Designs and Drawings all the drawings and design required for obtaining the development permission and building permission and completion, the Development rules in force at the time and Chhattisgarh Bhoomi Vikas Niyam, 1984 with all amendments shall be applicable.
Designs and Drawings. (a) The Concessionaire shall prepare the detailed Designs and Drawings for the Facilities and the Associated Infrastructure in accordance with the Technical Specifications, Applicable Laws and Applicable Permits. If the Concessionaire proposes to set up the Power Plant, the Concessionaire shall also submit detailed Designs and Drawings for the Power Plant. The Designs and Drawings shall be drawn to scale, with accurate dimensions, to minimize construction delays, disputes and cost overruns and to ensure smooth construction of the Facilities. The Facilities and the Associated Infrastructure should be designed in a manner that the Concessionaire can obtain a consent to operate from the Uttar Pradesh Pollution Control Board for the operation of the Facilities and the Associated Infrastructure. The Designs and Drawings should specify:
(i) the Proposed Technology for the Varanasi STP; and
(ii) the Threshold Influent Standards proposed by the Concessionaire for the treatment of Sewage at the Varanasi STP. If there any errors or deficiencies in the Technical Specifications, the Designs and Drawings shall take into account, address or rectify such errors or deficiencies.
(b) Within 45days from the Appointed Date, the Concessionaire shall submit 4 hard copies and 1 soft copy on a compact disc of the draft Designs and Drawings to the Jal Xxxxx for its review and approval.
(c) The Jal Xxxxx shall forward all Designs and Drawings to the Project Engineer for its review and comments.
(d) The Jal Xxxxx shall also forward the hydraulic Designs and Drawings to the Indian Institute of Technology at Roorkee, Uttarakhand (IIT), for their review and approval.
(e) The Jal Nigamshall provide comments if any, on the draft Designs and Drawings (including any comments from IIT and the Project Engineer) to the Concessionaire or notify the Concessionaire of its approval of the draft Designs and Drawings within 45 days from the date of receipt of the draft Designs and Drawings. The Jal Xxxxx may require the Concessionaire to amend or modify the draft Designs and Drawings ifthe Jal Xxxxx, IIT or the Project Engineer identifies any deficiencies, inaccuracies or shortcomings in the draft Designs and Drawings. If the Concessionaire receives any comments, suggestions or instructions to modify the draft Designs and Drawings from the Jal Xxxxx, then the Concessionaire shall modify the draft Designs and Drawings to correct any such shortcomings, inaccuracies or deficiencies and/or address, in...
Designs and Drawings. APPENDIX 7...............................................................................................................................
Designs and Drawings. Where designs are prepared by the Company for the Buyer, acceptance of the Contract by the Company is conditional upon such designs having been previously approved in writing by the Buyer and where the Goods are manufactured to designs submitted by the Buyer. The Company undertakes to provide them in strict conformity with such designs but accepts no responsibility in either case for functions or purpose of the Goods. Designs, drawings, photographic images and other media prepared by the Company remain the property of the Company, unless such variation is specifically agreed in writing by the Company prior to confirmation of the Buyers order. The Company reserves the right to use such media for marketing and other purposes.
Designs and Drawings. (1) Where the Company prepares designs or drawings at the request of the customer
(a) The Customer shall approve such designs and drawings in writing and until such approval has been received the Company shall be under no liability to the Customer and any time for delivery shall not begin to run:
(b) Although the Company shall warrant as to the correct functioning of the Goods no warranty is given as to the product, for which goods are designed to manufacture:
(2) Where the Goods are manufactured to designs submitted by the Customer the Company shall be under no liability for the correct functioning of the Goods.
(3) In respect of any third parities dealing with the Goods the customer shall be responsible and undertake that the goods are safe and without risk to health when properly used and comply in all respects with all relevant statutes regulation and byelaws and standards in force at the date of delivery including without prejudice to the generality of the foregoing Xxxxxxxxx Xxx 0000 and the Health & Safety at Work Xxx 0000 and the customer shall supply in respect of the Goods such information about the use of them as complies with the Health & Safety at Work Xxx 0000 or ay amendments thereto or changes or variations thereto at the date or this Contract and proper evidence of all tests and examinations and research made in compliance with the provision of the Act.
(4) The customer’s order must be accompanied by sufficient detailed technical information to enable the company to proceed with the order forthwith.
(5) The Company is entitled to assume that all drawings, descriptions, specifications and other information supplied by the Customer to the Company whether written or verbal is in all respects completely accurate and in accordance with the Customer’s requirements and provided that the goods or materials supplied in accordance with the Customer’s designs, standards and specifications the Company shall not be responsible for the suitability or quality of the Goods.
(6) The cost of preparation of any designs or drawings prepared by the Company shall be met by the Customer.
Designs and Drawings. The Supplier shall execute the conceptual and detailed designs and the programming & engineering work, in compliance with the provisions of the Contract, or where not so specified, in accordance with good international engineering standards and practices.
Designs and Drawings. (a) All drawings, photographs, plans, capacities, weights, measurements and other particulars contained in the quotation are approximate and are intended only to be a general description the goods and/or accessories ordered. Small deviations there from shall not invalidate the contract nor be made the basis of any claim against the company.
(b) All drawings, photographs, plans, estimates and other documents shall be and remain the property of the company and shall not be used by the purchaser for any purpose other than this contract and the purchaser shall not disclose them to any third party without the company’s prior written consent.
(c) The company reserves the right to change the design and/or construction of the goods and/or accessories at any time prior to delivery without notice and without incurring any liability providing that the goods and/or accessories delivered shall be consistent with the purpose, stated by the purchaser to the company, for which the purchaser requires the goods and/or accessories and that the goods and/or accessories shall be of general nature described in the quotation.
Designs and Drawings. The feedstock facilities and the synthetic fuel production facilities for each Project, if constructed in accordance with the designs and construction drawings in respect thereof, will have the operational capabilities to produce Qualified Fuels of a quality expected to satisfy the requirements of the marketplace for synthetic coal-based fuels, and the capacities to produce Qualified Fuels as contemplated in the Base Case.
Designs and Drawings. The Designs and Drawings requiring PQA review and approval for compliance with the Project Scope will be submitted to PQA in accordance with the Implementation Schedule. PQA shall within fifteen (15) Days of receipt, return them to QICT as compliant or detailed remarks indicating any non-compliance and in case these are not returned within fifteen (15) Days as aforesaid, these shall be deemed to have been approved. The procedures for the approval of Designs and Drawings are set out in Schedule 18 (Project Execution Guidelines).
Designs and Drawings. In compliance of the obligations set forth in Clause 13.4 of this Agreement, the Operator shall furnish to the Authority, free of cost, all Designs and Drawings listed in Annex-I of this Schedule-F; provided that the Designs and Drawings relevant for design review by the Government as specified in Clause 13.4.2, shall be submitted prior to such review. For the purposes hereof, Design shall mean and include plans and Drawings of the Buses or sub-system or equipment thereof. Provided that the Operator may share only details regarding the layout of the bus and not any other propriety information.
