Design Certification Process Sample Clauses

Design Certification Process. 4.4.4.1. The Certificating Authority shall ensure that the Validating Authority receives all the relevant data and information, as defined in the Technical Implementation Procedures, necessary for the Validating Authority to become and remain familiar with the design and certification of the Civil Aeronautical Products that are subject to validation.
AutoNDA by SimpleDocs
Design Certification Process. The Certificating Authority shall ensure that the Validating Authority receives all the relevant data and information, as defined in the Technical Implementation Procedures, necessary for the Validating Authority to become and remain familiar with the design and certification of the Civil Aeronautical Products that are subject to validation. The Validating Authority shall issue its type certificate for an aircraft, engine or propeller when: the Certificating Authority has issued its own certificate; the Certificating Authority certifies to the Validating Authority that the product complies with the certification basis as set out in paragraph 4.4.3; all issues raised during the validation process conducted by the Validating Authority have been resolved; and additional administrative requirements, as defined in the Technical Implementation Procedures, have been met by the applicant. In order to obtain and maintain a Validated Design Certificate as per the provisions of this Annex, the applicant shall hold and retain at the disposal of the Certificating Authority all relevant design information, drawings and test reports, including inspection records for the certified product, in order to provide the information necessary to ensure the continued airworthiness and compliance with applicable environmental protection requirements of the product. Validation and automatic acceptance processes Design Certificates that have been, or are in the process of being, issued by the Certificating Authority, are either automatically accepted or validated by the Validating Authority: For certificates subject to validation, the Validating Authority issues its own Certificate through a validation process implying a commensurate level of involvement, defined in accordance with the principles of paragraph 4.4.2. and as detailed in the Technical Implementation Procedures. For certificates subject to automatic acceptance, the Validating Authority recognises and accepts the Certificating Authority’s certificates without any technical investigation or validation exercise. In this case, the certificate issued by the Certificating Authority is recognised by the Validating Authority as equivalent to its own certificate issued in accordance with its legislation and procedures. The validating Authority does not issue its own corresponding certificate. Subject to the provisions of paragraph 4.4.2, the validation process, as detailed in the Technical Implementation Procedures, shall be base...

Related to Design Certification Process

  • Contractor Certification The Department may, at its option, terminate the Contract if the Contractor is found to have submitted a false certification as provided under section 287.135(5), F.S., or been placed on the Scrutinized Companies with Activities in Sudan List or the Scrutinized Companies with Activities in the Iran Petroleum Energy Sector List, or been engaged in business operations in Cuba or Syria, or to have been placed on the Scrutinized Companies that Boycott Israel List or is engaged in a boycott of Israel.

  • CHILD SUPPORT CERTIFICATION Under Section 231.006, Texas Family Code, the Engineer certifies that the individual or business entity named in this contract, bid, or application is not ineligible to receive the specified grant, loan, or payment and acknowledges that this contract may be terminated and payment may be withheld if this certification is inaccurate. If the above certification is shown to be false, the Engineer is liable to the state for attorney’s fees, the cost necessary to complete the contract, including the cost of advertising and awarding a second contract, and any other damages provided by law or the contract. A child support obligor or business entity ineligible to receive payments because of a payment delinquency of more than thirty (30) days remains ineligible until: all arrearages have been paid; the obligor is in compliance with a written repayment agreement or court order as to any existing delinquency; or the court of continuing jurisdiction over the child support order has granted the obligor an exemption from Subsection (a) of Section 231.006, Texas Family Code, as part of a court- supervised effort to improve earnings and child support payments.

  • AS9100 Certification ‌ AS9100 Certification, specifies requirements for a quality management system to demonstrate the Contractor’s ability to consistently meet the customer requirements as well as statutory and regulatory requirements for the aerospace industry. An AS9100 Certification, is not mandatory; however, Contractors who desire to compete for work within the aerospace industry are encouraged to have AS9100 Certification, during the entire term of OASIS. The Contractor shall notify the OASIS CO, in writing, if there are any changes in the status of their AS9100 Certification, and provide the reasons for the change and copies of audits from an AS9100 Certification Body, as applicable. If only part of a Contractor’s organization is AS9100, certified, the Contractor shall make the distinction between which business units or sites and geographic locations have been certified.

  • Instructions for Certification 1. By signing and submitting this CONTRACT, the prospective lower tier participant is providing the certification set out below.

  • Owner Certification During the term of this Contract, the Owner certifies that:

  • Cost Certification Redeveloper shall submit authentic documentation to the City on approved forms or format for payment of any expenses related to construction of the eligible Redeveloper Priority Expenses. Redeveloper shall timely submit receipts, invoices, or proof of payment concurrently with the request for reimbursement of eligible Redeveloper Priority Expenses. The City shall approve or reject the request for reimbursement with reasons stated, based on the review within ten (10) business days of receipt of the same. The foregoing notwithstanding, the City reserves the right during said ten (10) day period to request additional information and documentation related to a request for reimbursement from Redeveloper, and such a request by the City shall have the effect of restarting the ten (10) day period upon receipt of all requested information. Failure of the City to reject the request for reimbursement within said ten

  • RECYCLING CERTIFICATION The Contractor shall certify in writing under penalty of perjury, the minimum, if not exact, percentage of post consumer material as defined in the Public Contract Code Section 12200, in products, materials, goods, or supplies offered or sold to the State regardless of whether the product meets the requirements of Public Contract Code Section 12209. With respect to printer or duplication cartridges that comply with the requirements of Section 12156(e), the certification required by this subdivision shall specify that the cartridges so comply (Pub. Contract Code §12205).

  • ISO 9001 Certification The Contractor shall maintain or exceed their ISO 9001 Certification and submit updates, if applicable

  • Exhibit D - Debarment Certification By signing and submitting this Contract, the Contractor is agreeing to abide by the debarment requirements as set out below. • The certification in this clause is a material representation of fact relied upon by County. • The Contractor shall provide immediate written notice to County if at any time the Contractor learns that its certification was erroneous or has become erroneous by reason of changed circumstances. • Contractor certifies that none of its principals, affiliates, agents, representatives or contractors are excluded, disqualified or ineligible for the award of contracts by any Federal agency and Contractor further certifies to the best of its knowledge and belief, that it and its principals: • Are not presently debarred, suspended, proposed for debarment, declared ineligible, or voluntarily excluded by any Federal Department or Agency; • Have not been convicted within the preceding three-years of any of the offenses listed in 2 CFR 180.800(a) or had a civil judgment rendered against it for one of those offenses within that time period; • Are not presently indicted for or otherwise criminally or civilly charged by a governmental entity (Federal, State, or Local) with commission of any of the offenses listed in 2 CFR 180.800(a); • Have not had one or more public transactions (Federal, State, or Local) terminated within the preceding three-years for cause or default. • The Contractor agrees by signing this Contract that it will not knowingly enter into any subcontract or covered transaction with a person who is proposed for debarment, debarred, suspended, declared ineligible, or voluntarily excluded from participation in this covered transaction. • Any subcontractor will provide a debarment certification that includes the debarment clause as noted in preceding bullets above, without modification.

  • Invoice Certification When and if requested by DXC, as a condition precedent to payment thereof, Supplier shall separately certify each invoice as follows: “We certify that contract deliverables listed hereon were produced in compliance with all applicable requirements of Sections 6, 7, and 12 of the Fair Labor Standards Act, as amended, and of regulations and orders of the U.S. Department of Labor issued under Section 14 thereof. We further certify that any and all additional contract deliverables will be produced in compliance with same.”

Time is Money Join Law Insider Premium to draft better contracts faster.