Common use of Description of Existing Facility Clause in Contracts

Description of Existing Facility. The Interconnection Customer has constructed a 2.8 MW landfill gas generation facility located at 000 Xxxx Xxxx, Albany New York (“Existing Facility”). The Existing Facility interconnects to the Connecting Transmission Owner’s 34.5 xX Xxxxxx-Patroon Line #5 (“Xxxxxx-Patroon Line #5”) via a single breaker tap arrangement. The Existing Facility consists of: Two (2) Caterpillar Model 3516 Engine Generator Sets, 0.925 MW, 1.15 MVA, each with a power factor range of 0.80 lagging to 0.90 leading, giving a total reactive capability for both units of +1.39 MVAR to -0.896 MVAR at the generator terminals; One (1) Caterpillar Model 3516 Engine Generator Set, 0.95 MW, 1.18 MVA, with a power factor range of 0.80 lagging to 0.90 leading, giving a gross a reactive capability for the unit of +.713 MVAR to -.460 MVAR at the generator terminals; One (1) three-phase 4160 V (Delta) - 480 /277 V (Wye), 300 kVA transformer, 60 kV BIL, 6.5% impedance; One (1) ancillary circuit load breaker: 4.16 kV, 1200 A, 40 kAIC, 60 kV BIL; Three (3) generator circuit breakers: 4.16 kV, 1200 A, 40 kAIC, 60 kV BIL; One (1) 4.16 kV bus that will accommodate connection and protection controls; and Utility interconnection protection equipment and relaying controls. The Point of Change of Ownership (“PCO”) for the Existing Facility is on the existing riser pole (Pole 209-2) at the 34.5 kV insulators on the line side of the Interconnection Customer’s Switch 588. The Point of Interconnection (“POI”) for the Existing Facility is the tap point (Connecting Transmission Owner’s Pole 17 ½) on the Connecting Transmission Owner’s 34.5 xX Xxxxxx-Patroon Line #5 (“Line #5), xxx xxx xxxxxxxx 0 xxxx 00.0 kV Generator Lead Line.

Description of Existing Facility. The Interconnection Customer has constructed a 2.8 MW landfill gas generation facility located at 000 Xxxx Xxxx, Albany New York (“Existing Facility”). The Existing Facility interconnects to the Connecting Transmission Owner’s 34.5 xX Xxxxxx-Patroon Line #5 (“Xxxxxx-Patroon Line #5”) via a single breaker tap arrangement. The Existing Facility consists of: • Two (2) Caterpillar Model 3516 Engine Generator Sets, 0.925 MW, 1.15 MVA, each with a power factor range of 0.80 lagging to 0.90 leading, giving a total reactive capability for both units of +1.39 MVAR to -0.896 MVAR at the generator terminals; • One (1) Caterpillar Model 3516 Engine Generator Set, 0.95 MW, 1.18 MVA, with a power factor range of 0.80 lagging to 0.90 leading, giving a gross a reactive capability for the unit of +.713 MVAR to -.460 MVAR at the generator terminals; • One (1) three-phase 4160 V (Delta) - 480 /277 V (Wye), 300 kVA transformer, 60 kV BIL, 6.5% impedance; • One (1) ancillary circuit load breaker: 4.16 kV, 1200 AX, 40 kAIC00 xXXX, 60 kV BIL00 xX XXX; • Three (3) generator circuit breakers: 4.16 kV, 1200 AX, 40 kAIC00 xXXX, 60 kV BIL00 xX XXX; • One (1) 4.16 kV bus that will accommodate connection and protection controls; and • Utility interconnection protection equipment and relaying controls. The Point of Change of Ownership (“PCO”) for the Existing Facility is on the existing riser pole (Pole 209-2) at the 34.5 kV insulators on the line side of the Interconnection Customer’s Switch 588. The Point of Interconnection (“POI”) for the Existing Facility is the tap point (Connecting Transmission Owner’s Pole 17 ½) on the Connecting Transmission Owner’s 34.5 xX Xxxxxx-Patroon Line #5 (“Line #5), xxx xxx xxxxxxxx 0 xxxx 00.0 kV Generator Lead Line.