Common use of Correction of Subcontract Work Clause in Contracts

Correction of Subcontract Work. 8.2.1 If prior to Substantial Completion of the Subcontract Work, the Subcontract Work is found to be not in conformance with the Subcontract Documents, the Subcontractor shall promptly correct the Subcontract Work whether it had been fabricated, installed or completed, within seventy-two (72) hours after written notification from the Contractor of non- conformance. The Subcontractor shall be responsible for all costs of correcting such Subcontract Work, any additional testing, inspections, and compensation for services and expenses of the Architect/Engineer and the Contractor made necessary by the defective Subcontract Work. 8.2.2 In addition to the Subcontractor's obligations pursuant to this Article, the Subcontractor agrees to correct all Subcontract Work performed under this Master Subcontract Agreement which proves to be defective in workmanship or materials within a period of one year from the date of Substantial Completion of the Subcontract Work or for a longer period of time as may be required by the Work Order or specific warranties in the Subcontract Documents. The Subcontractor shall begin correction of such work within seven (7) days after the receipt of notice from the Contractor of such defective or non-conforming Subcontract Work. Substantial Completion occurs as defined by the Owner’s Contract Documents. In the absence of such definition, Substantial Completion of 8.2.3 The Subcontractor's correction of Subcontract Work pursuant to this Paragraph 8.2 shall not extend the correction period required by the Subcontract Documents, but if any Subcontract Work is first performed after Substantial Completion, such correction period shall be extended by the time period between Substantial Completion and the performance of that portion of Subcontract Work. The Subcontractor's obligation to correct Subcontract Work within the correction period required by the Subcontract Documents as described in this Paragraph 8.2.4 If the Subcontractor's correction or removal of Subcontract Work destroys or damages completed or partially completed work of the Owner, the Contractor or any separate contractors or subcontractors, the Subcontractor shall be responsible for the cost of correcting such destroyed or damaged construction. 8.2.5 If portions of the Subcontract Work which do not conform with the requirements of the Subcontract Documents are neither corrected by the Subcontractor nor accepted by the Contractor, the Subcontractor shall remove such Subcontract Work from the Project site if so directed by the Contractor.

Correction of Subcontract Work. 8.2.1 4.18.2.1 If prior to Substantial Completion of the Subcontract Work, the Subcontract Work is found to be not in conformance with the Subcontract Documents, the Subcontractor shall promptly correct the Subcontract Work whether it had been fabricated, installed or completed, within seventy-two (72) hours after written notification from the Contractor of non- conformance. The Subcontractor shall be responsible for all the costs of correcting such Subcontract Work, any additional testing, inspections, and compensation for services and expenses of the Architect/Engineer and the Contractor made necessary by the defective Subcontract Work. 8.2.2 4.18.2.2 In addition to the Subcontractor's obligations pursuant to this ArticleParagraph, the Subcontractor agrees to correct all Subcontract Work performed under this Master Subcontract Agreement which proves to be defective in workmanship or materials within a period of one year from the date of Substantial Completion of the Subcontract Work or for a such longer period of time as may be required by the Work Order or specific warranties in the Subcontract Documents. The Subcontractor shall begin correction of such work within seven (7) days after the receipt of notice from the Contractor of such defective or non-conforming Subcontract Work. Substantial Completion occurs as defined by the OwnerContractor’s Contract Documentswith the Owner. In the absence of such definition, Substantial Completion ofCompletion, or a designated portion, occurs on the date when construction is sufficiently complete in accordance with the Subcontract Documents so the Owner can occupy or utilize the Project, or a designated portion, for the use for which it is intended. 8.2.3 4.18.2.3 The Subcontractor's correction of Subcontract Work pursuant to this Paragraph 8.2 4.18.2 shall not extend the correction period required by the Subcontract Documents, but if any Subcontract Work is first performed after Substantial Completion, such correction period shall be extended by the time period between Substantial Completion and the performance of that portion of Subcontract Work. The Subcontractor's obligation to correct Subcontract Work within the correction period required by the Subcontract Documents as described in this ParagraphParagraph 4.18.2 does not limit the enforcement of the Subcontractor's other obligations with regard to the Agreement and the Subcontract Documents. 8.2.4 4.18.2.4 If the Subcontractor's correction or removal of Subcontract Work destroys or damages completed or partially completed work of the Owner, the Contractor or any separate contractors or subcontractorscontractors, the Subcontractor shall be responsible for the cost of correcting such destroyed or damaged construction. 8.2.5 4.18.2.5 If portions of the Subcontract Work which do not conform with the requirements of the Subcontract Documents are neither corrected by the Subcontractor nor accepted by the Contractor, the Subcontractor shall remove such Subcontract Work from the Project site if so directed by the Contractor.

Correction of Subcontract Work. 8.2.1 4.18.2.1 If prior to Substantial Completion of the Subcontract Work, the Subcontract Work is found to be not in conformance with the Subcontract Documents, the Subcontractor shall promptly correct the Subcontract Work whether it had been fabricated, installed or completed, within seventy-two (72) hours after written notification from the Contractor of non- conformance. The Subcontractor shall be responsible for all the costs of correcting such Subcontract Work, any additional testing, inspections, and compensation for services and expenses of the Architect/Engineer and the Contractor made necessary by the defective Subcontract Work. 8.2.2 4.18.2.2 In addition to the Subcontractor's obligations pursuant to this ArticleParagraph, the Subcontractor agrees to correct all Subcontract Work performed under this Master Subcontract Agreement which proves to be defective in workmanship or materials within a period of one year from the date of Substantial Completion of the Subcontract Work or for a longer period of time as may be required by the Work Order or specific warranties in the Subcontract Documents. The Subcontractor shall begin correction of such work within seven (7) days after the receipt of notice from the Contractor of such defective or non-conforming Subcontract Work. Substantial Completion occurs as defined by the Owner’s Contract Documents. In the absence of such definition, Substantial Completion ofof the Subcontract Work, or a designated portion, occurs on the date when construction is sufficiently complete in accordance with the Subcontract Documents so the Owner can occupy or utilize the 8.2.3 4.18.2.3 The Subcontractor's correction of Subcontract Work pursuant to this Paragraph 8.2 4.18.2 shall not extend the correction period required by the Subcontract Documents, but if any Subcontract Work is first performed after Substantial Completion, such correction period shall be extended by the time period between Substantial Completion and the performance of that portion of Subcontract Work. The Subcontractor's obligation to correct Subcontract Work within the correction period required by the Subcontract Documents as described in this Paragraph 8.2.4 4.18.2.4 If the Subcontractor's correction or removal of Subcontract Work destroys or damages completed or partially completed work of the Owner, the Contractor or any separate contractors or subcontractorscontractors, the Subcontractor shall be responsible for the cost of correcting such destroyed or damaged construction. 8.2.5 4.18.2.5 If portions of the Subcontract Work which do not conform with the requirements of the Subcontract Documents are neither corrected by the Subcontractor nor accepted by the Contractor, the Subcontractor shall remove such Subcontract Work from the Project site if so directed by the Contractor.

Correction of Subcontract Work. 8.2.1 If prior to Substantial Completion of the Subcontract Work, the Subcontract Work is found to be not in conformance with the Subcontract Documents, the Subcontractor shall promptly correct the Subcontract Work whether it had been fabricated, installed or completed, within seventy-two (72) hours after written notification from the Contractor of non- conformance. The Subcontractor shall be responsible for all the costs of correcting such Subcontract Work, any additional testing, inspections, and compensation for services and expenses of the Architect/Engineer and the Contractor made necessary by the defective Subcontract Work. 8.2.2 In addition to the Subcontractor's obligations pursuant to this ArticleParagraph, the Subcontractor agrees to correct all Subcontract Work performed under this Master Subcontract Agreement which proves to be defective in workmanship or materials within a period of one year from the date of Substantial Completion of the Subcontract Work or for a longer period of time as may be required by statute, the Work Order Order, or specific warranties in the Subcontract Documents. The Subcontractor shall begin correction of such work within seven (7) days after the receipt of notice from the Contractor of such defective or non-conforming Subcontract Work. Substantial Completion occurs as defined by the Owner’s Contract Documents. In the absence of such definition, Substantial Completion ofof the Subcontract Work, or a designated portion, occurs on the date when Subcontract Work is sufficiently complete in accordance with the Subcontract Documents so the Owner can occupy or utilize the Project, or a designated portion, for the use for which it is intended. 8.2.3 The Subcontractor's correction of Subcontract Work pursuant to this Paragraph 8.2 shall not extend the correction period required by the Subcontract Documents, but if any Subcontract Work is first performed after Substantial Completion, such correction period shall be extended by the time period between Substantial Completion and the performance of that portion of Subcontract Work. The Subcontractor's obligation to correct Subcontract Work within the correction period required by the Subcontract Documents as described in this Paragraph 8.2.4 If the Subcontractor's correction or removal of Subcontract Work destroys or damages completed or partially completed work of the Owner, the Contractor or any separate contractors or subcontractors, the Subcontractor shall be responsible for the cost of correcting such destroyed or damaged construction. 8.2.5 If portions of the Subcontract Work which do not conform with the requirements of the Subcontract Documents are neither corrected by the Subcontractor nor accepted by the Contractor, the Subcontractor shall remove such Subcontract Work from the Project site if so directed by the Contractor.

Correction of Subcontract Work. 8.2.1 If prior to Substantial Completion of the Subcontract Work, the Subcontract Work is found to be not in conformance with the Subcontract Documents, the Subcontractor shall promptly correct the Subcontract Work whether it had been fabricated, installed or completed, within seventy-two (72) hours after written notification from the Contractor of non- conformance. The Subcontractor shall be responsible for all costs of correcting such Subcontract Work, any additional testing, inspections, and compensation for services and expenses of the Architect/Engineer and the Contractor made necessary by the defective Subcontract Work.non- 8.2.2 In addition to the Subcontractor's obligations pursuant to this ArticleParagraph, the Subcontractor agrees to correct all Subcontract Work performed under this Master Subcontract Agreement which proves to be defective in workmanship or materials within a period of one year from the date of Substantial Completion of the Subcontract Work or for a longer period of time as may be required by statute, the Work Order or specific warranties in the Subcontract Documents. The Subcontractor shall begin correction of such work within seven (7) days after the receipt of notice from the Contractor of such defective or non-conforming Subcontract Work. Substantial Completion occurs as defined by the Owner’s Contract Documents. In the absence of such definition, Substantial Completion ofof the Subcontract Work, or a designated portion, occurs on the date when Subcontract Work is sufficiently complete in accordance with the Subcontract Documents so the Owner can occupy or utilize the Project, or a designated portion, for the use for which it is intended. 8.2.3 The Subcontractor's correction of Subcontract Work pursuant to this Paragraph 8.2 shall not extend the correction period required by the Subcontract Documents, but if any Subcontract Work is first performed after Substantial Completion, such correction period shall be extended by the time period between Substantial Completion and the performance of that portion of Subcontract Work. The Subcontractor's obligation to correct Subcontract Work within the correction period required by the Subcontract Documents as described in this Paragraph 8.2.4 If the Subcontractor's correction or removal of Subcontract Work destroys or damages completed or partially completed work of the Owner, the Contractor or any separate contractors or subcontractors, the Subcontractor shall be responsible for the cost of correcting such destroyed or damaged construction.responsible 8.2.5 If portions of the Subcontract Work which do not conform with the requirements of the Subcontract Documents are neither corrected by the Subcontractor nor accepted by the Contractor, the Subcontractor shall remove such Subcontract Work from the Project site if so directed by the Contractor.

Correction of Subcontract Work. 8.2.1 4.18.2.1 If prior to Substantial Completion of the Subcontract Work, the Subcontract Work is found to be not in conformance with the Subcontract Documents, the Subcontractor shall promptly correct the Subcontract Work whether it had been fabricated, installed or completed, within seventy-two (72) hours after written notification from the Contractor of non- conformance. The Subcontractor shall be responsible for all the costs of correcting such Subcontract Work, any additional testing, inspectionsinspec- tions, and compensation for services and expenses of the ArchitectArchi- tect/Engineer and the Contractor made necessary by the defective Subcontract Work. 8.2.2 4.18.2.2 In addition to the Subcontractor's obligations pursuant to this ArticleParagraph, the Subcontractor agrees to correct all Subcontract Work performed under this Master Subcontract Agreement which proves to be defective in workmanship or materials within a period of one year from the date of Substantial Completion of the Subcontract Work or for a longer period of time as may be required by the Work Order or specific warranties in the Subcontract Documents. The Subcontractor shall begin correction of such work within seven (7) days after the receipt of notice from the Contractor of such defective or non-conforming Subcontract Work. Substantial Completion occurs as defined de- fined by the Owner’s Contract Documents. In the absence of such definition, Substantial Completion ofof the Subcontract Work, or a designated portion, occurs on the date when construction is suffi- 8.2.3 4.18.2.3 The Subcontractor's correction of Subcontract Work pursuant pur- suant to this Paragraph 8.2 4.18.2 shall not extend the correction period required by the Subcontract Documents, but if any Subcontract Work is first performed after Substantial Completion, such correction period pe- riod shall be extended by the time period between Substantial Completion Com- pletion and the performance of that portion of Subcontract Work. The Subcontractor's obligation to correct Subcontract Work within the correction period required by the Subcontract Documents as described de- scribed in this ParagraphParagraph 4.18.2 does not limit the enforcement of the Subcontractor's other obligations with regard to the Agreement and the Subcontract Documents. 8.2.4 4.18.2.4 If the Subcontractor's correction or removal of Subcontract Subcon- tract Work destroys or damages completed or partially completed work of the Owner, the Contractor or any separate contractors or subcontractorscontractors, the Subcontractor shall be responsible for the cost of correcting such destroyed or damaged construction. 8.2.5 4.18.2.5 If portions of the Subcontract Work which do not conform with the requirements of the Subcontract Documents are neither corrected by the Subcontractor nor accepted by the Contractor, the Subcontractor shall remove such Subcontract Work from the Project site if so directed by the Contractor.