Common use of Description of the procurement Clause in Contracts

Description of the procurement. The Architect Cutting Edge Framework is for the provision of architectural services for residential-led development projects and is split into 3 geographical lots. However, the CEF Consortium Members will reserve the right to use service providers successful on one geographical lot, within the same work stream, in another geographical lot, when no service provider within the geographical lot in question is available to undertake the relevant works and value for money can be established. The CEF Consortium Members are committed to the use of the Architects Cutting Edge Framework, and therefore bidders should anticipate that the overall value of the framework would be in line with the values identified within this contract notice. This Lot is for projects in North East England, Yorkshire (the area as more accurately described on the plan in the procurement documents) (the "Lot 2 Regions"). Riverside is looking to establish a framework of providers of architectural and principal designer services for significant development works in the Lot 2 Regions which may include but shall not be limited to: 1. sites for residential use; 2. mixed-use residential-led sites; 3. Mixed-use elements to include health facilities, education and community facilities, retail or commercial development; 4. Urban regeneration; 5. Refurbishment / retrofit of existing houses, residential buildings, empty homes and associated buildings for residential-led use; 6. Refurbishment, restoration, conversion of heritage or other buildings for residential-led use; 7. Demolition, site remediation, infrastructure and enabling works to prepare sites for residential or mixed-use development; 8. Design and construction of homes; and 9. Self-build or custom build enabling as part of a larger development. As minimum requirements, Riverside will expect, amongst other things, that the successful bidders will: 1. be capable of delivering the services in accordance with the Standard Agreement 2010 (2012 revision), the RIBA Standard Conditions of Appointment for an Architect 2010 (2012 revision) and Plan of Work 2013 as published by the Royal Institute of British Architects or an institution or association of equivalent standing in this field ("RIBA"); 2. hold appropriate qualifications accredited by RIBA as required for the delivery of architectural services; 3. be a member of RIBA and/or an institution or association of equivalent standing in this field; 4. be capable of acting as Lead Consultant and directing the design process, co-ordinating design of all constructional elements, including work by any consultants, specialists or suppliers on projects of a similar size, value and scope as those that shall be carried out pursuant to the Architects Cutting Edge Framework; 5. be capable of delivering the relevant services on projects of a similar size, value and scope as those that shall be carried out pursuant to the Architects Cutting Edge Framework; 6. be capable of delivering excellent customer care and an appreciation of the importance of maintaining clear and regular communication with clients at every stage of the project; and 7. be capable of delivering the required services in accordance with the terms of the Architect Scope of Service which are set out at in the procurement documents. The full details of Riverside's minimum requirements will be set out in the ITT. The procurement will involve a two stage process following the Public Contract Regulations 2015 restricted procedure. The framework agreement will be established for a period of 4 years. The overall value of this lot is ?875,000 - ?1,300,000.

Description of the procurement. The Architect Architects Cutting Edge Framework is for the provision of architectural services for residential-led development projects and is split into 3 geographical lots. However, the CEF Consortium Members will reserve the right to use service providers successful on one geographical lot, within the same work stream, in another geographical lot, when no service provider within the geographical lot in question is available to undertake the relevant works and value for money can be established. The CEF Consortium Members are committed to the use of the Architects Cutting Edge Framework, and therefore bidders should anticipate that the overall value of the framework would be in line with the values identified within this contract notice. This Lot is for projects in North East England, Yorkshire West England from Cheshire to Cumbria (the area as more accurately described on the plan in the procurement documents) (the "Lot 2 1 Regions"). Riverside is looking to establish a framework of providers of architectural and principal designer services for significant development works in the Lot 2 1 Regions which may include but shall not be limited to: 1. sites for residential use; 2. mixed-use residential-led sites; 3. Mixed-use elements to include health facilities, education and community facilities, retail or commercial development; 4. Urban regeneration; 5. Refurbishment / retrofit of existing houses, residential buildings, empty homes and associated buildings for residential-led use; 6. Refurbishment, restoration, conversion of heritage or other buildings for residential-led use; 7. Demolition, site remediation, infrastructure and enabling works to prepare sites for residential or mixed-use development; 8. Design and construction of homes; and 9. Self-build or custom build enabling as part of a larger development. As minimum requirements, Riverside will expect, amongst other things, that the successful bidders will: 1. be capable of delivering the services in accordance with the Standard Agreement 2010 (2012 revision), the RIBA Standard Conditions of Appointment for an Architect 2010 (2012 revision) and Plan of Work 2013 as published by the Royal Institute of British Architects or an institution or association of equivalent standing in this field ("RIBA"); 2. hold appropriate qualifications accredited by RIBA as required for the delivery of architectural services; 3. be a member of RIBA and/or an institution or association of equivalent standing in this field; 4. be capable of acting as Lead Consultant and directing the design process, co-ordinating design of all constructional elements, including work by any consultants, specialists or suppliers on projects of a similar size, value and scope as those that shall be carried out pursuant to the Architects Cutting Edge Framework; 5. be capable of delivering the relevant services on projects of a similar size, value and scope as those that shall be carried out pursuant to the Architects Cutting Edge Framework; 6. be capable of delivering excellent customer care and an appreciation of the importance of maintaining clear and regular communication with clients at every stage of the project; and 7. be capable of delivering the required services in accordance with the terms of the Architect Scope of Service which are set out at in the procurement documents. The full details of Riverside's minimum requirements will be set out in the ITT. The procurement will involve a two stage process following the Public Contract Regulations 2015 restricted procedure. The framework agreement will be established for a period of 4 years. The overall value of this lot is ?875,000 2,600,000 - ?1,300,0003,200,000.

Description of the procurement. The Architect Employer's Agent Cutting Edge Framework is for the provision of architectural employer's agent and principal designer services for residential-led development projects and is split into 3 geographical lots. However, the CEF Consortium Members will reserve the right to use service providers successful on one geographical lot, within the same work stream, in another geographical lot, when no service provider within the geographical lot in question is available to undertake the relevant works and value for money can be established. The CEF Consortium Members are committed to the use of the Architects Employer's Agent Cutting Edge Framework, and therefore bidders should anticipate that the overall value of the framework would be in line with the values identified within this contract notice. This Lot is for projects in North South East England, Yorkshire & Midlands (indicative only - the area as more accurately described on the plan in the procurement documents) (the "Lot 2 3 Regions"). Riverside is looking to establish a framework of providers of architectural employer's agent and principal designer services for significant development works in the Lot 2 3 Regions which may include but shall not be limited to: 1. sites for residential use; 2. mixed-use residential-led sites; 3. Mixed-use elements to include health facilities, education and community facilities, retail or commercial development; 4. Urban regeneration; 5. Refurbishment / retrofit of existing houses, residential buildings, empty homes and associated buildings for residential-led use; 6. Refurbishment, restoration, conversion of heritage or other buildings for residential-led use; 7. Demolition, site remediation, infrastructure and enabling works to prepare sites for residential or mixed-use development; 8. Design and construction of homes; and 9. Self-build or custom build enabling as part of a larger development. As minimum requirements, Riverside will expect, amongst other things, that the successful bidders will: 1. be capable of delivering the required services in accordance with the RICS Standard Agreement 2010 (2012 revision), the RIBA Standard Conditions Form of Appointment for an Architect 2010 (2012 revision) and Plan of Work 2013 Consultants Appointments as published by the Royal Institute of British Architects or an institution or association Chartered Surveyors and the RIBA Plan of equivalent standing in this field ("RIBA");Work 2013. 2. hold appropriate qualifications accredited by RIBA be capable of acting as required for a project lead consultant and co-ordinating the delivery activities of architectural servicesprofessional teams on projects of a similar size and scale to those that will be undertaken pursuant to the Employer's Agent Cutting Edge Framework; 3. be capable of demonstrating sufficient experience in scheduling project activities, ensuring compliance with project programmes whilst maintaining a member clear and consistent line of RIBA and/or an institution or association communication with clients on projects of equivalent standing in this fielda similar size and scale to those that will be undertaken pursuant to the Employer's Agent Cutting Edge Framework; 4. be capable of acting as Lead Consultant project delivery and directing have competencies in all aspects of the design processrequired services such as: a. chairing client, co-ordinating design of all constructional elementsdesign, including work by any consultantsproject, specialists or suppliers on projects of a similar size, value site and scope as those that shall be carried out pursuant to the Architects Cutting Edge Frameworkother meetings; 5. be capable of delivering the relevant services on projects of a similar size, value b. instructing professional teams and scope as those that shall be carried out pursuant to the Architects Cutting Edge Frameworkcontractors in accordance with contract terms; 6. be capable of delivering excellent customer care c. agreeing project reporting and an appreciation of the importance of maintaining clear recording procedures and regular communication implementing agreed procedures; d. monitoring professional team and contractor performances and reporting to clients; e. liaising with clients at every stage of the projectprofessional teams and preparing regular/monthly quality, cost and programme reports x. preparing regular/monthly cost reports and advising on decision-making and authorisations; and 75. be capable of delivering the required services in accordance with the terms of the Architect Employer's Agent Scope of Service and Principal Designer Scope of Service which are set out at in the procurement documents. The full details of Riverside's minimum requirements will be set out in the ITT. The procurement will involve a two stage process following the Public Contract Regulations 2015 restricted procedure. The framework agreement will be established for a period of 4 years. The overall value of this lot is ?875,000 - ?1,300,000.***

Description of the procurement. The Architect Contractors Cutting Edge Framework is for the provision of architectural building contractor services for residential-led development projects and is split into 3 6 geographical lots. Interested services providers are permitted to tender for EITHER: 1. A maximum of any 2 of Lots 1,2,3,4,5,6 & 7; OR 2. Lot 8 only. However, the CEF Consortium Members will reserve the right to use service providers successful on one geographical lot, within the same work stream, in another geographical lot, when no service provider within the geographical lot in question is available to undertake the relevant works and value for money can be established. The CEF Consortium Members are committed to the use of the Architects Contractors Cutting Edge Framework, and therefore bidders should anticipate that the overall value of the framework would be in line with the values identified within this contract notice. Individual project values for this lot will be up to a maximum of ?5,500,000. This Lot lot is for residential-led development projects in North East England, South Yorkshire and surrounding areas (indicative only - the area as more accurately described on the plan in the procurement documents) (the "Lot 2 7 Regions"). Riverside is looking to establish a framework of providers of architectural and principal designer building contractor services for significant development works in the Lot 2 5 Regions which may include but shall not be limited to: 1. sites for residential use; 2. mixed-use residential-led sites; 3. Mixed-use elements to include health facilities, education and community facilities, retail or commercial development; 4. Urban regeneration; 5. Refurbishment / retrofit of existing houses, residential buildings, empty homes and associated buildings for residential-led use; 6. Refurbishment, restoration, conversion of heritage or other buildings for residential-led use; 7. Demolition, site remediation, infrastructure and enabling works to prepare sites for residential or mixed-use development; 8. Design and construction of homes; and 9. Self-build or custom build enabling as part of a larger development. As minimum requirementsThe CEF Consortium Members are committed to executing projects of the above specified scope and size within this geographical lot. However due to the lack of land availability, Riverside the CEF Consortium Members will expect, amongst other things, that actively encourage suppliers to proposed land package deals throughout the duration of the framework. The CEF Consortium members will expect the successful bidders will: 1. to be fully capable of delivering development projects of similar scope and scale as those described in the services lot(s) they tender for. The CEF Consortium Members will also expect all successful bidders appointed to its panel of service providers to play an active role in accordance with delivering projects throughout the Standard Agreement 2010 (2012 revision)term of the framework agreement. Therefore, all bidders must ensure that they satisfy themselves of the RIBA Standard Conditions suitability/desirability of Appointment the anticipated typical size of projects for an Architect 2010 (2012 revision) and Plan of Work 2013 the lots they are tendering for, so as published by the Royal Institute of British Architects or an institution or association of equivalent standing to ensure their maximum participation in this field ("RIBA"); 2. hold appropriate qualifications accredited by RIBA as required for the delivery of architectural services; 3. be a member of RIBA and/or an institution or association of equivalent standing in this field; 4. be capable of acting as Lead Consultant and directing projects for the design process, co-ordinating design of all constructional elements, including work by any consultants, specialists or suppliers on projects of a similar size, value and scope as those that shall be carried out pursuant to the Architects Cutting Edge Framework; 5. be capable of delivering the relevant services on projects of a similar size, value and scope as those that shall be carried out pursuant to the Architects Cutting Edge Framework; 6. be capable of delivering excellent customer care and an appreciation entire life cycle of the importance of maintaining clear and regular communication with clients at every stage framework. Full details of the project; and 7. be capable of delivering the required services in accordance with the terms of the Architect Scope of Service which are set out at in the procurement documents. The full details of Riverside's minimum requirements will be for each lot are set out in the ITT. The procurement will involve a two stage process following the Public Contract Regulations 2015 restricted procedure. The framework agreement will be established for a period of 4 years. The overall value of this lot is ?875,000 - ?1,300,000.

Description of the procurement. The Architect Contractors Cutting Edge Framework is for the provision of architectural building contractor services for residential-led development projects and is split into 3 6 geographical lots. Interested services providers are permitted to tender for EITHER: 1. A maximum of any 2 of Lots 1,2,3,4,5,6 & 7; OR 2. Lot 8 only. However, the CEF Consortium Members will reserve the right to use service providers successful on one geographical lot, within the same work stream, in another geographical lot, when no service provider within the geographical lot in question is available to undertake the relevant works and value for money can be established. The CEF Consortium Members are committed to the use of the Architects Contractors Cutting Edge Framework, and therefore bidders should anticipate that the overall value of the framework would be in line with the values identified within this contract notice. Individual project values for this lot will be up to a maximum of ?5,500,000. This Lot lot is for residential-led development projects in North East England, West Yorkshire and surrounding areas (indicative only - the area as more accurately described on the plan in the procurement documents) (the "Lot 2 6 Regions"). Riverside is looking to establish a framework of providers of architectural and principal designer building contractor services for significant development works in the Lot 2 5 Regions which may include but shall not be limited to: 1. sites for residential use; 2. mixed-use residential-led sites; 3. Mixed-use elements to include health facilities, education and community facilities, retail or commercial development; 4. Urban regeneration; 5. Refurbishment / retrofit of existing houses, residential buildings, empty homes and associated buildings for residential-led use; 6. Refurbishment, restoration, conversion of heritage or other buildings for residential-led use; 7. Demolition, site remediation, infrastructure and enabling works to prepare sites for residential or mixed-use development; 8. Design and construction of homes; and 9. Self-build or custom build enabling as part of a larger development. As minimum requirementsThe CEF Consortium Members are committed to executing projects of the above specified scope and size within this geographical lot. However due to the lack of land availability, Riverside the CEF Consortium Members will expect, amongst other things, that actively encourage suppliers to proposed land package deals throughout the duration of the framework. The CEF Consortium members will expect the successful bidders will: 1. to be fully capable of delivering development projects of similar scope and scale as those described in the services lot(s) they tender for. The CEF Consortium Members will also expect all successful bidders appointed to its panel of service providers to play an active role in accordance with delivering projects throughout the Standard Agreement 2010 (2012 revision)term of the framework agreement. Therefore, all bidders must ensure that they satisfy themselves of the RIBA Standard Conditions suitability/desirability of Appointment the anticipated typical size of projects for an Architect 2010 (2012 revision) and Plan of Work 2013 the lots they are tendering for, so as published by the Royal Institute of British Architects or an institution or association of equivalent standing to ensure their maximum participation in this field ("RIBA"); 2. hold appropriate qualifications accredited by RIBA as required for the delivery of architectural services; 3. be a member of RIBA and/or an institution or association of equivalent standing in this field; 4. be capable of acting as Lead Consultant and directing projects for the design process, co-ordinating design of all constructional elements, including work by any consultants, specialists or suppliers on projects of a similar size, value and scope as those that shall be carried out pursuant to the Architects Cutting Edge Framework; 5. be capable of delivering the relevant services on projects of a similar size, value and scope as those that shall be carried out pursuant to the Architects Cutting Edge Framework; 6. be capable of delivering excellent customer care and an appreciation entire life cycle of the importance of maintaining clear and regular communication with clients at every stage framework. Full details of the project; and 7. be capable of delivering the required services in accordance with the terms of the Architect Scope of Service which are set out at in the procurement documents. The full details of Riverside's minimum requirements will be for each lot are set out in the ITT. The procurement will involve a two stage process following the Public Contract Regulations 2015 restricted procedure. The framework agreement will be established for a period of 4 years. The overall value of this lot is ?875,000 - ?1,300,000.

Description of the procurement. The Architect Contractors Cutting Edge Framework is for the provision of architectural building contractor services for residential-led development projects and is split into 3 8 geographical lots. However, the Interested service providers are permitted to tender for EITHER: 1. a maximum of any 2 of Lots 1,2,3,4,5,6 & 7; OR 2. this Lot 8 only. The CEF Consortium Members will reserve the right to use service providers successful on one geographical lot, within the same work stream, in another geographical lot, when no service provider within the geographical lot in question is available to undertake the relevant works and value for money can be established. The CEF Consortium Members are committed to the use of the Architects Contractors Cutting Edge Framework, and therefore bidders should anticipate that the overall value of the framework would be in line with the values identified within this contract notice. Individual project values for this lot will be over ?5,000,000. This Lot lot is for projects in across the North East England, Yorkshire of England (indicative only - the area as more accurately described on the plan in the procurement documents) documents (the "Lot 2 8 Regions"). Riverside is looking to establish a framework of providers of architectural and principal designer building contractor services for significant development works in the Lot 2 6 Regions which may include but shall not be limited to: 1. sites for residential use; 2. mixed-use residential-led sites; 3. Mixed-use elements to include health facilities, education and community facilities, retail or commercial development; 4. Urban regeneration; 5. Refurbishment / retrofit of existing houses, residential buildings, empty homes and associated buildings for residential-led use; 6. Refurbishment, restoration, conversion of heritage or other buildings for residential-led use; 7. Demolition, site remediation, infrastructure and enabling works to prepare sites for residential or mixed-use development; 8. Design and construction of homes; and 9. Self-build or custom build enabling as part of a larger development. As minimum requirementsThe CEF Consortium Members are committed to executing projects of the above specified scope and size within this geographical lot. However due to the lack of land availability, Riverside the CEF Consortium Members will expect, amongst other things, that actively encourage suppliers to proposed land package deals throughout the duration of the framework. The CEF Consortium members will expect the successful bidders will: 1. to be fully capable record of delivering development projects of similar scope and scale as those described in the services lot(s) they tender for. The CEF Consortium Members will also expect all successful bidders appointed to its panel of service providers to play an active role in accordance with delivering projects throughout the Standard Agreement 2010 (2012 revision)term of the framework agreement. Therefore, all bidders must ensure that they satisfy themselves of the RIBA Standard Conditions suitability/desirability of Appointment the anticipated typical size of projects for an Architect 2010 (2012 revision) and Plan of Work 2013 the lots they are tendering for, so as published by the Royal Institute of British Architects or an institution or association of equivalent standing to ensure their maximum participation in this field ("RIBA"); 2. hold appropriate qualifications accredited by RIBA as required for the delivery of architectural services; 3. be a member of RIBA and/or an institution or association of equivalent standing in this field; 4. be capable of acting as Lead Consultant and directing projects for the design process, co-ordinating design of all constructional elements, including work by any consultants, specialists or suppliers on projects of a similar size, value and scope as those that shall be carried out pursuant to the Architects Cutting Edge Framework; 5. be capable of delivering the relevant services on projects of a similar size, value and scope as those that shall be carried out pursuant to the Architects Cutting Edge Framework; 6. be capable of delivering excellent customer care and an appreciation entire life cycle of the importance of maintaining clear and regular communication with clients at every stage framework. Full details of the project; and 7. be capable of delivering the required services in accordance with the terms of the Architect Scope of Service which are set out at in the procurement documents. The full details of Riverside's minimum requirements will be for each lot are set out in the ITT. The procurement will involve a two stage process following the Public Contract Regulations 2015 restricted procedure. The framework agreement will be established for a period of 4 years. The overall value of projects on this lot is ?875,000 - ?1,300,000250,000,000.

Description of the procurement. The Architect Contractors Cutting Edge Framework is for the provision of architectural building contractor services for residential-led development projects and is split into 3 6 geographical lots. Interested services providers are permitted to tender for EITHER: 1. A maximum of any 2 of Lots 1,2,3,4,5,6 & 7; OR 2. Lot 8 only. However, the CEF Consortium Members will reserve the right to use service providers successful on one geographical lot, within the same work stream, in another geographical lot, when no service provider within the geographical lot in question is available to undertake the relevant works and value for money can be established. The CEF Consortium Members are committed to the use of the Architects Contractors Cutting Edge Framework, and therefore bidders should anticipate that the overall value of the framework would be in line with the values identified within this contract notice. Individual project values for this lot will be up to a maximum of ?5,500,000. This Lot lot is for residential-led development projects in North East England, Yorkshire Riding & Humber and surrounding areas (indicative only - the area as more accurately described on the plan in the procurement documents) (the "Lot 2 5 Regions"). Riverside is looking to establish a framework of providers of architectural and principal designer building contractor services for significant development works in the Lot 2 5 Regions which may include but shall not be limited to: 1. sites for residential use; 2. mixed-use residential-led sites; 3. Mixed-use elements to include health facilities, education and community facilities, retail or commercial development; 4. Urban regeneration; 5. Refurbishment / retrofit of existing houses, residential buildings, empty homes and associated buildings for residential-led use; 6. Refurbishment, restoration, conversion of heritage or other buildings for residential-led use; 7. Demolition, site remediation, infrastructure and enabling works to prepare sites for residential or mixed-use development; 8. Design and construction of homes; and 9. Self-build or custom build enabling as part of a larger development. As minimum requirementsThe CEF Consortium Members are committed to executing projects of the above specified scope and size within this geographical lot. However due to the lack of land availability, Riverside the CEF Consortium Members will expect, amongst other things, that actively encourage suppliers to proposed land package deals throughout the duration of the framework. The CEF Consortium members will expect the successful bidders will: 1. to be fully capable of delivering development projects of similar scope and scale as those described in the services lot(s) they tender for. The CEF Consortium Members will also expect all successful bidders appointed to its panel of service providers to play an active role in accordance with delivering projects throughout the Standard Agreement 2010 (2012 revision)term of the framework agreement. Therefore, all bidders must ensure that they satisfy themselves of the RIBA Standard Conditions suitability/desirability of Appointment the anticipated typical size of projects for an Architect 2010 (2012 revision) and Plan of Work 2013 the lots they are tendering for, so as published by the Royal Institute of British Architects or an institution or association of equivalent standing to ensure their maximum participation in this field ("RIBA"); 2. hold appropriate qualifications accredited by RIBA as required for the delivery of architectural services; 3. be a member of RIBA and/or an institution or association of equivalent standing in this field; 4. be capable of acting as Lead Consultant and directing projects for the design process, co-ordinating design of all constructional elements, including work by any consultants, specialists or suppliers on projects of a similar size, value and scope as those that shall be carried out pursuant to the Architects Cutting Edge Framework; 5. be capable of delivering the relevant services on projects of a similar size, value and scope as those that shall be carried out pursuant to the Architects Cutting Edge Framework; 6. be capable of delivering excellent customer care and an appreciation entire life cycle of the importance of maintaining clear and regular communication with clients at every stage framework. Full details of the project; and 7. be capable of delivering the required services in accordance with the terms of the Architect Scope of Service which are set out at in the procurement documents. The full details of Riverside's minimum requirements will be for each lot are set out in the ITT. The procurement will involve a two stage process following the Public Contract Regulations 2015 restricted procedure. The framework agreement will be established for a period of 4 years. The overall value of this lot is ?875,000 - ?1,300,000.

Description of the procurement. The Architect Contractors Cutting Edge Framework is for the provision of architectural building contractor services for residential-led development projects and is split into 3 8 geographical lots. However, the Interested service providers are permitted to tender for EITHER: 1. A maximum of any 2 of Lots 1,2,3,4,5,6 & 7; OR 2. Lot 8 only. The CEF Consortium Members will reserve the right to use service providers successful on one geographical lot, within the same work stream, in another geographical lot, when no service provider within the geographical lot in question is available to undertake the relevant works and value for money can be established. The CEF Consortium Members are committed to the use of the Architects Contractors Cutting Edge Framework, and therefore bidders should anticipate that the overall value of the framework would be in line with the values identified within this contract notice. Individual project values for this lot will be up to a maximum of ?5,500,000. This Lot lot is for residential-led development projects in North East England, Yorkshire Greater Manchester (indicative only - the area as more accurately described on the plan in the procurement documents) (the "Lot 2 Regions"). Riverside is looking to establish a framework of providers of architectural and principal designer building contractor services for significant development works in the Lot 2 Regions which may include but shall not be limited to: 1. sites for residential use; 2. mixed-use residential-led sites; 3. Mixed-use elements to include health facilities, education and community facilities, retail or commercial development; 4. Urban regeneration; 5. Refurbishment / retrofit of existing houses, residential buildings, empty homes and associated buildings for residential-led use; 6. Refurbishment, restoration, conversion of heritage or other buildings for residential-led use; 7. Demolition, site remediation, infrastructure and enabling works to prepare sites for residential or mixed-use development; 8. Design and construction of homes; and 9. Self-build or custom build enabling as part of a larger development. As minimum requirementsThe CEF Consortium Members are committed to executing projects of the above specified scope and size within this geographical lot. However due to the lack of land availability, Riverside the CEF Consortium Members will expect, amongst other things, that actively encourage suppliers to proposed land package deals throughout the duration of the framework. The CEF Consortium members will expect the successful bidders will: 1. to be fully capable of delivering development projects of similar scope and scale as those described in the services lot(s) they tender for. The CEF Consortium Members will also expect all successful bidders appointed to its panel of service providers to play an active role in accordance with delivering projects throughout the Standard Agreement 2010 (2012 revision)term of the framework agreement. Therefore, all bidders must ensure that they satisfy themselves of the RIBA Standard Conditions suitability/desirability of Appointment the anticipated typical size of projects for an Architect 2010 (2012 revision) and Plan of Work 2013 the lots they are tendering for, so as published by the Royal Institute of British Architects or an institution or association of equivalent standing to ensure their maximum participation in this field ("RIBA"); 2. hold appropriate qualifications accredited by RIBA as required for the delivery of architectural services; 3. be a member of RIBA and/or an institution or association of equivalent standing in this field; 4. be capable of acting as Lead Consultant and directing projects for the design process, co-ordinating design of all constructional elements, including work by any consultants, specialists or suppliers on projects of a similar size, value and scope as those that shall be carried out pursuant to the Architects Cutting Edge Framework; 5. be capable of delivering the relevant services on projects of a similar size, value and scope as those that shall be carried out pursuant to the Architects Cutting Edge Framework; 6. be capable of delivering excellent customer care and an appreciation entire life cycle of the importance of maintaining clear and regular communication with clients at every stage framework. Full details of the project; and 7. be capable of delivering the required services in accordance with the terms of the Architect Scope of Service which are set out at in the procurement documents. The full details of Riverside's minimum requirements will be for each lot are set out in the ITT. The procurement will involve a two stage process following the Public Contract Regulations 2015 restricted procedure. procedure The framework agreement will be established for a period of 4 years. The overall value of projects on this lot is ?875,000 - ?1,300,000120,000,000.

Description of the procurement. The Architect Contractors Cutting Edge Framework is for the provision of architectural building contractor services for residential-led development projects and is split into 3 8 geographical lots. However, the Interested service providers are permitted to tender for EITHER: 1. A maximum of any 2 of Lots 1,2,3,4,5,6 & 7; OR 2. Lot 8 only. The CEF Consortium Members will reserve the right to use service providers successful on one geographical lot, within the same work stream, in another geographical lot, when no service provider within the geographical lot in question is available to undertake the relevant works and value for money can be established. The CEF Consortium Members are committed to the use of the Architects Contractors Cutting Edge Framework, and therefore bidders should anticipate that the overall value of the framework would be in line with the values identified within this contract notice. Individual project values for this lot will be up to a maximum of ?5,500,000. This Lot lot is for residential-led development projects in North East England, Yorkshire Merseyside & Cheshire (indicative only - the area as more accurately described on the plan in the procurement documents) (the "Lot 2 1 Regions"). Riverside is looking to establish a framework of providers of architectural and principal designer building contractor services for significant development works in the Lot 2 1 Regions which may include but shall not be limited to: 1. sites for residential use; 2. mixed-use residential-led sites; 3. Mixed-use elements to include health facilities, education and community facilities, retail or commercial development; 4. Urban regeneration; 5. Refurbishment / retrofit of existing houses, residential buildings, empty homes and associated buildings for residential-led use; 6. Refurbishment, restoration, conversion of heritage or other buildings for residential-led use; 7. Demolition, site remediation, infrastructure and enabling works to prepare sites for residential or mixed-use development; 8. Design and construction of homes; and 9. Self-build or custom build enabling as part of a larger development. As minimum requirementsThe CEF Consortium Members are committed to executing projects of the above specified scope and size within this geographical lot. However due to the lack of land availability, Riverside the CEF Consortium Members will expect, amongst other things, that actively encourage suppliers to proposed land package deals throughout the duration of the framework. The CEF Consortium members will expect the successful bidders will: 1. to be fully capable of delivering development projects of similar scope and scale as those described in the services lot(s) they tender for. The CEF Consortium Members will also expect all successful bidders appointed to its panel of service providers to play an active role in accordance with delivering projects throughout the Standard Agreement 2010 (2012 revision)term of the framework agreement. Therefore, all bidders must ensure that they satisfy themselves of the RIBA Standard Conditions suitability/desirability of Appointment the anticipated typical size of projects for an Architect 2010 (2012 revision) and Plan of Work 2013 the lots they are tendering for, so as published by the Royal Institute of British Architects or an institution or association of equivalent standing to ensure their maximum participation in this field ("RIBA"); 2. hold appropriate qualifications accredited by RIBA as required for the delivery of architectural services; 3. be a member of RIBA and/or an institution or association of equivalent standing in this field; 4. be capable of acting as Lead Consultant and directing projects for the design process, co-ordinating design of all constructional elements, including work by any consultants, specialists or suppliers on projects of a similar size, value and scope as those that shall be carried out pursuant to the Architects Cutting Edge Framework; 5. be capable of delivering the relevant services on projects of a similar size, value and scope as those that shall be carried out pursuant to the Architects Cutting Edge Framework; 6. be capable of delivering excellent customer care and an appreciation entire life cycle of the importance of maintaining clear and regular communication with clients at every stage framework. Full details of the project; and 7. be capable of delivering the required services in accordance with the terms of the Architect Scope of Service which are set out at in the procurement documents. The full details of Riverside's minimum requirements will be for each lot are set out in the ITT. The procurement will involve a two stage process following the Public Contract Regulations 2015 restricted procedure. The framework agreement will be established for a period of 4 years. The overall value of projects on this lot is ?875,000 - ?1,300,000120,000,000.

Description of the procurement. The Architect Contractors Cutting Edge Framework is for the provision of architectural building contractor services for residential-led development projects and is split into 3 8 geographical lots. Interested service providers are permitted to tender for EITHER: 1. A maximum of any 2 of Lots 1,2,3,4,5,6 & 7; OR 2. Lot 8 only. However, the CEF Consortium Members will reserve the right to use service providers successful on one geographical lot, within the same work stream, in another geographical lot, when no service provider within the geographical lot in question is available to undertake the relevant works and value for money can be established. The CEF Consortium Members are committed to the use of the Architects Contractors Cutting Edge Framework, and therefore bidders should anticipate that the overall value of the framework would be in line with the values identified within this contract notice. Individual project values for this lot will be up to a maximum of ?5,500,000. This Lot lot is for residential-led development projects in North East England, Yorkshire England (indicative only - the area as more accurately described on the plan in the procurement documents) (the "Lot 2 4 Regions"). Riverside is looking to establish a framework of providers of architectural and principal designer building contractor services for significant development works in the Lot 2 4 Regions which may include but shall not be limited to: 1. sites for residential use; 2. mixed-use residential-led sites; 3. Mixed-use elements to include health facilities, education and community facilities, retail or commercial development; 4. Urban regeneration; 5. Refurbishment / retrofit of existing houses, residential buildings, empty homes and associated buildings for residential-led use; 6. Refurbishment, restoration, conversion of heritage or other buildings for residential-led use; 7. Demolition, site remediation, infrastructure and enabling works to prepare sites for residential or mixed-use development; 8. Design and construction of homes; and 9. Self-build or custom build enabling as part of a larger development. As minimum requirementsThe CEF Consortium Members are committed to executing projects of the above specified scope and size within this geographical lot. However due to the lack of land availability, Riverside the CEF Consortium Members will expect, amongst other things, that actively encourage suppliers to proposed land package deals throughout the duration of the framework. The CEF Consortium members will expect the successful bidders will: 1. to be fully capable of delivering development projects of similar scope and scale as those described in the services lot(s) they tender for. The CEF Consortium Members will also expect all successful bidders appointed to its panel of service providers to play an active role in accordance with delivering projects throughout the Standard Agreement 2010 (2012 revision)term of the framework agreement. Therefore, all bidders must ensure that they satisfy themselves of the RIBA Standard Conditions suitability/desirability of Appointment the anticipated typical size of projects for an Architect 2010 (2012 revision) and Plan of Work 2013 the lots they are tendering for, so as published by the Royal Institute of British Architects or an institution or association of equivalent standing to ensure their maximum participation in this field ("RIBA"); 2. hold appropriate qualifications accredited by RIBA as required for the delivery of architectural services; 3. be a member of RIBA and/or an institution or association of equivalent standing in this field; 4. be capable of acting as Lead Consultant and directing projects for the design process, co-ordinating design of all constructional elements, including work by any consultants, specialists or suppliers on projects of a similar size, value and scope as those that shall be carried out pursuant to the Architects Cutting Edge Framework; 5. be capable of delivering the relevant services on projects of a similar size, value and scope as those that shall be carried out pursuant to the Architects Cutting Edge Framework; 6. be capable of delivering excellent customer care and an appreciation entire life cycle of the importance of maintaining clear and regular communication with clients at every stage framework. Full details of the project; and 7. be capable of delivering the required services in accordance with the terms of the Architect Scope of Service which are set out at in the procurement documents. The full details of Riverside's minimum requirements will be for each lot are set out in the ITT. The procurement will involve a two stage process following the Public Contract Regulations 2015 restricted procedure. The framework agreement will be established for a period of 4 years. The overall value of this lot is ?875,000 - ?1,300,000.

Description of the procurement. The Architect Contractors Cutting Edge Framework is for the provision of architectural building contractor services for residential-led development projects and is split into 3 8 geographical lots. However, the Interested service providers are permitted to tender for EITHER: 1. A maximum of any 2 of Lots 1,2,3,4,5,6 & 7; OR 2. Lot 8 only. The CEF Consortium Members will reserve the right to use service providers successful on one geographical lot, within the same work stream, in another geographical lot, when no service provider within the geographical lot in question is available to undertake the relevant works and value for money can be established. The CEF Consortium Members are committed to the use of the Architects Contractors Cutting Edge Framework, and therefore bidders should anticipate that the overall value of the framework would be in line with the values identified within this contract notice. Individual project values for this lot will be up to a maximum of ?5,500,000. This Lot lot is for residential-led development projects in North East England, Yorkshire Lancashire (indicative only - the area as more accurately described on the plan in the procurement documents) (the "Lot 2 3 Regions"). Riverside is looking to establish a framework of providers of architectural and principal designer building contractor services for significant development works in the Lot 2 3 Regions which may include but shall not be limited to: 1. sites for residential use; 2. mixed-use residential-led sites; 3. Mixed-use elements to include health facilities, education and community facilities, retail or commercial development; 4. Urban regeneration; 5. Refurbishment / retrofit of existing houses, residential buildings, empty homes and associated buildings for residential-led use; 6. Refurbishment, restoration, conversion of heritage or other buildings for residential-led use; 7. Demolition, site remediation, infrastructure and enabling works to prepare sites for residential or mixed-use development; 8. Design and construction of homes; and 9. Self-build or custom build enabling as part of a larger development. As minimum requirementsThe CEF Consortium Members are committed to executing projects of the above specified scope and size within this geographical lot. However due to the lack of land availability, Riverside the CEF Consortium Members will expect, amongst other things, that actively encourage suppliers to proposed land package deals throughout the duration of the framework. The CEF Consortium members will expect the successful bidders will: 1. to be fully capable of delivering development projects of similar scope and scale as those described in the services lot(s) they tender for. The CEF Consortium Members will also expect all successful bidders appointed to its panel of service providers to play an active role in accordance with delivering projects throughout the Standard Agreement 2010 (2012 revision)term of the framework agreement. Therefore, all bidders must ensure that they satisfy themselves of the RIBA Standard Conditions suitability/desirability of Appointment the anticipated typical size of projects for an Architect 2010 (2012 revision) and Plan of Work 2013 the lots they are tendering for, so as published by the Royal Institute of British Architects or an institution or association of equivalent standing to ensure their maximum participation in this field ("RIBA"); 2. hold appropriate qualifications accredited by RIBA as required for the delivery of architectural services; 3. be a member of RIBA and/or an institution or association of equivalent standing in this field; 4. be capable of acting as Lead Consultant and directing projects for the design process, co-ordinating design of all constructional elements, including work by any consultants, specialists or suppliers on projects of a similar size, value and scope as those that shall be carried out pursuant to the Architects Cutting Edge Framework; 5. be capable of delivering the relevant services on projects of a similar size, value and scope as those that shall be carried out pursuant to the Architects Cutting Edge Framework; 6. be capable of delivering excellent customer care and an appreciation entire life cycle of the importance of maintaining clear and regular communication with clients at every stage framework. Full details of the project; and 7. be capable of delivering the required services in accordance with the terms of the Architect Scope of Service which are set out at in the procurement documents. The full details of Riverside's minimum requirements will be for each lot are set out in the ITT. The procurement will involve a two stage process following the Public Contract Regulations 2015 restricted procedure. The framework agreement will be established for a period of 4 years. The overall value of projects on this lot is ?875,000 - ?1,300,00050,000,000.