charge shall apply. If Verizon is not available or ready to perform the conversion within thirty (30) minutes of the Scheduled Conversion Time or New Conversion Time, as applicable, Verizon and ATI Ymax will reschedule and, upon request from ATIYmax, Verizon will credit the Analog 2W Loop Service Order Charge for the original Scheduled Conversion Time. 3.3.1.7 The standard time interval expected from disconnection of a live Telephone Exchange Service to the connection of the Analog 2W Loops to ATI Ymax is fifteen (15) minutes per Analog 2W Loop for all orders consisting of twenty (20) Analog 2W Loops or less. Orders involving more than twenty (20) Loops will require a negotiated interval. 3.3.1.8 Conversions involving LNP will be completed according to North American Numbering Council (NANC) standards, via the regional Number Portability Administration Center (NPAC). 3.3.1.9 If ATI Ymax requires Analog 2W Loop conversions outside of the regularly scheduled Verizon RCCC operating hours, such conversions shall be separately negotiated. Additional charges (e.g. overtime labor charges) may apply for desired dates and times outside of regularly scheduled RCCC operating hours.

Conversion of Live Telephone Exchange Service to Analog 2W Loops. 3.3.1 3.17.1 The following coordination procedures shall apply to “live” cutovers of Verizon Customers who are converting their Telephone Exchange Services to ATI Phone-Link Telephone Exchange Services provisioned over Analog 2W unbundled Local Loops (“Analog 2W Loops) to be provided by Verizon to ATIPhone-Link: 3.3.1.1 3.17.1.1 Coordinated cutover charges shall apply to conversions of live Telephone Exchange Services to Analog 2W Loops. When an outside dispatch is required to perform a conversion, additional charges may apply. If ATI Phone-Link does not request a coordinated cutover, Verizon will process ATIPhone-Link’s order as a new installation subject to applicable standard provisioning intervals. 3.3.1.2 ATI 3.17.1.2 Phone-Link shall request Analog 2W Loops for coordinated cutover from Verizon by delivering to Verizon a valid electronic Local Service Request (“LSR”). Xxxxxxx Verizon agrees to accept from ATI Phone-Link the date and time for the conversion designated on the LSR (“Scheduled Conversion Time”), provided that such designation is within the regularly scheduled operating hours of the Verizon Regional CLEC Control Center (“RCCC”) and subject to the availability of Verizon’s work force. In the event that XxxxxxxVerizon’s work force is not available, ATI Phone-Link and Verizon shall mutually agree on a New Conversion Time, as defined below. ATI Phone-Link shall designate the Scheduled Conversion Time subject to Verizon standard provisioning intervals as stated in the Verizon CLEC Handbook, as may be revised from time to time. Within three (3) Business Days of Verizon's receipt of such valid LSR, or as otherwise required by Applicable Law, Verizon shall provide ATI the scheduled due date for conversion of the Analog 2W Loops covered by such LSR. 3.3.1.3 ATI shall provide dial tone at the ATI collocation site at least forty-eight (48) hours prior to the Scheduled Conversion Time. 3.3.1.4 Either Party may contact the other Party to negotiate a new Scheduled Conversion Time (the “New Conversion Time”); provided, however, that each Party shall use commercially reasonable efforts to provide four (4) business hours’ advance notice to the other Party of its request for a New Conversion Time. Any Scheduled Conversion Time or New Conversion Time may not be rescheduled more than one (1) time in a Business Day, and any two New Conversion Times for a particular Analog 2W Loop shall differ by at least eight (8) hours, unless otherwise agreed to by the Parties. 3.3.1.5 If the New Conversion Time is more than one (1) business hour from the original Scheduled Conversion Time or from the previous New Conversion Time, the Party requesting such New Conversion Time shall be subject to the following: 3.3.1.5.1 If Verizon requests to reschedule outside of the one (1) hour time frame above, the Analog 2W Loops Service Order Charge for the original Scheduled Conversion Time or the previous New Conversion Time shall be credited upon request from ATI; and 3.3.1.5.2 If ATI requests to reschedule outside the one (1) hour time frame above, ATI shall be charged an additional Analog 2W Loops Service Order Charge for rescheduling the conversion to the New Conversion Time. 3.3.1.6 If ATI is not ready to accept service at the Scheduled Conversion Time or at a New Conversion Time, as applicable, an additional Service Order Charge shall apply. If Verizon is not available or ready to perform the conversion within thirty (30) minutes of the Scheduled Conversion Time or New Conversion Time, as applicable, Verizon and ATI will reschedule and, upon request from ATI, Verizon will credit the Analog 2W Loop Service Order Charge for the original Scheduled Conversion Time. 3.3.1.7 The standard time interval expected from disconnection of a live Telephone Exchange Service to the connection of the Analog 2W Loops to ATI is fifteen (15) minutes per Analog 2W Loop for all orders consisting of twenty (20) Analog 2W Loops or less. Orders involving more than twenty (20) Loops will require a negotiated interval. 3.3.1.8 Conversions involving LNP will be completed according to North American Numbering Council (NANC) standards, via the regional Number Portability Administration Center (NPAC). 3.3.1.9 If ATI requires Analog 2W Loop conversions outside of the regularly scheduled Verizon RCCC operating hours, such conversions shall be separately negotiated. Additional charges (e.g. overtime labor charges) may apply for desired dates and times outside of regularly scheduled RCCC operating hours.three

Conversion of Live Telephone Exchange Service to Analog 2W Loops. 3.3.1 The following coordination procedures shall apply to “live” cutovers of Verizon Customers who are converting their Telephone Exchange Services to ATI CCA Telephone Exchange Services provisioned over Analog 2W unbundled Local Loops (“Analog 2W Loops) to be provided by Verizon to ATICCA: 3.3.1.1 Coordinated cutover charges shall apply to conversions of live Telephone Exchange Services to Analog 2W Loops. When an outside dispatch is required to perform a conversion, additional charges may apply. If ATI CCA does not request a coordinated cutover, Verizon will process ATICCA’s order as a new installation subject to applicable standard provisioning intervals. 3.3.1.2 ATI CCA shall request Analog 2W Loops for coordinated cutover from Verizon by delivering to Verizon a valid electronic Local Service Request (“LSR”). Xxxxxxx agrees to accept from ATI CCA the date and time for the conversion designated on the LSR (“Scheduled Conversion Time”), provided that such designation is within the regularly scheduled operating hours of the Verizon Regional CLEC Control Center (“RCCC”) and subject to the availability of Verizon’s work force. In the event that Xxxxxxx’s work force is not available, ATI CCA and Verizon shall mutually agree on a New Conversion Time, as defined below. ATI CCA shall designate the Scheduled Conversion Time subject to Verizon standard provisioning intervals as stated in the Verizon CLEC Handbook, as may be revised from time to time. Within three (3) Business Days of Verizon's receipt of such valid LSR, or as otherwise required by Applicable Law, Verizon shall provide ATI CCA the scheduled due date for conversion of the Analog 2W Loops covered by such LSR. 3.3.1.3 ATI CCA shall provide dial tone at the ATI CCA collocation site at least forty-eight (48) hours prior to the Scheduled Conversion Time. 3.3.1.4 Either Party may contact the other Party to negotiate a new Scheduled Conversion Time (the “New Conversion Time”); provided, however, that each Party shall use commercially reasonable efforts to provide four (4) business hours’ advance notice to the other Party of its request for a New Conversion Time. Any Scheduled Conversion Time or New Conversion Time may not be rescheduled more than one (1) time in a Business Day, and any two New Conversion Times for a particular Analog 2W Loop shall differ by at least eight (8) hours, unless otherwise agreed to by the Parties. 3.3.1.5 If the New Conversion Time is more than one (1) business hour from the original Scheduled Conversion Time or from the previous New Conversion Time, the Party requesting such New Conversion Time shall be subject to the following: 3.3.1.5.1 If Verizon requests to reschedule outside of the one (1) hour time frame above, the Analog 2W Loops Service Order Charge for the original Scheduled Conversion Time or the previous New Conversion Time shall be credited upon request from ATICCA; and 3.3.1.5.2 If ATI CCA requests to reschedule outside the one one (1) hour time frame above, ATI CCA shall be charged an additional Analog 2W Loops Service Order Charge for rescheduling the conversion to the New Conversion Time. 3.3.1.6 If ATI CCA is not ready to accept service at the Scheduled Conversion Time or at a New Conversion Time, as applicable, an additional Service Order Charge shall apply. If Verizon is not available or ready to perform the conversion within thirty (30) minutes of the Scheduled Conversion Time or New Conversion Time, as applicable, Verizon and ATI CCA will reschedule and, upon request from ATICCA, Verizon will credit the Analog 2W Loop Service Order Charge for the original Scheduled Conversion Time. 3.3.1.7 The standard time interval expected from disconnection of a live Telephone Exchange Service to the connection of the Analog 2W Loops to ATI CCA is fifteen (15) minutes per Analog 2W Loop for all orders consisting of twenty (20) Analog 2W Loops or less. Orders involving more than twenty (20) Loops will require a negotiated interval. 3.3.1.8 Conversions involving LNP will be completed according to North American Numbering Council (NANC) standards, via the regional Number Portability Administration Center (NPAC). 3.3.1.9 If ATI CCA requires Analog 2W Loop conversions outside of the regularly scheduled Verizon RCCC operating hours, such conversions shall be separately negotiated. Additional charges (e.g. overtime labor charges) may apply for desired dates and times outside of regularly scheduled RCCC operating hours.

Conversion of Live Telephone Exchange Service to Analog 2W Loops. 3.3.1 3.17.1 The following coordination procedures shall apply to “live” cutovers of Verizon Customers who are converting their Telephone Exchange Services to ATI BitWise Telephone Exchange Services provisioned over Analog 2W unbundled Local Loops (“Analog 2W Loops) to be provided by Verizon to ATIBitWise: 3.3.1.1 3.17.1.1 Coordinated cutover charges shall apply to conversions of live Telephone Exchange Services to Analog 2W Loops. When an outside dispatch is required to perform a conversion, additional charges may apply. If ATI BitWise does not request a coordinated cutover, Verizon will process ATIBitWise’s order as a new installation subject to applicable standard provisioning intervals. 3.3.1.2 ATI 3.17.1.2 BitWise shall request Analog 2W Loops for coordinated cutover from Verizon by delivering to Verizon a valid electronic Local Service Request (“LSR”). Xxxxxxx Verizon agrees to accept from ATI BitWise the date and time for the conversion designated on the LSR (“Scheduled Conversion Time”), provided that such designation is within the regularly scheduled operating hours of the Verizon Regional CLEC Control Center (“RCCC”) and subject to the availability of Verizon’s work force. In the event that XxxxxxxVerizon’s work force is not available, ATI BitWise and Verizon shall mutually agree on a New Conversion Time, as defined below. ATI BitWise shall designate the Scheduled Conversion Time subject to Verizon standard provisioning intervals as stated in the Verizon CLEC Handbook, as may be revised from time to time. Within three (3) Business Days of Verizon's receipt of such valid LSR, or as otherwise required by Applicable Law, Verizon shall provide ATI BitWise the scheduled due date for conversion of the Analog 2W Loops covered by such LSR. 3.3.1.3 ATI 3.17.1.3 BitWise shall provide dial tone at the ATI collocation BitWise Collocation site at least forty-eight (48) hours prior to the Scheduled Conversion Time. 3.3.1.4 3.17.1.4 Either Party may contact the other Party to negotiate a new Scheduled Conversion Time (the “New Conversion Time”); provided, however, that each Party shall use commercially reasonable efforts to provide four (4) business hours’ advance notice to the other Party of its request for a New Conversion Time. Any Scheduled Conversion Time or New Conversion Time may not be rescheduled more than one (1) time in a Business Day, and any two New Conversion Times for a particular Analog 2W Loop Loops shall differ by at least eight (8) hours, unless otherwise agreed to by the Parties. 3.3.1.5 3.17.1.5 If the New Conversion Time is more than one (1) business hour from the original Scheduled Conversion Time or from the previous New Conversion Time, the Party requesting such New Conversion Time shall be subject to the following: 3.3.1.5.1 3.17.1.5.1 If Verizon requests to reschedule outside of the one (1) hour time frame above, the Analog 2W Loops Service Order Charge for the original Scheduled Conversion Time or the previous New Conversion Time shall be credited waived upon request from ATIBitWise; and 3.3.1.5.2 3.17.1.5.2 If ATI BitWise requests to reschedule outside the one (1) hour time frame above, ATI BitWise shall be charged an additional Analog 2W Loops Service Order Charge for rescheduling the conversion to the New Conversion Time. 3.3.1.6 3.17.1.6 If ATI BitWise is not ready to accept service at the Scheduled Conversion Time or at a New Conversion Time, as applicable, an additional Service Order Charge shall apply. If Verizon is not available or ready to perform the conversion within thirty (30) minutes of the Scheduled Conversion Time or New Conversion Time, as applicable, Verizon and ATI BitWise will reschedule and, upon request from ATIBitWise, Verizon will credit waive the Analog 2W Loop Service Order Charge for the original Scheduled Conversion Time. 3.3.1.7 3.17.1.7 The standard time interval expected from disconnection of a live Telephone Exchange Service to the connection of the Analog 2W Loops to ATI BitWise is fifteen (15) minutes per Analog 2W Loop for all orders consisting of twenty (20) Analog 2W Loops or less. Orders involving more than twenty (20) Loops will require a negotiated interval. 3.3.1.8 3.17.1.8 Conversions involving LNP will be completed according to North American Numbering Council (“NANC”) standards, via the regional Number Portability Administration Center (“NPAC”). 3.3.1.9 3.17.1.9 If ATI BitWise requires Analog 2W Loop conversions outside of the regularly scheduled Verizon RCCC operating hours, such conversions shall be separately negotiated. Additional charges (e.g. overtime labor charges) may apply for desired dates and times outside of regularly scheduled RCCC operating hours.

Conversion of Live Telephone Exchange Service to Analog 2W Loops. 3.3.1 3.17.1 The following coordination procedures shall apply to “live” cutovers of Verizon Customers who are converting their Telephone Exchange Services to ATI Talk Unlimited Telephone Exchange Services provisioned over Analog 2W unbundled Local Loops (“Analog 2W Loops) to be provided by Verizon to ATITalk Unlimited: 3.3.1.1 3.17.1.1 Coordinated cutover charges shall apply to conversions of live Telephone Exchange Services to Analog 2W Loops. When an outside dispatch is required to perform a conversion, additional charges may apply. If ATI Talk Unlimited does not request a coordinated cutover, Verizon will process ATITalk Unlimited’s order as a new installation subject to applicable standard provisioning intervals. 3.3.1.2 ATI 3.17.1.2 Talk Unlimited shall request Analog 2W Loops for coordinated cutover from Verizon by delivering to Verizon a valid electronic Local Service Request (“LSR”). Xxxxxxx agrees to accept from ATI Talk Unlimited the date and time for the conversion designated on the LSR (“Scheduled Conversion Time”), provided that such designation is within the regularly scheduled operating hours of the Verizon Regional CLEC Control Center (“RCCC”) and subject to the availability of Verizon’s work force. In the event that Xxxxxxx’s work force is not available, ATI Talk Unlimited and Verizon shall mutually agree on a New Conversion Time, as defined below. ATI Talk Unlimited shall designate the Scheduled Conversion Time subject to Verizon standard provisioning intervals as stated in the Verizon CLEC Handbook, as may be revised from time to time. Within three (3) Business Days of Verizon's receipt of such valid LSR, or as otherwise required by Applicable Law, Verizon shall provide ATI Talk Unlimited the scheduled due date for conversion of the Analog 2W Loops covered by such LSR. 3.3.1.3 ATI 3.17.1.3 Talk Unlimited shall provide dial tone at the ATI collocation Talk Unlimited Collocation site at least forty-eight (48) hours prior to the Scheduled Conversion Time. 3.3.1.4 3.17.1.4 Either Party may contact the other Party to negotiate a new Scheduled Conversion Time (the “New Conversion Time”); provided, however, that each Party shall use commercially reasonable efforts to provide four (4) business hours’ advance notice to the other Party of its request for a New Conversion Time. Any Scheduled Conversion Time or New Conversion Time may not be rescheduled more than one (1) time in a Business Day, and any two New Conversion Times for a particular Analog 2W Loop shall differ by at least eight (8) hours, unless otherwise agreed to by the Parties. 3.3.1.5 3.17.1.5 If the New Conversion Time is more than one (1) business hour from the original Scheduled Conversion Time or from the previous New Conversion Time, the Party requesting such New Conversion Time shall be subject to the following: 3.3.1.5.1 3.17.1.5.1 If Verizon requests to reschedule outside of the one (1) hour time frame above, the Analog 2W Loops Service Order Charge for the original Scheduled Conversion Time or the previous New Conversion Time shall be credited waived upon request from ATITalk Unlimited; and 3.3.1.5.2 3.17.1.5.2 If ATI Talk Unlimited requests to reschedule outside the one (1) hour time frame above, ATI Talk Unlimited shall be charged an additional Analog 2W Loops Service Order Charge for rescheduling the conversion to the New Conversion Time. 3.3.1.6 3.17.1.6 If ATI Talk Unlimited is not ready to accept service at the Scheduled Conversion Time or at a New Conversion Time, as applicable, an additional Service Order Charge shall apply. If Verizon is not available or ready to perform the conversion within thirty (30) minutes of the Scheduled Conversion Time or New Conversion Time, as applicable, Verizon and ATI Talk Unlimited will reschedule and, upon request from ATITalk Unlimited, Verizon will credit waive the Analog 2W Loop Service Order Charge for the original Scheduled Conversion Time. 3.3.1.7 3.17.1.7 The standard time interval expected from disconnection of a live Telephone Exchange Service to the connection of the Analog 2W Loops to ATI Talk Unlimited is fifteen (15) minutes per Analog 2W Loop for all orders consisting of twenty (20) Analog 2W Loops or less. Orders involving more than twenty (20) Loops will require a negotiated interval. 3.3.1.8 3.17.1.8 Conversions involving LNP will be completed according to North American Numbering Council (“NANC”) standards, via the regional Number Portability Administration Center (“NPAC”). 3.3.1.9 3.17.1.9 If ATI Talk Unlimited requires Analog 2W Loop conversions outside of the regularly scheduled Verizon RCCC operating hours, such conversions shall be separately negotiated. Additional charges (e.g. overtime labor charges) may apply for desired dates and times outside of regularly scheduled RCCC operating hours.

Conversion of Live Telephone Exchange Service to Analog 2W Loops. 3.3.1 3.17.1 The following coordination procedures shall apply to “live” cutovers of Verizon Customers who are converting their Telephone Exchange Services to ATI Equal Access Telephone Exchange Services provisioned over Analog 2W unbundled Local Loops (“Analog 2W Loops) to be provided by Verizon to ATIEqual Access: 3.3.1.1 3.17.1.1 Coordinated cutover charges shall apply to conversions of live Telephone Exchange Services to Analog 2W Loops. When an outside dispatch is required to perform a conversion, additional charges may apply. If ATI Equal Access does not request a coordinated cutover, Verizon will process ATIEqual Access’s order as a new installation subject to applicable standard provisioning intervals. 3.3.1.2 ATI 3.17.1.2 Equal Access shall request Analog 2W Loops for coordinated cutover from Verizon by delivering to Verizon a valid electronic Local Service Request (“LSR”). Xxxxxxx Verizon agrees to accept from ATI Equal Access the date and time for the conversion designated on the LSR (“Scheduled Conversion Time”), provided that such designation is within the regularly scheduled operating hours of the Verizon Regional CLEC Control Center (“RCCC”) and subject to the availability of Verizon’s work force. In the event that XxxxxxxVerizon’s work force is not available, ATI Equal Access and Verizon shall mutually agree on a New Conversion Time, as defined below. ATI Equal Access shall designate the Scheduled Conversion Time subject to Verizon standard provisioning intervals as stated in the Verizon CLEC Handbook, as may be revised from time to time. Within three (3) Business Days of Verizon's receipt of such valid LSR, or as otherwise required by Applicable Law, Verizon shall provide ATI Equal Access the scheduled due date for conversion of the Analog 2W Loops covered by such LSR. 3.3.1.3 ATI 3.17.1.3 Equal Access shall provide dial tone at the ATI collocation Equal Access Collocation site at least forty-eight (48) hours prior to the Scheduled Conversion Time.Time.‌‌‌‌‌‌‌ 3.3.1.4 3.17.1.4 Either Party may contact the other Party to negotiate a new Scheduled Conversion Time (the “New Conversion Time”); provided, however, that each Party shall use commercially reasonable efforts to provide four (4) business hours’ advance notice to the other Party of its request for a New Conversion Time. Any Scheduled Conversion Time or New Conversion Time may not be rescheduled more than one (1) time in a Business Daybusiness day, and any two New Conversion Times for a particular Analog 2W Loop shall differ by at least eight (8) hours, unless otherwise agreed to by the Parties. 3.3.1.5 3.17.1.5 If the New Conversion Time is more than one (1) business hour from the original Scheduled Conversion Time or from the previous New Conversion Time, the Party requesting such New Conversion Time shall be subject to the following: 3.3.1.5.1 3.17.1.5.1 If Verizon requests to reschedule outside of the one (1) hour time frame above, the Analog 2W Loops Service Order Charge for the original Scheduled Conversion Time or the previous New Conversion Time shall be credited waived upon request from ATIEqual Access; and 3.3.1.5.2 3.17.1.5.2 If ATI Equal Access requests to reschedule outside the one (1) hour time frame above, ATI Equal Access shall be charged an additional Analog 2W Loops Service Order Charge for rescheduling the conversion to the New Conversion Time. 3.3.1.6 3.17.1.6 If ATI Equal Access is not ready to accept service at the Scheduled Conversion Time or at a New Conversion Time, as applicable, an additional Service Order Charge shall apply. If Verizon is not available or ready to perform the conversion within thirty (30) minutes of the Scheduled Conversion Time or New Conversion Time, as applicable, Verizon and ATI Equal Access will reschedule and, upon request from ATIEqual Access, Verizon will credit waive the Analog 2W Loop Service Order Charge for the original Scheduled Conversion Time. 3.3.1.7 3.17.1.7 The standard time interval expected from disconnection of a live Telephone Exchange Service to the connection of the Analog 2W Loops to ATI Equal Access is fifteen (15) minutes per Analog 2W Loop for all orders consisting of twenty (20) Analog 2W Loops or less. Orders involving more than twenty (20) Loops will require a negotiated interval. 3.3.1.8 3.17.1.8 Conversions involving LNP will be completed according to North American Numbering Council (“NANC”) standards, via the regional Number Portability Administration Center (“NPAC”). 3.3.1.9 3.17.1.9 If ATI Equal Access requires Analog 2W Loop conversions outside of the regularly scheduled Verizon RCCC operating hours, such conversions shall be separately negotiated. Additional charges (e.g. overtime labor charges) may apply for desired dates and times outside of regularly scheduled RCCC operating hours.hours.‌‌‌‌‌

Conversion of Live Telephone Exchange Service to Analog 2W Loops. 3.3.1 The following coordination procedures shall apply to “live” cutovers of Verizon VERIZON Customers who are converting their Telephone Exchange Services to ATI SPRINT Telephone Exchange Services provisioned over Analog 2W unbundled Local Loops (“Analog 2W Loops”) to be provided by Verizon VERIZON to ATI:SPRINT. 3.3.1.1 Coordinated 1.9.1 Subject to approval by the Commission, coordinated cutover charges shall apply to conversions of live Telephone Exchange Services to Analog 2W Loops. When an outside dispatch is required to perform a conversion, additional charges may apply. If ATI SPRINT does not request a coordinated cutover, Verizon VERIZON will process ATISPRINT’s order as a new installation subject to applicable standard provisioning intervals. 3.3.1.2 ATI 1.9.2 SPRINT shall request Analog 2W Loops for coordinated cutover from Verizon VERIZON by delivering to Verizon VERIZON a valid electronic Local Service Request (“LSR”). Xxxxxxx VERIZON agrees to accept from ATI SPRINT the date and time for the conversion designated on the LSR (“Scheduled Conversion Time”), provided that such designation is within the regularly scheduled operating hours of the Verizon VERIZON Regional CLEC Control Center (“RCCC”) and subject to the availability of VerizonVERIZON’s work force. In the event that XxxxxxxVERIZON’s work force is not available, ATI SPRINT and Verizon VERIZON shall mutually agree on a New Conversion Time, as defined below. ATI SPRINT shall designate the Scheduled Conversion Time subject to Verizon VERIZON standard provisioning intervals as stated in the Verizon VERIZON CLEC Handbook, as may be revised from time to time. Within three (3) Business Days business days of VerizonVERIZON's receipt of such valid LSR, or as otherwise required by Applicable Law, Verizon VERIZON shall provide ATI SPRINT the scheduled due date for conversion of by which the Analog 2W Loops covered by such LSRLSR will be converted. 3.3.1.3 ATI 1.9.3 SPRINT shall provide dial tone at the ATI collocation SPRINT Collocation site at least forty-eight (48) hours prior to the Scheduled Conversion Time. 3.3.1.4 1.9.4 Either Party may contact the other Party to negotiate a new Scheduled Conversion Time (the “New Conversion Time”); provided, however, that each Party shall use commercially reasonable efforts to provide four (4) business hours’ advance notice to the other Party of its request for a New Conversion Time. Any Scheduled Conversion Time or New Conversion Time may not be rescheduled more than one one (1) time in a Business Daybusiness day, and any two New Conversion Times for a particular Analog 2W Loop Loops shall differ by at least eight (8) hours, unless otherwise agreed to by the Parties. 3.3.1.5 1.9.4.1 If the New Conversion Time is more than one (1) business hour from the original Scheduled Conversion Time or from the previous New Conversion Time, the Party requesting such New Conversion Time shall be subject to the following: 3.3.1.5.1 (i) If Verizon VERIZON requests to reschedule outside of the one (1) hour time frame above, the Analog 2W Loops Service Order Charge for the original Scheduled Conversion Time or the previous New Conversion Time shall be credited waived upon request from ATISPRINT; and 3.3.1.5.2 (ii) If ATI SPRINT requests to reschedule outside the one (1) hour time frame above, ATI SPRINT shall be charged an additional Analog 2W Loops Service Order Charge for rescheduling the conversion to the New Conversion Time. 3.3.1.6 1.9.5 If ATI SPRINT is not ready to accept service at the Scheduled Conversion Time or at a New Conversion Time, as applicable, an additional Service Order Charge shall apply. If Verizon VERIZON is not available or ready to perform the conversion within thirty (30) minutes of the Scheduled Conversion Time or New Conversion Time, as applicable, Verizon VERIZON and ATI SPRINT will reschedule and, upon request from ATISPRINT, Verizon VERIZON will credit waive the Analog 2W Loop Service Order Charge for the original Scheduled Conversion Time. 3.3.1.7 1.9.6 The standard time interval expected from disconnection of a live Telephone Exchange Service to the connection of the Analog 2W Loops to ATI SPRINT is fifteen (15) minutes per Analog 2W Loop for all orders consisting of twenty (20) Analog 2W Loops or less. Orders involving more than twenty (20) Loops will require a negotiated interval. 3.3.1.8 1.9.7 Conversions involving LNP will be completed according to North American Numbering Council (“NANC”) standards, via the regional Number Portability Administration Center (“NPAC”). 3.3.1.9 1.9.8 If ATI SPRINT requires Analog 2W Loop Loops conversions outside of the regularly scheduled Verizon VERIZON RCCC operating hours, such conversions shall be separately negotiated. Additional charges (e.g. overtime labor charges) may apply for desired dates and times outside of regularly scheduled RCCC operating hours.

Conversion of Live Telephone Exchange Service to Analog 2W Loops. 3.3.1 3.17.1 The following coordination procedures shall apply to “live” cutovers of Verizon Customers who are converting their Telephone Exchange Services to ATI Reconex Telephone Exchange Services provisioned over Analog 2W unbundled Local Loops (“Analog 2W Loops) to be provided by Verizon to ATIReconex: 3.3.1.1 3.17.1.1 Coordinated cutover charges shall apply to conversions of live Telephone Exchange Services to Analog 2W Loops. When an outside dispatch is required to perform a conversion, additional charges may apply. If ATI Reconex does not request a coordinated cutover, Verizon will process ATIReconex’s order as a new installation subject to applicable standard provisioning intervals. 3.3.1.2 ATI 3.17.1.2 Reconex shall request Analog 2W Loops for coordinated cutover from Verizon by delivering to Verizon a valid electronic Local Service Request (“LSR”). Xxxxxxx Verizon agrees to accept from ATI Reconex the date and time for the conversion designated on the LSR (“Scheduled Conversion Time”), provided that such designation is within the regularly scheduled operating hours of the Verizon Regional CLEC Control Center (“RCCC”) and subject to the availability of Verizon’s work force. In the event that XxxxxxxVerizon’s work force is not available, ATI Reconex and Verizon shall mutually agree on a New Conversion Time, as defined below. ATI Reconex shall designate the Scheduled Conversion Time subject to Verizon standard provisioning intervals as stated in the Verizon CLEC Handbook, as may be revised from time to time. Within three (3) Business Days of Verizon's ’s receipt of such valid LSR, or as otherwise required by Applicable Law, Verizon shall provide ATI Reconex the scheduled due date for conversion of the Analog 2W Loops covered by such LSR. 3.3.1.3 ATI 3.17.1.3 Reconex shall provide dial tone at the ATI collocation Reconex Collocation site at least forty-eight (48) hours prior to the Scheduled Conversion Time. 3.3.1.4 3.17.1.4 Either Party may contact the other Party to negotiate a new Scheduled Conversion Time (the “New Conversion Time”); provided, however, that each Party shall use commercially reasonable efforts to provide four (4) business hours’ advance notice to the other Party of its request for a New Conversion Time. Any Scheduled Conversion Time or New Conversion Time may not be rescheduled more than one one (1) time in a Business Day, and any two New Conversion Times for a particular Analog 2W Loop Loops shall differ by at least eight (8) hours, unless otherwise agreed to by the Parties. 3.3.1.5 3.17.1.5 If the New Conversion Time is more than one (1) business hour from the original Scheduled Conversion Time or from the previous New Conversion Time, the Party requesting such New Conversion Time shall be subject to the following: 3.3.1.5.1 3.17.1.5.1 If Verizon requests to reschedule outside of the one (1) hour time frame above, the Analog 2W Loops Service Order Charge for the original Scheduled Conversion Time or the previous New Conversion Time shall be credited waived upon request from ATIReconex; and 3.3.1.5.2 3.17.1.5.2 If ATI Reconex requests to reschedule outside the one (1) hour time frame above, ATI Reconex shall be charged an additional Analog 2W Loops Service Order Charge for rescheduling the conversion to the New Conversion Time. 3.3.1.6 3.17.1.6 If ATI Reconex is not ready to accept service at the Scheduled Conversion Time or at a New Conversion Time, as applicable, an additional Service Order Charge shall apply. If Verizon is not available or ready to perform the conversion within thirty (30) minutes of the Scheduled Conversion Time or New Conversion Time, as applicable, Verizon and ATI Reconex will reschedule and, upon request from ATIReconex, Verizon will credit waive the Analog 2W Loop Service Order Charge for the original Scheduled Conversion Time. 3.3.1.7 3.17.1.7 The standard time interval expected from disconnection of a live Telephone Exchange Service to the connection of the Analog 2W Loops to ATI Reconex is fifteen (15) minutes per Analog 2W Loop for all orders consisting of twenty (20) Analog 2W Loops or less. Orders involving more than twenty (20) Loops will require a negotiated interval. 3.3.1.8 3.17.1. 8 Conversions involving LNP will be completed according to North American Numbering Council (“NANC”) standards, via the regional Number Portability Administration Center (“NPAC”). 3.3.1.9 If ATI requires Analog 2W Loop conversions outside of the regularly scheduled Verizon RCCC operating hours, such conversions shall be separately negotiated. Additional charges (e.g. overtime labor charges) may apply for desired dates and times outside of regularly scheduled RCCC operating hours.

Conversion of Live Telephone Exchange Service to Analog 2W Loops. 3.3.1 The following coordination procedures shall apply to “live” cutovers of Verizon Customers who are converting their Telephone Exchange Services to ATI VNCI Telephone Exchange Services provisioned over Analog 2W unbundled Local Loops (“Analog 2W Loops) to be provided by Verizon to ATIVNCI: 3.3.1.1 Coordinated cutover charges shall apply to conversions of live Telephone Exchange Services to Analog 2W Loops. When an outside dispatch is required to perform a conversion, additional charges may apply. If ATI VNCI does not request a coordinated cutover, Verizon will process ATIVNCI’s order as a new installation subject to applicable standard provisioning intervals. 3.3.1.2 ATI VNCI shall request Analog 2W Loops for coordinated cutover from Verizon by delivering to Verizon a valid electronic Local Service Request (“LSR”). Xxxxxxx Verizon agrees to accept from ATI VNCI the date and time for the conversion designated on the LSR (“Scheduled Conversion Time”), provided that such designation is within the regularly scheduled operating hours of the Verizon Regional CLEC Control Center (“RCCC”) and subject to the availability of Verizon’s work force. In the event that XxxxxxxVerizon’s work force is not available, ATI VNCI and Verizon shall mutually agree on a New Conversion Time, as defined below. ATI VNCI shall designate the Scheduled Conversion Time subject to Verizon standard provisioning intervals as stated in the Verizon CLEC Handbook, as may be revised from time to time. Within three (3) Business Days of Verizon's receipt of such valid LSR, or as otherwise required by Applicable Law, Verizon shall provide ATI VNCI the scheduled due date for conversion of the Analog 2W Loops covered by such LSR. 3.3.1.3 ATI VNCI shall provide dial tone at the ATI VNCI collocation site at least forty-eight (48) hours prior to the Scheduled Conversion Time. 3.3.1.4 Either Party may contact the other Party to negotiate a new Scheduled Conversion Time (the “New Conversion Time”); provided, however, that each Party shall use commercially reasonable efforts to provide four (4) business hours’ advance notice to the other Party of its request for a New Conversion Time. Any Scheduled Conversion Time or New Conversion Time may not be rescheduled more than one (1) time in a Business Day, and any two New Conversion Times for a particular Analog 2W Loop shall differ by at least eight (8) hours, unless otherwise agreed to by the Parties. 3.3.1.5 If the New Conversion Time is more than one (1) business hour from the original Scheduled Conversion Time or from the previous New Conversion Time, the Party requesting such New Conversion Time shall be subject to the following: 3.3.1.5.1 If Verizon requests to reschedule outside of the one (1) hour time frame above, the Analog 2W Loops Service Order Charge for the original Scheduled Conversion Time or the previous New Conversion Time shall be credited upon request from ATIVNCI; and 3.3.1.5.2 If ATI VNCI requests to reschedule outside the one one (1) hour time frame above, ATI VNCI shall be charged an additional Analog 2W Loops Service Order Charge for rescheduling the conversion to the New Conversion Time. 3.3.1.6 If ATI VNCI is not ready to accept service at the Scheduled Conversion Time or at a New Conversion Time, as applicable, an additional Service Order Charge shall apply. If Verizon is not available or ready to perform the conversion within thirty (30) minutes of the Scheduled Conversion Time or New Conversion Time, as applicable, Verizon and ATI VNCI will reschedule and, upon request from ATIVNCI, Verizon will credit the Analog 2W Loop Service Order Charge for the original Scheduled Conversion Time. 3.3.1.7 The standard time interval expected from disconnection of a live Telephone Exchange Service to the connection of the Analog 2W Loops to ATI VNCI is fifteen (15) minutes per Analog 2W Loop for all orders consisting of twenty (20) Analog 2W Loops or less. Orders involving more than twenty (20) Loops will require a negotiated interval. 3.3.1.8 Conversions involving LNP will be completed according to North American Numbering Council (NANC) standards, via the regional Number Portability Administration Center (NPAC). 3.3.1.9 If ATI VNCI requires Analog 2W Loop conversions outside of the regularly scheduled Verizon RCCC operating hours, such conversions shall be separately negotiated. Additional charges (e.g. overtime labor charges) may apply for desired dates and times outside of regularly scheduled RCCC operating hours.

Conversion of Live Telephone Exchange Service to Analog 2W Loops. 3.3.1 ‌ The following coordination procedures shall apply to “live” cutovers of Verizon BA Customers who are converting their Telephone Exchange Services to ATI Mpower Telephone Exchange Services provisioned over Analog 2W unbundled Local Loops (“Analog 2W LoopsLoop”s) to be provided by Verizon BA to ATI:Mpower. 3.3.1.1 Coordinated 11.9.1 Subject to approval by the Commission, coordinated cutover charges shall apply to conversions of live Telephone Exchange Services to Analog 2W Loops. When an outside dispatch is required to perform a conversion, additional charges may apply. If ATI Mpower does not request a coordinated cutover, Verizon BA will process ATIMpower’s order as a new installation subject to applicable standard provisioning intervals. 3.3.1.2 ATI 11.9.2 Mpower shall request Analog 2W Loops for coordinated cutover from Verizon BA by delivering to Verizon BA a valid electronic Local Service Request (“LSR”). Xxxxxxx BA agrees to accept from ATI Mpower the date and time for the conversion designated on the LSR (“Scheduled Conversion Time”), provided that such designation is within the regularly scheduled operating hours of the Verizon BA Regional CLEC Control Center (“RCCC”) and subject to the availability of VerizonBA’s work force. In the event that XxxxxxxBA’s work force is not available, ATI Mpower and Verizon BA shall mutually agree on a New Conversion Time, as defined below. ATI Mpower shall designate the Scheduled Conversion Time subject to Verizon BA standard provisioning intervals as stated in the Verizon BA CLEC Handbook, as may be revised from time to time. Within three two (32) Business Days business days of VerizonBA's receipt of such valid LSR, or as otherwise required by Applicable Law, Verizon BA shall provide ATI Mpower the scheduled due firm order commitment (“FOC”) date for conversion of by which the Analog 2W Loops covered by such LSRLSR will be converted. 3.3.1.3 ATI 11.9.3 Mpower shall provide dial tone at the ATI collocation Mpower Collocation site at least forty-eight (48) hours prior to the Scheduled Conversion Time. 3.3.1.4 11.9.4 Either Party may contact the other Party to negotiate a new Scheduled Conversion Time (the “New Conversion Time”); provided, however, that each Party shall use commercially reasonable efforts to provide four (4) business hours’ advance notice to the other Party of its request for a New Conversion Time. Any Scheduled Conversion Time or New Conversion Time may not be rescheduled more than one one (1) time in a Business Daybusiness day, and any two New Conversion Times for a particular Analog 2W Loop Loops shall differ by at least eight (8) hours, unless otherwise agreed to by the Parties. 3.3.1.5 11.9.4.1 If the New Conversion Time is more than one (1) business hour from the original Scheduled Conversion Time or from the previous New Conversion Time, the Party requesting such New Conversion Time shall be subject to the following: 3.3.1.5.1 (i) If Verizon BA requests to reschedule outside of the one (1) hour time frame above, the Analog 2W Loops Service Order Charge for the original Scheduled Conversion Time or the previous New Conversion Time shall be credited waived upon request from ATIMpower; and 3.3.1.5.2 (ii) If ATI Mpower requests to reschedule outside the one (1) hour time frame above, ATI Mpower shall be charged an additional Analog 2W Loops Service Order Charge for rescheduling the conversion to the New Conversion Time.Time.‌ 3.3.1.6 11.9.5 If ATI Mpower is not ready to accept service at the Scheduled Conversion Time or at a New Conversion Time, as applicable, an additional Service Order Charge shall apply. If Verizon BA is not available or ready to perform the conversion within thirty (30) minutes of the Scheduled Conversion Time or New Conversion Time, as applicable, Verizon BA and ATI Mpower will reschedule and, upon request from ATIMpower, Verizon BA will credit waive the Analog 2W Loop Service Order Charge for the original Scheduled Conversion Time. 3.3.1.7 11.9.6 The standard time interval expected from disconnection of a live Telephone Exchange Service to the connection of the Analog 2W Loops to ATI Mpower is fifteen (15) minutes per Analog 2W Loop for all orders consisting of twenty (20) Analog 2W Loops or less. Orders involving more than twenty (20) Loops will require a negotiated interval. 3.3.1.8 Conversions involving LNP will be completed according to North American Numbering Council (NANC) standards, via the regional Number Portability Administration Center (NPAC). 3.3.1.9 If ATI requires Analog 2W Loop conversions outside of the regularly scheduled Verizon RCCC operating hours, such conversions shall be separately negotiated. Additional charges (e.g. overtime labor charges) may apply for desired dates and times outside of regularly scheduled RCCC operating hours.fifteen

Conversion of Live Telephone Exchange Service to Analog 2W Loops. 3.3.1 3.17.1 The following coordination procedures shall apply to “live” cutovers of Verizon Customers who are converting their Telephone Exchange Services to ATI VarTec Telephone Exchange Services provisioned over Analog 2W unbundled Local Loops (“Analog 2W Loops) to be provided by Verizon to ATIVarTec: 3.3.1.1 3.17.1.1 Coordinated cutover charges shall apply to conversions of live Telephone Exchange Services to Analog 2W Loops. When an outside dispatch is required to perform a conversion, additional charges may apply. If ATI VarTec does not request a coordinated cutover, Verizon will process ATIVarTec’s order as a new installation subject to applicable standard provisioning intervals. 3.3.1.2 ATI 3.17.1.2 VarTec shall request Analog 2W Loops for coordinated cutover from Verizon by delivering to Verizon a valid electronic Local Service Request (“LSR”). Xxxxxxx Verizon agrees to accept from ATI VarTec the date and time for the conversion designated on the LSR (“Scheduled Conversion Time”), provided that such designation is within the regularly scheduled operating hours of the Verizon Regional CLEC Control Center (“RCCC”) and subject to the availability of Verizon’s work force. In the event that XxxxxxxVerizon’s work force is not available, ATI VarTec and Verizon shall mutually agree on a New Conversion Time, as defined below. ATI VarTec shall designate the Scheduled Conversion Time subject to Verizon standard provisioning intervals as stated in the Verizon CLEC Handbook, as may be revised from time to time. Within three (3) Business Days of Verizon's receipt of such valid LSR, or as otherwise required by Applicable Law, Verizon shall provide ATI VarTec the scheduled due date for conversion of the Analog 2W Loops covered by such LSR. 3.3.1.3 ATI 3.17.1.3 VarTec shall provide dial tone at the ATI collocation VarTec Collocation site at least forty-eight (48) hours prior to the Scheduled Conversion Time. 3.3.1.4 3.17.1.4 Either Party may contact the other Party to negotiate a new Scheduled Conversion Time (the “New Conversion Time”); provided, however, that each Party shall use commercially reasonable efforts to provide four (4) business hours’ advance notice to the other Party of its request for a New Conversion Time. Any Scheduled Conversion Time or New Conversion Time may not be rescheduled more than one (1) time in a Business Daybusiness day, and any two New Conversion Times for a particular Analog 2W Loop shall differ by at least eight (8) hours, unless otherwise agreed to by the Parties. 3.3.1.5 3.17.1.5 If the New Conversion Time is more than one (1) business hour from the original Scheduled Conversion Time or from the previous New Conversion Time, the Party requesting such New Conversion Time shall be subject to the following: 3.3.1.5.1 3.17.1.5.1 If Verizon requests to reschedule outside of the one (1) hour time frame above, the Analog 2W Loops Service Order Charge for the original Scheduled Conversion Time or the previous New Conversion Time shall be credited waived upon request from ATIVarTec; and 3.3.1.5.2 3.17.1.5.2 If ATI VarTec requests to reschedule outside the one one (1) hour time frame above, ATI VarTec shall be charged an additional Analog 2W Loops Service Order Charge for rescheduling the conversion to the New Conversion Time. 3.3.1.6 3.17.1.6 If ATI VarTec is not ready to accept service at the Scheduled Conversion Time or at a New Conversion Time, as applicable, an additional Service Order Charge shall apply. If Verizon is not available or ready to perform the conversion within thirty (30) minutes of the Scheduled Conversion Time or New Conversion Time, as applicable, Verizon and ATI VarTec will reschedule and, upon request from ATIVarTec, Verizon will credit waive the Analog 2W Loop Service Order Charge for the original Scheduled Conversion Time. 3.3.1.7 3.17.1.7 The standard time interval expected from disconnection of a live Telephone Exchange Service to the connection of the Analog 2W Loops to ATI VarTec is fifteen (15) minutes per Analog 2W Loop for all orders consisting of twenty (20) Analog 2W Loops or less. Orders involving more than twenty (20) Loops will require a negotiated interval. 3.3.1.8 3.17.1.8 Conversions involving LNP will be completed according to North American Numbering Council (“NANC”) standards, via the regional Number Portability Administration Center (“NPAC”). 3.3.1.9 3.17.1.9 If ATI VarTec requires Analog 2W Loop conversions outside of the regularly scheduled Verizon RCCC operating hours, such conversions shall be separately negotiated. Additional charges (e.g. overtime labor charges) may apply for desired dates and times outside of regularly scheduled RCCC operating hours.

Conversion of Live Telephone Exchange Service to Analog 2W Loops. 3.3.1 3.17.1 The following coordination procedures shall apply to “live” cutovers of Verizon Customers who are converting their Telephone Exchange Services to ATI Buckeye Telephone Exchange Services provisioned over Analog 2W unbundled Local Loops (“Analog 2W Loops) to be provided by Verizon to ATIBuckeye: 3.3.1.1 3.17.1.1 Coordinated cutover charges shall apply to conversions of live Telephone Exchange Services to Analog 2W Loops. When an outside dispatch is required to perform a conversion, additional charges may apply. If ATI Buckeye does not request a coordinated cutover, Verizon will process ATIBuckeye’s order as a new installation subject to applicable standard provisioning intervals. 3.3.1.2 ATI 3.17.1.2 Buckeye shall request Analog 2W Loops for coordinated cutover from Verizon by delivering to Verizon a valid electronic Local Service Request (“LSR”). Xxxxxxx Verizon agrees to accept from ATI Buckeye the date and time for the conversion designated on the LSR (“Scheduled Conversion Time”), provided that such designation is within the regularly scheduled operating hours of the Verizon Regional CLEC Control Center (“RCCC”) and subject to the availability of Verizon’s work force. In the event that XxxxxxxVerizon’s work force is not available, ATI Buckeye and Verizon shall mutually agree on a New Conversion Time, as defined below. ATI Buckeye shall designate the Scheduled Conversion Time subject to Verizon standard provisioning intervals as stated in the Verizon CLEC Handbook, as may be revised from time to time. Within three (3) Business Days of Verizon's receipt of such valid LSR, or as otherwise required by Applicable Law, Verizon shall provide ATI Buckeye the scheduled due date for conversion of the Analog 2W Loops covered by such LSR. 3.3.1.3 ATI 3.17.1.3 Buckeye shall provide dial tone at the ATI collocation Buckeye Collocation site at least forty-eight (48) hours prior to the Scheduled Conversion Time. 3.3.1.4 3.17.1.4 Either Party may contact the other Party to negotiate a new Scheduled Conversion Time (the “New Conversion Time”); provided, however, that each Party shall use commercially reasonable efforts to provide four (4) business hours’ advance notice to the other Party of its request for a New Conversion Time. Any Scheduled Conversion Time or New Conversion Time may not be rescheduled more than one (1) time in a Business Day, and any two New Conversion Times for a particular Analog 2W Loop shall differ by at least eight (8) hours, unless otherwise agreed to by the Parties. 3.3.1.5 3.17.1.5 If the New Conversion Time is more than one (1) business hour from the original Scheduled Conversion Time or from the previous New Conversion Time, the Party requesting such New Conversion Time shall be subject to the following: 3.3.1.5.1 3.17.1.5.1 If Verizon requests to reschedule outside of the one (1) hour time frame above, the Analog 2W Loops Service Order Charge for the original Scheduled Conversion Time or the previous New Conversion Time shall be credited waived upon request from ATIBuckeye; and 3.3.1.5.2 3.17.1.5.2 If ATI Buckeye requests to reschedule outside the one (1) hour time frame above, ATI Buckeye shall be charged an additional Analog 2W Loops Service Order Charge for rescheduling the conversion to the New Conversion Time. 3.3.1.6 3.17.1.6 If ATI Buckeye is not ready to accept service at the Scheduled Conversion Time or at a New Conversion Time, as applicable, an additional Service Order Charge shall apply. If Verizon is not available or ready to perform the conversion within thirty (30) minutes of the Scheduled Conversion Time or New Conversion Time, as applicable, Verizon and ATI Buckeye will reschedule and, upon request from ATIBuckeye, Verizon will credit waive the Analog 2W Loop Service Order Charge for the original Scheduled Conversion Time. 3.3.1.7 3.17.1.7 The standard time interval expected from disconnection of a live Telephone Exchange Service to the connection of the Analog 2W Loops to ATI Buckeye is fifteen (15) minutes per Analog 2W Loop for all orders consisting of twenty (20) Analog 2W Loops or less. Orders involving more than twenty (20) Loops will require a negotiated interval. 3.3.1.8 3.17.1.8 Conversions involving LNP will be completed according to North American Numbering Council (“NANC”) standards, via the regional Number Portability Administration Center (“NPAC”). 3.3.1.9 3.17.1.9 If ATI Buckeye requires Analog 2W Loop conversions outside of the regularly scheduled Verizon RCCC operating hours, such conversions shall be separately negotiated. Additional charges (e.g. overtime labor charges) may apply for desired dates and times outside of regularly scheduled RCCC operating hours.

Conversion of Live Telephone Exchange Service to Analog 2W Loops. 3.3.1 The following coordination procedures shall apply to “live” cutovers of Verizon Customers who are converting their Telephone Exchange Services to ATI Covista Telephone Exchange Services provisioned over Analog 2W unbundled Local Loops (“Analog 2W Loops) to be provided by Verizon to ATICovista: 3.3.1.1 Coordinated cutover charges shall apply to conversions of live Telephone Exchange Services to Analog 2W Loops. When an outside dispatch is required to perform a conversion, additional charges may apply. If ATI Covista does not request a coordinated cutover, Verizon will process ATICovista’s order as a new installation subject to applicable standard provisioning intervals. 3.3.1.2 ATI Covista shall request Analog 2W Loops for coordinated cutover from Verizon by delivering to Verizon a valid electronic Local Service Request (“LSR”). Xxxxxxx Verizon agrees to accept from ATI Covista the date and time for the conversion designated on the LSR (“Scheduled Conversion Time”), provided that such designation is within the regularly scheduled operating hours of the Verizon Regional CLEC Control Center (“RCCC”) and subject to the availability of Verizon’s work force. In the event that XxxxxxxVerizon’s work force is not available, ATI Covista and Verizon shall mutually agree on a New Conversion Time, as defined below. ATI Covista shall designate the Scheduled Conversion Time subject to Verizon standard provisioning intervals as stated in the Verizon CLEC Handbook, as may be revised from time to time. Within three (3) Business Days of Verizon's receipt of such valid LSR, or as otherwise required by Applicable Law, Verizon shall provide ATI Covista the scheduled due date for conversion of the Analog 2W Loops covered by such LSR. 3.3.1.3 ATI Covista shall provide dial tone at the ATI Covista collocation site at least forty-eight (48) hours prior to the Scheduled Conversion Time. 3.3.1.4 Either Party may contact the other Party to negotiate a new Scheduled Conversion Time (the “New Conversion Time”); provided, however, that each Party shall use commercially reasonable efforts to provide four (4) business hours’ advance notice to the other Party of its request for a New Conversion Time. Any Scheduled Conversion Time or New Conversion Time may not be rescheduled more than one (1) time in a Business Day, and any two New Conversion Times for a particular Analog 2W Loop shall differ by at least eight (8) hours, unless otherwise agreed to by the Parties. 3.3.1.5 If the New Conversion Time is more than one (1) business hour from the original Scheduled Conversion Time or from the previous New Conversion Time, the Party requesting such New Conversion Time shall be subject to the following: 3.3.1.5.1 If Verizon requests to reschedule outside of the one (1) hour time frame above, the Analog 2W Loops Service Order Charge for the original Scheduled Conversion Time or the previous New Conversion Time shall be credited upon request from ATICovista; and 3.3.1.5.2 If ATI Covista requests to reschedule outside the one (1) hour time frame above, ATI Covista shall be charged an additional Analog 2W Loops Service Order Charge for rescheduling the conversion to the New Conversion Time. 3.3.1.6 If ATI Covista is not ready to accept service at the Scheduled Conversion Time or at a New Conversion Time, as applicable, an additional Service Order Charge shall apply. If Verizon is not available or ready to perform the conversion within thirty (30) minutes of the Scheduled Conversion Time or New Conversion Time, as applicable, Verizon and ATI Covista will reschedule and, upon request from ATICovista, Verizon will credit the Analog 2W Loop Service Order Charge for the original Scheduled Conversion Time. 3.3.1.7 The standard time interval expected from disconnection of a live Telephone Exchange Service to the connection of the Analog 2W Loops to ATI Covista is fifteen (15) minutes per Analog 2W Loop for all orders consisting of twenty (20) Analog 2W Loops or less. Orders involving more than twenty (20) Loops will require a negotiated interval. 3.3.1.8 Conversions involving LNP will be completed according to North American Numbering Council (NANC) standards, via the regional Number Portability Administration Center (NPAC). 3.3.1.9 If ATI Covista requires Analog 2W Loop conversions outside of the regularly scheduled Verizon RCCC operating hours, such conversions shall be separately negotiated. Additional charges (e.g. overtime labor charges) may apply for desired dates and times outside of regularly scheduled RCCC operating hours.

Conversion of Live Telephone Exchange Service to Analog 2W Loops. 3.3.1 3.17.1 The following coordination procedures shall apply to “live” cutovers of Verizon Customers who are converting their Telephone Exchange Services to ATI ICG Telephone Exchange Services provisioned over Analog 2W unbundled Local Loops (“Analog 2W Loops) to be provided by Verizon to ATIICG: 3.3.1.1 3.17.1.1 Coordinated cutover charges shall apply to conversions of live Telephone Exchange Services to Analog 2W Loops. When an outside dispatch is required to perform a conversion, additional charges may apply. If ATI ICG does not request a coordinated cutover, Verizon will process ATIICG’s order as a new installation subject to applicable standard provisioning intervals. 3.3.1.2 ATI 3.17.1.2 ICG shall request Analog 2W Loops for coordinated cutover from Verizon by delivering to Verizon a valid electronic Local Service Request (“LSR”). Xxxxxxx agrees to accept from ATI ICG the date and time for the conversion designated on the LSR (“Scheduled Conversion Time”), provided that such designation is within the regularly scheduled operating hours of the Verizon Regional CLEC Control Center (“RCCC”) and subject to the availability of Verizon’s work force. In the event that Xxxxxxx’s work force is not available, ATI ICG and Verizon shall mutually agree on a New Conversion Time, as defined below. ATI ICG shall designate the Scheduled Conversion Time subject to Verizon standard provisioning intervals as stated in the Verizon CLEC Handbook, as may be revised from time to time. Within three (3) Business Days of Verizon's receipt of such valid LSR, or as otherwise required by Applicable Law, Verizon shall provide ATI ICG the scheduled due date for conversion of the Analog 2W Loops covered by such LSR. 3.3.1.3 ATI 3.17.1.3 ICG shall provide dial tone at the ATI collocation ICG Collocation site at least forty-forty- eight (48) hours prior to the Scheduled Conversion Time. 3.3.1.4 3.17.1.4 Either Party may contact the other Party to negotiate a new Scheduled Conversion Time (the “New Conversion Time”); provided, however, that each Party shall use commercially reasonable efforts to provide four (4) business hours’ advance notice to the other Party of its request for a New Conversion Time. Any Scheduled Conversion Time or New Conversion Time may not be rescheduled more than one one (1) time in a Business Day, and any two New Conversion Times for a particular Analog 2W Loop Loops shall differ by at least eight (8) hours, unless otherwise agreed to by the Parties. 3.3.1.5 3.17.1.5 If the New Conversion Time is more than one (1) business hour from the original Scheduled Conversion Time or from the previous New Conversion Time, the Party requesting such New Conversion Time shall be subject to the following: 3.3.1.5.1 3.17.1.5.1 If Verizon requests to reschedule outside of the one (1) hour time frame above, the Analog 2W Loops Service Order Charge for the original Scheduled Conversion Time or the previous New Conversion Time shall be credited waived upon request from ATIICG; and 3.3.1.5.2 3.17.1.5.2 If ATI ICG requests to reschedule outside the one (1) hour time frame above, ATI ICG shall be charged an additional Analog 2W Loops Service Order Charge for rescheduling the conversion to the New Conversion Time. 3.3.1.6 3.17.1.6 If ATI ICG is not ready to accept service at the Scheduled Conversion Time or at a New Conversion Time, as applicable, an additional Service Order Charge shall apply. If Verizon is not available or ready to perform the conversion within thirty (30) minutes of the Scheduled Conversion Time or New Conversion Time, as applicable, Verizon and ATI ICG will reschedule and, upon request from ATIICG, Verizon will credit waive the Analog 2W Loop Service Order Charge for the original Scheduled Conversion Time. 3.3.1.7 3.17.1.7 The standard time interval expected from disconnection of a live Telephone Exchange Service to the connection of the Analog 2W Loops to ATI ICG is fifteen (15) minutes per Analog 2W Loop for all orders consisting of twenty (20) Analog 2W Loops or less. Orders involving more than twenty (20) Loops will require a negotiated interval. 3.3.1.8 3.17.1.8 Conversions involving LNP will be completed according to North American Numbering Council (“NANC”) standards, via the regional Number Portability Administration Center (“NPAC”). 3.3.1.9 3.17.1.9 If ATI ICG requires Analog 2W Loop conversions outside of the regularly scheduled Verizon RCCC operating hours, such conversions shall be separately negotiated. Additional charges (e.g. overtime labor charges) may apply for desired dates and times outside of regularly scheduled RCCC operating hours.

Conversion of Live Telephone Exchange Service to Analog 2W Loops. 3.3.1 3.17.1 The following coordination procedures shall apply to “live” cutovers of Verizon Customers who are converting their Telephone Exchange Services to ATI DSCI Telephone Exchange Services provisioned over Analog 2W unbundled Local Loops (“Analog 2W Loops) to be provided by Verizon to ATIDSCI: 3.3.1.1 3.17.1.1 Coordinated cutover charges shall apply to conversions of live Telephone Exchange Services to Analog 2W Loops. When an outside dispatch is required to perform a conversion, additional charges may apply. If ATI DSCI does not request a coordinated cutover, Verizon will process ATIDSCI’s order as a new installation subject to applicable standard provisioning intervals. 3.3.1.2 ATI 3.17.1.2 DSCI shall request Analog 2W Loops for coordinated cutover from Verizon by delivering to Verizon a valid electronic Local Service Request (“LSR”). Xxxxxxx Verizon agrees to accept from ATI DSCI the date and time for the conversion designated on the LSR (“Scheduled Conversion Time”), provided that such designation is within the regularly scheduled operating hours of the Verizon Regional CLEC Control Center (“RCCC”) and subject to the availability of Verizon’s work force. In the event that XxxxxxxVerizon’s work force is not available, ATI DSCI and Verizon shall mutually agree on a New Conversion Time, as defined below. ATI DSCI shall designate the Scheduled Conversion Time subject to Verizon standard provisioning intervals as stated in the Verizon CLEC Handbook, as may be revised from time to time. Within three (3) Business Days of Verizon's receipt of such valid LSR, or as otherwise required by Applicable Law, Verizon shall provide ATI DSCI the scheduled due date for conversion of the Analog 2W Loops covered by such LSR. 3.3.1.3 ATI 3.17.1.3 DSCI shall provide dial tone at the ATI collocation DSCI Collocation site at least forty-eight (48) hours prior to the Scheduled Conversion Time. 3.3.1.4 3.17.1.4 Either Party may contact the other Party to negotiate a new Scheduled Conversion Time (the “New Conversion Time”); provided, however, that each Party shall use commercially reasonable efforts to provide four (4) business hours’ advance notice to the other Party of its request for a New Conversion Time. Any Scheduled Conversion Time or New Conversion Time may not be rescheduled more than oneone‌‌‌‌‌‌‌ (1) time in a Business Day, and any two New Conversion Times for a particular Analog 2W Loop shall differ by at least eight (8) hours, unless otherwise agreed to by the Parties. 3.3.1.5 3.17.1.5 If the New Conversion Time is more than one (1) business hour from the original Scheduled Conversion Time or from the previous New Conversion Time, the Party requesting such New Conversion Time shall be subject to the following: 3.3.1.5.1 3.17.1.5.1 If Verizon requests to reschedule outside of the one (1) hour time frame above, the Analog 2W Loops Service Order Charge for the original Scheduled Conversion Time or the previous New Conversion Time shall be credited waived upon request from ATIDSCI; and 3.3.1.5.2 3.17.1.5.2 If ATI DSCI requests to reschedule outside the one one (1) hour time frame above, ATI DSCI shall be charged an additional Analog 2W Loops Service Order Charge for rescheduling the conversion to the New Conversion Time. 3.3.1.6 3.17.1.6 If ATI DSCI is not ready to accept service at the Scheduled Conversion Time or at a New Conversion Time, as applicable, an additional Service Order Charge shall apply. If Verizon is not available or ready to perform the conversion within thirty (30) minutes of the Scheduled Conversion Time or New Conversion Time, as applicable, Verizon and ATI DSCI will reschedule and, upon request from ATIDSCI, Verizon will credit waive the Analog 2W Loop Service Order Charge for the original Scheduled Conversion Time. 3.3.1.7 3.17.1.7 The standard time interval expected from disconnection of a live Telephone Exchange Service to the connection of the Analog 2W Loops to ATI DSCI is fifteen (15) minutes per Analog 2W Loop for all orders consisting of twenty (20) Analog 2W Loops or less. Orders involving more than twenty (20) Loops will require a negotiated interval. 3.3.1.8 3.17.1.8 Conversions involving LNP will be completed according to North American Numbering Council (“NANC”) standards, via the regional Number Portability Administration Center (“NPAC”). 3.3.1.9 3.17.1.9 If ATI DSCI requires Analog 2W Loop conversions outside of the regularly scheduled Verizon RCCC operating hours, such conversions shall be separately negotiated. Additional charges (e.g. overtime labor charges) may apply for desired dates and times outside of regularly scheduled RCCC operating hours.desired

Conversion of Live Telephone Exchange Service to Analog 2W Loops. 3.3.1 3.17.1 The following coordination procedures shall apply to “live” cutovers of Verizon Customers who are converting their Telephone Exchange Services to ATI Excel Telephone Exchange Services provisioned over Analog 2W unbundled Local Loops (“Analog 2W Loops) to be provided by Verizon to ATIExcel: 3.3.1.1 3.17.1.1 Coordinated cutover charges shall apply to conversions of live Telephone Exchange Services to Analog 2W Loops. When an outside dispatch is required to perform a conversion, additional charges may apply. If ATI Excel does not request a coordinated cutover, Verizon will process ATIExcel’s order as a new installation subject to applicable standard provisioning intervals. 3.3.1.2 ATI 3.17.1.2 Excel shall request Analog 2W Loops for coordinated cutover from Verizon by delivering to Verizon a valid electronic Local Service Request (“LSR”). Xxxxxxx Verizon agrees to accept from ATI Excel the date and time for the conversion designated on the LSR (“Scheduled Conversion Time”), provided that such designation is within the regularly scheduled operating hours of the Verizon Regional CLEC Control Center (“RCCC”) and subject to the availability of Verizon’s work force. In the event that XxxxxxxVerizon’s work force is not available, ATI Excel and Verizon shall mutually agree on a New Conversion Time, as defined below. ATI Excel shall designate the Scheduled Conversion Time subject to Verizon standard provisioning intervals as stated in the Verizon CLEC Handbook, as may be revised from time to time. Within three (3) Business Days of Verizon's ’s receipt of such valid LSR, or as otherwise required by Applicable Law, Verizon shall provide ATI Excel the scheduled due date for conversion of the Analog 2W Loops covered by such LSR. 3.3.1.3 ATI 3.17.1.3 Excel shall provide dial tone at the ATI collocation Excel Collocation site at least forty-eight (48) hours prior to the Scheduled Conversion Time. 3.3.1.4 3.17.1.4 Either Party may contact the other Party to negotiate a new Scheduled Conversion Time (the “New Conversion Time”); provided, however, that each Party shall use commercially reasonable efforts to provide four (4) business hours’ advance notice to the other Party of its request for a New Conversion Time. Any Scheduled Conversion Time or New Conversion Time may not be rescheduled more than one one (1) time in a Business Day, and any two New Conversion Times for a particular Analog 2W Loop shall differ by at least eight (8) hours, unless otherwise agreed to by the Parties. 3.3.1.5 3.17.1.5 If the New Conversion Time is more than one (1) business hour from the original Scheduled Conversion Time or from the previous New Conversion Time, the Party requesting such New Conversion Time shall be subject to the following: 3.3.1.5.1 3.17.1.5.1 If Verizon requests to reschedule outside of the one (1) hour time frame above, the Analog 2W Loops Service Order Charge for the original Scheduled Conversion Time or the previous New Conversion Time shall be credited waived upon request from ATIExcel; and 3.3.1.5.2 3.17.1.5.2 If ATI Excel requests to reschedule outside the one (1) hour time frame above, ATI Excel shall be charged an additional Analog 2W Loops Service Order Charge for rescheduling the conversion to the New Conversion Time. 3.3.1.6 3.17.1.6 If ATI Excel is not ready to accept service at the Scheduled Conversion Time or at a New Conversion Time, as applicable, an additional Service Order Charge shall apply. If Verizon is not available or ready to perform the conversion within thirty (30) minutes of the Scheduled Conversion Time or New Conversion Time, as applicable, Verizon and ATI Excel will reschedule and, upon request from ATIExcel, Verizon will credit waive the Analog 2W Loop Service Order Charge for the original Scheduled Conversion Time. 3.3.1.7 3.17.1.7 The standard time interval expected from disconnection of a live Telephone Exchange Service to the connection of the Analog 2W Loops to ATI Excel is fifteen (15) minutes per Analog 2W Loop for all orders consisting of twenty (20) Analog 2W Loops or less. Orders involving more than twenty (20) Loops will require a negotiated interval. 3.3.1.8 Conversions involving LNP will be completed according to North American Numbering Council (NANC) standards, via the regional Number Portability Administration Center (NPAC). 3.3.1.9 If ATI requires Analog 2W Loop conversions outside of the regularly scheduled Verizon RCCC operating hours, such conversions shall be separately negotiated. Additional charges (e.g. overtime labor charges) may apply for desired dates and times outside of regularly scheduled RCCC operating hours.

Conversion of Live Telephone Exchange Service to Analog 2W Loops. 3.3.1 The following coordination procedures shall apply to “live” cutovers of Verizon BA Customers who are converting their Telephone Exchange Services to ATI Mpower Telephone Exchange Services provisioned over Analog 2W unbundled Local Loops (“Analog 2W LoopsLoops”s) to be provided by Verizon BA to ATI:Mpower. 3.3.1.1 Coordinated 11.9.1 Subject to approval by the Commission, coordinated cutover charges shall apply to conversions of live Telephone Exchange Services to Analog 2W Loops. When an outside dispatch is required to perform a conversion, additional charges may apply. If ATI Mpower does not request a coordinated cutover, Verizon BA will process ATIMpower’s order as a new installation subject to applicable standard provisioning intervals. 3.3.1.2 ATI 11.9.2 Mpower shall request Analog 2W Loops Loop(s) for coordinated cutover from Verizon BA by delivering to Verizon BA a valid electronic Local Service Request (“LSR”). Xxxxxxx BA agrees to accept from ATI Mpower the date and time for the conversion designated on the LSR (“Scheduled Conversion Time”), provided that such designation is within the regularly scheduled operating hours of the Verizon BA Regional CLEC Control Center (“RCCC”) and subject to the availability of VerizonBA’s work force. In the event that XxxxxxxBA’s work force is not available, ATI Mpower and Verizon BA shall mutually agree on a New Conversion Time, as defined below. ATI Mpower shall designate the Scheduled Conversion Time subject to Verizon BA standard provisioning intervals as stated in the Verizon BA CLEC Handbook, as may be revised from time to time. Within three two (32) Business Days business days of VerizonBA's receipt of such valid LSR, or as otherwise required by Applicable Law, Verizon BA shall provide ATI Mpower the scheduled due firm order commitment (“FOC”) date for conversion of by which the Analog 2W Loops Loop(s) covered by such LSRLSR will be converted. 3.3.1.3 ATI 11.9.3 Mpower shall provide dial tone at the ATI collocation Mpower Collocation site at least forty-eight (48) hours prior to the Scheduled Conversion Time. 3.3.1.4 11.9.4 Either Party may contact the other Party to negotiate a new Scheduled Conversion Time (the “New Conversion Time”); provided, however, that each Party shall use commercially reasonable efforts to provide four (4) business hours’ advance notice to the other Party of its request for a New Conversion Time. Any Scheduled Conversion Time or New Conversion Time may not be rescheduled more than one one (1) time in a Business Daybusiness day, and any two New Conversion Times for a particular Analog 2W Loop shall differ by at least eight (8) hours, unless otherwise agreed to by the Parties. 3.3.1.5 11.9.4.1 If the New Conversion Time is more than one (1) business hour from the original Scheduled Conversion Time or from the previous New Conversion Time, the Party requesting such New Conversion Time shall be subject to the following: 3.3.1.5.1 (i) If Verizon BA requests to reschedule outside of the one (1) hour time frame above, the Analog 2W Loops Loop Service Order Charge for the original Scheduled Conversion Time or the previous New Conversion Time shall be credited waived upon request from ATIMpower; and 3.3.1.5.2 (ii) If ATI Mpower requests to reschedule outside the one (1) hour time frame above, ATI Mpower shall be charged an additional Analog 2W Loops Loop Service Order Charge for rescheduling the conversion to the New Conversion Time. 3.3.1.6 11.9.5 If ATI Mpower is not ready to accept service at the Scheduled Conversion Time or at a New Conversion Time, as applicable, an additional Service Order Charge shall apply. If Verizon BA is not available or ready to perform the conversion within thirty (30) minutes of the Scheduled Conversion Time or New Conversion Time, as applicable, Verizon BA and ATI Mpower will reschedule and, upon request from ATIMpower, Verizon BA will credit waive the Analog 2W Loop Service Order Charge for the original Scheduled Conversion Time. 3.3.1.7 11.9.6 The standard time interval expected from disconnection of a live Telephone Exchange Service to the connection of the Analog 2W Loops Loop to ATI Mpower is fifteen (15) minutes per Analog 2W Loop for all orders consisting of twenty (20) Analog 2W Loops or less. Orders involving more than twenty (20) Loops will require a negotiated interval. 3.3.1.8 11.9.7 Conversions involving LNP will be completed according to North American Numbering Council (“NANC”) standards, via the regional Number Portability Administration Center (NPAC).“NPAC”).‌‌‌‌ 3.3.1.9 11.9.8 If ATI Mpower requires Analog 2W Loop conversions outside of the regularly scheduled Verizon BA RCCC operating hours, such conversions shall be separately negotiated. Additional charges (e.g. overtime labor charges) may apply for desired dates and times outside of regularly scheduled RCCC operating hours.

Conversion of Live Telephone Exchange Service to Analog 2W Loops. 3.3.1 The following coordination procedures shall apply to “live” cutovers of Verizon Customers who are converting their Telephone Exchange Services to ATI DNA Telephone Exchange Services provisioned over Analog 2W unbundled Local Loops (“Analog 2W Loops) to be provided by Verizon to ATIDNA: 3.3.1.1 Coordinated cutover charges shall apply to conversions of live Telephone Exchange Services to Analog 2W Loops. When an outside dispatch is required to perform a conversion, additional charges may apply. If ATI DNA does not request a coordinated cutover, Verizon will process ATIDNA’s order as a new installation subject to applicable standard provisioning intervals. 3.3.1.2 ATI DNA shall request Analog 2W Loops for coordinated cutover from Verizon by delivering to Verizon a valid electronic Local Service Request (“LSR”). Xxxxxxx Verizon agrees to accept from ATI DNA the date and time for the conversion designated on the LSR (“Scheduled Conversion Time”), provided that such designation is within the regularly scheduled operating hours of the Verizon Regional CLEC Control Cont rol Center (“RCCC”) and subject to the availability of Verizon’s work force. In the event that Xxxxxxx’s work force is not available, ATI DNA and Verizon shall mutually agree on a New Conversion Time, as defined below. ATI DNA shall designate the Scheduled Conversion Time subject to Verizon standard provisioning intervals as stated in the Verizon CLEC Handbook, as may be revised from time to time. Within three (3) Business Days of Verizon's receipt of such valid LSR, or as otherwise required by Applicable Law, Verizon shall provide ATI DNA the scheduled due date for conversion of the Analog 2W Loops covered by such LSR. 3.3.1.3 ATI DNA shall provide dial tone at the ATI DNA collocation site at least forty-eight (48) hours prior to the Scheduled Conversion Time. 3.3.1.4 Either Party may contact the other Party to negotiate a new Scheduled Conversion Time (the “New Conversion Time”); provided, however, that each Party shall use commercially reasonable efforts to provide four (4) business hours’ advance notice to the other Party of its request for a New Conversion Time. Any Scheduled Conversion Time or New Conversion Time may not be rescheduled more than one (1) time in a Business Day, and any two New Conversion Times for a particular Analog 2W Loop shall differ by at least eight (8) hours, unless otherwise agreed to by the Parties. 3.3.1.5 If the New Conversion Time is more than one (1) business hour from the original Scheduled Conversion Time or from the previous New Conversion Time, the Party requesting such New Conversion Time shall be subject to the following: 3.3.1.5.1 If Verizon requests to reschedule outside of the one (1) hour time frame above, the Analog 2W Loops Service Order Charge for the original Scheduled Conversion Time or the previous New Conversion Time shall be credited upon request from ATIDNA; and 3.3.1.5.2 If ATI DNA requests to reschedule outside the one (1) hour time frame above, ATI shall be charged an additional Analog 2W Loops Service Order Charge for rescheduling the conversion to the New Conversion Time. 3.3.1.6 If ATI is not ready to accept service at the Scheduled Conversion Time or at a New Conversion Time, as applicable, an additional Service Order Charge shall apply. If Verizon is not available or ready to perform the conversion within thirty (30) minutes of the Scheduled Conversion Time or New Conversion Time, as applicable, Verizon and ATI will reschedule and, upon request from ATI, Verizon will credit the Analog 2W Loop Service Order Charge for the original Scheduled Conversion Time. 3.3.1.7 The standard time interval expected from disconnection of a live Telephone Exchange Service to the connection of the Analog 2W Loops to ATI is fifteen (15) minutes per Analog 2W Loop for all orders consisting of twenty (20) Analog 2W Loops or less. Orders involving more than twenty (20) Loops will require a negotiated interval. 3.3.1.8 Conversions involving LNP will be completed according to North American Numbering Council (NANC) standards, via the regional Number Portability Administration Center (NPAC). 3.3.1.9 If ATI requires Analog 2W Loop conversions outside of the regularly scheduled Verizon RCCC operating hours, such conversions shall be separately negotiated. Additional charges (e.g. overtime labor charges) may apply for desired dates and times outside of regularly scheduled RCCC operating hours.one

Conversion of Live Telephone Exchange Service to Analog 2W Loops. 3.3.1 3.17.1 The following coordination procedures shall apply to “live” cutovers of Verizon Customers who are converting their Telephone Exchange Services to ATI DMJ Telephone Exchange Services provisioned over Analog 2W unbundled Local Loops (“Analog 2W Loops) to be provided by Verizon to ATIDMJ: 3.3.1.1 3.17.1.1 Coordinated cutover charges shall apply to conversions of live Telephone Exchange Services to Analog 2W Loops. When an outside dispatch is required to perform a conversion, additional charges may apply. If ATI DMJ does not request a coordinated cutover, Verizon will process ATIDMJ’s order as a new installation subject to applicable standard provisioning intervals. 3.3.1.2 ATI 3.17.1.2 DMJ shall request Analog 2W Loops for coordinated cutover from Verizon by delivering to Verizon a valid electronic Local Service Request (“LSR”). Xxxxxxx Verizon agrees to accept from ATI DMJ the date and time for the conversion designated on the LSR (“Scheduled Conversion Time”), provided that such designation is within the regularly scheduled operating hours of the Verizon Regional CLEC Control Center (“RCCC”) and subject to the availability of Verizon’s work force. In the event that XxxxxxxVerizon’s work force is not available, ATI DMJ and Verizon shall mutually agree on a New Conversion Time, as defined below. ATI DMJ shall designate the Scheduled Conversion Time subject to Verizon standard provisioning intervals as stated in the Verizon CLEC Handbook, as may be revised from time to time. Within three (3) Business Days of Verizon's receipt of such valid LSR, or as otherwise required by Applicable Law, Verizon shall provide ATI DMJ the scheduled due date for conversion of the Analog 2W Loops covered by such LSR. 3.3.1.3 ATI 3.17.1.3 DMJ shall provide dial tone at the ATI collocation DMJ Collocation site at least forty-eight (48) hours prior to the Scheduled Conversion Time. 3.3.1.4 3.17.1.4 Either Party may contact the other Party to negotiate a new Scheduled Conversion Time (the “New Conversion Time”); provided, however, that each Party shall use commercially reasonable efforts to provide four (4) business hours’ advance notice to the other Party of its request for a New Conversion Time. Any Scheduled Conversion Time or New Conversion Time may not be rescheduled more than one (1) time in a Business Daybusiness day, and any two New Conversion Times for a particular Analog 2W Loop shall differ by at least eight (8) hours, unless otherwise agreed to by the Parties. 3.3.1.5 3.17.1.5 If the New Conversion Time is more than one (1) business hour from the original Scheduled Conversion Time or from the previous New Conversion Time, the Party requesting such New Conversion Time shall be subject to the following: 3.3.1.5.1 3.17.1.5.1 If Verizon requests to reschedule outside of the one (1) hour time frame above, the Analog 2W Loops Service Order Charge for the original Scheduled Conversion Time or the previous New Conversion Time shall be credited waived upon request from ATIDMJ; and 3.3.1.5.2 3.17.1.5.2 If ATI DMJ requests to reschedule outside the one one (1) hour time frame above, ATI DMJ shall be charged an additional Analog 2W Loops Service Order Charge for rescheduling the conversion to the New Conversion Time. 3.3.1.6 3.17.1.6 If ATI DMJ is not ready to accept service at the Scheduled Conversion Time or at a New Conversion Time, as applicable, an additional Service Order Charge shall apply. If Verizon is not available or ready to perform the conversion within thirty (30) minutes of the Scheduled Conversion Time or New Conversion Time, as applicable, Verizon and ATI DMJ will reschedule and, upon request from ATIDMJ, Verizon will credit waive the Analog 2W Loop Service Order Charge for the original Scheduled Conversion Time. 3.3.1.7 3.17.1.7 The standard time interval expected from disconnection of a live Telephone Exchange Service to the connection of the Analog 2W Loops to ATI DMJ is fifteen (15) minutes per Analog 2W Loop for all orders consisting of twenty (20) Analog 2W Loops or less. Orders involving more than twenty (20) Loops will require a negotiated interval. 3.3.1.8 3.17.1.8 Conversions involving LNP will be completed according to North American Numbering Council (“NANC”) standards, via the regional Number Portability Administration Center (“NPAC”). 3.3.1.9 3.17.1.9 If ATI DMJ requires Analog 2W Loop conversions outside of the regularly scheduled Verizon RCCC operating hours, such conversions shall be separately negotiated. Additional charges (e.g. overtime labor charges) may apply for desired dates and times outside of regularly scheduled RCCC operating hours.

Conversion of Live Telephone Exchange Service to Analog 2W Loops. 3.3.1 3.17.1 The following coordination procedures shall apply to “live” cutovers of Verizon Customers who are converting their Telephone Exchange Services to ATI D&E Telephone Exchange Services provisioned over Analog 2W unbundled Local Loops (“Analog 2W Loops) to be provided by Verizon to ATID&E: 3.3.1.1 3.17.1.1 Coordinated cutover charges shall apply to conversions of live Telephone Exchange Services to Analog 2W Loops. When an outside dispatch is required to perform a conversion, additional charges may apply. If ATI D&E does not request a coordinated cutover, Verizon will process ATID&E’s order as a new installation subject to applicable standard provisioning intervals. 3.3.1.2 ATI 3.17.1.2 D&E shall request Analog 2W Loops for coordinated cutover from Verizon by delivering to Verizon a valid electronic Local Service Request (“LSR”). Xxxxxxx Verizon agrees to accept from ATI D&E the date and time for the conversion designated on the LSR (“Scheduled Conversion Time”), provided that such designation is within the regularly scheduled operating hours of the Verizon Regional CLEC Control Center (“RCCC”) and subject to the availability of Verizon’s work force. In the event that XxxxxxxVerizon’s work force is not available, ATI D&E and Verizon shall mutually agree on a New Conversion Time, as defined below. ATI D&E shall designate the Scheduled Conversion Time subject to Verizon standard provisioning intervals as stated in the Verizon CLEC Handbook, as may be revised from time to time. Within three (3) Business Days business days of Verizon's ’s receipt of such valid LSR, or as otherwise required by Applicable Law, Verizon shall provide ATI D&E the scheduled due date for conversion of the Analog 2W Loops covered by such LSR. 3.3.1.3 ATI 3.17.1.3 D&E shall provide dial tone at the ATI collocation D&E Collocation site at least forty-eight (48) hours prior to the Scheduled Conversion Time. 3.3.1.4 3.17.1.4 Either Party may contact the other Party to negotiate a new Scheduled Conversion Time (the “New Conversion Time”); provided, however, that each Party shall use commercially reasonable efforts to provide four (4) business hours’ advance notice to the other Party of its request for a New Conversion Time. Any Scheduled Conversion Time or New Conversion Time may not be rescheduled more than one one (1) time in a Business Daybusiness day, and any two New Conversion Times for a particular Analog 2W Loop Loops shall differ by at least eight (8) hours, unless otherwise agreed to by the Parties. 3.3.1.5 3.17.1.5 If the New Conversion Time is more than one (1) business hour from the original Scheduled Conversion Time or from the previous New Conversion Time, the Party requesting such New Conversion Time shall be subject to the following: 3.3.1.5.1 3.17.1.5.1 If Verizon requests to reschedule outside of the one (1) hour time frame above, the Analog 2W Loops Service Order Charge for the original Scheduled Conversion Time or the previous New Conversion Time shall be credited waived upon request from ATID&E; and 3.3.1.5.2 3.17.1.5.2 If ATI D&E requests to reschedule outside the one (1) hour time frame above, ATI D&E shall be charged an additional Analog 2W Loops Service Order Charge for rescheduling the conversion to the New Conversion Time. 3.3.1.6 3.17.1.6 If ATI D&E is not ready to accept service at the Scheduled Conversion Time or at a New Conversion Time, as applicable, an additional Service Order Charge shall apply. If Verizon is not available or ready to perform the conversion within thirty (30) minutes of the Scheduled Conversion Time or New Conversion Time, as applicable, Verizon and ATI D&E will reschedule and, upon request from ATID&E, Verizon will credit waive the Analog 2W Loop Service Order Charge for the original Scheduled Conversion Time. 3.3.1.7 3.17.1.7 The standard time interval expected from disconnection of a live Telephone Exchange Service to the connection of the Analog 2W Loops to ATI D&E is fifteen (15) minutes per Analog 2W Loop for all orders consisting of twenty (20) Analog 2W Loops or less. Orders involving more than twenty (20) Loops will require a negotiated interval. 3.3.1.8 3.17.1. 8 Conversions involving LNP will be completed according to North American Numbering Council (“NANC”) standards, via the regional Number Portability Administration Center (“NPAC”). 3.3.1.9 If ATI requires Analog 2W Loop conversions outside of the regularly scheduled Verizon RCCC operating hours, such conversions shall be separately negotiated. Additional charges (e.g. overtime labor charges) may apply for desired dates and times outside of regularly scheduled RCCC operating hours.

Conversion of Live Telephone Exchange Service to Analog 2W Loops. 3.3.1 The following coordination procedures shall apply to “live” cutovers of Verizon Customers who are converting their Telephone Exchange Services to ATI Marathon Telephone Exchange Services provisioned over Analog 2W unbundled Local Loops (“Analog 2W Loops) to be provided by Verizon to ATIMarathon: 3.3.1.1 Coordinated cutover charges shall apply to conversions of live Telephone Exchange Services to Analog 2W Loops. When an outside dispatch is required to perform a conversion, additional charges may apply. If ATI Marathon does not request a coordinated cutover, Verizon will process ATIMarathon’s order as a new installation subject to applicable standard provisioning intervals. 3.3.1.2 ATI Marathon shall request Analog 2W Loops for coordinated cutover from Verizon by delivering to Verizon a valid electronic Local Service Request (“LSR”). Xxxxxxx Verizon agrees to accept from ATI Marathon the date and time for the conversion designated on the LSR (“Scheduled Conversion Time”), provided that such designation is within the regularly scheduled operating hours of the Verizon Regional CLEC Control Center (“RCCC”) and subject to the availability of Verizon’s work force. In the event that XxxxxxxVerizon’s work force is not available, ATI Marathon and Verizon shall mutually agree on a New Conversion Time, as defined below. ATI Marathon shall designate the Scheduled Conversion Time subject to Verizon standard provisioning intervals as stated in the Verizon CLEC Handbook, as may be revised from time to time. Within three (3) Business Days of Verizon's receipt of such valid LSR, or as otherwise required by Applicable Law, Verizon shall provide ATI Marathon the scheduled due date for conversion of the Analog 2W Loops covered by such LSR. 3.3.1.3 ATI Marathon shall provide dial tone at the ATI collocation Marathon Collocation site at least forty-eight (48) hours prior to the Scheduled Conversion Time. 3.3.1.4 Either Party may contact the other Party to negotiate a new Scheduled Conversion Time (the “New Conversion Time”); provided, however, that each Party shall use commercially reasonable efforts to provide four (4) business hours’ advance notice to the other Party of its request for a New Conversion Time. Any Scheduled Conversion Time or New Conversion Time may not be rescheduled more than one (1) time in a Business Day, and any two New Conversion Times for a particular Analog 2W Loop shall differ by at least eight (8) hours, unless otherwise agreed to by the Parties. 3.3.1.5 If the New Conversion Time is more than one (1) business hour from the original Scheduled Conversion Time or from the previous New Conversion Time, the Party requesting such New Conversion Time shall be subject to the following: 3.3.1.5.1 If Verizon requests to reschedule outside of the one (1) hour time frame above, the Analog 2W Loops Service Order Charge for the original Scheduled Conversion Time or the previous New Conversion Time shall be credited upon request from ATIMarathon; and 3.3.1.5.2 If ATI Marathon requests to reschedule outside the one (1) hour time frame above, ATI Marathon shall be charged an additional Analog 2W Loops Service Order Charge for rescheduling the conversion to the New Conversion Time. 3.3.1.6 If ATI Marathon is not ready to accept service at the Scheduled Conversion Time or at a New Conversion Time, as applicable, an additional Service Order Charge shall apply. If Verizon is not available or ready to perform the conversion within thirty (30) minutes of the Scheduled Conversion Time or New Conversion Time, as applicable, Verizon and ATI Marathon will reschedule and, upon request from ATIMarathon, Verizon will credit the Analog 2W Loop Service Order Charge for the original Scheduled Conversion Time. 3.3.1.7 The standard time interval expected from disconnection of a live Telephone Exchange Service to the connection of the Analog 2W Loops to ATI Marathon is fifteen (15) minutes per Analog 2W Loop for all orders consisting of twenty (20) Analog 2W Loops or less. Orders involving more than twenty (20) Loops will require a negotiated interval. 3.3.1.8 Conversions involving LNP will be completed according to North American Numbering Council (NANC) standards, via the regional Number Portability Administration Center (NPAC). 3.3.1.9 If ATI Marathon requires Analog 2W Loop conversions outside of the regularly scheduled Verizon RCCC operating hours, such conversions shall be separately negotiated. Additional charges (e.g. overtime labor charges) may apply for desired dates and times outside of regularly scheduled RCCC operating hours.desired