Detailed Specification. A. Landing area slash
1. Machine pile all slash (except for slash that is too small to be effectively piled), this would be defined as at least 4 inches in diameter, and at least 4 feet long, that is on the cleared landing during skidding and decking operations.
2. Slash piles shall be located at least 35 feet from the bole of any dead, or live tree, or equal-distance between standing dead or live trees, whichever is greater. Piles shall be free of dirt and rocks.
3. Piles shall be a minimum of 4 feet in height and 12 feet in diameter, where practicable, and as compact as possible. Pile shall be free of dirt and rocks to facilitate clean and rapid consumption.
4. Do not include stumps from landing and decking area. Construction stumps shall be yarded into locations approved by the Forest Service.
5. All material extending beyond the general contour of the piled slash shall be trimmed off and added to the pile.
6. Slash shall be scattered in areas, where necessary to use for erosion control, or where minimum pile height cannot be met.
7. A fireline that is no less than 10 foot width, to bare mineral soil shall be constructed around each slash pile.
Detailed Specification. Gas Suppression System
Detailed Specification. Item No 1 Carry out 1m x 1 m grid survey work by total station in reference to GTS benchmark or Benchmark suggested by engineer in charge along the corridor including marking of center line of alignment with GPS , taking ground level ,details of all existing structures, Electric poles, trees, overhead electrical lines including fixing necessary reference RCC pillars, establishing bench mark, establishing day light lines on ground and submission of Survey Drawing with readable spot level, longitudinal section, cross section and drawing report of survey work as directed.
a) Item shall be executed as specified in the item description and specified as below.
b) Conducting topographical survey in the specified area indicating all permanent features like Highways, Roads, Rivers, nallas, lakes, ponds, culverts, existing structures, transmission lines, telegraphs, telephones and electric poles, cross drainage works etc. and plotting the same showing true North including establishing survey reference stations including supply of all equipment, instruments, personnel, labours, etc., required to complete the work as directed by of Engineer - in - Charge.
c) Spot level with respect to GTS benchmark of Survey of India or Benchmark suggested by engineer in charge in a grid of 1 meter both ways, showing true North including establishing survey reference stations and supply of equipment, instruments, personnel, labours, etc., required to complete the work. L-section, cross section shall be prepared and submitted. Centerline and all the day light lines with respect to GPS are marked on ground surface in prior to starts the work.
d) Providing and constructing Pillars of 0.5 m x 0.5 m x 1 m at every 200m interval for TBM and PBM as required.
e) All the Drawings and report containing all the details regarding survey shall be submitted in Hard copy and Soft copy (Drawing and PDF).
f) Prepare and submit working drawings viz. i) Plan and Profile with daylight line, ii) cross sections (20m interval) for the entire corridor width including embankment, service lane, gutter etc. and iii) Longitudinal profile of side gutter in A2 drawings (both soft and hard copies) with the approval of Engineer in charge. Contractor has to submit as built drawings of all the components as directed by engineer in charge.
g) The Item shall be measured in hectare.
h) The rate includes all materials, labor, equipments, formwork, curing and painting, Printing etc. & everything required to complete this i...
Detailed Specification a. The details of the required services are outlined in the tender request email issued by SWT on [XXXX] June 2024].
b. The methods and outputs to be followed are as proposed ln the Contractor's Quote Ref: [XXXX] and
c. sent to SWT on DATE.
c. The documents described above form part of this contract.
Detailed Specification. Unless otherwise specified or authorized by the City, all labor, routine and extra work performed under this agreement shall include the furnishing of all labor, supervision, equipment, tools, fuel, materials (unless provided by the City in accordance with these documents), insurance, bonding, and all other items incidental thereto which are necessary to perform the work as specified, for Tree Pruning, Removal and Other Related Services that will promote the health, appearance, and safe management of the City’s urban forest. The Contractor shall provide a yard for parking, maintenance, and storage of all equipment at a site other than on City property and at no added cost to the City. For the convenience of the City, and only when space is available, the Contractor may be permitted to place a materials storage unit on City property. Any such storage unit so placed shall be removed from City property immediately when requested to do so by City representative
Detailed Specification. The RAF requires services of a suitable service provider to conduct an Organisational Structure Review and Skills Audit Assessment as a holistic service.
